Domenico Andrea Iannotta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Domenico Andrea Iannotta has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Gaetano Giunta
Luxembourg Institute of Science and Technology, 5 Avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg
10 shared publications - Marco Montemurro
Arts et Metiers Institute of Technology, CNRS, Bordeaux INP, I2M, UMR 5295
9 shared publications - Levent Kirkayak
Luxembourg Institute of Science and Technology, 5 Avenue des Hauts-Fourneaux, L-4362 Esch-sur-Alzette, Luxembourg
3 shared publications G. Giunta
2 shared publicationsM. Montemurro
2 shared publications- Laurent Gallimard
Université Paris Ouest Nanterre-La Défense
1 shared publication
Latest Publications
- 16 July 2026
- Published by Elsevier in Computers & Structures
- Vol. 330
A hierarchical variable-curvature shell formulation for the static analysis of variable angle tow composite structures
- 16 July 2026
- Published by Elsevier in Computers & Structures
- Vol. 330
A hierarchical variable-curvature shell formulation for the static analysis of variable angle tow composite structures
- Open Access
- 15 July 2026
- Published by Elsevier in SSRN Electronic Journal
A Hierarchical Global-Local Approach for the Static Analysis of Variable-Angle Tow Composite Plates
Variable-Angle Tow (VAT) composites offer enhanced mechanical performance and an expanded design space compared to classical laminates, at the expense of increased computational complexity and additional modeling challenges. To address these issues, this paper applies the Carrera Unified Formulation (CUF) within the Finite Element Method (FEM) in a Global-Local (G-L) framework for the linear static analysis of VAT composite plates. The global model is constructed using standard shell elements, while the local model employs CUF-based higher-order plate elements. The governing equations of the local problem are derived in a layer-wise context by adopting both the Principle of Virtual Displacements (PVD) and the Reissner's Mixed Variational Theorem (RMVT). Numerical investigations include pure bending and free-edge problems to demonstrate the capability of the proposed approach to accurately predict displacements and stresses in critical regions of the global domain. The free-edge results further demonstrate that curvilinear fibre orientation tailoring can substantially mitigate interlaminar stress concentrations at the laminate boundary, with reductions in transverse shear stress peaks exceeding 90% compared to unfavorable fibre configurations. Comparisons with high-fidelity three-dimensional models show that both PVD- and RMVT-based CUF local models accurately capture displacements and in-plane stresses, while RMVT formulations provide superior accuracy in satisfying through-thickness transverse stress continuity due to inter-layer equilibrium enforcement.
- 15 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Hierarchical Global-Local Approach for the Static Analysis of Variable-Angle Tow Composite Plates
Variable-Angle Tow (VAT) composites offer enhanced mechanical performance and an expanded design space compared to classical laminates, at the expense of increased computational complexity and additional modeling challenges. To address these issues, this paper applies the Carrera Unified Formulation (CUF) within the Finite Element Method (FEM) in a Global-Local (G-L) framework for the linear static analysis of VAT composite plates. The global model is constructed using standard shell elements, while the local model employs CUF-based higher-order plate elements. The governing equations of the local problem are derived in a layer-wise context by adopting both the Principle of Virtual Displacements (PVD) and the Reissner's Mixed Variational Theorem (RMVT). Numerical investigations include pure bending and free-edge problems to demonstrate the capability of the proposed approach to accurately predict displacements and stresses in critical regions of the global domain. The free-edge results further demonstrate that curvilinear fibre orientation tailoring can substantially mitigate interlaminar stress concentrations at the laminate boundary, with reductions in transverse shear stress peaks exceeding 90% compared to unfavorable fibre configurations. Comparisons with high-fidelity three-dimensional models show that both PVD- and RMVT-based CUF local models accurately capture displacements and in-plane stresses, while RMVT formulations provide superior accuracy in satisfying through-thickness transverse stress continuity due to inter-layer equilibrium enforcement.
- Open Access
- 2 March 2026
- Published by Elsevier in SSRN Electronic Journal
A Hierarchical Variable-Curvature Shell Formulation for the Static Analysis of Variable Angle Tow Composite Structures
In this study, the Carrera's unified formulation is extended to the static analysis of variable angle tow composite shells with non-constant curvature radii. To this end, appropriate two-dimensional finite elements are developed within the unified framework, enabling the accurate prediction of quasi three-dimensional displacement and stress fields at a reduced computational cost. Both the principle of virtual displacements and Reissner's mixed variational theorem are employed to derive the problem weak form within the finite element method framework. For the sake of validation, high-fidelity reference solutions are obtained using a global-local modeling strategy in Abaqus. Comparisons between the proposed models and the 3D finite element reference solutions show excellent agreement. The mixed variational formulation, in particular, accurately predicts transverse stresses, confirming both the effectiveness and the efficiency of the proposed methodology.
