Jörg Hübner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jörg Hübner has a total of 122 co-authors. Here are the top co-authors by number of shared publications:
- Anja Boisen
Technical University of Denmark
8 shared publications - Flemming Jensen
DTU Danchip Technical University of Denmark Kongens Lyngby 2800 Denmark
8 shared publications - Henri V. Jansen
DTU Danchip Technical University of Denmark Kongens Lyngby 2800 Denmark
7 shared publications M. Kristensen
7 shared publicationsAnders M. Jorgensen
Technical Univ. of Denmark (Denmark)
6 shared publicationsDan A. Zauner
Technical Univ. of Denmark (Denmark)
6 shared publications
Latest Publications
- Open Access
- 17 February 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (2)
Silicon dioxide dry etching by a consumable solid source and He plasma
The semiconductor and photonics industries rely heavily on gases, such as fluorocarbons, hydrofluorocarbons, perfluorinated compounds, and chlorofluorocarbons, for plasma-based processing. However, those gases have a high global warming potential. In the context of increasing sustainability demands and regulatory constraints, alternative etching approaches are urgently needed. This work presents a proof-of-concept method for the dry etching of silicon dioxide (SiO2) using a solid fluorocarbon source activated by helium plasma. The etching species are generated in situ from fluorocarbon solid material, which is gradually consumed during processing. This eliminates the need for continuous gas flow and significantly reduces emissions associated with both gas supply and abatement systems. The process achieves uniform SiO2 etching at rates exceeding 50 nm/min and enables the fabrication of nanostructures with lateral dimensions below 300 nm and aspect ratios greater than 5. The solid-source approach offers a promising pathway toward more sustainable and long-lasting plasma etching solutions, with potential to reduce the environmental footprint of micro- and nanofabrication processes.
- 17 February 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology A
- Vol. 44 (2)
Open AccessSilicon dioxide dry etching by a consumable solid source and He plasma
The semiconductor and photonics industries rely heavily on gases, such as fluorocarbons, hydrofluorocarbons, perfluorinated compounds, and chlorofluorocarbons, for plasma-based processing. However, those gases have a high global warming potential. In the context of increasing sustainability demands and regulatory constraints, alternative etching approaches are urgently needed. This work presents a proof-of-concept method for the dry etching of silicon dioxide (SiO2) using a solid fluorocarbon source activated by helium plasma. The etching species are generated in situ from fluorocarbon solid material, which is gradually consumed during processing. This eliminates the need for continuous gas flow and significantly reduces emissions associated with both gas supply and abatement systems. The process achieves uniform SiO2 etching at rates exceeding 50 nm/min and enables the fabrication of nanostructures with lateral dimensions below 300 nm and aspect ratios greater than 5. The solid-source approach offers a promising pathway toward more sustainable and long-lasting plasma etching solutions, with potential to reduce the environmental footprint of micro- and nanofabrication processes.
- Open Access
- 5 February 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 44 (2)
Highly selective anisotropic dry etching of smooth SiO2 nanostructures using SF6 plasma and Cr hard mask: Toward sustainable plasma etching
Smooth, high-aspect-ratio directional structures in oxides such as silica (SiO2) are essential for efficient diffraction in optical and nanophotonic devices. Achieving these features requires high pattern-transfer fidelity, anisotropic profiles, smooth surfaces, and uniform processing suitable for scalable, high-throughput production. We present a simplified model describing SiO2 etching dynamics in pure sulfur hexafluoride (SF6) plasmas, supported by experimental evidence from fabricated sub-300 nm structures via reactive ion etching using a chromium (Cr) hard mask. The etch rate exhibits a pronounced etch rate maximum of around 5 mTorr, which seems to be correlated with Paschen behavior. The influence of the reactor wall, electrode, and mask materials is examined, with an emphasis on mechanisms for the self-formation and suppression of nanoroughness via a cyclic etch process that allows for unprecedented selectivity. Furthermore, we will discuss the appearance of abnormalities such as faceting, footing, and microtrenching and how to suppress them. The developed process enables repeatable and scalable transfer of nanoscale resist patterns into dielectric materials. It results in anisotropic and highly selective etching with respect to Cr, without preconditioning or cleaning the etch tool. The method provides a gas-efficient alternative to conventional fluorocarbon-based etching processes.
