Nicholas Stiles Wilkins
Nicholas Stiles Wilkins has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Arvind Rajendran
University of Alberta
10 shared publications James A. Sawada
Department of Chemical and Materials Engineering, University of Alberta, Donadeo Innovation Centre of Engineering, 9211-116 Street NW Edmonton, Edmonton, Alberta T6G 1H9, Canada
6 shared publicationsAlireza Lotfollahzade Moghaddam
Svante Technologies Inc., 8800 Glenlyon Pkwy, Burnaby, BC, V5J 5K3, Canada
2 shared publications- David Murray McKinnon
Svante Technologies Inc
2 shared publications Kasturi Nagesh Pai
Department of Chemical and Materials Engineering University of Alberta Edmonton Alberta Canada
2 shared publications- Ping Song
Svante Technologies Inc
2 shared publications
Latest Publications
- 13 February 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (19) , 5523-5526
Understanding the potential of a new zinc-triazolato-carbonate metal–organic framework for humid CO 2 capture processes
A new pillared-layer triazolato-carbonate metal-organic framework (MOF) was synthesized. This readily accessible ultra-microporous MOF showed good CO2 uptake. Intrigued by its relatively hydrophobic nature, we have investigated its capability for humid CO2 capture processes.
- 13 February 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (19) , 5523-5526
Understanding the potential of a new zinc-triazolato-carbonate metal–organic framework for humid CO 2 capture processes
A new pillared-layer triazolato-carbonate metal-organic framework (MOF) was synthesized. This readily accessible ultra-microporous MOF showed good CO2 uptake. Intrigued by its relatively hydrophobic nature, we have investigated its capability for humid CO2 capture processes.
- 10 December 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (51) , 24808-24831
An Explicit Dual-Site BET Isotherm Model for the Prediction of Nonideal Competitive and Cooperative Adsorption Equilibrium
- 10 December 2025
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 64 (51) , 24808-24831
An Explicit Dual-Site BET Isotherm Model for the Prediction of Nonideal Competitive and Cooperative Adsorption Equilibrium
- Open Access
- 10 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Pilot-Scale Demonstration of a Laminate-Based CALF-20 Rapid Cycle Pressure-Vacuum Swing Adsorption Process for Carbon Capture
A pilot-scale rapid-cycle pressure-vacuum swing adsorption (PVSA) process study was conducted using the metal-organic framework (MOF) CALF-20 in structured laminate and packed beds for dry carbon capture. This study evaluated the benefits of structured laminate adsorbent beds in (≈ 94.5 mol%). The laminate-bed productivities could be up to 3.2 times greater than the packed-bed contactor (depending on the chosen cycle and inlet composition).
- 10 December 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPilot-Scale Demonstration of a Laminate-Based CALF-20 Rapid Cycle Pressure-Vacuum Swing Adsorption Process for Carbon Capture
A pilot-scale rapid-cycle pressure-vacuum swing adsorption (PVSA) process study was conducted using the metal-organic framework (MOF) CALF-20 in structured laminate and packed beds for dry carbon capture. This study evaluated the benefits of structured laminate adsorbent beds in (≈ 94.5 mol%). The laminate-bed productivities could be up to 3.2 times greater than the packed-bed contactor (depending on the chosen cycle and inlet composition).
- Open Access
- 25 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
An explicit dual-site BET isotherm model for the prediction of nonideal competitive and cooperative adsorption equilibrium
A dual-site extension is proposed to the previously derived ideal adsorbed solution theory analytical solution for two coadsorbing single-site BET isotherms. The proposed dual-site BET (DSBET) isotherm model is described in detail, along with multiple possible simplifications for real systems, including modeling humid carbon capture (CO2/H2O mixtures) using amine-functionalized chemisorbents and activated alumina. These simplifications allow nonideal binary equilibrium predictions of single-site Langmuir or dual-site Langmuir isotherm models (type-1 isotherms) coadsorbing with type-2 or type-3 isotherms as either a single-site BET or a dual-site BET isotherm model. The GAB isotherm could also be utilized in the proposed model via a change of variables. Many of the same advantages seen by the extended dual-site Langmuir isotherm are found for the dual-site BET isotherm. These include at least two distinct multicomponent equilibrium predictions per binary gas pairing and the ability to predict nonideal coadsorption. The choice of nonlinearity parameters (and their corresponding adsorption-site) is discussed along with their implications in coadsorption equilibrium prediction. A generalized single-site and dual-site BET isotherm model was also derived to extend multicomponent loading predictions to any number of components in a coadsorbing mixture. The DSBET isotherm model is able to predict nonideal adsorption equilibrium for both competitive and cooperative systems. This is demonstrated using hypothetical binary mixtures of DSBET isotherms and their IAST solutions, as well as loading deviation plots quantifying their difference from the unary DSBET prediction. Multiple DSBET isotherm model examples are shown for both hypothetical and experimental systems. Experimental examples include CO2/H2O mixtures on an amine-functionalized polymer (Lewatit VP OC 1065) and F-200 activated alumina.
