Kai Guo

A new family of biodegradable amino acid‐based poly(ether ester amide)s (AA‐PEEAs) consisting of three building blocks [poly(ε‐caprolactone) (PCL), L‐phenylalanine (Phe), and aliphatic acid dichloride] were synthesized by a solution polycondensation. Using DMA as the solvent, these PCL‐containing Phe‐PEEA polymers were obtained with fair to very good yields with weight average molecular weight (M_w) ranging from 6.9 kg/mol to 31.0 kg/mol, depending on the original molecular weight of PCL. The chemical structures of the PCL‐containing Phe‐PEEA polymers were confirmed by IR and NMR spectra. These PCL‐containing Phe‐PEEAs had lower T_g than most of the oligoethylene glycol (OEG) based AA‐PEEAs due to the more molecular flexibility of the PCL block in the backbones, but had higher T_g than non‐amino acid based PEEA. The solubility of the PCL‐containing Phe‐PEEA polymers in a wide range of common organic solvents, such as THF and chloroform, was significantly improved when comparing with aliphatic diol based poly(ester amide)s and OEG based AA‐PEEAs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

A new family of biodegradable amino‐acid‐based poly(ester amide)s (AA–PEAs) and amino‐acid‐based poly(ether ester amide)s (AA–PEEAs) consisting of reactive pendant functional groups (COOH or NH₂) were synthesized from unsaturated AA–PEAs and AA–PEEAs via a thiol–ene reaction in the presence of a radical initiator (2,2′‐azobisisobutyronitrile). The synthetic method was a one‐step reaction with near 100% yields under mild reaction conditions. The resulting functional AA–PEA and AA–PEEA polymers were characterized by Fourier transform infrared spectroscopy, NMR, and differential scanning calorimetry. These new functional AA–PEA and AA–PEEA derivatives had lower glass‐transition temperatures than the original unsaturated AA–PEA and AA–PEEA polymers, and their solubility in some organic solvents also improved. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010

Novel biodegradable submicron microspheres of amino acid based poly(ester amide)s (PEAs) were fabricated by an oil‐in‐water (O/W) emulsion/solvent evaporation technique and their morphology and drug loading efficiency were examined. PEAs microspheres of mean diameter <1 μm with very narrow size distribution were obtained at a fair yield about 80%. The effects of PEA polymer concentration, polyvinyl alcohol emulsifier concentration, and the homogenizer speed on the size and morphology of final PEA microspheres were examined by analyzing their SEM images. It is found that a low PEA concentration, a high PVA concentration, and a high homogenizer speed are the optimal conditions for obtaining smaller microspheres. The biodegradation behaviors of these PEA microspheres at 37°C were investigated as a function of enzyme (α‐chymotrypsin) concentration and incubation time. The data showed similar surface erosion degradation mechanism as PEA polymers reported previously. Paclitaxel loaded PEA microspheres with high encapsulation efficiency were obtained without significantly affecting their size and surface morphology. The high drug loading efficiency close to 100% suggested that PEA microspheres may have the potential for the injection administration of highly hydrophobic anticancer drugs. © 2008 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009

A series of biodegradable random unsaturated/saturated poly(ether ester amide)s copolymers (USPEEAs) were synthesized by an active solution polycondensation of unsaturated and saturated dicarboxylic acid‐based diester monomers with diamine salts of phenylalanine and saturated oligo(ethylene glycol) (OEG). These USPEEA copolymers were obtained with fairly good yields in DMA solvent. The chemical structures of the USPEEA copolymers were confirmed by both IR and NMR spectra. The molecular weights (M_n and M_w) of USPEEAs measured by GPC ranged from 3 to 27 kg/mol with the molecular weight distribution (MWD) ranging from 1.52 to 2.13. USPEEA copolymers obtained had T_g lower than that of the pure UPEEAs but higher than that of pure saturated poly(ether ester amide)s (SPEEA). An increase in the unsaturated component in USPEEAs led to an increase in their T_g. A preliminary in vitro biodegradation property of USPEEA copolymers were investigated in both pure PBS buffer and α‐chymotrypsin solutions. The USPEEA copolymers showed a pronounced weight loss in enzyme solutions, but a smaller weight loss in a pure PBS. The biodegradation rates of USPEEA copolymers in α‐chymotrypsin solution were much slower than those of pure PEEAs. Therefore, upon adjusting monomers feed ratio, USPEEA copolymers could have controlled chemical, physical, and biodegradation properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008

