Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rizwan Abdul Rahman Rashid has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Comparative Study of Mathematical Methods for Determining Colding’s Constants for Milling of Steels and Experimental Validation

    by Sujan Khadka, Rizwan Abdul Rahman Rashid, John H. Navarro-Devia, Angelo Papageorgiou, Guy Stephens, Sören Hägglund, Suresh Palanisamy

    The optimization of cutting parameters is critical for improving machining efficiency and extending tool life. Colding’s equation is one such tool life prediction equation that can be used to optimize the machining parameters. However, the equation is complex and is often challenging to solve to evaluate its mathematical constants. This study investigates three distinct approaches for calculating the five constants (‘K’, ‘H’, ‘M’, ‘N0’, and ‘L’) in Colding’s equation. These techniques include analytical equation calculation and different curve fitting approaches. The primary objective was to assess the accuracy and effectiveness of these methods in predicting cutting parameters. Two workpiece materials, K1045 and Mild Steel, were used with results indicating that the Python 3.13 programming approach outperformed the other methods, including MATLAB R2024b and analytical calculations, achieving error percentages of 9.08% for K1045 and 5.51% for Mild Steel compared to 12.3% and 35.3% for K1045 and 12.4% and 64.3% for Mild Steel, respectively. Furthermore, the constants ‘N0’, ‘M’, and ‘H’ displayed different values for the two materials, indicating their dependence on workpiece material properties. Moreover, it was evident that Mild Steel exhibited better machinability than K1045 at low MRR (40–80 cm3/min), with up to 55.8% longer tool life, but K1045 performed better at medium and high MRRs, suggesting different machinability behaviours under varying cutting conditions. Overall, the findings demonstrate that Colding’s model, when applied with the appropriate computational method, can accurately optimize cutting parameters for different materials, contributing to more efficient and cost-effective machining processes.

  • Open Access

    Numerical Study of Coolant Flow Phenomena and Heat Transfer at the Cutting-Edge of Twist Drill

    by Farhana Diba, Jamal Naser, Guy Stephens, Rizwan Abdul Rahman Rashid, Suresh Palanisamy

    Cutting tool coolant channels play a pivotal role in machining processes, facilitating the efficient supply of cooling agents to high-stress areas and effective heat dissipation. Achieving optimal cooling at the tool’s cutting-edge is essential for enhancing production processes. Experimental investigations into tribological stress analysis can be limited in accessing complex tool–workpiece contact zones, prompting the use of numerical modelling to explore fluid dynamics and tribology. In this study, the coolant flow dynamics and heat dissipation in drilling operations were comprehensively investigated through computational fluid dynamics (CFD) modelling. Four twist drill models with varying coolant channel arrangements were studied: standard model drill, standard model drill with notch, profile model drill, and profile model drill with notch. Two distinct approaches are applied to the coolant inlet to assess the impact of operating conditions on fluid flow and heat dissipation at the cutting-edge. The findings emphasize that cutting-edge zones have insufficient coolant supply, particularly in modified drill models such as the standard model drill with notch and profile model drills with and without notch. Moreover, enhanced coolant supply at the cutting-edge is achieved under high-pressure inlet conditions. The standard model drill with a notch exhibited exceptional performance in reducing thermal load, facilitating efficient coolant escape to the flute for improved heat dissipation at the cutting-edge. Despite challenges like dead zones in profile models, the standard-with-notch model yielded the most promising results. Further analyses under constant pressure conditions at 40 and 60 bar exhibited enhanced fluid flow rates, particularly at the cutting-edge, leading to improved heat dissipation. The temperature distribution along the cutting-edge and outer corner demonstrated a decrease as the pressure increased. This study underscores the critical role of both coolant channel design and inlet pressure in optimizing coolant flow dynamics and heat transfer during drilling operations. The findings provide valuable insights for designing and enhancing coolant systems in machining processes, emphasizing the significance of not only coolant channel geometry but also inlet pressure for effective heat dissipation and enhanced tool performance.