- 25 July 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessAn explicit dual-site BET isotherm model for the prediction of nonideal competitive and cooperative adsorption equilibrium
A dual-site extension is proposed to the previously derived ideal adsorbed solution theory analytical solution for two coadsorbing single-site BET isotherms. The proposed dual-site BET (DSBET) isotherm model is described in detail, along with multiple possible simplifications for real systems, including modeling humid carbon capture (CO2/H2O mixtures) using amine-functionalized chemisorbents and activated alumina. These simplifications allow nonideal binary equilibrium predictions of single-site Langmuir or dual-site Langmuir isotherm models (type-1 isotherms) coadsorbing with type-2 or type-3 isotherms as either a single-site BET or a dual-site BET isotherm model. The GAB isotherm could also be utilized in the proposed model via a change of variables. Many of the same advantages seen by the extended dual-site Langmuir isotherm are found for the dual-site BET isotherm. These include at least two distinct multicomponent equilibrium predictions per binary gas pairing and the ability to predict nonideal coadsorption. The choice of nonlinearity parameters (and their corresponding adsorption-site) is discussed along with their implications in coadsorption equilibrium prediction. A generalized single-site and dual-site BET isotherm model was also derived to extend multicomponent loading predictions to any number of components in a coadsorbing mixture. The DSBET isotherm model is able to predict nonideal adsorption equilibrium for both competitive and cooperative systems. This is demonstrated using hypothetical binary mixtures of DSBET isotherms and their IAST solutions, as well as loading deviation plots quantifying their difference from the unary DSBET prediction. Multiple DSBET isotherm model examples are shown for both hypothetical and experimental systems. Experimental examples include CO2/H2O mixtures on an amine-functionalized polymer (Lewatit VP OC 1065) and F-200 activated alumina.
- Open Access
- 21 November 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Steam adsorption equilibrium data at 110°C on an activated carbon, Lewatit VP OC 1065, and CALF-20 using a microscale dynamic column breakthrough apparatus
Steam adsorption equilibrium data is important for many carbon capture applications, including direct-air capture, point-source, and pre-combustion carbon capture. However, there is a dearth of concentrated unary equilibrium data for H2O at temperatures greater than 100°C. In this study, unary steam adsorption equilibrium data was measured at 110°C and up to approximately 1.0 bar partial pressure with a steam microscale dynamic column breakthrough (μDCB) apparatus using a milligram quantities of adsorbent. These partial pressures are equivalent to those used in industrial carbon capture processes. The construction of the apparatus is detailed, along with the necessary calibrations and validations to ensure accurate equilibrium measurement. Three adsorbents were considered in this study: an activated carbon (Calgon BPL), an amine-functionalized polymer (Lewatit VP OC 1065), and a metal-organic framework (CALF-20). It was observed that steam adsorbs strongly on all three materials at 110°C. Activated carbon and Lewatit displayed type-3 isotherm shapes, and CALF-20 displayed a type-5 isotherm shape. Activated carbon and Lewatit were modeled with the GAB isotherm, and CALF-20 was modeled with the cubic-Langmuir isotherm. The 110°C data was compared against H2O equilibrium data collected at 25°C as a function of relative pressure. An in-house dynamic column breakthrough simulator coded in MATLAB was able to predict the μDCB composition breakthrough curves well for all three materials. The data obtained from the steam breakthrough experiments has important process implications and highlights the need to measure steam adsorption data for any proposed carbon capture material.
