TSTetsuya Suemitsu

Tetsuya Suemitsu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Tetsuya Suemitsu has a total of 291 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Polarization interface charge model to calculate threshold voltage of AlGaN/GaN HEMTs

    by Tetsuya Suemitsu

    A model to calculate the threshold voltage and sheet carrier concentration of AlGaN/GaN high electron mobility transistors more precisely is developed using an advanced polarization charge model based on the dipole nature of polarization. In the conventional model, the polarization charges are assumed to be located exactly at the AlGaN/GaN interface. Instead, a new model assumes the positive polarization charges at the bottom of the AlGaN layer and the negative polarization charges at the top of the GaN layer are located at different positions, with a distance of about a unit-cell height in the vicinity of the AlGaN/GaN interface. The proposed model helps reproduce experimentally obtained sheet carrier concentration for as-grown samples with reasonable material parameters. Unlike the conventional model, it is not necessary to assume unrealistically high barrier height or carrier compensation by deep traps to adjust the carrier concentration to experimental data.

  • Open Access

    Impact of Polarization Charges on Threshold Voltage and Band Offset in AlGaN/GaN Heterostructures

    by Tetsuya Suemitsu, Hiroki Imabayashi, Kenji Shiojima

    The impact of polarization charges on the band profile and the threshold voltage of two‐dimensional electron gas (2DEG) is studied on AlGaN/GaN and GaN/AlGaN/GaN high electron mobility transistor (HEMT) heterostructures. A model incorporating polarization charges with finite thickness model is used to calculate the threshold voltage of HEMTs ( V th ). On AlGaN/GaN heterostructures, the sheet carrier concentrations ( n s ) obtained using the calculated V th agrees well with experimental results reported in literature. On GaN/AlGaN/GaN heterostructures, Schottky diode samples are prepared and V th obtained by capacitance–voltage characterization agrees with that calculated using proposed model with reasonable material parameters. The proposed model also suggests that the band offset at a heterojunction can be modified by the polarization charges.


  • Isolation characteristics of GaN mesas on diamond substrates fabricated using the surface-activated bonding

    by Yosei Sunamoto, Tetsuya Suemitsu, Takehiro Shimaoka, Hideaki Yamada, Jianbo Liang, Naoteru Shigekawa

    The electrical isolation of nitride devices in highly integrated circuits is essential for their normal operation. We fabricated fully isolated GaN mesas on diamond substrates by transferring an epitaxially grown n-GaN layer using the surface-activated bonding and performing mesa etching to expose the underlying diamond surface. The leakage currents between the isolated GaN mesas were comparable to the currents observed between contacts directly formed on diamonds, and markedly smaller than those between fully isolated mesas on semi-insulating 4H-SiC or Si substrates as well as partially isolated mesas on Si or polycrystalline diamond substrates. The activation energy of the current between the on-diamond isolated mesas was larger than that of the current between the on-SiC isolated mesas. These results indicate that isolated nitride mesas on diamonds are promising for realizing nitride devices with excellent isolation properties.


  • Open Access

    Recent advances in the physics of Dirac plasmons in graphene and related 2D materials and their THz device applications

    by Taiichi Otsuji, Victor I. Ryzhii, Stephane A. Boubanga-Tombet, Deepika Yadav, Akira Satou, Tetsuya Suemitsu, Chao Tang, Koichi Tamura, Hirokazu Fukidome, Maki Suemitsu, et al.

    The terahertz (THz) frequency range (0.1–10 THz) bridges the electronic and photonic spectral domains and offers key opportunities for high-speed communication, sensing, and spectroscopy. However, the realization of compact, coherent, and room-temperature THz sources and detectors remains still a long-standing challenge. Recent advances in two-dimensional (2D) materials, hosting graphene-like massless Dirac fermions, have opened some new paths toward overcoming this limitation. This paper reviews recent advances in the physics of Dirac plasmons in graphene and related 2D heterostructure materials and their THz device applications. It first outlines the fundamentals of 2D plasmon hydrodynamics, nonlinearities, and current-driven instabilities, including Dyakonov–Shur Ryzhii–Satou–Shur, and Cherenkov-type mechanisms. A new mechanism, Coulomb drag instability, recently discovered by the authors, is theoretically shown to provide the largest plasmonic gain among these mechanisms, offering a new route to efficient THz amplification and lasing. Its experimental verification is currently in progress. The review also discusses graphene-based plasmonic lasers, amplifiers, and detectors, and recent developments in graphene/black-arsenic–phosphorus heterostructures that enable band-structure and plasmonic engineering. Finally, topological-insulator-based heterostructures are introduced as promising material systems. These advances demonstrate that Dirac plasmon physics provides a robust foundation for next-generation THz device technology.


