Genki Yoshikawa
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Genki Yoshikawa has a total of 110 co-authors. Here are the top co-authors by number of shared publications:
- Kosuke Minami
Research Center for Macromolecules and Biomaterials, National Institute for Materials Science, 1-1 Namiki, Tsukuba, Ibaraki 305-0044, Japan
30 shared publications - Kota Shiba
Research Center for Macromolecules and Biomaterials (RCMB) National Institute for Materials Science (NIMS) Tsukuba Ibaraki Japan
24 shared publications - Gaku Imamura
World Premier International (WPI) Research Center for Materials Nanoarchitectonics (MANA), National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba 305-0044, Japan
12 shared publications - Ryo Tamura
National Institute for Materials Science
5 shared publications - Chao Zhuang
Materials Science and Engineering, Graduate School of Pure and Applied Science, University of Tsukuba, 1-1-1 Tennodai, Tsukuba, Ibaraki, 305-8571, Japan
4 shared publications - Tanju Yildirim
Research Center for Macromolecules and Biomaterials, National Institute for Materials Science (NIMS) 1 , 1-1 Namiki, Tsukuba, Ibaraki 305-0044
4 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by Elsevier in Smart Agricultural Technology
- Vol. 15
Odor-based real-time detection of maize plants under attack by pests: proof of concept
- 29 September 2026
- Published by Elsevier in Smart Agricultural Technology
- Vol. 15
Open AccessOdor-based real-time detection of maize plants under attack by pests: proof of concept
- Open Access
- 8 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (37) , 52728-52737
Harnessing Explainable AI to Explore Structure–Activity Relationships in Artificial Olfaction
Chemical sensor arrays mimic the mammalian olfactory system to achieve artificial olfaction, and receptor materials resembling olfactory receptors are being actively developed. To realize practical artificial olfaction, it is essential to provide guidelines for developing effective receptor materials based on the structure-activity relationship. In this study, we demonstrated the visualization of the relationship between sensing signal features and odorant molecular features using an explainable AI (XAI) technique. We focused on classification tasks and employed a convolutional neural network (CNN) and score-class activation mapping (Score-CAM) methods. The results obtained from analyzing the 94 odor samples prepared using pure solvents indicate that the information regarding the active receptor materials and data points in the signals and the structure-activity relationship could be accurately extracted. Therefore, using XAI techniques to analyze sensor signals from odor data is an important technique for advancing artificial olfaction.
- 8 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (37) , 52728-52737
Open AccessHarnessing Explainable AI to Explore Structure–Activity Relationships in Artificial Olfaction
Chemical sensor arrays mimic the mammalian olfactory system to achieve artificial olfaction, and receptor materials resembling olfactory receptors are being actively developed. To realize practical artificial olfaction, it is essential to provide guidelines for developing effective receptor materials based on the structure-activity relationship. In this study, we demonstrated the visualization of the relationship between sensing signal features and odorant molecular features using an explainable AI (XAI) technique. We focused on classification tasks and employed a convolutional neural network (CNN) and score-class activation mapping (Score-CAM) methods. The results obtained from analyzing the 94 odor samples prepared using pure solvents indicate that the information regarding the active receptor materials and data points in the signals and the structure-activity relationship could be accurately extracted. Therefore, using XAI techniques to analyze sensor signals from odor data is an important technique for advancing artificial olfaction.
- Open Access
- 27 August 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (35) , 19306-19312
An Analytical Model of Sorption-Induced Static Mode Nanomechanical Sensing for Multicomponent Analytes
Nanomechanical sensors and their arrays have attracted significant attention for detecting, distinguishing, and identifying target analytes, especially complex mixtures of odors. In the static mode operation, sensing signals are obtained by a concentration-dependent sorption-induced mechanical strain/stress. Understanding of the dynamic responses is crucial for developing practical artificial olfaction; however, the analytical formulations are still limited to single-component analytes. Here, we derive an analytical model of viscoelastic material-based static mode nanomechanical sensing for multicomponent analytes by extending the theoretical model via solving differential equations. The present model can reduce the dynamic responses to the multicomponent target analytes observed in the experimental signal responses. Moreover, the use of optimized fitting parameters extracted from pure vapors with viscoelastic parameters allows us to predict the concentration of each analyte in the multicomponent system.