- 5 February 2026
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 44 (2)
Open AccessHighly selective anisotropic dry etching of smooth SiO2 nanostructures using SF6 plasma and Cr hard mask: Toward sustainable plasma etching
Smooth, high-aspect-ratio directional structures in oxides such as silica (SiO2) are essential for efficient diffraction in optical and nanophotonic devices. Achieving these features requires high pattern-transfer fidelity, anisotropic profiles, smooth surfaces, and uniform processing suitable for scalable, high-throughput production. We present a simplified model describing SiO2 etching dynamics in pure sulfur hexafluoride (SF6) plasmas, supported by experimental evidence from fabricated sub-300 nm structures via reactive ion etching using a chromium (Cr) hard mask. The etch rate exhibits a pronounced etch rate maximum of around 5 mTorr, which seems to be correlated with Paschen behavior. The influence of the reactor wall, electrode, and mask materials is examined, with an emphasis on mechanisms for the self-formation and suppression of nanoroughness via a cyclic etch process that allows for unprecedented selectivity. Furthermore, we will discuss the appearance of abnormalities such as faceting, footing, and microtrenching and how to suppress them. The developed process enables repeatable and scalable transfer of nanoscale resist patterns into dielectric materials. It results in anisotropic and highly selective etching with respect to Cr, without preconditioning or cleaning the etch tool. The method provides a gas-efficient alternative to conventional fluorocarbon-based etching processes.
- 3 December 2018
- Published by Wiley in Advanced Optical Materials
- Vol. 7 (2)
Large Area Three‐Dimensional Photonic Crystal Membranes: Single‐Run Fabrication and Applications with Embedded Planar Defects
Three‐dimensional photonic crystals (3D PhCs) enable light manipulations in all three spatial dimensions, however, real world applications are still faced with challenges in fabrication. Here, a facile fabrication strategy for 3D silicon PhCs with a simple cubic (SC) lattice structure is presented, which exhibits a complete photonic bandgap at near‐infrared wavelengths of around 1100 nm. The fabrication process is composed of standard deep ultra‐violet stepper lithography, followed by a single‐run modified plasma etch process. By applying a direct dry etch release step at the end of the 3D structural etch process, the fabricated 3D PhCs can be released and transferred in the form of a membrane onto other substrates such as glass, polymers, or even substrates with engineered surface. The thickness of the demonstrated membranes is around 2 µm and the size can be up to a few millimeters. A high reflectivity is observed at the stop band frequency, and a planar defect is introduced during the etching process resulting in an optical resonance mode with a small linewidth of around 30 nm. The structure constitutes an optical bandpass filter and can be used as a sensor for organic solvents.
- 3 December 2018
- Published by Wiley in Advanced Optical Materials
- Vol. 7 (2)
Large Area Three‐Dimensional Photonic Crystal Membranes: Single‐Run Fabrication and Applications with Embedded Planar Defects
Three‐dimensional photonic crystals (3D PhCs) enable light manipulations in all three spatial dimensions, however, real world applications are still faced with challenges in fabrication. Here, a facile fabrication strategy for 3D silicon PhCs with a simple cubic (SC) lattice structure is presented, which exhibits a complete photonic bandgap at near‐infrared wavelengths of around 1100 nm. The fabrication process is composed of standard deep ultra‐violet stepper lithography, followed by a single‐run modified plasma etch process. By applying a direct dry etch release step at the end of the 3D structural etch process, the fabricated 3D PhCs can be released and transferred in the form of a membrane onto other substrates such as glass, polymers, or even substrates with engineered surface. The thickness of the demonstrated membranes is around 2 µm and the size can be up to a few millimeters. A high reflectivity is observed at the stop band frequency, and a planar defect is introduced during the etching process resulting in an optical resonance mode with a small linewidth of around 30 nm. The structure constitutes an optical bandpass filter and can be used as a sensor for organic solvents.
- 4 September 2018
- Published by Wiley in Chemnanomat
- Vol. 5 (1) , 92-100
Highly Ordered 3D Silicon Micro‐Mesh Structures Integrated with Nanowire Arrays: A Multifunctional Platform for Photodegradation, Photocurrent Generation, and Materials Conversion
Hierarchical three dimensional (3D) microstructures integrated with low‐dimensional nanomaterials can realize novel properties or improved performance. We report a unique conductive and highly ordered 3D silicon micro‐mesh structure, which is fabricated by standard lithography using a modified plasma etch process. Zinc oxide (ZnO) nanowires are then integrated with the micro‐mesh, and the density of ZnO nanowires (NWs) can be increased by around one order of magnitude compared with ZnO NWs on a 2D substrate. Owing to the high spatial density of ZnO NWs on the robust 3D silicon micro‐mesh structures, improved photocatalytic activity and stability can be achieved. A remarkable enhancement of photocurrent response is also observed. The ZnO can be converted into ZnS NWs and ZnO@ZIF‐8 as on the micromesh. This method is low‐cost and compatible with traditional complementary metal–oxide–semiconductor industries, and provides new possibilities for a wide range of devices based on micro‐nano‐electro‐mechanical and chemical systems.
