Patricia Grinberg
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Patricia Grinberg has a total of 333 co-authors. Here are the top co-authors by number of shared publications:
- Ralph Edward Sturgeon
National Research Council Canada, Metrology Research Centre, Ottawa, ON, K1A 0R6, Canada
22 shared publications - Zoltan Mester
National Research Council Canada
12 shared publications - Scott N. Willie
Institute for National Measurement Standards, National Research Council Canada, Ottawa, Ontario, Canada
5 shared publications - Lu Yang
Metrology Research Centre, National Research Council Canada, Ottawa, Canada
4 shared publications Reinaldo C. Campos
4 shared publications- Christine Brophy
Metrology Research Centre, National Research Council Canada, Ottawa, Canada
3 shared publications
Latest Publications
- 22 September 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- p. 1-16
Preparation and certification of novel high-protein food certified reference materials
In response to the growing market for alternative high-protein foods, the National Research Council of Canada (NRC) has produced a series of five new certified reference materials (CRMs) including insect-based (black soldier fly larvae, cricket flour, and mealworm powder; BFLY-1, KRIK-1, and VORM-1) and plant-based proteins (canola meal and seaweed powder; CAME-1 and GSEA-1), in addition to the newest iteration of the fish protein CRM, DORM-5. Data for the mass fractions of up to 33 trace and essential elements were obtained for each material, along with speciation data for arsenic and selenium. Values for each analyte are presented on the materials’ Certificates of Analysis, on a dry mass basis, and include estimates of their expanded uncertainties corresponding to 95% confidence (k = 2). Herein, we describe the methods involved in the characterization campaigns for these materials, including the steps taken to overcome associated analytical challenges. We also describe a new approach to consensus value determination, via bias correction of measured results based on the quality control measurement of several similar-matrix CRMs, followed by the use of the Laplace random effects model for data combination. Graphical abstract
- 22 September 2026
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- p. 1-16
Preparation and certification of novel high-protein food certified reference materials
In response to the growing market for alternative high-protein foods, the National Research Council of Canada (NRC) has produced a series of five new certified reference materials (CRMs) including insect-based (black soldier fly larvae, cricket flour, and mealworm powder; BFLY-1, KRIK-1, and VORM-1) and plant-based proteins (canola meal and seaweed powder; CAME-1 and GSEA-1), in addition to the newest iteration of the fish protein CRM, DORM-5. Data for the mass fractions of up to 33 trace and essential elements were obtained for each material, along with speciation data for arsenic and selenium. Values for each analyte are presented on the materials’ Certificates of Analysis, on a dry mass basis, and include estimates of their expanded uncertainties corresponding to 95% confidence (k = 2). Herein, we describe the methods involved in the characterization campaigns for these materials, including the steps taken to overcome associated analytical challenges. We also describe a new approach to consensus value determination, via bias correction of measured results based on the quality control measurement of several similar-matrix CRMs, followed by the use of the Laplace random effects model for data combination. Graphical abstract
- Open Access
- 20 April 2026
- Published by Elsevier in SSRN Electronic Journal
Development of a Scalable Graphite Regeneration Process for Recycled Lithium-Ion Battery Anodes
Graphite remains the predominant material for negative electrodes in lithium-ion batteries (LIBs), maintaining a 98% market share due to its stable operating potential and high theoretical specific capacity. With the growing demand for LIBs in hybrid and electric vehicles, sustainable solutions such as recycling are critical for reducing raw material resource demand and environmental impact. This study focuses on developing a versatile graphite regeneration (pre-purification) process flow that can be applied to various graphite-rich feedstocks from spent LIBs, including direct recycling of end-of-life commercial EV anodes and recovery from black mass. The regeneration process integrates scalable and industrially applicable chemical, thermal, and mechanical treatments under mild conditions in order to purify graphite particles and assess their suitability for reuse as battery-grade material. The regeneration process effectively removes several contaminants including Al, Cu, Ti, Ni, Mn, and Co, yielding purified graphite with carbon content exceeding 97.5%. The refined graphite exhibits robust battery performance when tested in full cells against NMC 622 cathode, reclaiming 96% of the specific capacity of similar cells made with commercial natural graphite and demonstrating a capacity retention of 86.7% after 350 cycles at 1C. This study highlights the potential of the regeneration approach to produce premium-quality recycled graphite close to battery applications, although further optimization and scale-up are required to achieve full industrial viability.