- 27 August 2025
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 97 (35) , 19306-19312
Open AccessAn Analytical Model of Sorption-Induced Static Mode Nanomechanical Sensing for Multicomponent Analytes
Nanomechanical sensors and their arrays have attracted significant attention for detecting, distinguishing, and identifying target analytes, especially complex mixtures of odors. In the static mode operation, sensing signals are obtained by a concentration-dependent sorption-induced mechanical strain/stress. Understanding of the dynamic responses is crucial for developing practical artificial olfaction; however, the analytical formulations are still limited to single-component analytes. Here, we derive an analytical model of viscoelastic material-based static mode nanomechanical sensing for multicomponent analytes by extending the theoretical model via solving differential equations. The present model can reduce the dynamic responses to the multicomponent target analytes observed in the experimental signal responses. Moreover, the use of optimized fitting parameters extracted from pure vapors with viscoelastic parameters allows us to predict the concentration of each analyte in the multicomponent system.
- 9 June 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 111 (6) , 065407
Analytical modeling and decoupling of humidity effects in nanomechanical sensing based on sorption kinetics and viscoelastic stress relaxation
Nanomechanical sensors have gained significant attention as powerful tools for detecting target analytes; however, their signals are often influenced by environmental humidity. In static mode operation, the sensing signals of nanomechanical sensors are obtained by a concentration-dependent sorption-induced mechanical strain/stress. In this study, we derive an analytical model to describe the response of viscoelastic material-coated nanomechanical sensors by incorporating humidity effects based on sorption kinetics and viscoelastic stress relaxation of receptor materials. This model is capable of reproducing the dynamic responses observed in the experiments under varying humidity conditions. Moreover, it allows for the subtraction of humidity effects, facilitating the precise isolation of analyte-specific signals. These results provide a theoretical framework for decoupling environmental background factors, such as humidity effects, in nanomechanical sensors.
- 9 June 2025
- Published by American Physical Society (APS) in Physical Review E
- Vol. 111 (6) , 065407
Analytical modeling and decoupling of humidity effects in nanomechanical sensing based on sorption kinetics and viscoelastic stress relaxation
Nanomechanical sensors have gained significant attention as powerful tools for detecting target analytes; however, their signals are often influenced by environmental humidity. In static mode operation, the sensing signals of nanomechanical sensors are obtained by a concentration-dependent sorption-induced mechanical strain/stress. In this study, we derive an analytical model to describe the response of viscoelastic material-coated nanomechanical sensors by incorporating humidity effects based on sorption kinetics and viscoelastic stress relaxation of receptor materials. This model is capable of reproducing the dynamic responses observed in the experiments under varying humidity conditions. Moreover, it allows for the subtraction of humidity effects, facilitating the precise isolation of analyte-specific signals. These results provide a theoretical framework for decoupling environmental background factors, such as humidity effects, in nanomechanical sensors.
- Open Access
- 28 May 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (17)
Molecular Nanoarchitectonic Sensing Layer for Analysis of Volatile Fatty Acids in Bioreactor Headspaces Using a Nanomechanical Sensor
Anaerobic digestors (ADs) have the potential to become a major green energy source in a future sustainable society. To achieve this, effective operational parameters of the reactors must be established and maintained preferably by automation. In situ monitoring and control of AD systems is currently a challenging matter based on inconsistent feedstuff composition and the complexity of the biological processes involved, so that reactor shutdowns associated with costly downtime are a common problem. Here, a sensing device is developed for the monitoring of volatile fatty acids (VFAs), key intermediates during bioreactor operation, in the headspaces of anaerobic reactors. The device is compact, contains a sensing element based on a self‐assembled molecular layer in conjunction with a nanomechanical sensor, and can be used to monitor VFA contents in bioreactors by estimating their relative contents in the reactor headspace in real time. This device allows the close monitoring of VFA concentrations in admixture toward cost‐effective operation of bioreactors by reducing or eliminating reactor downtime. It represents a simple solution to the problem of real‐time reactor monitoring, making anaerobic digesters a realistic alternative energy source.