  • Open Access

    Comparison of Machining Performance of Ti-6Al-4V under Dry and Cryogenic Techniques Based on Tool Wear, Surface Roughness, and Power Consumption

    by Dhvanil Chauhan, Mayur A. Makhesana, Rizwan Abdul Rahman Rashid, Vivek Joshi, Navneet Khanna

    The machining of Ti-6Al-4V alloys is challenging due to their high strength, poor thermal conductivity, and high chemical reactivity. When used in traditional machining, cryogenic coolants can reduce tool wear, thus extending tool life, improving surface finish, and requiring less power with reduced environmental effects. In this context, this study aimed to perform a machinability analysis of the surface roughness, power consumption, tool wear, and specific energy consumption of a Ti-6Al-4V titanium alloy and to comprehend the performance of dry and cryogenic machining in turning operations. A comprehensive analysis of tool wear and specific cutting energy (SCE) under dry and cryogenic machining was conducted. It was found that the machining time under a cryogenic environment was increased by 83% and 39% at 80 and 90 m/min compared to a cutting speed at 100 m/min. The higher cutting speed (100 m/min) in cryogenic environments produced an improved surface finish. Compared to dry machining, the cooling effect of liquid CO2 helped dissipate heat and reduce thermal damage, improving surface finish. The findings revealed that in dry conditions, approximately 5.55%, 26.45%, and 27.61% less power was consumed than in cryogenic conditions at 80, 90, and 100 m/min cutting speeds, respectively. Based on the outcomes of the work, the application of cryogenic cooling can be considered an alternative to dry and flood cooling for improving the machinability of Ti-6Al-4V alloys.


  • Effect of oxygen shielding on the tensile and fatigue performance of 300M repaired through laser-directed energy deposition

    by C. Barr, R.A.R. Rashid, S. Palanisamy, N. Matthews, M. Brandt

    Laser-directed energy deposition (L-DED) is a key enabling technology for the repair of high-value aerospace components, as damaged regions can be removed and replaced with additively deposited material. While L-DED repair improves strength and fatigue performance compared to conventional subtractive techniques, mechanical performance can be limited by process-related defects. To assess the role of oxygen on defect formation, local and chamber-based shielding methods were applied in the repair of 300M high strength steel. Oxidation between layers for locally shielded specimens is confirmed to cause large gas pores which have deleterious effects on fatigue life. Such pores are eliminated for chamber shielded specimens, resulting in an increased ductility of ∼15%, compared to ∼11% with chamber shielding. Despite this, unmelted powder defects are not affected by oxygen content and are found in both chamber- and locally shielded samples, which still have negative consequences for fatigue.


  • Top Cited Papers
    Open Access

    Recent Development of Low-Cost β-Ti Alloys for Biomedical Applications: A Review

    by Galih Senopati, Rizwan Abdul Rahman Rashid, Ika Kartika, Suresh Palanisamy

    The necessity for biomedical components is increasing every year. However, Ti6Al4V, the most widely utilized titanium alloy for biomedical implants are very costly owing to the high price of V alloying element. Furthermore, both alloying elements Al and V, have adverse effects in human body which is not desirable. This review paper highlights significant findings on alloy design using low-cost alloying elements, their processing routes, and their relationship to microstructural, mechanical, and biological properties. Mo, Fe, Mn, Zr, and Cu were identified as low-cost alloying elements and fabrication of titanium alloys with these elements are usually carried out using arc melting, investment casting, powder metallurgy, additive manufacturing, diffusion couple, and thermomechanical processing. Several processing routes can be chosen to obtain optimum properties such as β-phase titanium alloy structure, low elastic modulus, and high strength. Alloy design, post-heat treatment process, and fatigue test for newly developed alloys are research that can be carried out in the future for the development of new titanium materials that are safe for human use and at a more affordable price.


  • Open Access

    Design Optimization and Finite Element Model Validation of LPBF-Printed Lattice-Structured Beams

    by Riyan Rashid, Syed Masood, Dong Ruan, Suresh Palanisamy, Xiaodong Huang, Rizwan Abdul Rahman Rashid

    The laser powder bed fusion (LPBF) method, more commonly known as selective laser melting (SLM), is one of the most common metal additive manufacturing (AM) processes. It is a layer-by-layer fabrication process where each powder layer is melted and fused by a laser beam, which traverses over the designated part geometry cross-section, as defined by a sliced CAD model. The LPBF process is being popularly used to manufacture end products of intricate geometry for various industries, such as the automobile, aerospace, defence, and biomedical industries. In designing parts, the topology optimisation (TO) technique can be effectively employed to optimise the distribution of material throughout the part and obtain the minimum volume/weight without compromising the mechanical performance of the component. This study focusses on the design optimisation and validation of the optimisation approaches used for LPBF-printed AlSi12 metal parts. The mechanical performance of three different topologically optimised lattice beams, viz. 1 × 1, 8 × 3, and 12 × 3, printed using the LPBF process, was investigated. When the beams were tested in bending, it was found that these TO LPBF-printed beams behaved differently when compared to the LPBF-printed solid beam. The 1 × 1 lattice beam performed better than the other two lattice beams due to the lower number of links where premature failure was delayed. The 1 × 1 lattice beam exhibited a load-bearing capacity of 17 ± 2 kN, whereas the 8 × 3 and 12 × 3 lattice beams showed load capacities of 13 ± 1 kN and 10 ± 1 kN, respectively. This mechanical behaviour was modelled and simulated by using a finite element analysis, and it was found that the LPBF-printed material property was affected by the design elements present in the beam. It was also found that each topology-optimised beam fits a different material model when compared to the SLM-printed solid beam. Therefore, a new material model or simulation technique needs to be developed to overcome this issue.


