JDJoão Duarte

João Duarte

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


João Duarte has a total of 23 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • MARLON: MARine Litter Object detectioN

    by Francisco Cruz Macedo, Luís Macedo, João Duarte, Gil Gonçalves

  • Open Access

    Utilização de geotecnologias na reprodução e recuperação de património, reflexão ética e caso de estudo

    by Fernando Manuel da Conceição Costa, Maria Julia Sobral da Fonseca, João Duarte

    Todos nós, tal como os objetos que nos rodeiam, estamos em permanente processo de degradação pela simples razão de nos situarmos sobre a superfície do globo terrestre e interagirmos com a atmosfera que nos envolve. Desta circunstância decorre, que, inexoravelmente, padecemos de processos oxidativos - uma imprecação incontornável que, em simultâneo, nos autoriza as comodidades da nossa natureza terrena. A degradação, de todos, é um processo evolutivo e conduz inevitavelmente à não existência, num limite temporal mais ou menos curto - em algum momento do futuro, não existirão, de facto, as pirâmides no Egipto, a Mona Lisa no Louvre, ou, Big Ben em Londres, etc. – nessa altura, talvez a venha a ser considerado previdente termos feito pelo menos algumas cópias; ou não. Também podemos considerar a hipótese de, por essa altura, já termos deixado de dar importância ao passado, só pensando no futuro imediato, como a maioria dos animais que hoje nos rodeiam. Neste artigo pretendemos apresentar uma reflexão ética sobre a encruzilhada em que nos encontramos e apresentar um exemplo de uma intervenção que faz uso de tecnologia para “criar arte antiga hoje”, mas que mantém na nossa realidade atual património que já se tinha perdido quanto à sua integridade física para além dos limites da recuperação pelo restauro tradicional. Como resultado final do trabalho de todos os peritos envolvidos foi recolocada in situ a reprodução de uma escultura em pedra, produzida por CNC, para substituir a irrecuperável que originalmente se situava num enquadramento escultórico simétrico. São referidas as particularidades do equipamento utilizado que permitiram resolver este desafio de restauro, bem como as preocupações éticas surgidas ao longo de todo o seu processo.


  • Open Access

    Integrated use of geotechnologies and virtual reality to visualize and evaluate rock masses. Case study: Fátima-Portugal

    by João Duarte, Jorge Cardoso

    This work follows on from previous work on 3D photogrammetric modelling of rock masses, using the Structure from motion (SfM) technique and dense correlation as a basis. Photogrammetric 3D modelling is a technique that uses photographs to create three-dimensional models of objects or environments. In the context of rock masses, this approach is especially relevant for understanding the geometry and structure of these formations.Based on this concept, this work was developed with the integration of techniques, photogrammetric data acquisition and 3D photogrammetric modelling, from images acquired with an Unmanned Aerial Vehicle (UAV), and virtual reality (VR) technology, allowing users to explore the 3D model interactively. In this way, a realistic virtual environment is created, with the feeling of being present and experiencing a full-scale simulated environment, which makes it possible to visualise the rock mass from different perspectives and assess its structural geological characteristics and monitoring.The application of this technique to other areas of study (environmental changes and natural hazards), using other sensors (multispectral/hyperspectral optical, thermal sensors, LIDAR) that allow techniques for data fusion, is being studied considering the development of multi-platform and inter-disciplinary surveillance.

  • Open Access

    Use of geotechnologies in mining planning in Quarries carbonated rocks - Contribution to the digital transition (Industry 4.0)