- 28 May 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (17)
Open AccessMolecular Nanoarchitectonic Sensing Layer for Analysis of Volatile Fatty Acids in Bioreactor Headspaces Using a Nanomechanical Sensor
Anaerobic digestors (ADs) have the potential to become a major green energy source in a future sustainable society. To achieve this, effective operational parameters of the reactors must be established and maintained preferably by automation. In situ monitoring and control of AD systems is currently a challenging matter based on inconsistent feedstuff composition and the complexity of the biological processes involved, so that reactor shutdowns associated with costly downtime are a common problem. Here, a sensing device is developed for the monitoring of volatile fatty acids (VFAs), key intermediates during bioreactor operation, in the headspaces of anaerobic reactors. The device is compact, contains a sensing element based on a self‐assembled molecular layer in conjunction with a nanomechanical sensor, and can be used to monitor VFA contents in bioreactors by estimating their relative contents in the reactor headspace in real time. This device allows the close monitoring of VFA concentrations in admixture toward cost‐effective operation of bioreactors by reducing or eliminating reactor downtime. It represents a simple solution to the problem of real‐time reactor monitoring, making anaerobic digesters a realistic alternative energy source.
- 21 April 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (16)
Observation of odd–even effect in 1-alcohols through pentapeptide-coated quartz crystal microbalance sensors with molecular docking study
The discrimination between odd and even carbon chain molecules is crucial in detecting odd chain metabolites resulting from impaired biosynthetic processes. However, the discrimination of these metabolomes via gas sensors presents significant challenges due to the lack of connection between material–gas interaction and odd–even carbon chain molecules. In this study, a homologous series of 1-alcohols is systematically investigated, quantitatively comparing the measured signals obtained using pentapeptide-coated gas sensors and pentapeptide–gas interactions calculated via molecular docking simulations. The pentapeptide-coated gas sensor exhibits a clear odd–even effect in both absorption and desorption processes, demonstrating better discrimination between odd- and even-numbered carbon compounds. The results indicate that the odd–even effect during the absorption process is closely associated with the hydrophobic interaction between a pentapeptide and a gas molecule, while the interactions affecting the desorption phase may vary depending on the pentapeptide properties. The insights into the molecular interactions involved in the odd–even effect will facilitate the development of materials for detecting odd chain metabolites, which can enhance the accuracy of gas-sensing technologies toward health monitoring applications.
- 21 April 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (16)
Observation of odd–even effect in 1-alcohols through pentapeptide-coated quartz crystal microbalance sensors with molecular docking study
The discrimination between odd and even carbon chain molecules is crucial in detecting odd chain metabolites resulting from impaired biosynthetic processes. However, the discrimination of these metabolomes via gas sensors presents significant challenges due to the lack of connection between material–gas interaction and odd–even carbon chain molecules. In this study, a homologous series of 1-alcohols is systematically investigated, quantitatively comparing the measured signals obtained using pentapeptide-coated gas sensors and pentapeptide–gas interactions calculated via molecular docking simulations. The pentapeptide-coated gas sensor exhibits a clear odd–even effect in both absorption and desorption processes, demonstrating better discrimination between odd- and even-numbered carbon compounds. The results indicate that the odd–even effect during the absorption process is closely associated with the hydrophobic interaction between a pentapeptide and a gas molecule, while the interactions affecting the desorption phase may vary depending on the pentapeptide properties. The insights into the molecular interactions involved in the odd–even effect will facilitate the development of materials for detecting odd chain metabolites, which can enhance the accuracy of gas-sensing technologies toward health monitoring applications.