- 20 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDevelopment of a Scalable Graphite Regeneration Process for Recycled Lithium-Ion Battery Anodes
Graphite remains the predominant material for negative electrodes in lithium-ion batteries (LIBs), maintaining a 98% market share due to its stable operating potential and high theoretical specific capacity. With the growing demand for LIBs in hybrid and electric vehicles, sustainable solutions such as recycling are critical for reducing raw material resource demand and environmental impact. This study focuses on developing a versatile graphite regeneration (pre-purification) process flow that can be applied to various graphite-rich feedstocks from spent LIBs, including direct recycling of end-of-life commercial EV anodes and recovery from black mass. The regeneration process integrates scalable and industrially applicable chemical, thermal, and mechanical treatments under mild conditions in order to purify graphite particles and assess their suitability for reuse as battery-grade material. The regeneration process effectively removes several contaminants including Al, Cu, Ti, Ni, Mn, and Co, yielding purified graphite with carbon content exceeding 97.5%. The refined graphite exhibits robust battery performance when tested in full cells against NMC 622 cathode, reclaiming 96% of the specific capacity of similar cells made with commercial natural graphite and demonstrating a capacity retention of 86.7% after 350 cycles at 1C. This study highlights the potential of the regeneration approach to produce premium-quality recycled graphite close to battery applications, although further optimization and scale-up are required to achieve full industrial viability.
- Open Access
- 31 January 2026
- Published by Springer Nature in Accreditation and Quality Assurance
Production and certification of ORMS-6, a certified reference material for mercury in water
Mercury is recognized by the World Health Organization as one of the “top ten chemicals of major public health concern.” To support global efforts in monitoring mercury contamination in drinking and environmental waters, analytical methods have continuously improved to achieve greater accuracy and lower detection limits. Critical tools in support of this endeavor are fit-for-purpose Certified Reference Materials (CRMs) with well-characterized mercury content present at trace or ultra-trace levels. The National Research Council of Canada (NRC) has produced and maintained such CRMs for several decades. This study presents the production and certification of the latest iteration, ORMS-6, mercury in water. This process involved rigorous cleaning protocols to mitigate background mercury contamination and real-time monitoring during ampouling to ensure that the material’s mercury content remained stable throughout the day-long process. The final consensus value for mercury content in ORMS-6 was determined by a combination of two independent methods: isotope dilution cold-vapor inductively coupled mass spectrometry and cold-vapor atomic fluorescence spectrometry.
- 31 January 2026
- Published by Springer Nature in Accreditation and Quality Assurance
Open AccessProduction and certification of ORMS-6, a certified reference material for mercury in water
Mercury is recognized by the World Health Organization as one of the “top ten chemicals of major public health concern.” To support global efforts in monitoring mercury contamination in drinking and environmental waters, analytical methods have continuously improved to achieve greater accuracy and lower detection limits. Critical tools in support of this endeavor are fit-for-purpose Certified Reference Materials (CRMs) with well-characterized mercury content present at trace or ultra-trace levels. The National Research Council of Canada (NRC) has produced and maintained such CRMs for several decades. This study presents the production and certification of the latest iteration, ORMS-6, mercury in water. This process involved rigorous cleaning protocols to mitigate background mercury contamination and real-time monitoring during ampouling to ensure that the material’s mercury content remained stable throughout the day-long process. The final consensus value for mercury content in ORMS-6 was determined by a combination of two independent methods: isotope dilution cold-vapor inductively coupled mass spectrometry and cold-vapor atomic fluorescence spectrometry.