- 2 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessA Hierarchical Variable-Curvature Shell Formulation for the Static Analysis of Variable Angle Tow Composite Structures
In this study, the Carrera's unified formulation is extended to the static analysis of variable angle tow composite shells with non-constant curvature radii. To this end, appropriate two-dimensional finite elements are developed within the unified framework, enabling the accurate prediction of quasi three-dimensional displacement and stress fields at a reduced computational cost. Both the principle of virtual displacements and Reissner's mixed variational theorem are employed to derive the problem weak form within the finite element method framework. For the sake of validation, high-fidelity reference solutions are obtained using a global-local modeling strategy in Abaqus. Comparisons between the proposed models and the 3D finite element reference solutions show excellent agreement. The mixed variational formulation, in particular, accurately predicts transverse stresses, confirming both the effectiveness and the efficiency of the proposed methodology.
- 12 February 2026
- Published by Elsevier in Finite Elements in Analysis and Design
- Vol. 256
A mixed method for investigating free vibrations in fiber-reinforced shells with non-uniform curvature
- 12 February 2026
- Published by Elsevier in Finite Elements in Analysis and Design
- Vol. 256
A mixed method for investigating free vibrations in fiber-reinforced shells with non-uniform curvature
- Open Access
- 4 December 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (12) , 672
A Unified Framework for Free Vibration Analysis of Variable-Angle Tow Composite Shells with Spatially Varying Curvature
The combination of variable-angle tow composites with shell geometries presents significant potential in various engineering and technical applications, particularly with regard to structural performance. Nevertheless, the numerical modeling of these structures can be challenging, as the larger number of unknowns significantly increases computational effort. The Carrera’s unified formulation has demonstrated promising results in the analysis of plates and shells reinforced with curvilinear fibers, offering an effective balance between numerical accuracy and the number of variables. This paper extends the unified formulation to more complex variable-angle tow shell structures characterized by variable curvature radii within their physical domain. The governing equations of the dynamic problem are derived using a displacement-based variational method, and the results are validated through comparisons with reference solutions from Abaqus 3D models. The First-Order Shear Deformation Theory (FSDT) is presented for a broader comparison of the proposed models. The maximum percentage error in terms of frequency shift observed for the FSDT model is , whereas the corresponding error for the most refined model is only . Across all examined cases, the computed fundamental frequencies and mode shapes closely match the reference results, demonstrating the reliability and effectiveness of the proposed method.- 4 December 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (12) , 672
Open AccessA Unified Framework for Free Vibration Analysis of Variable-Angle Tow Composite Shells with Spatially Varying Curvature
The combination of variable-angle tow composites with shell geometries presents significant potential in various engineering and technical applications, particularly with regard to structural performance. Nevertheless, the numerical modeling of these structures can be challenging, as the larger number of unknowns significantly increases computational effort. The Carrera’s unified formulation has demonstrated promising results in the analysis of plates and shells reinforced with curvilinear fibers, offering an effective balance between numerical accuracy and the number of variables. This paper extends the unified formulation to more complex variable-angle tow shell structures characterized by variable curvature radii within their physical domain. The governing equations of the dynamic problem are derived using a displacement-based variational method, and the results are validated through comparisons with reference solutions from Abaqus 3D models. The First-Order Shear Deformation Theory (FSDT) is presented for a broader comparison of the proposed models. The maximum percentage error in terms of frequency shift observed for the FSDT model is , whereas the corresponding error for the most refined model is only . Across all examined cases, the computed fundamental frequencies and mode shapes closely match the reference results, demonstrating the reliability and effectiveness of the proposed method. - Open Access
- 22 February 2025
- Published by Elsevier in Composite Structures
- Vol. 359
Modeling of variable angle tow composites using a variable separation method based on a unified formulation
- 22 February 2025
- Published by Elsevier in Composite Structures
- Vol. 359
Open AccessModeling of variable angle tow composites using a variable separation method based on a unified formulation
- Open Access
- 24 January 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (2) , 55
Hierarchical Free Vibration Analysis of Variable-Angle Tow Shells Using Unified Formulation
This paper investigates the dynamic behavior of shell structures presenting variable-angle tow laminations. The choice of placing fibers along curvilinear patterns allows for a broader structural design space, which is advantageous in several engineering contexts, provided that more complex numerical analyses are managed. In this regard, Carrera’s unified formulation has been widely used for studying variable-angle tow plates and shells. This article aims to expand this formulation through the derivation of the complete formulation for a generic shell reference surface. The principle of virtual displacements is used as a variational statement for obtaining, in a weak sense, the stiffness and mass matrices within the finite element solution method. The free vibration problem of singly and doubly curved variable-angle tow shells is then addressed. The proposed approach is compared to Abaqus three-dimensional reference solutions and classical theories to investigate the effectiveness of the developed models in predicting the vibrational frequencies and modes. The results demonstrate a good agreement between the proposed approach and reference solutions.
