Vamsi Spandan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Vamsi Spandan has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Detlef Lohse
University of Twente
5 shared publications Roberto Verzicco
4 shared publications- Roberto Verzicco
Gran Sasso Science Institute
4 shared publications - Rodolfo Ostilla-Mónico
Universidad de Cádiz
4 shared publications Detlef Lohse
3 shared publicationsMarco D. de Tullio
2 shared publications
Latest Publications
- Open Access
- 12 August 2020
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 900
Non-monotonic transport mechanisms in vertical natural convection with dispersed light droplets
We present results on the effect of dispersed droplets in vertical natural convection (VC) using direct numerical simulations based on a two-way fully coupled Euler–Lagrange approach with a liquid phase and a dispersed droplets phase. For increasing thermal driving, characterised by the Rayleigh number, Ra, of the two analysed droplet volume fractions, from our data supports this notion.
- 12 August 2020
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 900
Open AccessNon-monotonic transport mechanisms in vertical natural convection with dispersed light droplets
We present results on the effect of dispersed droplets in vertical natural convection (VC) using direct numerical simulations based on a two-way fully coupled Euler–Lagrange approach with a liquid phase and a dispersed droplets phase. For increasing thermal driving, characterised by the Rayleigh number, Ra, of the two analysed droplet volume fractions, from our data supports this notion.
- Open Access
- 3 April 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6 (14) , eaba0461
Fluctuation-induced force in homogeneous isotropic turbulence
We find an analog to the quantum Casimir effect in a turbulent fluid.
- 3 April 2020
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 6 (14) , eaba0461
Open AccessFluctuation-induced force in homogeneous isotropic turbulence
We find an analog to the quantum Casimir effect in a turbulent fluid.
- 1 December 2018
- Published by Elsevier in Journal of Computational Physics
- Vol. 375, 228-239
A fast moving least squares approximation with adaptive Lagrangian mesh refinement for large scale immersed boundary simulations
- 1 December 2018
- Published by Elsevier in Journal of Computational Physics
- Vol. 375, 228-239
A fast moving least squares approximation with adaptive Lagrangian mesh refinement for large scale immersed boundary simulations
- Open Access
- 27 June 2018
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 849
Physical mechanisms governing drag reduction in turbulent Taylor–Couette flow with finite-size deformable bubbles
The phenomenon of drag reduction induced by injection of bubbles into a turbulent carrier fluid has been known for a long time; the governing control parameters and underlying physics is, however, not well understood. In this paper, we use three-dimensional numerical simulations to uncover the effect of deformability of bubbles injected in a turbulent Taylor–Couette flow on the overall drag experienced by the system. We consider two different Reynolds numbers for the carrier flow, i.e. $Re_{i}=5\times 10^{3}$ and $Re_{i}=2\times 10^{4}$ ; the deformability of the bubbles is controlled through the Weber number, which is varied in the range $We=0.01{-}2.0$ . Our numerical simulations show that increasing the deformability of bubbles (that is, $We$ ) leads to an increase in drag reduction. We look at the different physical effects contributing to drag reduction and analyse their individual contributions with increasing bubble deformability. Profiles of local angular velocity flux show that, in the presence of bubbles, turbulence is enhanced near the inner cylinder while attenuated in the bulk and near the outer cylinder. We connect the increase in drag reduction to the decrease in dissipation in the wake of highly deformed bubbles near the inner cylinder.- 27 June 2018
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 849
Open AccessPhysical mechanisms governing drag reduction in turbulent Taylor–Couette flow with finite-size deformable bubbles
The phenomenon of drag reduction induced by injection of bubbles into a turbulent carrier fluid has been known for a long time; the governing control parameters and underlying physics is, however, not well understood. In this paper, we use three-dimensional numerical simulations to uncover the effect of deformability of bubbles injected in a turbulent Taylor–Couette flow on the overall drag experienced by the system. We consider two different Reynolds numbers for the carrier flow, i.e. $Re_{i}=5\times 10^{3}$ and $Re_{i}=2\times 10^{4}$ ; the deformability of the bubbles is controlled through the Weber number, which is varied in the range $We=0.01{-}2.0$ . Our numerical simulations show that increasing the deformability of bubbles (that is, $We$ ) leads to an increase in drag reduction. We look at the different physical effects contributing to drag reduction and analyse their individual contributions with increasing bubble deformability. Profiles of local angular velocity flux show that, in the presence of bubbles, turbulence is enhanced near the inner cylinder while attenuated in the bulk and near the outer cylinder. We connect the increase in drag reduction to the decrease in dissipation in the wake of highly deformed bubbles near the inner cylinder. - 1 November 2017