- Open Access
- 30 September 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
Air-Stable Short-Wave Infrared Tin Telluride and Tin Telluride/Zinc Telluride Core–Shell Colloidal Quantum Dots
- 30 September 2025
- Published by American Chemical Society (ACS) in Chemistry of Materials
Open AccessAir-Stable Short-Wave Infrared Tin Telluride and Tin Telluride/Zinc Telluride Core–Shell Colloidal Quantum Dots
- Open Access
- 16 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 40 (7) , 1754-1766
Simultaneous determination of Cl, Br and I by aerosol-assisted PVG-ICP-MS
A method for the simultaneous determination of Cl, Br and I by aerosol-assisted PVG-ICP-MS using a UV spray chamber was developed.
- 16 May 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 40 (7) , 1754-1766
Open AccessSimultaneous determination of Cl, Br and I by aerosol-assisted PVG-ICP-MS
A method for the simultaneous determination of Cl, Br and I by aerosol-assisted PVG-ICP-MS using a UV spray chamber was developed.
- Open Access
- 31 March 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Resource Management
- Vol. 2 (4) , 632-641
Second-Life Evaluation of Li-Ion Battery Graphite after Separation and Pre- and Postpurification Treatments of Black Mass
- 31 March 2025
- Published by American Chemical Society (ACS) in ACS Sustainable Resource Management
- Vol. 2 (4) , 632-641
Open AccessSecond-Life Evaluation of Li-Ion Battery Graphite after Separation and Pre- and Postpurification Treatments of Black Mass
- 1 January 2025
- Published by IOP Publishing in Metrologia
- Vol. 62 (1A)
CCQM-K158 elements and inorganic arsenic in rice flour
Main text: KRISS and NMIJ jointly coordinated the CCQM-K158 comparison on elements and inorganic As in polished rice flour. The study comprised two parts, Part A and Part B. Successful participation in formal international comparisons is essential for documenting calibration and measurement capability claims (CMCs) by national metrology institutes (NMIs) and designated institutes (DIs). CCQM-K158 specifically supports CMCs within the food category, corresponding to the sample matrix labeled "High organic content" in the new CC table for broad claims. Simultaneously, the CCQM-P200 comparison ran in parallel with the key comparison CCQM-K158. In Part A, sixteen NMIs/DIs participated. Participants were requested to measure the mass fractions of Cu, Hg, K, Na, Pb, and Sb in rice flour, expressed in mg·kg-1, on a dry mass basis. Most NMIs/DIs adopted microwave-assisted acid digestion in a closed vessel for sample pretreatment, except for NIS, which used open vessel acid digestion with heating. Majority of the participants used isotope dilution (ID) ICP-MS, except for K and Na. ICP-MS or ICP-OES with standard addition calibration and k0 INAA were also applied specially for elements of which ID is impossible or difficult to access. ICP-MS, ICP-OES, AAS methods were also used with external calibration. In Part B, fifteen NMIs/DIs participated. Participants were requested to evaluate the mass fractions, expressed in mg·kg-1, of total arsenic and inorganic arsenic (the sum of As (III) and As (V)) in polished rice flour. For total As, thirteen NMIs/DIs reported their analytical results, where all the NMIs/DIs, except for JSI, adopted ICP-MS with a microwave acid digestion. JSI adopted k0-INAA after pelletizing the sample. For inorganic As, seven NMIs/DIs reported their analytical results, where all the NMIs/DIs adopted liquid chromatography-ICP-MS with a thermostatically controlled extraction using diluted acids. The results of all the participating NMIs/DIs were evaluated against the key comparison reference value (KCRV). The KCRV and associated uncertainty were estimated from reported results, excluding outliers, using NIST decision tree (NDT) as an estimator of the KCRVs. Successful participation in CCQM-K158 Part A demonstrates measurement capabilities for determining mass fractions of alkali and alkaline earth (K, Na), transition (Cu, Hg, Pb), and metalloid/semi-metal (Sb) elements in mass fraction range above 0.05 mg kg-1, in high organic content matrices such as grains, beans, and related samples. Similarly, successful participation in CCQM-K158 Part B demonstrates measurement capabilities to determine mass fractions of total arsenic and water-soluble arsenic species such as inorganic arsenic (the sum of As (III) and As (V)), mono-, di-, tri-, and tetra-methyl arsenic compounds (MAA, DMAA, TMAO, TeMA), arsenocholine (AsC), and arsenobetaine (AsB), in mass fraction range above 0.05 mg·kg-1 in grains, beans, and related samples. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
