Adeboye Stephen Oyeniran
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adeboye Stephen Oyeniran has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Raimund Ubar
Tallinn University of Technology
14 shared publications Siavoosh Payandeh Azad
Tallinn University of Technology, Estonia
5 shared publications- Anton Tsertov
Testonica Lab, Tallinn, Estonia
2 shared publications Artjom Jasnetski
Tallinn University of Technology, Tallinn, Estonia
2 shared publicationsJaan Raik
Tallinn University of Technology
2 shared publications- Jaan Raik
Department of Computer Systems, Tallinn University of Technology, Tallinn, Estonia
2 shared publications
Latest Publications
- 1 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Environment for Innovative University Research Training in the Field of Digital Test
In this paper we target three methods and goals for teaching research, called active learning, authentic learning by doing and reflexing learning. We discuss the student-centred learning for research in the field of computer engineering, particularly the design and test of digital systems such as microprocessors. The more complex electronics systems are getting, the more important is testing. Today, design and test are no longer separate issues. The emphasis on the quality of products requires testing to be considered early in the design process. However, most VLSI and system designers know little about testing. This reflects today’s university education, where design is the main teaching issue, whereas testing is covered only superficially. Therefore, the focus in this paper is set on teaching and learning approaches of the research problems of reliability and testing of digital systems, motivated by today’s trends in the computer industry, and by the need of industry for educated young engineers in line with these trends. The emerged paradigm of testing systems, such as microprocessors or controllers is software based self-test (SBST). However, today’s solutions in this field are insufficient, and there is a big need for research to improve test quality, especially in cases where no information about implementation is given. To fill up the gap between university teaching and industry needs in the test field, we have developed a framework for supporting research oriented training of computer engineering students in hardware design and test, which consists of both commercial tools and in-house advanced tools for test generation. To enhance thorough understanding and creativity of students, we have created different task variations based on the framework, which could stand as a good ground for lab research.
- 1 September 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Environment for Innovative University Research Training in the Field of Digital Test
In this paper we target three methods and goals for teaching research, called active learning, authentic learning by doing and reflexing learning. We discuss the student-centred learning for research in the field of computer engineering, particularly the design and test of digital systems such as microprocessors. The more complex electronics systems are getting, the more important is testing. Today, design and test are no longer separate issues. The emphasis on the quality of products requires testing to be considered early in the design process. However, most VLSI and system designers know little about testing. This reflects today’s university education, where design is the main teaching issue, whereas testing is covered only superficially. Therefore, the focus in this paper is set on teaching and learning approaches of the research problems of reliability and testing of digital systems, motivated by today’s trends in the computer industry, and by the need of industry for educated young engineers in line with these trends. The emerged paradigm of testing systems, such as microprocessors or controllers is software based self-test (SBST). However, today’s solutions in this field are insufficient, and there is a big need for research to improve test quality, especially in cases where no information about implementation is given. To fill up the gap between university teaching and industry needs in the test field, we have developed a framework for supporting research oriented training of computer engineering students in hardware design and test, which consists of both commercial tools and in-house advanced tools for test generation. To enhance thorough understanding and creativity of students, we have created different task variations based on the framework, which could stand as a good ground for lab research.
- 22 July 2020
- Published by Springer Nature
- p. 21-44
On Test Generation for Microprocessors for Extended Class of Functional Faults
- 22 July 2020
- Published by Springer Nature
- p. 21-44
On Test Generation for Microprocessors for Extended Class of Functional Faults
- 1 February 2020
- Published by Springer Nature in Journal of Electronic Testing
- Vol. 36 (1) , 87-103
High-Level Implementation-Independent Functional Software-Based Self-Test for RISC Processors
- 1 February 2020
- Published by Springer Nature in Journal of Electronic Testing
- Vol. 36 (1) , 87-103
High-Level Implementation-Independent Functional Software-Based Self-Test for RISC Processors
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Minimization of the High-Level Fault Model for Microprocessor Control Parts
The paper presents a method for representing the instruction set truth tables of microprocessors with High-Level Decision Diagrams (HLDD). A behavior level fault model is defined for the microprocessor control parts on the basis of instruction level truth tables (TT). Two methods are proposed for creating HLDDs from TTs with minimization of the edges on graphs: greedy algorithm, and branch and bound algorithm (B&B). A simple and fast computable lower bound is proposed to be used for pruning the search space of the B&B algorithm. Experimental data of using the fault model for several microprocessors and comparison data are provided to show the efficiency of the proposed high-level fault model over the gate-level Stuck-at-Fault (SAF) model.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Minimization of the High-Level Fault Model for Microprocessor Control Parts
The paper presents a method for representing the instruction set truth tables of microprocessors with High-Level Decision Diagrams (HLDD). A behavior level fault model is defined for the microprocessor control parts on the basis of instruction level truth tables (TT). Two methods are proposed for creating HLDDs from TTs with minimization of the edges on graphs: greedy algorithm, and branch and bound algorithm (B&B). A simple and fast computable lower bound is proposed to be used for pruning the search space of the B&B algorithm. Experimental data of using the fault model for several microprocessors and comparison data are provided to show the efficiency of the proposed high-level fault model over the gate-level Stuck-at-Fault (SAF) model.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Combined pseudo-exhaustive and deterministic testing of array multipliers
The paper presents a new method for bit-parallel testing of array multipliers using a novel approach of data-controlled segmentation of the circuit to transform the task of testing 2-dimensional arrays to the task of testing a set of 1-dimensional arrays. Pseudo-exhaustive and deterministic testing are combined to achieve high coverage of a broad class of gate-level faults. The well-structured test sequences can be implemented both, as a software or hardware based BIST. Experiments demonstrate the advantages of the new approach compared with state-of-the-art methods.