- Published by Elsevier in Journal of Computational Physics
- Vol. 348, 567-590
A parallel interaction potential approach coupled with the immersed boundary method for fully resolved simulations of deformable interfaces and membranes
- 1 November 2017
- Published by Elsevier in Journal of Computational Physics
- Vol. 348, 567-590
A parallel interaction potential approach coupled with the immersed boundary method for fully resolved simulations of deformable interfaces and membranes
- Open Access
- 16 October 2017
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 2 (10) , 104304
Deformable ellipsoidal bubbles in Taylor-Couette flow with enhanced Euler-Lagrangian tracking
In this work we present numerical simulations of sub-Kolmogorov deformable bubbles dispersed in Taylor-Couette flow (a wall-bounded shear system) with rotating inner cylinder and outer cylinder at rest. We study the effect of deformability of the bubbles on the overall drag induced by the carrier fluid in the two-phase system. We find that an increase in deformability of the bubbles results in enhanced drag reduction due to a more pronounced accumulation of the deformed bubbles near the driving inner wall. This preferential accumulation is induced by an increase in the resistance to the motion of the bubbles in the wall-normal direction. The increased resistance is linked to the strong deformation of the bubbles near the wall which makes them prolate (stretched along one axis) and orient along the streamwise direction. A larger concentration of the bubbles near the driving wall implies that they are more effective in weakening the plume ejections which results in stronger drag reduction effects. These simulations which are practically impossible with fully resolved techniques are made possible by coupling a subgrid deformation model with two-way coupled Euler-Lagrangian tracking of sub-Kolmogorov bubbles dispersed in a turbulent flow field which is solved through direct numerical simulations. The bubbles are considered to be ellipsoidal in shape and their deformation is governed by an evolution equation which depends on the local flow conditions and their surface tension.- 16 October 2017
- Published by American Physical Society (APS) in Physical Review Fluids
- Vol. 2 (10) , 104304
Open AccessDeformable ellipsoidal bubbles in Taylor-Couette flow with enhanced Euler-Lagrangian tracking
In this work we present numerical simulations of sub-Kolmogorov deformable bubbles dispersed in Taylor-Couette flow (a wall-bounded shear system) with rotating inner cylinder and outer cylinder at rest. We study the effect of deformability of the bubbles on the overall drag induced by the carrier fluid in the two-phase system. We find that an increase in deformability of the bubbles results in enhanced drag reduction due to a more pronounced accumulation of the deformed bubbles near the driving inner wall. This preferential accumulation is induced by an increase in the resistance to the motion of the bubbles in the wall-normal direction. The increased resistance is linked to the strong deformation of the bubbles near the wall which makes them prolate (stretched along one axis) and orient along the streamwise direction. A larger concentration of the bubbles near the driving wall implies that they are more effective in weakening the plume ejections which results in stronger drag reduction effects. These simulations which are practically impossible with fully resolved techniques are made possible by coupling a subgrid deformation model with two-way coupled Euler-Lagrangian tracking of sub-Kolmogorov bubbles dispersed in a turbulent flow field which is solved through direct numerical simulations. The bubbles are considered to be ellipsoidal in shape and their deformation is governed by an evolution equation which depends on the local flow conditions and their surface tension. - 14 November 2016
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 809, 480-501
Deformation and orientation statistics of neutrally buoyant sub-Kolmogorov ellipsoidal droplets in turbulent Taylor–Couette flow
The influence of the underlying flow topology on the shape and size of sub-Kolmogorov droplets dispersed in a turbulent flow is of considerable interest in many industrial and scientific applications. In this work we study the deformation and orientation statistics of sub-Kolmogorov droplets dispersed into a turbulent Taylor–Couette flow. Along with direct numerical simulations (DNS) of the carrier phase and Lagrangian tracking of the dispersed droplets, we solve a phenomenological equation proposed by Maffettone and Minale (J. Non-Newtonian Fluid Mech., vol. 78, 1998, pp. 227–241) to track the shape evolution and orientation of approximately $10^{5}$ ellipsoidal droplets. By varying the capillary number $Ca$ and viscosity ratio $\hat{\unicode[STIX]{x1D707}}$ of the droplets we find that they deform more with increasing capillary number $Ca$ and this effect is more pronounced in the boundary layer regions. This indicates that along with an expected capillary number effect there is also a strong