- 1 January 2025
- Published by IOP Publishing in Metrologia
- Vol. 62 (1A)
CCQM-K158 elements and inorganic arsenic in rice flour
Main text: KRISS and NMIJ jointly coordinated the CCQM-K158 comparison on elements and inorganic As in polished rice flour. The study comprised two parts, Part A and Part B. Successful participation in formal international comparisons is essential for documenting calibration and measurement capability claims (CMCs) by national metrology institutes (NMIs) and designated institutes (DIs). CCQM-K158 specifically supports CMCs within the food category, corresponding to the sample matrix labeled "High organic content" in the new CC table for broad claims. Simultaneously, the CCQM-P200 comparison ran in parallel with the key comparison CCQM-K158. In Part A, sixteen NMIs/DIs participated. Participants were requested to measure the mass fractions of Cu, Hg, K, Na, Pb, and Sb in rice flour, expressed in mg·kg-1, on a dry mass basis. Most NMIs/DIs adopted microwave-assisted acid digestion in a closed vessel for sample pretreatment, except for NIS, which used open vessel acid digestion with heating. Majority of the participants used isotope dilution (ID) ICP-MS, except for K and Na. ICP-MS or ICP-OES with standard addition calibration and k0 INAA were also applied specially for elements of which ID is impossible or difficult to access. ICP-MS, ICP-OES, AAS methods were also used with external calibration. In Part B, fifteen NMIs/DIs participated. Participants were requested to evaluate the mass fractions, expressed in mg·kg-1, of total arsenic and inorganic arsenic (the sum of As (III) and As (V)) in polished rice flour. For total As, thirteen NMIs/DIs reported their analytical results, where all the NMIs/DIs, except for JSI, adopted ICP-MS with a microwave acid digestion. JSI adopted k0-INAA after pelletizing the sample. For inorganic As, seven NMIs/DIs reported their analytical results, where all the NMIs/DIs adopted liquid chromatography-ICP-MS with a thermostatically controlled extraction using diluted acids. The results of all the participating NMIs/DIs were evaluated against the key comparison reference value (KCRV). The KCRV and associated uncertainty were estimated from reported results, excluding outliers, using NIST decision tree (NDT) as an estimator of the KCRVs. Successful participation in CCQM-K158 Part A demonstrates measurement capabilities for determining mass fractions of alkali and alkaline earth (K, Na), transition (Cu, Hg, Pb), and metalloid/semi-metal (Sb) elements in mass fraction range above 0.05 mg kg-1, in high organic content matrices such as grains, beans, and related samples. Similarly, successful participation in CCQM-K158 Part B demonstrates measurement capabilities to determine mass fractions of total arsenic and water-soluble arsenic species such as inorganic arsenic (the sum of As (III) and As (V)), mono-, di-, tri-, and tetra-methyl arsenic compounds (MAA, DMAA, TMAO, TeMA), arsenocholine (AsC), and arsenobetaine (AsB), in mass fraction range above 0.05 mg·kg-1 in grains, beans, and related samples. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
- 1 January 2024
- Published by IOP Publishing in Metrologia
- Vol. 61 (1A)
CCQM-K161 "Anions in Seawater"
Main text: Anions or nutrients in seawater are very important targets for oceanographic research and environmental monitoring of contaminations. Quantification of minor and trace anions in seawater has always been a challenge for the extremely high salinity, disparate levels of analyte and matrix ions, and even need to be measured at levels close to the detection limits of the method performance. Evidence of successful participation in formal, relevant international comparisons is needed to support calibration and measurement capability claims (CMCs) made by the national metrology institutes (NMIs) and designated institutes (DIs). The CCQM-K161 Anions in Seawater was organized by the Inorganic Analysis Working Group (IAWG) of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology (CCQM) to assess the abilities of the NMIs and DIs for the accurate determination of minor and trace anions in seawater. The measurands covered chloride (16 mg/g-25 mg/g), sulfate (1 mg/g-4 mg/g), bromide (30 mg/kg-100 