    by João Duarte, Francisco Sousa, Bruno Valente

    As part of the strategy for Industry 4.0, this work was developed to outline a methodology that is an important contribution to improve the efficiency and productivity of processes in the ornamental stone extraction industry. Since this sector is important for the Portuguese economy, it is imperative to optimize processes to improve their efficiency in the use of resources, economic valuation, and economic viability. Knowing that one of the main factors to take into account in the feasibility of an exploration of ornamental rocks is the density, persistence and attitude of the discontinuities present in the rock mass, a methodology is proposed that aims to map and characterize the existing discontinuities in the using the latest digital technologies and whenever possible open access (CloudCompare, Stereonet, 3D Block Expert). To this end, work was initially carried out on an active exploration front, identifying and characterizing, through the traditional method (compass and clinometer) and photogrammetry, existing discontinuities and statistically analysing their occurrence. The data analysis shows a variation in the attitude of the discontinuities in a range of -17.72 ° to 14.7 °, this variation corresponding to the strike. As a percentage, there is also a variation in the range of values, from -5.30% to 4.91%, with the reference value being the value obtained by the photogrammetric method. This step was also used to compare the acquired data and verify the variations between them depending on the method used. Photogrammetry was used with another complementary purpose, but very important for the proposed methodology, which is related to the 3D modelling of the fronts and the subsequent projection or extraction of the existing discontinuity plans. The determination of the attitude of the discontinuities was obtained through the manipulation of the point clouds obtained by the photogrammetric modelling, based on the technique of Structure for Motion [SfM] and application of the RANSAC Shape Detection algorithm of the CloudCompare® program, which allows the determination of the attitude of the discontinuities. The characterization of the discontinuities by the photogrammetric method provided the data that was used in the present study to calculate the blocometry in that sector. This was calculated using the 3D BlockExpert software, based on the exploration sequences. The program calculated the predicted volumes in each one, based on a standard dimension for the block of 2.7 × 3.0 × 2.0 meters. As a result, it was possible to compare a number of blocks the value predicted by the 449 modellings and the number of blocks produced 490. This difference of approximately 10% for this order of magnitude is acceptable and confirms the reliability of the proposed methodology. This evaluation using Geotechnologies allows data modelling to be effectively an important process in the planning of the extractive process, and with the development of this approach, it may introduce in a second phase the decision automation of the extractive process, based on economic and commercial criteria and last and third stage, the automation of the extractive process.

  • Open Access

    Modeling and Comparison of Data Obtained by GPR, for Geological / Structural Analysis of a Carbonated Ornamental Rock Quarry - Blocometry Validation - Case Study in Valinho De Fátima, Portugal

    by João Duarte, Marco Cunha, José Carvalho

    Portugal, in the continental and insular territory, has raw geological resources in diversity and quality that are materials for the manufacturing industries, particularly linked to the civil construction, architecture and public works with great weight in its exports, revealing to be one big producer of ornamental stones worldwide. In this industry, the presence of discontinuities, grain size, colour, textural anisotropy and porosity are factors that can determine the economic viability of the exploitations. For this, it is important to develop effective prospecting routines that allow the geological/structural fast analysis and economic potential assessment of the massifs and subsequent correct planning and dimensioning of the exploitations. This work intends to model and integrate data from the ground penetration radar (GPR), together with close-range photogrammetry, derived from an Unmanned aerial vehicle (UAV) imagery. The objective is to identify and determine the spatial distribution of the various elements by modelling the acquired data, as well as verifying the feasibility of the technical disassembly option adopted. We have used GPR as it is non-destructive, fast to deploy, survey, process and interpret. The acquired data were processed using the GPR-SLICE, where a 3D final dataset was obtained and interpreted. GPR and photogrammetric model was integrated and interpreted and validated with direct field observations. The model obtained showed in its upper part, an area corresponding to the presence of sludge from the cut of the rock, followed by a strip that corresponds to the oolitic limestone. Further down to the end of the block, the presence of oolitic limestone with crossed stratification is identifiable. There was a textural and structural correspondence between the GPR data and direct field observations. GPR did not reveal any major morphostructural discontinuity, validating the technical option of choosing the places where the cuts were made for their individualization, as the block was cut clean. The GPR and photogrammetry data integration method revealed to be complementary, where results were obtained easily, fast, and with centimeter accuracy. The same methodology presented, revealed to be cheap and effective for both localized studies and optimization of the overall quarry’s extraction plan and design.


  • Open Access

    Use of Ground Penetration Radar (GPR) in the Evaluation of Geological-Structural Elements of Ornamental Carbonated Rocks - Case Study in Valinho De Fatima, Portugal

    by Joao Duarte, Jose Carvalho, Fernando Figueiredo

    In the extractive industry of carbonated ornamental rocks, the presence of discontinuities, size of grain, colour, textural anisotropy and porosity are factors that determine the extraction planning and their economic viability. This characterization is important for the planning and scaling of the exploitation. The objective of this work was in first, using the penetration radar in the soil (GPR), to identify and determine the spatial distribution of these elements. The choice of this non-destructive geophysical method to perform the work was because it is a fast method of inspection, having a good horizontal and vertical resolution, and relative precision. for this purpose, a PULSEEKKO GPR (SENSORS & SOFTWARE) acquisition equipment was used, with a system of two bi-static antennas (transmitter and receiver), unshielded, with a frequency of 100 MHz, using the reflection method with a common offset and with an antenna separation of 1,00 meter (m), at the pre-defined locations at each level of the quarry. The acquired data were subsequently processed in the REFLEXW® vers. Software. 7.5.9, from SANDMEIER-GEO®. The multiple profiles obtained (radargrams) [1], [2], which were compared with the corresponding exploitation fronts. This comparison allows validating the methodology used in the identification of existing structures, their vertical and horizontal limits and spatial relations between them.