correlation between spatial position and degree of deformation of the droplet. Regardless of the capillary number $Ca$ , the major axis of the ellipsoids tends to align with the streamwise direction and the extensional strain rate eigendirection in the boundary layer region while the distribution is highly isotropic in the bulk due to the strong mixing provided by the large-scale vortical structures. When the viscosity ratio between the droplet and the carrier fluid is increased we find that there is no preferential stretched axis which is due to the increased influence of rotation over stretching and relaxation. Droplets in high viscosity ratio systems are thus less deformed and oblate (disk-like) as compared to highly deformed prolate (cigar-like) droplets in low viscosity ratio systems.- 14 November 2016
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 809, 480-501
Deformation and orientation statistics of neutrally buoyant sub-Kolmogorov ellipsoidal droplets in turbulent Taylor–Couette flow
The influence of the underlying flow topology on the shape and size of sub-Kolmogorov droplets dispersed in a turbulent flow is of considerable interest in many industrial and scientific applications. In this work we study the deformation and orientation statistics of sub-Kolmogorov droplets dispersed into a turbulent Taylor–Couette flow. Along with direct numerical simulations (DNS) of the carrier phase and Lagrangian tracking of the dispersed droplets, we solve a phenomenological equation proposed by Maffettone and Minale (J. Non-Newtonian Fluid Mech., vol. 78, 1998, pp. 227–241) to track the shape evolution and orientation of approximately $10^{5}$ ellipsoidal droplets. By varying the capillary number $Ca$ and viscosity ratio $\hat{\unicode[STIX]{x1D707}}$ of the droplets we find that they deform more with increasing capillary number $Ca$ and this effect is more pronounced in the boundary layer regions. This indicates that along with an expected capillary number effect there is also a strong correlation between spatial position and degree of deformation of the droplet. Regardless of the capillary number $Ca$ , the major axis of the ellipsoids tends to align with the streamwise direction and the extensional strain rate eigendirection in the boundary layer region while the distribution is highly isotropic in the bulk due to the strong mixing provided by the large-scale vortical structures. When the viscosity ratio between the droplet and the carrier fluid is increased we find that there is no preferential stretched axis which is due to the increased influence of rotation over stretching and relaxation. Droplets in high viscosity ratio systems are thus less deformed and oblate (disk-like) as compared to highly deformed prolate (cigar-like) droplets in low viscosity ratio systems.- 6 June 2016
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 798, 411-435
Drag reduction in numerical two-phase Taylor–Couette turbulence using an Euler–Lagrange approach
Two-phase turbulent Taylor–Couette (TC) flow is simulated using an Euler–Lagrange approach to study the effects of a secondary phase dispersed into a turbulent carrier phase (here bubbles dispersed into water). The dynamics of the carrier phase is computed using direct numerical simulations (DNS) in an Eulerian framework, while the bubbles are tracked in a Lagrangian manner by modelling the effective drag, lift, added mass and buoyancy force acting on them. Two-way coupling is implemented between the dispersed phase and the carrier phase which allows for momentum exchange among both phases and to study the effect of the dispersed phase on the carrier phase dynamics. The radius ratio of the TC setup is fixed to ${\it\eta}=0.833$ , and a maximum inner cylinder Reynolds number of $Re_{i}=8000$ is reached. We vary the Froude number ( $Fr$ ), which is the ratio of the centripetal to the gravitational acceleration of the dispersed phase and study its effect on the net torque required to drive the TC system. For the two-phase TC system, we observe drag reduction, i.e. the torque required to drive the inner cylinder is lower compared with that of the single-phase system. The net drag reduction decreases with increasing Reynolds number $Re_{i}$ , which is consistent with previous experimental findings (Murai et al., J. Phys.: Conf. Ser., vol. 14, 2005, pp. 143–156; Phys. Fluids, vol. 20(3), 2008, 034101). The drag reduction is strongly related to the Froude number: for fixed Reynolds number we observe higher drag reduction when $Fr<1$ than for with $Fr>1$ . This buoyancy effect is more prominent in low $Re_{i}$ systems and decreases with increasing Reynolds number $Re_{i}$ . We trace the drag reduction back to the weakening of the angular momentum carrying Taylor rolls by the rising bubbles. We also investigate how the motion of the dispersed phase depends on $Re_{i}$ and $Fr$ , by studying the individual trajectories and mean dispersion of bubbles in the radial and axial directions. Indeed, the less buoyant bubbles (large $Fr$ ) tend to get trapped by the Taylor rolls, while the more buoyant bubbles (small $Fr$ ) rise through and weaken them.- 6 June 2016
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 798, 411-435
Drag reduction in numerical two-phase Taylor–Couette turbulence using an Euler–Lagrange approach