mg/kg), nitrate (1 mg/kg-5 mg/kg) and phosphate (60 µg/kg-300 µg/kg). Twelve national metrology institutes and designated institutes participated in this key comparison. Participants were requested to evaluate the mass fractions, expressed in mg/g for chloride and sulfate, mg/kg for bromide and nitrate, and µg/kg for phosphate (as phosphorus) in a mixed natural seawater that was spiked with the phosphate. A variety of techniques including isotope dilution inductively coupled plasma mass spectrometry (IDMS), isotope dilution gas chromatography-mass spectrometry (ID-GC-MS), ion chromatography (IC), UV visible spectrophotometry (UV-Vis), flow injection analysis (FIA) was used by the participants for the determination. The NIST Decision Tree was used to assign the KCRV estimate and to calculate the degrees of equivalence of each participants following the IAWG Guidance on Using NIST Decision Tree for Comparison Reporting from 30 June 2023. Successful participation in CCQM-K161 demonstrates measurement capabilities for determination of anions in seawater. Considering the IAWG Core Capability Matrix, this material falls into the matrix challenge called 'High salts content', which corresponds to the CCQM amount-of-substance category sea water, and so will support CMCs for the anions in a mass fraction range from 60 µg/kg to 25 mg/g. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
- 1 January 2024
- Published by IOP Publishing in Metrologia
- Vol. 61 (1A)
CCQM-K161 "Anions in Seawater"
Main text: Anions or nutrients in seawater are very important targets for oceanographic research and environmental monitoring of contaminations. Quantification of minor and trace anions in seawater has always been a challenge for the extremely high salinity, disparate levels of analyte and matrix ions, and even need to be measured at levels close to the detection limits of the method performance. Evidence of successful participation in formal, relevant international comparisons is needed to support calibration and measurement capability claims (CMCs) made by the national metrology institutes (NMIs) and designated institutes (DIs). The CCQM-K161 Anions in Seawater was organized by the Inorganic Analysis Working Group (IAWG) of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology (CCQM) to assess the abilities of the NMIs and DIs for the accurate determination of minor and trace anions in seawater. The measurands covered chloride (16 mg/g-25 mg/g), sulfate (1 mg/g-4 mg/g), bromide (30 mg/kg-100 mg/kg), nitrate (1 mg/kg-5 mg/kg) and phosphate (60 µg/kg-300 µg/kg). Twelve national metrology institutes and designated institutes participated in this key comparison. Participants were requested to evaluate the mass fractions, expressed in mg/g for chloride and sulfate, mg/kg for bromide and nitrate, and µg/kg for phosphate (as phosphorus) in a mixed natural seawater that was spiked with the phosphate. A variety of techniques including isotope dilution inductively coupled plasma mass spectrometry (IDMS), isotope dilution gas chromatography-mass spectrometry (ID-GC-MS), ion chromatography (IC), UV visible spectrophotometry (UV-Vis), flow injection analysis (FIA) was used by the participants for the determination. The NIST Decision Tree was used to assign the KCRV estimate and to calculate the degrees of equivalence of each participants following the IAWG Guidance on Using NIST Decision Tree for Comparison Reporting from 30 June 2023. Successful participation in CCQM-K161 demonstrates measurement capabilities for determination of anions in seawater. Considering the IAWG Core Capability Matrix, this material falls into the matrix challenge called 'High salts content', which corresponds to the CCQM amount-of-substance category sea water, and so will support CMCs for the anions in a mass fraction range from 60 µg/kg to 25 mg/g. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
- 1 January 2024
- Published by IOP Publishing in Metrologia
- Vol. 61 (1A) , 08002
Final report for SIM.QM-S12: supplementary comparison for trace elements in natural water