- 24 January 2025
- Published by MDPI AG in Journal of Composites Science
- Vol. 9 (2) , 55
Open AccessHierarchical Free Vibration Analysis of Variable-Angle Tow Shells Using Unified Formulation
This paper investigates the dynamic behavior of shell structures presenting variable-angle tow laminations. The choice of placing fibers along curvilinear patterns allows for a broader structural design space, which is advantageous in several engineering contexts, provided that more complex numerical analyses are managed. In this regard, Carrera’s unified formulation has been widely used for studying variable-angle tow plates and shells. This article aims to expand this formulation through the derivation of the complete formulation for a generic shell reference surface. The principle of virtual displacements is used as a variational statement for obtaining, in a weak sense, the stiffness and mass matrices within the finite element solution method. The free vibration problem of singly and doubly curved variable-angle tow shells is then addressed. The proposed approach is compared to Abaqus three-dimensional reference solutions and classical theories to investigate the effectiveness of the developed models in predicting the vibrational frequencies and modes. The results demonstrate a good agreement between the proposed approach and reference solutions.
- Open Access
- 13 August 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (8) , 320
Buckling Analysis of Variable-Angle Tow Composite Plates through Variable Kinematics Hierarchical Models
Variable-Angle Tow (VAT) laminates can improve straight fiber composites’ mechanical properties thanks to the application of curvilinear fibers. This characteristic allows one to achieve ambitious objectives for design and performance purposes. Nevertheless, the wider design space and the higher number of parameters result in a more complex structural problem. Among the various approaches that have been used for VAT study, Carrera’s Unified Formulation (CUF) allows one to obtain multiple theories within the same framework, guaranteeing a good compromise between the results’ accuracy and the computational cost. In this article, the linear buckling behavior of VAT laminates is analyzed through the extension of CUF 2D plate models within Reissner’s Mixed Variational Theorem (RMVT). The results show that RMVT can better approximate the prebuckling nonuniform stress field of the plate when compared to standard approaches, thus improving the prediction of the linear buckling loads of VAT composites.
- 13 August 2024
- Published by MDPI AG in Journal of Composites Science
- Vol. 8 (8) , 320
Open AccessBuckling Analysis of Variable-Angle Tow Composite Plates through Variable Kinematics Hierarchical Models
Variable-Angle Tow (VAT) laminates can improve straight fiber composites’ mechanical properties thanks to the application of curvilinear fibers. This characteristic allows one to achieve ambitious objectives for design and performance purposes. Nevertheless, the wider design space and the higher number of parameters result in a more complex structural problem. Among the various approaches that have been used for VAT study, Carrera’s Unified Formulation (CUF) allows one to obtain multiple theories within the same framework, guaranteeing a good compromise between the results’ accuracy and the computational cost. In this article, the linear buckling behavior of VAT laminates is analyzed through the extension of CUF 2D plate models within Reissner’s Mixed Variational Theorem (RMVT). The results show that RMVT can better approximate the prebuckling nonuniform stress field of the plate when compared to standard approaches, thus improving the prediction of the linear buckling loads of VAT composites.
- Open Access
- 16 May 2024
- Published by MDPI AG in Preprints.org
Buckling Analysis of Variable-Angle Tow composite Plates Through Variable Kinematics Hierarchical Models
Variable-Angle Tow (VAT) laminates can improve straight fiber composites mechanical properties thanks to the application of curvilinear fibers. This characteristic allows to achieve ambitious objectives for design and performance purposes. Nevertheless, the wider design space and the higher number of parameters result in a more complex structural problem. Among the various approaches that have been used for VATs study, Carrera’s Unified Formulation (CUF) allows to obtain multiple theories within the same framework, guaranteeing a good compromise between the results accuracy and the computational cost. In this article, the linear buckling behavior of VAT laminates is analyzed through the extension of CUF 2D plate models within the Reissner’s Mixed Variational Theorem (RMVT). Results show that RMVT can better approximate the prebuckling non-uniform stress field of the plate when compared to standard approaches, thus improving the prediction of the linear buckling loads of VAT composites.
- 16 May 2024
- Published by MDPI AG in Preprints.org
Open AccessBuckling Analysis of Variable-Angle Tow composite Plates Through Variable Kinematics Hierarchical Models
Variable-Angle Tow (VAT) laminates can improve straight fiber composites mechanical properties thanks to the application of curvilinear fibers. This characteristic allows to achieve ambitious objectives for design and performance purposes. Nevertheless, the wider design space and the higher number of parameters result in a more complex structural problem. Among the various approaches that have been used for VATs study, Carrera’s Unified Formulation (CUF) allows to obtain multiple theories within the same framework, guaranteeing a good compromise between the results accuracy and the computational cost. In this article, the linear buckling behavior of VAT laminates is analyzed through the extension of CUF 2D plate models within the Reissner’s Mixed Variational Theorem (RMVT). Results show that RMVT can better approximate the prebuckling non-uniform stress field of the plate when compared to standard approaches, thus improving the prediction of the linear buckling loads of VAT composites.
- Open Access
- 10 November 2023
- Published by Elsevier in Composite Structures
- Vol. 327
A mechanical analysis of variable angle-tow composite plates through variable kinematics models based on Carrera’s unified formulation
- 10 November 2023
- Published by Elsevier in Composite Structures
- Vol. 327
Open AccessA mechanical analysis of variable angle-tow composite plates through variable kinematics models based on Carrera’s unified formulation