- Open Access
- 29 November 2024
- Published by Wiley in Advanced Sensor Research
- Vol. 4 (4)
Empirical Modification of Force Fields for the Development of Peptide‐Based Gas Sensors
Molecular dynamics models combined with computational approaches can be used as advanced screening techniques for finding highly efficient material‐molecule interactions based on binding affinity, including in the development of gas sensors. However, most models are originally designed for liquid phase interactions, which do not align with gas sensing conditions, resulting in lower‐than‐expected performance. This study introduces an empirical modification method to adjust peptide interaction models for a gas phase, aiming to better accommodate the interaction between pentapeptides and target gas molecules. By adapting the weights of terms in the Gibbs free energy equation given in an empirical force field model, we demonstrate a significant increase in the absolute value of coefficient of determination (R02) , from an average of 0.05 with conventional liquid phase models to 0.90 with proposed gas phase models. An empirical modification technique for gas phase interactions markedly enhances the prediction accuracy of models, facilitating the effective development of peptide‐based gas sensors.
- 29 November 2024
- Published by Wiley in Advanced Sensor Research
- Vol. 4 (4)
Open AccessEmpirical Modification of Force Fields for the Development of Peptide‐Based Gas Sensors
Molecular dynamics models combined with computational approaches can be used as advanced screening techniques for finding highly efficient material‐molecule interactions based on binding affinity, including in the development of gas sensors. However, most models are originally designed for liquid phase interactions, which do not align with gas sensing conditions, resulting in lower‐than‐expected performance. This study introduces an empirical modification method to adjust peptide interaction models for a gas phase, aiming to better accommodate the interaction between pentapeptides and target gas molecules. By adapting the weights of terms in the Gibbs free energy equation given in an empirical force field model, we demonstrate a significant increase in the absolute value of coefficient of determination (R02) , from an average of 0.05 with conventional liquid phase models to 0.90 with proposed gas phase models. An empirical modification technique for gas phase interactions markedly enhances the prediction accuracy of models, facilitating the effective development of peptide‐based gas sensors.
- Open Access
- 16 October 2024
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 25 (1) , 2408212
Sensing signal augmentation by flow rate modulation of carrier gas for accurate differentiation of complex odours
For olfactory sensors, clear differentiation of complex odour samples requires diverse information. To obtain such information, hardware modifications, such as introducing additional channels with different physical/chemical properties, are usually needed. In this study, we present a new approach to augmenting the sensing signals of an olfactory sensor by modulating the flow rate of the carrier gas. The headspace vapour of complex odours is measured using a sensing system of nanomechanical sensor (Membrane-type Surface stress Sensor, MSS). The resulting data set is quantitatively evaluated using the Davies-Bouldin index (DBI) of principal component analysis (PCA). The increasing number of sensing signals obtained at different gas flow rates leads to a decrease in the DBI, achieving better cluster separation between different odours. Such gas flow effects can be attributed to several factors, including the sample evaporation and the equilibrium of the gas-liquid and gas-solid interfaces. Proton-transfer-reaction time-of-flight mass spectrometry (PTR-TOF-MS) experiments reveal that the compositions of odour samples vary with the different gas flow rates. It is demonstrated that a simple technique for modulating gas flow rates can significantly improve the differentiation performance of complex odours, providing an additional degree of freedom in olfactory sensing.