Two-phase turbulent Taylor–Couette (TC) flow is simulated using an Euler–Lagrange approach to study the effects of a secondary phase dispersed into a turbulent carrier phase (here bubbles dispersed into water). The dynamics of the carrier phase is computed using direct numerical simulations (DNS) in an Eulerian framework, while the bubbles are tracked in a Lagrangian manner by modelling the effective drag, lift, added mass and buoyancy force acting on them. Two-way coupling is implemented between the dispersed phase and the carrier phase which allows for momentum exchange among both phases and to study the effect of the dispersed phase on the carrier phase dynamics. The radius ratio of the TC setup is fixed to ${\it\eta}=0.833$ , and a maximum inner cylinder Reynolds number of $Re_{i}=8000$ is reached. We vary the Froude number ( $Fr$ ), which is the ratio of the centripetal to the gravitational acceleration of the dispersed phase and study its effect on the net torque required to drive the TC system. For the two-phase TC system, we observe drag reduction, i.e. the torque required to drive the inner cylinder is lower compared with that of the single-phase system. The net drag reduction decreases with increasing Reynolds number $Re_{i}$ , which is consistent with previous experimental findings (Murai et al., J. Phys.: Conf. Ser., vol. 14, 2005, pp. 143–156; Phys. Fluids, vol. 20(3), 2008, 034101). The drag reduction is strongly related to the Froude number: for fixed Reynolds number we observe higher drag reduction when $Fr<1$ than for with $Fr>1$ . This buoyancy effect is more prominent in low $Re_{i}$ systems and decreases with increasing Reynolds number $Re_{i}$ . We trace the drag reduction back to the weakening of the angular momentum carrying Taylor rolls by the rising bubbles. We also investigate how the motion of the dispersed phase depends on $Re_{i}$ and $Fr$ , by studying the individual trajectories and mean dispersion of bubbles in the radial and axial directions. Indeed, the less buoyant bubbles (large $Fr$ ) tend to get trapped by the Taylor rolls, while the more buoyant bubbles (small $Fr$ ) rise through and weaken them.- Open Access
- 29 April 2016
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 708 (1) , 012006
Identifying coherent structures and vortex clusters in Taylor-Couette turbulence
The nature of the underlying structures in Taylor-Couette (TC) flow, the flow between two co-axial and independently rotating cylinders is investigated by two methods. First, the quadrant analysis technique for identifying structures with intense radial-azimuthal stresses (also referred to as 'Q's) of Lozano-Durán et al., (J. Fluid Mech. 694, 100-130) is used to identify the main structures responsible for the transport of angular velocity. Second, the vortex clusters are identified based on the analysis by del Álamo et al., (J. Fluid. Mech., 561, 329-358). In order to test these criteria, two different radius ratios η = ri/ro are considered, where ri and ro are the radii of inner and outer cylinder, respectively: (i) η = 0.5 and (ii) η = 0.909, which correspond to high and low curvature geometries, respectively and have different underlying structures. The Taylor rolls, i.e. the large-scale coherent structures, are effectively captured as 'Q's for the low curvature setup and it is observed that curvature plays a dominant role in influencing the size and volumes of these 'Q's. On the other hand, the vortex clusters are smaller in size when compared to the 'Q' structures. These vortex clusters are found to be taller in the case of η = 0.909, while the distribution of the lengths of these clusters is almost homogenous for both radius ratios.
- 29 April 2016
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 708 (1) , 012006
Open AccessIdentifying coherent structures and vortex clusters in Taylor-Couette turbulence
The nature of the underlying structures in Taylor-Couette (TC) flow, the flow between two co-axial and independently rotating cylinders is investigated by two methods. First, the quadrant analysis technique for identifying structures with intense radial-azimuthal stresses (also referred to as 'Q's) of Lozano-Durán et al., (J. Fluid Mech. 694, 100-130) is used to identify the main structures responsible for the transport of angular velocity. Second, the vortex clusters are identified based on the analysis by del Álamo et al., (J. Fluid. Mech., 561, 329-358). In order to test these criteria, two different radius ratios η = ri/ro are considered, where ri and ro are the radii of inner and outer cylinder, respectively: (i) η = 0.5 and (ii) η = 0.909, which correspond to high and low curvature geometries, respectively and have different underlying structures. The Taylor rolls, i.e. the large-scale coherent structures, are effectively captured as 'Q's for the low curvature setup and it is observed that curvature plays a dominant role in influencing the size and volumes of these 'Q's. On the other hand, the vortex clusters are smaller in size when compared to the 'Q' structures. These vortex clusters are found to be taller in the case of η = 0.909, while the distribution of the lengths of these clusters is almost homogenous for both radius ratios.