Effect of oxygen shielding on the tensile and fatigue performance of 300M repaired through laser-directed energy deposition
- 3 November 2023
- journal article
- research article
- Published by Cambridge University Press (CUP) in The Aeronautical Journal
- Vol. 127 (1318) , 2118-2124
Abstract
Laser-directed energy deposition (L-DED) is a key enabling technology for the repair of high-value aerospace components, as damaged regions can be removed and replaced with additively deposited material. While L-DED repair improves strength and fatigue performance compared to conventional subtractive techniques, mechanical performance can be limited by process-related defects. To assess the role of oxygen on defect formation, local and chamber-based shielding methods were applied in the repair of 300M high strength steel. Oxidation between layers for locally shielded specimens is confirmed to cause large gas pores which have deleterious effects on fatigue life. Such pores are eliminated for chamber shielded specimens, resulting in an increased ductility of ∼15%, compared to ∼11% with chamber shielding. Despite this, unmelted powder defects are not affected by oxygen content and are found in both chamber- and locally shielded samples, which still have negative consequences for fatigue.Keywords
This publication has 23 references indexed in Scilit:
- Effect of powder oxygen content on microstructure and mechanical properties of a laser additively-manufactured 12CrNi2 alloy steelMaterials Letters, 2019
- In-situ quench and tempering for microstructure control and enhanced mechanical properties of laser cladded AISI 420 stainless steel powder on 300M steel substratesSurface and Coatings Technology, 2018
- Aerospace applications of laser additive manufacturing2017
- Quantitative fractography and modelling of fatigue crack propagation in high strength AerMet®100 steel repaired with a laser cladding processInternational Journal of Fatigue, 2017
- Fatigue and fracture behavior of laser clad repair of AerMet® 100 ultra-high strength steelInternational Journal of Fatigue, 2016
- Experimental study of porosity reduction in high deposition-rate Laser Material DepositionOptics & Laser Technology, 2015
- Effects of processing parameters on crystal growth and microstructure formation in laser powder deposition of single-crystal superalloyJournal of Materials Processing Technology, 2015
- Effect of laser clad repair on the fatigue behaviour of ultra-high strength AISI 4340 steelMaterials Science and Engineering: A, 2014
- Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causesJournal of Laser Applications, 2011
- Laser Beam Build-Up Welding: Precision in Repair, Surface Cladding, and Direct 3D Metal DepositionJournal of Thermal Spray Technology, 2007