- 4 September 2018
- Published by Wiley in Chemnanomat
- Vol. 5 (1) , 92-100
Highly Ordered 3D Silicon Micro‐Mesh Structures Integrated with Nanowire Arrays: A Multifunctional Platform for Photodegradation, Photocurrent Generation, and Materials Conversion
Hierarchical three dimensional (3D) microstructures integrated with low‐dimensional nanomaterials can realize novel properties or improved performance. We report a unique conductive and highly ordered 3D silicon micro‐mesh structure, which is fabricated by standard lithography using a modified plasma etch process. Zinc oxide (ZnO) nanowires are then integrated with the micro‐mesh, and the density of ZnO nanowires (NWs) can be increased by around one order of magnitude compared with ZnO NWs on a 2D substrate. Owing to the high spatial density of ZnO NWs on the robust 3D silicon micro‐mesh structures, improved photocatalytic activity and stability can be achieved. A remarkable enhancement of photocurrent response is also observed. The ZnO can be converted into ZnS NWs and ZnO@ZIF‐8 as on the micromesh. This method is low‐cost and compatible with traditional complementary metal–oxide–semiconductor industries, and provides new possibilities for a wide range of devices based on micro‐nano‐electro‐mechanical and chemical systems.
- 1 September 2018
- Published by Elsevier in Applied Surface Science
- Vol. 453, 365-372
In-depth evolution of chemical states and sub-10-nm-resolution crystal orientation mapping of nanograins in Ti(5 nm)/Au(20 nm)/Cr(3 nm) tri-layer thin films
- 1 September 2018
- Published by Elsevier in Applied Surface Science
- Vol. 453, 365-372
In-depth evolution of chemical states and sub-10-nm-resolution crystal orientation mapping of nanograins in Ti(5 nm)/Au(20 nm)/Cr(3 nm) tri-layer thin films
- 13 July 2018
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 28 (10) , 105012
DREM2: a facile fabrication strategy for freestanding three dimensional silicon micro- and nanostructures by a modified Bosch etch process
Three dimensional (3D) silicon micro- and nanostructures enable novel functionalities and better device performances in various fields. Fabrication of real 3D structures in a larger scale and wider applications has been proven to be limited by the technical difficulties during the fabrication process, which normally requires multiple process steps and techniques. Direct top-down fabrication processes by modifying a plasma etch process have been proposed and studied in previous studies. However, the repeatability, size uniformity and the maximal number of stacked layers were limited. Here we report a facile single run fabrication strategy for three dimensional silicon micro- and nanostructures. A good uniformity of suspended layer thickness has to be achieved and up to 10 stacked layers have been fabricated in a single run without other additional steps or post-process procedures. This is enabled by a modified multiplexed Bosch etch process, so called DREM (deposit, remove, etch, multistep), while the DREM etch is used to transfer the patterns into silicon, an extra isotropic etch creates a complete undercut and thus freestanding structures come into form. This method is easy to program and provides well-controlled etch profiles.
- 13 July 2018
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 28 (10) , 105012
DREM2: a facile fabrication strategy for freestanding three dimensional silicon micro- and nanostructures by a modified Bosch etch process
Three dimensional (3D) silicon micro- and nanostructures enable novel functionalities and better device performances in various fields. Fabrication of real 3D structures in a larger scale and wider applications has been proven to be limited by the technical difficulties during the fabrication process, which normally requires multiple process steps and techniques. Direct top-down fabrication processes by modifying a plasma etch process have been proposed and studied in previous studies. However, the repeatability, size uniformity and the maximal number of stacked layers were limited. Here we report a facile single run fabrication strategy for three dimensional silicon micro- and nanostructures. A good uniformity of suspended layer thickness has to be achieved and up to 10 stacked layers have been fabricated in a single run without other additional steps or post-process procedures. This is enabled by a modified multiplexed Bosch etch process, so called DREM (deposit, remove, etch, multistep), while the DREM etch is used to transfer the patterns into silicon, an extra isotropic etch creates a complete undercut and thus freestanding structures come into form. This method is easy to program and provides well-controlled etch profiles.