Main text: The SIM Supplementary Comparison SIM.QM-S12 for Trace Elements in Natural Water was undertaken to assess and demonstrate the analytical capabilities of national metrology institutes (NMIs) and designated institutes (DIs) of SIM members (or other regions) for the accurate determination of trace elements in natural water at µg/kg levels. Evidence of successful participation in formal, relevant international comparisons is needed to document calibration and measurement capability claims (CMCs) made by NMIs and DIs. Seventeen NMIs and DIs participated. Participants were requested to evaluate the mass fractions, expressed in µg/kg, of arsenic, cadmium, lead and antimony in a natural mineral groundwater that was spiked with the respective elements. A variety of instrumental techniques including inductively coupled plasma mass spectrometry (ICP-MS), isotope dilution ICP-MS (ID-ICP-MS), inductively coupled plasma optical emission spectrometry (ICP-OES), electrothermal atomic absorption spectrometry (ETAAS) and hydride generation flame atomic absorption spectrometry (HG-FAAS) were used by the participants for the determination. The NIST decision tree was used to assign the SCRV estimate for the proposed measurands and to calculate the degrees of equivalence of each national measurement standard following the IAWG Guidance on Using NIST Decision Tree for Comparison Reporting from 30 June 2023. Successful participation in SIM.QM-S12 demonstrates measurement for determination of elements in water matrices. Considering the IAWG Core Capability Matrix, this material falls into the matrix challenge called "Water/aqueous", which corresponds to the CCQM amount-of-substance category fresh water, and so will support CMCs for the metalloids and semi-metals at mass fraction levels below 50 µg/kg (As and Sb measurements) and transition elements at mass fraction levels below 50 µg/kg (except Hg) (for Cd and Pb measurements). To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
- 1 January 2024
- Published by IOP Publishing in Metrologia
- Vol. 61 (1A) , 08002
Final report for SIM.QM-S12: supplementary comparison for trace elements in natural water
Main text: The SIM Supplementary Comparison SIM.QM-S12 for Trace Elements in Natural Water was undertaken to assess and demonstrate the analytical capabilities of national metrology institutes (NMIs) and designated institutes (DIs) of SIM members (or other regions) for the accurate determination of trace elements in natural water at µg/kg levels. Evidence of successful participation in formal, relevant international comparisons is needed to document calibration and measurement capability claims (CMCs) made by NMIs and DIs. Seventeen NMIs and DIs participated. Participants were requested to evaluate the mass fractions, expressed in µg/kg, of arsenic, cadmium, lead and antimony in a natural mineral groundwater that was spiked with the respective elements. A variety of instrumental techniques including inductively coupled plasma mass spectrometry (ICP-MS), isotope dilution ICP-MS (ID-ICP-MS), inductively coupled plasma optical emission spectrometry (ICP-OES), electrothermal atomic absorption spectrometry (ETAAS) and hydride generation flame atomic absorption spectrometry (HG-FAAS) were used by the participants for the determination. The NIST decision tree was used to assign the SCRV estimate for the proposed measurands and to calculate the degrees of equivalence of each national measurement standard following the IAWG Guidance on Using NIST Decision Tree for Comparison Reporting from 30 June 2023. Successful participation in SIM.QM-S12 demonstrates measurement for determination of elements in water matrices. Considering the IAWG Core Capability Matrix, this material falls into the matrix challenge called "Water/aqueous", which corresponds to the CCQM amount-of-substance category fresh water, and so will support CMCs for the metalloids and semi-metals at mass fraction levels below 50 µg/kg (As and Sb measurements) and transition elements at mass fraction levels below 50 µg/kg (except Hg) (for Cd and Pb measurements). To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database https://www.bipm.org/kcdb/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
- Open Access
- 4 May 2023
- Published by CSIRO Publishing in Environmental Chemistry
- Vol. 20 (2) , 5-17
Determination of inorganic As, DMA and MMA in marine and terrestrial tissue samples: a consensus extraction approach