A new family of novel biodegradable poly(ether ester amide)s (PEEAs) consisting of three building blocks (l-phenylalanine, oligoethylene glycol, and aliphatic acid dichloride) were synthesized by solution polycondensation. Using N,N-dimethylacetamide as the solvent, these PEEA polymers were obtained with fairly good yields with reduced viscosity (η_red) ranging from 0.13 to 0.61 dL/g. The chemical structures of the PEEAs were confirmed by IR, NMR spectra, and elemental analysis. The PEEAs had T_g values lower than that of the saturated poly(ester amide)s (PEAs) of similar structures due to the incorporation of ether bonds in the backbones. An increase in the number of ether bonds in PEEA resulted in a lower T_g value. The solubility of the PEEA polymers in a wide range of common organic solvents was significantly improved when compared with unsaturated PEAs. The preliminary in vitro biodegradation behaviors of PEEA polymers were investigated in both pure PBS buffer and α-chymotrypsin solution of different concentrations. The polymers showed a significantly faster weight loss in an enzyme solution (α-chymotrypsin) but a very slow biodegradation rate in pure PBS buffer. The enzymatic hydrolysis rates of PEEAs (in terms of weight loss) were found to be much faster than those of saturated and unsaturated polyesteramides reported in previous studies. The zero-order-like biodegradation kinetics and molecular weight data also suggested surface erosion biodegradation mechanisms for these PEEAs.

A new family of biodegradable copolymers of unsaturated poly(ester amide)s (UPEAs) and saturated poly(ester amide)s (SPEAs) based on L‐phenylalanine, aliphatic dicarboxylic acids, and aliphatic dialcohols was synthesized by solution polycondensation and characterized. These unsaturated/saturated poly(ester amide) copolymers (USPEAs) were obtained in fairly good yields with N,N‐dimethylacetamide as the solvent. The molecular weights (M_n and M_w) of the USPEAs measured by GPC ranged from 15 to 60 kg/mol with a molecular weight distribution of 1.07–1.63. The chemical structures of the USPEAs were confirmed by both IR and NMR spectra. The USPEA copolymers had glass transition temperatures lower than that of pure UPEA but higher than that of pure SPEA. An increase in the unsaturated component in the USPEA copolymers led to an increase in their glass transition temperatures. The solubility of the copolymers was good in N,N‐dimethylacetamide and dimethyl sulfoxide but poor in water, acetone, methanol, and ethyl acetate. The preliminary in vitro biodegradation properties of the USPEA copolymers were investigated in both pure phosphate buffered saline (PBS) buffer and α‐chymotrypsin solutions. The copolymers showed significantly faster weight loss in an enzyme solution than in a pure PBS buffer. Upon the adjustment of the unsaturated‐to‐saturated diester monomer feed ratio, the obtained USPEA copolymers could have controlled chemical and physical properties, such as glass transition temperatures, solubility, and biodegradability, which could easily extend their applications to biomedical and pharmaceutical areas. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1595–1606, 2007

Biodegradable hydrogels (FPBe-G) were synthesized by the photopolymerization of two precursors: FPBe, a fumurate-based unsaturated poly(ester amide) (UPEA), and poly(ethylene glycol) diacrylate (PE...

A series of novel biodegradable hydrogels were designed and synthesized from four types of unsaturated poly(ester amide) (UPEA) and poly(ethylene glycol) diacrylate (PEG‐DA) precursors by UV photocrosslinking. These newly synthesized biodegradable UPEA/PEG‐DA hydrogels were characterized by their gel fraction (G_f), equilibrium swelling ratio (Q_eq), compressive modulus, and interior morphology. The effect of the precursor feed ratio (UPEAs to PEG‐DA) on the properties of the hydrogels was also studied. The incorporation of UPEA polymers into the PEG‐DA hydrogels increased their hydrophobicity, crosslinking density (denser network), and mechanical strength (higher compressive modulus) but reduced Q_eq. When different types of UPEA precursors were coupled with PEG‐DA at the same feed ratio (20 wt %), the resulting hydrogels had similar Q_eq values and porous three‐dimensional interior morphologies but different G_f and compressive modulus values. These differences in the hydrogel properties were correlated to the chemical structures of the UPEA precursors; that is, the different locations of the >CC< double bonds in individual UPEA segments resulted in their different reactivities toward PEG‐DA to form hydrogels. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3932–3944, 2005

A series of novel biodegradable unsaturated poly(ester amide)s (UPEAs) were synthesized through the solution polycondensation of two unsaturated monomers, di‐p‐nitrophenyl fumarate and L‐phenylalanine 2‐butene‐1,4‐diol diester p‐toluene sulfonate, and four other saturated monomers in different combinations. The UPEAs were obtained in fairly good yields with N,N‐dimethylacetamide (DMA) as the solvent. The number‐average and weight‐average molecular weights of the UPEAs, measured by gel permeation chromatography, ranged from 10 to 30 kg/mol, they had a rather narrow molecular weight distribution of 1.40. The chemical structures of the novel biodegradable UPEAs were confirmed by both IR and NMR spectra. The UPEAs had higher glass‐transition temperatures than saturated PEAs of similar structures, and their glass‐transition temperatures were affected more by the CC double bond located in the diamide part than by those in the diester part. The solubility of the polymers was poor in water but better in DMA and dimethyl sulfoxide. With the availability of these inherent CC double bonds in the UPEA backbones, these UPEAs have the functionality of CC bonds, such as photochemical reactivity or the ability to react with or be modified by other bioactive or other environmentally sensitive compounds, and this can easily extend their applications to biomedical and pharmaceutical areas. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1463–1477, 2005