  • Open Access

    The Use of Dolostone in Historical Buildings of Coimbra (Central Portugal)

    by Lidia Catarino, Roque Figueiredo, Fernando Pedro Figueiredo, Pedro Andrade, João Duarte

    In this paper, the importance of the dolostone (a carbonate sedimentary rock where the dominant carbonate mineral is dolomite) in monuments and urban buildings of the city of Coimbra, Portugal, is highlighted. Old quarries are not visible in the nucleus of the city, due to the sequential occupation by houses, and can only be identified by documentation (draws, contract letters and purchase orders). However, on the southern side of Mondego River (Santa Clara) some outcrops can be observed and were exploited until the mid-20th. It is presented a list of the old quarries and monuments made with this rock. The characterization of dolostones from the Coimbra Formation is also presented. It is made the connection between the local geology and the “identity” of Coimbra, putting in evidence the stone as a symbol that characterize the gilded aspect of the buildings. For restoration and rehabilitation works, a small number of blocks could be extracted from the Carvalhais quarry if were eventually necessary.


  • Open Access

    Use of Non-Destructive Methods in Structural Analysis of Petrous Materials - Ultrasonic Testing and Ground Penetrating Radar (GPR)

    by Joao Duarte, Daniela Pedrosa, Jose Carvalho, Fernando Figueiredo, Lidia Catarino

    In the extractive and transformation processing industry of ornamental rocks, the presence of discontinuities, grain size, porosity and textural anisotropies in the explored blocks is an economic risk factor. This study aims the identification and possible quantification of these elements. The existence of a low-cost, non-intrusive and fast inspection method for the evaluation of blocks would facilitate their use avoiding their wastage. For this purpose, two nondestructive methods ("P" Wave Ultrasonic Testing and the Ground Penetration Radar (GPR)) were tested on a limestone rock block and compared the models obtained. The portable ultrasound equipment used was a Proceq Pundit Lab (Portable Ultrasonic Non-Destructive Digital Indicating Tester) which is based on the pulse rate method with 54 KHz to provide information about the uniformity, cavities, cracks and defects of the material concerned by the measurement of the ultrasonic wave time and the measurement of the pulse rate. The equipment used for the GPR data acquisition was a PULSEEKKO GPR (SENSORS & SOFTWARE), with a system of two bistatic antennas (transmitter and receiver) with a frequency of 1 GHz, using the reflection method with a common offset and with an antenna separation of 0,15 meters [m]. To make a comparison of the results valid and representative, both tests were performed with 0,10 m spacing between measurements, according to a pre-defined and common grid. In the case of the ultrasonic test, velocity color maps were created based on the results of the measurements, and through this colors differences it was possible to detect and locate some of the individual and visible fractures, but also not visible fractures on the surface of the tested face. By increasing the distance between transducers, the measurement depth also increases, creating maps of the same face at different depths. This method allows us to create several GPR profiles (radargrams) were obtained because of the processing, and were used to create 2, 2,5 and 3D models to identify the existing structures, their vertical and horizontal limits and spatial relationships between them.


  • Accuracy and effectiveness of low cost UASs and open source photogrammetric software for foredunes mapping

    by Gil Rito Gonçalves, Juan Antonio Pérez, João Duarte

    The recent use and availability of small and low cost Unmanned Aerial Systems (UAS) and the development of Open Source Photogrammetric (OSP) software opens new opportunities for their intensive use in topographic monitoring of foredune dynamics. This study assesses the accuracy and effectiveness of high resolution Digital Surface Models (DSM) generated by the combined use of low-altitude UAS imagery and OSP software. The Photogrammetric Workflow (PW) has been optimized to address the use an action camera and non-autonomous flight mode. To evaluate the accuracy of the DSMs derived from dense matching of UAS imagery we use a reference DSM obtained by a Terrestrial Laser Scanner in the same survey period. Moreover, we use robust statistical indicators for assessing the vertical accuracy of both DSMs: the raw DSM and the denoised DSM. The results shows that a detailed UAS-based DSM with a spatial resolution of 5 cm and vertical accuracy of 10 cm (robust root mean square error) can be obtained by using the proposed PW. The results also suggest that this low cost technology can be used effectively for 3D mapping of foredunes.