- 21 November 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSteam adsorption equilibrium data at 110°C on an activated carbon, Lewatit VP OC 1065, and CALF-20 using a microscale dynamic column breakthrough apparatus
Steam adsorption equilibrium data is important for many carbon capture applications, including direct-air capture, point-source, and pre-combustion carbon capture. However, there is a dearth of concentrated unary equilibrium data for H2O at temperatures greater than 100°C. In this study, unary steam adsorption equilibrium data was measured at 110°C and up to approximately 1.0 bar partial pressure with a steam microscale dynamic column breakthrough (μDCB) apparatus using a milligram quantities of adsorbent. These partial pressures are equivalent to those used in industrial carbon capture processes. The construction of the apparatus is detailed, along with the necessary calibrations and validations to ensure accurate equilibrium measurement. Three adsorbents were considered in this study: an activated carbon (Calgon BPL), an amine-functionalized polymer (Lewatit VP OC 1065), and a metal-organic framework (CALF-20). It was observed that steam adsorbs strongly on all three materials at 110°C. Activated carbon and Lewatit displayed type-3 isotherm shapes, and CALF-20 displayed a type-5 isotherm shape. Activated carbon and Lewatit were modeled with the GAB isotherm, and CALF-20 was modeled with the cubic-Langmuir isotherm. The 110°C data was compared against H2O equilibrium data collected at 25°C as a function of relative pressure. An in-house dynamic column breakthrough simulator coded in MATLAB was able to predict the μDCB composition breakthrough curves well for all three materials. The data obtained from the steam breakthrough experiments has important process implications and highlights the need to measure steam adsorption data for any proposed carbon capture material.
- 8 May 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (10) , 5445
2023 Co‐winner of the Award for Best Graduate Student Paper
- 8 May 2023
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 101 (10) , 5445
2023 Co‐winner of the Award for Best Graduate Student Paper
- 27 June 2022
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 100 (9) , 2374-2393
Optimization of pressure‐vacuum swing adsorption processes for nitrogen rejection from natural gas streams using a nitrogen selective metal organic framework
A vanadium(II/III) metal–organic framework (MOF), V2Cl2.8(btdd), that is selective to N2 over CH4 was recently discovered. Process optimizations were performed to determine the performance of this MOF to reach the pipeline transport purity of 96 mol% CH4. Two cycles were considered: the basic three‐step cycle and the Skarstrom cycle. First, the three‐step cycle was considered with a wide range of operating conditions. Three inlet compositions (55/45, 80/20, and 92/8 mol% CH4/N2), three process temperatures (30, 40, and 50°C) and a range of adsorption pressures (100–500 kPa) were considered. A detailed process model in tandem with machine learning‐aided optimization was employed to determine the optimal set of operating conditions. The three‐step cycle was unable to meet the 96 mol% CH4 purity requirement in most cases studied. However, the Skarstrom cycle was able to meet the 96 mol% CH4 purity requirement in all cases studied. The maximum recovery, at a purity of 96 mol%, was at 84.2% for the Skarstrom cycle with a methane feed composition of 80 mol% at 50°C and an adsorption pressure of 100 kPa. For the Skarstrom cycle, at a feed temperature of 50°C, an adsorption pressure of 100 kPa and a feed methane composition of 92 mol%, the productivity could be as high as 21.18 tonnes per day CH4 m−3 at a recovery of 73%. The achievable recovery‐productivity values were comparable to a carbon molecular sieve process reported in the literature at similar operating conditions.
- 27 June 2022
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 100 (9) , 2374-2393
Optimization of pressure‐vacuum swing adsorption processes for nitrogen rejection from natural gas streams using a nitrogen selective metal organic framework
A vanadium(II/III) metal–organic framework (MOF), V2Cl2.8(btdd), that is selective to N2 over CH4 was recently discovered. Process optimizations were performed to determine the performance of this MOF to reach the pipeline transport purity of 96 mol% CH4. Two cycles were considered: the basic three‐step cycle and the Skarstrom cycle. First, the three‐step cycle was considered with a wide range of operating conditions. Three inlet compositions (55/45, 80/20, and 92/8 mol% CH4/N2), three process temperatures (30, 40, and 50°C) and a range of adsorption pressures (100–500 kPa) were considered. A detailed process model in tandem with machine learning‐aided optimization was employed to determine the optimal set of operating conditions. The three‐step cycle was unable to meet the 96 mol% CH4 purity requirement in most cases studied. However, the Skarstrom cycle was able to meet the 96 mol% CH4 purity requirement in all cases studied. The maximum recovery, at a purity of 96 mol%, was at 84.2% for the Skarstrom cycle with a methane feed composition of 80 mol% at 50°C and an adsorption pressure of 100 kPa. For the Skarstrom cycle, at a feed temperature of 50°C, an adsorption pressure of 100 kPa and a feed methane composition of 92 mol%, the productivity could be as high as 21.18 tonnes per day CH4 m−3 at a recovery of 73%. The achievable recovery‐productivity values were comparable to a carbon molecular sieve process reported in the literature at similar operating conditions.
- 6 June 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (29) , 10777-10790
Diffusion of CH4 and N2 in Barium-Exchanged Reduced Pore Zorite (Ba-RPZ) and Zeolite 4A
- 6 June 2021
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 60 (29) , 10777-10790
Diffusion of CH4 and N2 in Barium-Exchanged Reduced Pore Zorite (Ba-RPZ) and Zeolite 4A