Steam adsorption equilibrium data at 110°C on an activated carbon, Lewatit VP OC 1065, and CALF-20 using a microscale dynamic column breakthrough apparatus
Preprint
- 21 November 2023
- preprint
- Published by American Chemical Society (ACS) in ChemRxiv
Abstract
Steam adsorption equilibrium data is important for many carbon capture applications, including direct-air capture, point-source, and pre-combustion carbon capture. However, there is a dearth of concentrated unary equilibrium data for H2O at temperatures greater than 100°C. In this study, unary steam adsorption equilibrium data was measured at 110°C and up to approximately 1.0 bar partial pressure with a steam microscale dynamic column breakthrough (μDCB) apparatus using a milligram quantities of adsorbent. These partial pressures are equivalent to those used in industrial carbon capture processes. The construction of the apparatus is detailed, along with the necessary calibrations and validations to ensure accurate equilibrium measurement. Three adsorbents were considered in this study: an activated carbon (Calgon BPL), an amine-functionalized polymer (Lewatit VP OC 1065), and a metal-organic framework (CALF-20). It was observed that steam adsorbs strongly on all three materials at 110°C. Activated carbon and Lewatit displayed type-3 isotherm shapes, and CALF-20 displayed a type-5 isotherm shape. Activated carbon and Lewatit were modeled with the GAB isotherm, and CALF-20 was modeled with the cubic-Langmuir isotherm. The 110°C data was compared against H2O equilibrium data collected at 25°C as a function of relative pressure. An in-house dynamic column breakthrough simulator coded in MATLAB was able to predict the μDCB composition breakthrough curves well for all three materials. The data obtained from the steam breakthrough experiments has important process implications and highlights the need to measure steam adsorption data for any proposed carbon capture material.Keywords
All Related Versions
This publication has 48 references indexed in Scilit:
- Challenges in characterizing adsorbents for gas storage and separationAdsorption, 2023
- The Challenge of Water Competition in Physical Adsorption of CO2 by Porous Solids for Carbon Capture Applications – A Short PerspectiveAdvanced Materials, 2023
- Steam adsorption on molecular sieve 3A for sorption enhanced reaction processesAdsorption, 2020
- Dynamic column breakthrough experiments for measurement of adsorption equilibrium and kineticsAdsorption, 2020
- Analysis of direct capture of ${\hbox {CO}}_{2}$ from ambient air via steam-assisted temperature–vacuum swing adsorptionAdsorption, 2020
- Cycle design and optimization of pressure swing adsorption cycles for pre-combustion CO2 captureApplied Energy, 2019
- Measurement of competitive CO2 and N2 adsorption on Zeolite 13X for post-combustion CO2 captureAdsorption, 2019
- Modeling the extra-column volume in a small column setup for bulk gas adsorptionAdsorption, 2012
- Water adsorption and desorption on microporous solids at elevated temperatureJournal of Thermal Analysis and Calorimetry, 2005
- Pore size distribution of BPL activated carbon determined by different methodsCarbon, 1994