- Open Access
- 1 May 2018
- Published by Elsevier in Microelectronic Engineering
- Vol. 191, 77-83
DREM: Infinite etch selectivity and optimized scallop size distribution with conventional photoresists in an adapted multiplexed Bosch DRIE process
- 1 May 2018
- Published by Elsevier in Microelectronic Engineering
- Vol. 191, 77-83
Open AccessDREM: Infinite etch selectivity and optimized scallop size distribution with conventional photoresists in an adapted multiplexed Bosch DRIE process
- 28 February 2017
- Published by Springer Nature
- p. 331-353
Forest Climate in Vertical and Horizontal Scales
- 28 February 2017
- Published by Springer Nature
- p. 331-353
Forest Climate in Vertical and Horizontal Scales
- Open Access
- 11 November 2015
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 5 (12) , 2804-2811
Injection molded polymeric hard X-ray lenses
A novel and economical approach for fabricating compound refractive lenses for the purpose of focusing hard X-rays is described. A silicon master was manufactured by UV-lithography and deep reactive ion etching (DRIE). Sacrificial structures were utilized, which enabled accurate control of the etching profile and were removed after DRIE. By electroplating, an inverse nickel sample was obtained, which was used as a mold insert in a commercial polymer injection molding machine. A prototype lens made of polyethylene with a focal length of 350 mm was tested using synchrotron radiation at photon energies of 17 keV. A 55 µm long line focus with a minimal waist of 770 nm (FWHM) and a total lens transmittance of 32% were measured. Due to its suitability for cheap mass production, this highly efficient optics may find widespread use in hard X-ray instruments.
- 11 November 2015
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 5 (12) , 2804-2811
Open AccessInjection molded polymeric hard X-ray lenses
A novel and economical approach for fabricating compound refractive lenses for the purpose of focusing hard X-rays is described. A silicon master was manufactured by UV-lithography and deep reactive ion etching (DRIE). Sacrificial structures were utilized, which enabled accurate control of the etching profile and were removed after DRIE. By electroplating, an inverse nickel sample was obtained, which was used as a mold insert in a commercial polymer injection molding machine. A prototype lens made of polyethylene with a focal length of 350 mm was tested using synchrotron radiation at photon energies of 17 keV. A 55 µm long line focus with a minimal waist of 770 nm (FWHM) and a total lens transmittance of 32% were measured. Due to its suitability for cheap mass production, this highly efficient optics may find widespread use in hard X-ray instruments.
- 2 November 2015
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 25 (12) , 125013
Optimizing shape uniformity and increasing structure heights of deep reactive ion etched silicon x-ray lenses
Line-focusing compound silicon x-ray lenses with structure heights exceeding 300 μ m were fabricated using deep reactive ion etching. To ensure profile uniformity over the full height, a new strategy was developed in which the perimeter of the structures was defined by trenches of constant width. The remaining sacrificial material inside the lens cavities was removed by etching through the silicon wafer. Since the wafers become fragile after through-etching, they were then adhesively bonded to a carrier wafer. Individual chips were separated using laser micro machining and the 3D shape of fabricated lenses was thoroughly characterized by a variety of means. Optical testing using synchrotron radiation with a photon energy of 56 keV yielded a 300 μ m wide beam with a waist of 980 nm (full width at half maximum) at a focal length of 1.3 m. Optical aberrations are discussed in the context of the shape analysis, where a slight bowing of the lens sidewalls and an insufficiently uniform apex region are identified as resolution-limiting factors. Despite these, the proposed fabrication route proved a viable approach for producing x-ray lenses with large structure heights and provides the means to improve the resolution and capabilities of modern x-ray techniques such as x-ray microscopy and 3D x-ray diffraction.
- 2 November 2015
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 25 (12) , 125013
Optimizing shape uniformity and increasing structure heights of deep reactive ion etched silicon x-ray lenses
Line-focusing compound silicon x-ray lenses with structure heights exceeding 300 μ m were fabricated using deep reactive ion etching. To ensure profile uniformity over the full height, a new strategy was developed in which the perimeter of the structures was defined by trenches of constant width. The remaining sacrificial material inside the lens cavities was removed by etching through the silicon wafer. Since the wafers become fragile after through-etching, they were then adhesively bonded to a carrier wafer. Individual chips were separated using laser micro machining and the 3D shape of fabricated lenses was thoroughly characterized by a variety of means. Optical testing using synchrotron radiation with a photon energy of 56 keV yielded a 300 μ m wide beam with a waist of 980 nm (full width at half maximum) at a focal length of 1.3 m. Optical aberrations are discussed in the context of the shape analysis, where a slight bowing of the lens sidewalls and an insufficiently uniform apex region are identified as resolution-limiting factors. Despite these, the proposed fabrication route proved a viable approach for producing x-ray lenses with large structure heights and provides the means to improve the resolution and capabilities of modern x-ray techniques such as x-ray microscopy and 3D x-ray diffraction.