- 1 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Combined pseudo-exhaustive and deterministic testing of array multipliers
The paper presents a new method for bit-parallel testing of array multipliers using a novel approach of data-controlled segmentation of the circuit to transform the task of testing 2-dimensional arrays to the task of testing a set of 1-dimensional arrays. Pseudo-exhaustive and deterministic testing are combined to achieve high coverage of a broad class of gate-level faults. The well-structured test sequences can be implemented both, as a software or hardware based BIST. Experiments demonstrate the advantages of the new approach compared with state-of-the-art methods.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 21-26
Replication-Based Deterministic Testing of 2-Dimensional Arrays with Highly Interrelated Cells
In this paper a new method for parallel testing of 2- dimensional arrays is proposed, where test generation is combined with simultaneous circuit partitioning driven by generated test data. The generated tests combine pseudo-exhaustive patterns with deterministic test sequences and are well structured to allow high rate of replication. The test data have a compact structure to be easily unfolded, and they are suitable for implementation as both, software or hardware based BIST. The proposed method targets a large class of sequential (stuck- open and delay) faults and combinational multiple faults. The feasibility of the method is demonstrated by generated test sequences and simulated BIST solutions for array multipliers.
- 1 April 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 21-26
Replication-Based Deterministic Testing of 2-Dimensional Arrays with Highly Interrelated Cells
In this paper a new method for parallel testing of 2- dimensional arrays is proposed, where test generation is combined with simultaneous circuit partitioning driven by generated test data. The generated tests combine pseudo-exhaustive patterns with deterministic test sequences and are well structured to allow high rate of replication. The test data have a compact structure to be easily unfolded, and they are suitable for implementation as both, software or hardware based BIST. The proposed method targets a large class of sequential (stuck- open and delay) faults and combinational multiple faults. The feasibility of the method is demonstrated by generated test sequences and simulated BIST solutions for array multipliers.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Parallel Pseudo-Exhaustive Testing of Array Multipliers with Data-Controlled Segmentation
This paper presents a new method for pseudo-exhaustive testing of standard array multipliers using a novel approach of data-controlled segmentation of the circuit. The method covers both combinational and sequential fault classes. Differently from previous papers, the proposed separate cell-testing approach targets multiple faults in different cells and avoids fault masking. The method is also applicable to other multiplier architectures like Booth and MiniMIPS with high stuck-at fault (SAF) coverage. The regular structure of the test allows efficient implementation of the method as both software based self-test (SBST) and hardware-based BIST.