  • (Invited) Schottky Barrier Height and Band Offset in Nitride Semiconductors: Impact of Polarization Charges

    by Tetsuya Suemitsu

    Polarization charges induced in wurtzite III-Nitride crystals make this material system unique by realizing a high concentration of two-dimensional electron gas (2DEG) in heterojunctions without impurity doping. In GaN, the polarization charges induced on c-plane surface are as dense as the charges by ionized impurities with a quite high sheet concentration of 2.12 x 10 13 cm -2 . Such a large amount of charge should affect the electrostatic potential in the system under consideration. Although in general the polarization charges are considered to be located exactly at the surface (or interface) of a crystal (or heterostructure), we propose a model that the polarization charges distribute in a thin layer, as thin as a height of a unit cell, at the surface (or interface) [1]. This model enables to explain the experimental results revealing that the Schottky barrier height of Ga-polar GaN is about 0.2 V higher than that of N-polar GaN. A significant band bending in the thin layer where the polarization charges distribute pushes the conduction band energy upward (downward) beneath the surface of the Ga-polar (N-polar) GaN depending on the sign of the polarization charges. As a result, the barrier height increases (decreases) in the Ga-polar (N-polar) GaN, and the calculation result suggests that the thickness of the layer where the polarization charges distribute is about 5 Å to adjust to the 0.2 V difference in the barrier heights between the two polarities. The thickness of 5 Å invokes the height of the unit cell along c-axis of GaN and makes sense if we consider that the dipoles in unit cells are the origin of the polarization charges. Next, this polarization model is applied to heterojunctions. For a Ga-polar AlGaN/GaN heterostructure, for example, the conventional model assumes that the charges with a sum of the positive polarization charges at the bottom of the AlGaN layer and the negative polarization charges at the top of the GaN layer exist exactly at the heterojunction [2]. The proposed model assumes that the positive polarization charges of AlGaN distribute in a thin layer above the heterojunction, and the negative polarization charges of GaN distribute in a thin layer below the heterojunction. The calculated band profile exhibits a shrink of the band offset at the AlGaN/GaN heterojunction caused by a significant band bending in both thin layers with a large concentration of polarization charges. The shrunken band offset helps obtain a calculated carrier concentration agreeing with experimental results while the conventional model tends to overestimate the carrier concentration. In summary, the impact of the polarization charges on the Schottky barrier height and the band offset at a heterojunction of III-N material systems are revealed by the proposed model assuming the surface (or interface) polarization charges distribute in a thin layer with a unit cell height. The proposed model helps design heterostructures for high electron mobility transistors with a target threshold voltage and carrier concentration. This work is partly supported by JSPS KAKENHI #23K17322 and #24H00425. [1] T. Suemitsu and I. Makabe, Phys. Status Solidi B257 , 1900528 (2020). [2] T. Suemitsu, Compound Semiconductor Week 2024, Lund, Sweden, P16 (2024).

  • Open Access

    Fast and sensitive terahertz detection with a current-driven epitaxial-graphene asymmetric dual-grating-gate field-effect transistor structure

    by Koichi Tamura, Chao Tang, Daichi Ogiura, Kento Suwa, Hirokazu Fukidome, Yuma Takida, Hiroaki Minamide, Tetsuya Suemitsu, Taiichi Otsuji, Akira Satou

    We designed and fabricated an epitaxial-graphene-channel field-effect transistor (EG-FET) featuring an asymmetric dual-grating-gate (ADGG) structure working as a current-driven terahertz detector and experimentally demonstrated a 10 ps-order fast response time and a high responsivity of 0.3 mA/W to 0.95 Terahertz (THz) radiation incidence at room temperature. The ADGG and drain–source bias dependencies of the measured photoresponse showed a clear transition between plasmonic detection under periodic electron density modulation conditions with depleted regions and photothermoelectric (PTE) detection under entirely highly doped conditions without depleted regions. We identified the PTE detection that we observed as a new type of unipolar mechanism in which only electrons or holes contribute to rectifying THz radiation under current-driven conditions. These two detection mechanisms coexisted over a certain wide transcendent range of the applied bias voltages. The temporal photoresponses of the plasmonic and PTE detections were clearly shown to be comparably fast on the order of 10 ps, whereas the maximal photoresponsivity of the PTE detection was almost twice as high as that of the plasmonic detection under applied bias conditions. These results suggest that the ADGG-EG-FET THz detector will be promising for use in 6G- and 7G-class high-speed wireless communication systems.


