LKLevent Kirkayak

Levent Kirkayak

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Levent Kirkayak has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Thermo-Elastic Homogenization of TPMS-Based Interpenetrating Phase Composites: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches

    by Yao Koutsawa, Sara Mouman, Lucas Binsfeld, Levent Kirkayak, Jieun Yang, Joamin Gonzalez-Gutierrez, Gaetano Giunta

    Triply periodic minimal surface (TPMS)-based interpenetrating phase composites (IPCs) combine two co-continuous solid phases across a smooth, doubly curved interface, providing a multifunctional design space for tailoring mechanical and thermal properties. This study investigates the effective thermo-elastic and thermal-transport behavior of TPMS-based IPCs using two established homogenization approaches: finite element (FE)-based representative unit cell (RUC) homogenization and mechanics of structure genome (MSG)-based homogenization. Four TPMS topologies—gyroid, diamond (Schwarz D), PMY, and F-rhombic dodecahedron (F-RD)—are considered over TPMS-phase volume fractions ranging from 0.1 to 0.5. Conforming-mesh RUC models are generated using Microgen and analyzed in Abaqus for FE simulations with periodic boundary conditions, and in the in-house CmbsFE code for MSG-based homogenization. The two approaches are cross-verified for predicting effective elastic properties, coefficients of thermal expansion (CTEs), and thermal conductivities, and agree to within 0.3% on identical meshes. On identical meshes the two approaches solve linear systems of the same size, and MSG requires fewer matrix decompositions. The study further examines the influence of TPMS topology and TPMS-phase volume fraction on the multifunctional response of two-phase IPCs, supporting the design and optimization of structural–thermal materials.

  • Open Access

    Thermo-Elastic Homogenization of TPMS-Based Interpenetrating Phase Composites: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches

    by Yao Koutsawa, Sara Mouman, Lucas Binsfeld, Levent Kirkayak, Jieun Yang, Joamin Gonzalez-Gutierrez, Gaetano Giunta

    Triply Periodic Minimal Surface (TPMS)-based Interpenetrating Phase Composites (IPCs) combine two co-continuous solid phases across a smooth, doubly curved interface, providing a multifunctional design space for tailoring mechanical and thermal properties. This study investigates the effective thermo-elastic and thermal-transport behavior of TPMS-based IPCs using two homogenization approaches: Finite Element (FE)-based Representative Unit Cell (RUC) homogenization and Mechanics of Structure Genome (MSG)-based homogenization. Four TPMS topologies – gyroid, diamond (Schwarz D), PMY, and F-Rhombic Dodecahedron (F-RD) – are considered over relative densities ranging from 0.1 to 0.5. Conforming-mesh RUC models are generated using Microgen and analyzed in Abaqus for FE simulations with periodic boundary conditions, and in the in-house CmbsFE code for MSG-based homogenization. The two approaches are assessed for predicting effective elastic properties, coefficients of thermal expansion (CTEs), and thermal conductivities. The study further examines the influence of TPMS topology and relative density on the multifunctional response of two-phase IPCs, supporting the design and optimization of lightweight structural–thermal materials.

  • Open Access

    Mechanical Homogenisation of TPMS Architectures: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches

    by Sara Mouman, Yao Koutsawa, Lucas Binsfeld, Levent Kirkayak, Jieun Yang, Gaetano Giunta

    This work presents a comparative study on the mechanical homogenisation of Triply Periodic Minimal Surface (TPMS) lattice structures in the linear elastic regime, which have attracted significant interest for their unique ability to combine lightweight design with tailored properties. The study investigates the effective mechanical behaviour of Representative Unit Cells (RUCs) generated using the open-source Python tool Microgen. Two homogenisation strategies are considered: (i) Finite Element (FE)-based homogenisation carried out in Abaqus, and (ii) the Mechanics of Structure Genome (MSG), a unified theory for multi-scale constitutive modelling, implemented in an in-house software tool. The comparison encompasses multiple TPMS topologies, including well-studied cases used for validation, namely gyroid and diamond, as well as less-explored ones, such as PMY and F-Rhombic Dodecahedron, to provide new insights. RUCs are analysed across relative densities ranging from 10 to 50%. Equivalent linear elastic properties (Young’s moduli, shear moduli, and Poisson’s ratios) are derived and compared to assess the consistency, accuracy, and computational efficiency of the two approaches. The results show that both methods yield effective properties with less than 1% difference between them, and less than 5% deviation from experimental data reported in the literature for the effective Young’s modulus. Furthermore, the anisotropy of each TPMS topology across the range of relative densities is examined through the directional distribution of Young’s moduli. The outcomes are expected to clarify the strengths and limitations of FE versus MSG in capturing the effective behaviour of architected cellular solids, thus supporting the selection of homogenisation strategies for the design of lattice-based lightweight structures.