- 1 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Parallel Pseudo-Exhaustive Testing of Array Multipliers with Data-Controlled Segmentation
This paper presents a new method for pseudo-exhaustive testing of standard array multipliers using a novel approach of data-controlled segmentation of the circuit. The method covers both combinational and sequential fault classes. Differently from previous papers, the proposed separate cell-testing approach targets multiple faults in different cells and avoids fault masking. The method is also applicable to other multiplier architectures like Booth and MiniMIPS with high stuck-at fault (SAF) coverage. The regular structure of the test allows efficient implementation of the method as both software based self-test (SBST) and hardware-based BIST.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
High-level test generation for processing elements in many-core systems
The advent of many-core system-on-chips (SoC) will involve new scalable hardware/software mechanisms that can efficiently utilize the abundance of interconnected processing elements found in these SoCs. These trends will have a great impact on the strategies for testing the systems and improving their reliability by exploiting system's re-configurability to achieve graceful degradation of system's performance. We propose a strategy of Software-Based Self-Test (SBST) to be used for testing of processing elements in many-core systems with the goal to increase fault coverage and structuring the test routines in a way which makes test-data delivery in many-core systems more efficient. A new high-level fault model is introduced, which covers a broad class of gate-level Stuck-at-Faults (SAF), conditional SAF, and bridging faults of any multiplicity in processor control paths. Two algorithms for high-level simulation-based test generation for the control path and a bit-wise pseudo-exhaustive test approach for data path are proposed. No implementation details are needed for test data generation. A novel method for proving the redundancy of high-level functional faults is presented, which allows for precise evaluation of fault coverage.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
High-level test generation for processing elements in many-core systems
The advent of many-core system-on-chips (SoC) will involve new scalable hardware/software mechanisms that can efficiently utilize the abundance of interconnected processing elements found in these SoCs. These trends will have a great impact on the strategies for testing the systems and improving their reliability by exploiting system's re-configurability to achieve graceful degradation of system's performance. We propose a strategy of Software-Based Self-Test (SBST) to be used for testing of processing elements in many-core systems with the goal to increase fault coverage and structuring the test routines in a way which makes test-data delivery in many-core systems more efficient. A new high-level fault model is introduced, which covers a broad class of gate-level Stuck-at-Faults (SAF), conditional SAF, and bridging faults of any multiplicity in processor control paths. Two algorithms for high-level simulation-based test generation for the control path and a bit-wise pseudo-exhaustive test approach for data path are proposed. No implementation details are needed for test data generation. A novel method for proving the redundancy of high-level functional faults is presented, which allows for precise evaluation of fault coverage.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
High-level test data generation for software-based self-test in microprocessors
A new high-level fault model and test generation method for software-based self-test in microprocessors (MP) is proposed and investigated. The model is derived directly from the instruction set of the given MP. A deterministic high-level method and algorithm for test data generation based on this fault model are proposed for the control part of MP. For the data path of MP, pseudo-exhaustive test generation method is proposed, which provides high gate-level SAF coverage. The methods proposed are fully high-level approaches, and no gate-level ATPG is needed. The capability of the new approach to achieving high gate-level fault coverage is demonstrated by low-level SAF simulation.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
High-level test data generation for software-based self-test in microprocessors
A new high-level fault model and test generation method for software-based self-test in microprocessors (MP) is proposed and investigated. The model is derived directly from the instruction set of the given MP. A deterministic high-level method and algorithm for test data generation based on this fault model are proposed for the control part of MP. For the data path of MP, pseudo-exhaustive test generation method is proposed, which provides high gate-level SAF coverage. The methods proposed are fully high-level approaches, and no gate-level ATPG is needed. The capability of the new approach to achieving high gate-level fault coverage is demonstrated by low-level SAF simulation.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 48-53
From online fault detection to fault management in Network-on-Chips: A ground-up approach
Due to the ongoing miniaturization of silicon technology beyond the sub-micron domain and the trend of integrating ever more components on a single chip, the Network-on-Chip (NoC) paradigm has emerged to address the scalability and performance shortcomings of bus-based interconnects. As the feature size shrinks, the system gets much more susceptible to faults caused by wear-out and environmental effects. Thus, in order to increase the reliability, creates the need for having mechanisms embedded into such a system that could detect and manage the faults in run-time. In this paper, a ground-up approach from fault detection to fault management for such a NoC-based system on chip is proposed that utilizes both local fault management for fast reaction to faults and a global fault management mechanisms for triggering a large-scale reconfiguration of the NoC. Also, detailed description of strategies for fault detection, localization, classification and propagation to a global fault management unit are provided and methods for local fault management are elaborated.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 48-53
From online fault detection to fault management in Network-on-Chips: A ground-up approach
Due to the ongoing miniaturization of silicon technology beyond the sub-micron domain and the trend of integrating ever more components on a single chip, the Network-on-Chip (NoC) paradigm has emerged to address the scalability and performance shortcomings of bus-based interconnects. As the feature size shrinks, the system gets much more susceptible to faults caused by wear-out and environmental effects. Thus, in order to increase the reliability, creates the need for having mechanisms embedded into such a system that could detect and manage the faults in run-time. In this paper, a ground-up approach from fault detection to fault management for such a NoC-based system on chip is proposed that utilizes both local fault management for fast reaction to faults and a global fault management mechanisms for triggering a large-scale reconfiguration of the NoC. Also, detailed description of strategies for fault detection, localization, classification and propagation to a global fault management unit are provided and methods for local fault management are elaborated.