  • Open Access

    Graphene‐based plasmonic metamaterial for terahertz laser transistors

    by Taiichi Otsuji, Stephane Albon Boubanga‐Tombet, Akira Satou, Deepika Yadav, Hirokazu Fukidome, Takayuki Watanabe, Tetsuya Suemitsu, Alexander A. Dubinov, Vyacheslav V. Popov, Wojciech Knap, et al.

    This paper reviews recent advances in the research and development of graphene‐based plasmonic metamaterials for terahertz (THz) laser transistors. The authors’ theoretical discovery on THz laser transistors in 2007 was realized as a distributed‐feedback dual‐gate graphene‐channel field‐effect transistor (DFB‐DG‐GFET) in 2018, demonstrating ∼0.1 µW single‐mode emission at 5.2 THz and ∼80 µW amplified spontaneous 1–7.6 THz emission at 100 K. To realize room‐temperature, dry‐cell‐battery operating intense THz lasing with fast direct modulation, various approaches based on graphene plasmonic metamaterials are investigated and introduced as real device implementations, including (i) replacement of the laser photonic cavity with plasmonic cavity enormously improving the THz photon field confinement with larger gain overlapping, (ii) introduction of THz amplification of stimulated emission via current‐driven graphene Dirac plasmons (GDPs), and (iii) controlling the parity and time‐reversal symmetry of GDPs enabling ultrafast direct gain‐switch modulation. Possible real device structures and design constraints are discussed and addressed toward coherent light sources applicable to future 6G‐ and 7G‐class THz wireless communication systems.


  • Open Access

    Reverse bias annealing effects in N-polar GaN/AlGaN metal-insulator-semiconductor high electron mobility transistors

    by Kiattiwut Prasertsuk, Tetsuya Suemitsu, Takashi Matsuoka

    Reverse bias annealing (RBA) is applied to N-polar GaN high electron mobility transistors (HEMTs) to improve the quality of the gate stack interface. As demonstrated for Ga-polar HEMTs, RBA improves the stability of the gate stack interface. However, the decrease in the maximum drain current density is observed as a unique phenomenon for the N-polar HEMTs. The calculation of the band profile suggests that in the N-polar HEMTs the electrons injected from the gate electrode by the reverse bias accumulate at the gate stack interface in the extrinsic gate region. This promotes the electron trapping in the gate stack, which results in an increase in the source access resistance by the virtual gate phenomenon. In the Ga-polar HEMTs, the electrons tend to accumulate at the AlGaN/GaN interface rather than the gate stack interface, which gives less chance of the virtual gate phenomenon.


  • Unitraveling-Carrier-Photodiode-Integrated High-Electron-Mobility Transistor for Photonic Double-Mixing

    by Akira Satou, Yuya Omori, Kazuki Nishimura, Tomotaka Hosotani, Katsumi Iwatsuki, Tetsuya Suemitsu, Taiichi Otsuji

    We newly propose and experimentally investigate an InGaAs-channel high-electron-mobility transistor integrated with a unitraveling-carrier photodiode (UTC-PD) structure on its source side for an efficient optical-to-wireless carrier frequency downconversion utilizing its photonic double-mixing functionality. It is demonstrated that the double-mixing conversion gain is significantly enhanced by 20 dB compared with a standard HEMT, owing to the integration of the UTC-PD structure. The device operation principle expected from the device structure is confirmed through measured DC characteristics and photomixing/double-mixing characteristics in the millimeter-wave region. The feasibility of the device for practical use in future optical-wireless convergence networks is addressed.


  • Open Access

    Effective Schottky Barrier Height Model for N‐Polar and Ga‐Polar GaN by Polarization‐Induced Surface Charges with Finite Thickness

    by Tetsuya Suemitsu, Isao Makabe

    The nitrogen‐polar GaN material system is a promising candidate for high‐frequency applications, such as those in the millimeter‐wave range. Schottky barrier height is one of fundamental parameters necessary for device applications of N‐polar GaN. Herein, vertical Schottky diodes for both N‐polar and Ga‐polar GaN are prepared, and it is found through experiments that the barrier height of N‐polar GaN is smaller than that of Ga‐polar GaN by 0.21 V. This difference in the barrier height stems from the polarization‐induced surface charge layer of a few angstroms thickness under the surface. Numerical calculation of band profiles suggests that a significant band bending caused by the large amount of polarization charges pushes the conduction band energy downward (upward) in the N‐polar (Ga‐polar) surface depending on the sign of the polarization charges, which results in two different effective Schottky barrier heights. This difference is explained by assuming the polarization‐charge layer thickness of about 5 Å. A simple analytical model to estimate the difference in barrier heights between the two polarities is also proposed.