Optimizing shape uniformity and increasing structure heights of deep reactive ion etched silicon x-ray lenses
- 2 November 2015
- journal article
- Published by IOP Publishing in Journal of Micromechanics and Microengineering
- Vol. 25 (12) , 125013
Abstract
Line-focusing compound silicon x-ray lenses with structure heights exceeding 300 μ m were fabricated using deep reactive ion etching. To ensure profile uniformity over the full height, a new strategy was developed in which the perimeter of the structures was defined by trenches of constant width. The remaining sacrificial material inside the lens cavities was removed by etching through the silicon wafer. Since the wafers become fragile after through-etching, they were then adhesively bonded to a carrier wafer. Individual chips were separated using laser micro machining and the 3D shape of fabricated lenses was thoroughly characterized by a variety of means. Optical testing using synchrotron radiation with a photon energy of 56 keV yielded a 300 μ m wide beam with a waist of 980 nm (full width at half maximum) at a focal length of 1.3 m. Optical aberrations are discussed in the context of the shape analysis, where a slight bowing of the lens sidewalls and an insufficiently uniform apex region are identified as resolution-limiting factors. Despite these, the proposed fabrication route proved a viable approach for producing x-ray lenses with large structure heights and provides the means to improve the resolution and capabilities of modern x-ray techniques such as x-ray microscopy and 3D x-ray diffraction.Keywords
Funding Information
- European Research Council
- Danmarks Grundforskningsfond (DNRF54)
- Danmarks Frie Forskningsfond
This publication has 40 references indexed in Scilit:
- Spatially‐Resolved In‐Situ Structural Study of Organic Electronic Devices with Nanoscale Resolution: The Plasmonic Photovoltaic Case StudyAdvanced Materials, 2013
- Parabolic crossed planar polymeric x-ray lensesJournal of Micromechanics and Microengineering, 2010
- X-ray transfocators: focusing devices based on compound refractive lensesJournal of Synchrotron Radiation, 2010
- Observations of Intergranular Stress Corrosion Cracking in a Grain-Mapped PolycrystalScience, 2008
- Recent advances in X-ray refractive opticsPhysics-Uspekhi, 2008
- Fabrication of vertical mirrors using plasma etch and KOH:IPA polishingJournal of Micromechanics and Microengineering, 2006
- Fabrication of an accurately vertical sidewall for optical switch applications using deep RIE and photoresist spray coatingMicrosystem Technologies, 2005
- X-ray focusing by planar parabolic refractive lenses made of siliconOptics Communications, 2000
- BSM 7: RIE lag in high aspect ratio trench etching of siliconMicroelectronic Engineering, 1997
- Microscopic uniformity in plasma etchingJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1992