Environmental context: Arsenic can be found in all environmental compartments in a large number of chemical forms of varying toxicity. We performed an inter-laboratory comparison study focusing on quantitation of some of the most toxic arsenic forms in seven different biological materials and found very good agreement among the submitted results. Certification of the studied materials will provide suitable quality control samples for environmentally relevant concentrations of arsenic in food products and biota. Rationale: Arsenic (As) speciation analysis in biological matrices has been performed for several decades; however, there are very few matrix certified reference materials available for the validation of analytical methods. The literature data on the mass fractions of As species in the existing certified reference materials are inconsistent and suggest method extraction dependency. Methodology: In the present study, an international round-robin study was organised to identify the possible sources of discrepancies in quantitation of several As species in different matrices of biological reference materials: one plant tissue, three marine and three terrestrial biological tissues. Each participating laboratory was provided with a set of identical calibration standard solutions, and analysed the samples by following a common group extraction method as well as using an in-house protocol. Results: The results showed that significant biases can be introduced by insufficient verification of the analyte’s mass fractions in the calibration standard solutions. The choice of extraction method seems to have very little impact on the quantitation of As species in the studied plant and terrestrial biological tissues. However, following a prescribed extraction method led to significant reduction of uncertainties in more complex samples such as marine animal tissues. Discussion: Some differences in the mass fractions of As species extracted from marine animal tissues in water (with and without H2O2) were observed and should be further investigated. Despite the variety of extraction methods used, very good agreement between reported mass fractions was achieved and the combined consensus values will be published as certified reference values of As species in the studied materials.
- 4 May 2023
- Published by CSIRO Publishing in Environmental Chemistry
- Vol. 20 (2) , 5-17
Open AccessDetermination of inorganic As, DMA and MMA in marine and terrestrial tissue samples: a consensus extraction approach
Environmental context: Arsenic can be found in all environmental compartments in a large number of chemical forms of varying toxicity. We performed an inter-laboratory comparison study focusing on quantitation of some of the most toxic arsenic forms in seven different biological materials and found very good agreement among the submitted results. Certification of the studied materials will provide suitable quality control samples for environmentally relevant concentrations of arsenic in food products and biota. Rationale: Arsenic (As) speciation analysis in biological matrices has been performed for several decades; however, there are very few matrix certified reference materials available for the validation of analytical methods. The literature data on the mass fractions of As species in the existing certified reference materials are inconsistent and suggest method extraction dependency. Methodology: In the present study, an international round-robin study was organised to identify the possible sources of discrepancies in quantitation of several As species in different matrices of biological reference materials: one plant tissue, three marine and three terrestrial biological tissues. Each participating laboratory was provided with a set of identical calibration standard solutions, and analysed the samples by following a common group extraction method as well as using an in-house protocol. Results: The results showed that significant biases can be introduced by insufficient verification of the analyte’s mass fractions in the calibration standard solutions. The choice of extraction method seems to have very little impact on the quantitation of As species in the studied plant and terrestrial biological tissues. However, following a prescribed extraction method led to significant reduction of uncertainties in more complex samples such as marine animal tissues. Discussion: Some differences in the mass fractions of As species extracted from marine animal tissues in water (with and without H2O2) were observed and should be further investigated. Despite the variety of extraction methods used, very good agreement between reported mass fractions was achieved and the combined consensus values will be published as certified reference values of As species in the studied materials.