  • Open Access

    Fabrication of Metal/Graphene Composites via Cold Spray Process: State-of-the-Art and the Way Forward

    by Krishnamurthy Prasad, Rizwan Abdul Rahman Rashid, Novana Hutasoit, Suresh Palanisamy, Nishar Hameed

    Cold spray (CS)-fabricated metal–graphene composites have applications in several fields ranging from tribology and corrosion protection to antibacterial applications. However, it is critical from a process perspective to create a viable feedstock, and to this end, there are two widely reported techniques: ball milling and in situ reduction. In this paper, the CS feedstocks prepared via these two methods are compared and contrasted with other miscellaneous techniques in the literature based on their efficacies and the end properties of the fabricated coatings. CS metal–graphene composite coatings are found to display self-healing behaviour and excellent corrosion/wear resistance and mechanical properties, but at this juncture, there is a gap in the literature as far as the CS fabrication of self-standing metal–graphene composite parts is concerned. Several future research avenues are discussed to fully comprehend the printability and functionality of metal/GNP composite cold-sprayed structures.


  • Open Access

    Machinability Analysis of Finish-Turning Operations for Ti6Al4V Tubes Fabricated by Selective Laser Melting

    by Guangxian Li, Rizwan Abdul Rahman Rashid, Songlin Ding, Shoujin Sun, Suresh Palanisamy

    With the advent of additive manufacturing as an advanced technology for the fabrication of titanium components, there is a pressing need to investigate the machinability of parts produced using these techniques compared to components made with conventional wrought methodologies. The motivation for this study was to investigate the influences of machining parameters, especially cutting depth, on the machinability of selective laser melted (SLMed) Ti6Al4V tubes, by analyzing the cutting responses, including cutting forces, machined surface roughness and tool wear at varying cutting parameters. Generally, it can be inferred that specific cutting tools used to machine wrought titanium components can also be used for SLMed parts when carrying out finish-machining operations. Cutting forces in the machining of SLMed workpieces could be up to 70% higher than those in machining the wrought counterparts. In contrast, the tool-wear analysis correspondingly showed larger tool-workpiece engagement area on the tool rake face for tools used for machining wrought parts. Adhesion on the cutting edge in the form of built-up edge and attrition of the tool surface were found to be the two most dominant tool-wear mechanisms, and the oxidation condition of the tool surface in machining SLMed parts was more severe (about 8% and 21%). Vibration analysis was also carried out, but no significant difference between the SLMed and wrought workpieces was observed, and the quality of the machined surface was similar.


  • Open Access

    Antibacterial Efficacy of Cold-Sprayed Copper Coatings against Gram-Positive Staphylococcus aureus and Gram-Negative Escherichia coli

    by Novana Hutasoit, Sanjida Halim Topa, Muhammad Awais Javed, Rizwan Abdul Rahman Rashid, Enzo Palombo, Suresh Palanisamy

    Contact surfaces have been identified as one of the main routes for pathogen transmission. The efficacy to kill both viruses and bacteria on touch surfaces is critical to reducing the rampant spread of harmful pathogens. Copper is one such material that has been traditionally used for its antimicrobial properties. However, most contact/touch surfaces are made up of steel or aluminum due to their structural properties. Therefore, coating high-touch components with copper is one possible solution to improve antibacterial efficacy. In this study, copper was coated on both stainless steel and aluminum substrates using a cold spray process which is a fast and economic coating technique. The coated samples in both as-deposited and heat-treated states were exposed to Escherichia coli and Staphylococcus aureus bacteria, and their efficacy was compared with bulk copper plate. It was found that both bacterial cells responded differently to the different coating properties such as coating thickness, porosity, hardness, surface roughness, oxide content, and galvanic coupling effect. These correlations were elucidated in light of various results obtained from antibacterial and bacterial attachment tests, and materials characterizations of the coatings. It is possible to tailor copper coating characteristics to render them more effective against targeted bacteria.


  • Top Cited Papers
    Open Access

    Review on machining of additively manufactured nickel and titanium alloys

    by Navneet Khanna, Kishan Zadafiya, Tej Patel, Yusuf Kaynak, Rizwan Abdul Rahman Rashid, Ana Vafadar