  • Open Access

    Mechanical Homogenisation of TPMS Architectures: A Comparison Between Finite Element and Mechanics of Structure Genome Approaches

    by Sara Mouman, Yao Koutsawa, Lucas Binsfeld, Levent Kirkayak, Jieun Yang, Gaetano Giunta

    This work presents a comparative study on the mechanical homogenisation of Triply Periodic Minimal Surface (TPMS) lattice structures, which have attracted significant interest for their unique ability to combine lightweight design with tailored properties. The study investigates the effective mechanical behaviour of Representative Unit Cells (RUCs) generated using the open-source Python tool Microgen. Two homogenisation strategies are considered: (i) Finite Element (FE)-based homogenisation carried out in Abaqus, and (ii) the Mechanics of Structure Genome (MSG), a unified theory for multi-scale constitutive modelling, implemented in an in-house software tool. The comparison encompasses multiple TPMS topologies, including well-studied cases used for validation, namely gyroid and diamond, as well as less-explored ones, such as PMY, and F-Rhombic Dodecahedron, to provide new insights. RUCs are analysed across relative densities ranging from 10 to 50%. Equivalent linear elastic properties (Young’s moduli, shear moduli, and Poisson’s ratios) are derived and compared to assess the consistency, accuracy, and computational efficiency of the two approaches. Furthermore, the anisotropy of each TPMS topology across the range of relative densities is examined through the directional distribution of Young’s moduli. The outcomes are expected to clarify the strengths and limitations of FE versus MSG in capturing the effective behaviour of architected cellular solids, thus supporting the selection of homogenisation strategies for the design of lattice-based lightweight structures.


  • Open Access

    Hierarchical Free Vibration Analysis of Variable-Angle Tow Shells Using Unified Formulation

    by Domenico Andrea Iannotta, Gaetano Giunta, Levent Kirkayak, Marco Montemurro

    This paper investigates the dynamic behavior of shell structures presenting variable-angle tow laminations. The choice of placing fibers along curvilinear patterns allows for a broader structural design space, which is advantageous in several engineering contexts, provided that more complex numerical analyses are managed. In this regard, Carrera’s unified formulation has been widely used for studying variable-angle tow plates and shells. This article aims to expand this formulation through the derivation of the complete formulation for a generic shell reference surface. The principle of virtual displacements is used as a variational statement for obtaining, in a weak sense, the stiffness and mass matrices within the finite element solution method. The free vibration problem of singly and doubly curved variable-angle tow shells is then addressed. The proposed approach is compared to Abaqus three-dimensional reference solutions and classical theories to investigate the effectiveness of the developed models in predicting the vibrational frequencies and modes. The results demonstrate a good agreement between the proposed approach and reference solutions.


  • Open Access

    Buckling Analysis of Variable-Angle Tow Composite Plates through Variable Kinematics Hierarchical Models

    by Gaetano Giunta, Domenico Andrea Iannotta, Levent Kirkayak, Marco Montemurro

    Variable-Angle Tow (VAT) laminates can improve straight fiber composites’ mechanical properties thanks to the application of curvilinear fibers. This characteristic allows one to achieve ambitious objectives for design and performance purposes. Nevertheless, the wider design space and the higher number of parameters result in a more complex structural problem. Among the various approaches that have been used for VAT study, Carrera’s Unified Formulation (CUF) allows one to obtain multiple theories within the same framework, guaranteeing a good compromise between the results’ accuracy and the computational cost. In this article, the linear buckling behavior of VAT laminates is analyzed through the extension of CUF 2D plate models within Reissner’s Mixed Variational Theorem (RMVT). The results show that RMVT can better approximate the prebuckling nonuniform stress field of the plate when compared to standard approaches, thus improving the prediction of the linear buckling loads of VAT composites.


  • Open Access

    Buckling Analysis of Variable-Angle Tow composite Plates Through Variable Kinematics Hierarchical Models

    by Gaetano Giunta, Domenico Andrea Iannotta, Levent Kirkayak, Marco Montemurro

    Variable-Angle Tow (VAT) laminates can improve straight fiber composites mechanical properties thanks to the application of curvilinear fibers. This characteristic allows to achieve ambitious objectives for design and performance purposes. Nevertheless, the wider design space and the higher number of parameters result in a more complex structural problem. Among the various approaches that have been used for VATs study, Carrera’s Unified Formulation (CUF) allows to obtain multiple theories within the same framework, guaranteeing a good compromise between the results accuracy and the computational cost. In this article, the linear buckling behavior of VAT laminates is analyzed through the extension of CUF 2D plate models within the Reissner’s Mixed Variational Theorem (RMVT). Results show that RMVT can better approximate the prebuckling non-uniform stress field of the plate when compared to standard approaches, thus improving the prediction of the linear buckling loads of VAT composites.

  • Stress Effect of Screw Insertion Angle for Base Plate Fixation on Humeral Spacer in Reverse Shoulder Arthroplasty

    by H. Çağdaş Basat, Levent Kirkayak

    There have been numerous methods used for improving glenoid base plate stability in reverse shoulder arthroplasty. In this regard, screw insertion angle is the most significant parameter. Our claim is that screw insertion angle provokes changes in contact stress distribution on humeral spacer. We analyzed effect of 20 different models on humeral spacer with finite element analysis. This was comprised of 5 different screw angles, 4 different abduction positions of shoulder and five intact muscles (deltoid, teres major, infraspinatus, teres minor, subscapularis). The screw insertion angle affected stress distribution of humeral spacer and became more significant as the shoulder abduction reached 90 degrees where the maximum moment to the shoulder arm was applied. In addition, it is shown that screw insertion angle is not only an important parameter for the stress distribution but also the magnitude of the contact stress on humeral spacer due to the changes of direction of the transmitted load during the abduction. Contact stresses on quadrants of the humeral spacer could be influenced by changing screw insertion angle and shoulder abduction angle. Also, a screw insertion angle placement at 17 degrees provided the optimal stress distribution on the humeral spacer at all abduction positions of shoulder.