- 16 October 2024
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 25 (1) , 2408212
Open AccessSensing signal augmentation by flow rate modulation of carrier gas for accurate differentiation of complex odours
For olfactory sensors, clear differentiation of complex odour samples requires diverse information. To obtain such information, hardware modifications, such as introducing additional channels with different physical/chemical properties, are usually needed. In this study, we present a new approach to augmenting the sensing signals of an olfactory sensor by modulating the flow rate of the carrier gas. The headspace vapour of complex odours is measured using a sensing system of nanomechanical sensor (Membrane-type Surface stress Sensor, MSS). The resulting data set is quantitatively evaluated using the Davies-Bouldin index (DBI) of principal component analysis (PCA). The increasing number of sensing signals obtained at different gas flow rates leads to a decrease in the DBI, achieving better cluster separation between different odours. Such gas flow effects can be attributed to several factors, including the sample evaporation and the equilibrium of the gas-liquid and gas-solid interfaces. Proton-transfer-reaction time-of-flight mass spectrometry (PTR-TOF-MS) experiments reveal that the compositions of odour samples vary with the different gas flow rates. It is demonstrated that a simple technique for modulating gas flow rates can significantly improve the differentiation performance of complex odours, providing an additional degree of freedom in olfactory sensing.
- Open Access
- 29 August 2024
- Published by Wiley in Advanced Science
- Vol. 11 (40) , e2405151
Syneresis‐Driven Self‐Refilling Printing of Geometry/Component‐Controlled Nano/Microstructures
Nano/microfabrication is of fundamental importance both in scientific and industrial situations. There are, therefore, many attempts at realizing easier, quicker, and more precise fabrication of various structures; however, achieving this aim without a bulky and costly setup is still challenging. Here, we introduce a facile and versatile means of printing an ordered structure consisting of nanoscale stripes and more complicated geometries including pillars and wavy form with a lateral resolution of single micrometers. To this end, we prepare a polydimethylsiloxane (PDMS) slab with an oxygen plasma‐induced wrinkled surface where liquid PDMS exudes by syneresis. Since this liquid PDMS is automatically loaded, the printing is repeatable without inking. A substrate moderately wettable to the liquid PDMS as well as amount/property‐controlled syneresis is primarily important for the creation of well‐defined structures. Precisely controlling these conditions will make this method universally applicable to diverse substrates and liquids including suspensions.
- 29 August 2024
- Published by Wiley in Advanced Science
- Vol. 11 (40) , e2405151
Open AccessSyneresis‐Driven Self‐Refilling Printing of Geometry/Component‐Controlled Nano/Microstructures
Nano/microfabrication is of fundamental importance both in scientific and industrial situations. There are, therefore, many attempts at realizing easier, quicker, and more precise fabrication of various structures; however, achieving this aim without a bulky and costly setup is still challenging. Here, we introduce a facile and versatile means of printing an ordered structure consisting of nanoscale stripes and more complicated geometries including pillars and wavy form with a lateral resolution of single micrometers. To this end, we prepare a polydimethylsiloxane (PDMS) slab with an oxygen plasma‐induced wrinkled surface where liquid PDMS exudes by syneresis. Since this liquid PDMS is automatically loaded, the printing is repeatable without inking. A substrate moderately wettable to the liquid PDMS as well as amount/property‐controlled syneresis is primarily important for the creation of well‐defined structures. Precisely controlling these conditions will make this method universally applicable to diverse substrates and liquids including suspensions.
- Open Access
- 16 April 2024
- Published by Royal Society of Chemistry (RSC) in Digital Discovery
- Vol. 3 (5) , 969-976
Automated odor-blending with one-pot Bayesian optimization
To enable robots to perform the creation of new odors by blending existing ones automatically, we developed an automated odor-blending system using membrane-type surface stress sensors and machine learning.
- 16 April 2024
- Published by Royal Society of Chemistry (RSC) in Digital Discovery
- Vol. 3 (5) , 969-976
Open AccessAutomated odor-blending with one-pot Bayesian optimization
To enable robots to perform the creation of new odors by blending existing ones automatically, we developed an automated odor-blending system using membrane-type surface stress sensors and machine learning.