Anton Tsertov
Research Subjects
Anton Tsertov has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Raimund Ubar
Tallinn University of Technology
15 shared publications - Artur Jutman
Tallinn University of Technology
11 shared publications Artjom Jasnetski
8 shared publications- Sergei Devadze
Testonica Lab, Tallinn, Estonia
6 shared publications A. Tsepurov
Department of Computer Engineering, Tallinn University of Technology, Raja 15, 12618, Estonia
2 shared publications- Adeboye Stephen Oyeniran
Tallinn University of Technology, Estonia
2 shared publications
Latest Publications
- Open Access
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Post-Silicon Validation of IEEE 1687 Reconfigurable Scan Networks
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Open AccessPost-Silicon Validation of IEEE 1687 Reconfigurable Scan Networks
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-9
IEEE 1687 Compliant Ecosystem for Embedded Instrumentation Access and In-Field Health Monitoring
The ongoing research in the adjoin fields of failure resilience, health monitoring, fault management has also shown a widening interest in IEEE 1687 Std. applications. In this paper we unveil IEEE 1687 compliant ecosystem that covers almost every aspect related to IJTAG compliant RSNs. With the help of ecosystem tools we present an extension to the standard network reconfiguration modules to illustrate the capabilities of asynchronous error detection schemes in IJTAG networks. In addition, in this paper as an example application of the Ecosystems' SW support we present an automatically generated tests for the suite of IEEE 1687 benchmark networks in Procedural Description Language (PDL).
- 1 September 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-9
IEEE 1687 Compliant Ecosystem for Embedded Instrumentation Access and In-Field Health Monitoring
The ongoing research in the adjoin fields of failure resilience, health monitoring, fault management has also shown a widening interest in IEEE 1687 Std. applications. In this paper we unveil IEEE 1687 compliant ecosystem that covers almost every aspect related to IJTAG compliant RSNs. With the help of ecosystem tools we present an extension to the standard network reconfiguration modules to illustrate the capabilities of asynchronous error detection schemes in IJTAG networks. In addition, in this paper as an example application of the Ecosystems' SW support we present an automatically generated tests for the suite of IEEE 1687 benchmark networks in Procedural Description Language (PDL).
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
High-level test data generation for software-based self-test in microprocessors
A new high-level fault model and test generation method for software-based self-test in microprocessors (MP) is proposed and investigated. The model is derived directly from the instruction set of the given MP. A deterministic high-level method and algorithm for test data generation based on this fault model are proposed for the control part of MP. For the data path of MP, pseudo-exhaustive test generation method is proposed, which provides high gate-level SAF coverage. The methods proposed are fully high-level approaches, and no gate-level ATPG is needed. The capability of the new approach to achieving high gate-level fault coverage is demonstrated by low-level SAF simulation.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
High-level test data generation for software-based self-test in microprocessors
A new high-level fault model and test generation method for software-based self-test in microprocessors (MP) is proposed and investigated. The model is derived directly from the instruction set of the given MP. A deterministic high-level method and algorithm for test data generation based on this fault model are proposed for the control part of MP. For the data path of MP, pseudo-exhaustive test generation method is proposed, which provides high gate-level SAF coverage. The methods proposed are fully high-level approaches, and no gate-level ATPG is needed. The capability of the new approach to achieving high gate-level fault coverage is demonstrated by low-level SAF simulation.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
A suite of IEEE 1687 benchmark networks
The saturation of the IJTAG concept and its approval as the IEEE 1687 standard in 2014 has generated a wave of research activities and created demand for a set of appropriate and challenging benchmarks. This paper presents such a set developed by an industrial and academic consortium and constructed in a way that facilitates objective comparison of experimental results across research groups as well as represents challenging network examples exhaustively utilizing features and constructs defined by the standard. The suite is arranged in four comprehensive categories, each having its particular purpose and composition principles, as described in the paper. We have also made an analysis of limitations of previous popular and ad-hoc benchmark sets as these limitations majorly motivated our current action. The new public-domain benchmarks are distributed together with source files and documentation through the dedicated web site. Some of the previous research results on IEEE 1687 have been reapplied on the new benchmarks set, thus creating an important initial reference point for the research community.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
A suite of IEEE 1687 benchmark networks
The saturation of the IJTAG concept and its approval as the IEEE 1687 standard in 2014 has generated a wave of research activities and created demand for a set of appropriate and challenging benchmarks. This paper presents such a set developed by an industrial and academic consortium and constructed in a way that facilitates objective comparison of experimental results across research groups as well as represents challenging network examples exhaustively utilizing features and constructs defined by the standard. The suite is arranged in four comprehensive categories, each having its particular purpose and composition principles, as described in the paper. We have also made an analysis of limitations of previous popular and ad-hoc benchmark sets as these limitations majorly motivated our current action. The new public-domain benchmarks are distributed together with source files and documentation through the dedicated web site. Some of the previous research results on IEEE 1687 have been reapplied on the new benchmarks set, thus creating an important initial reference point for the research community.
- 1 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 177
On automatic software-based self-test program generation based on high-level decision diagrams
Software-Based Self-Testing (SBST) is a well-known non-intrusive method for testing microprocessors. This paper presents an approach for automatic SBST program generation, based on the methodology of using High-Level Decision Diagrams (HLDD) for modeling microprocessors and faults. The novelty of this approach is that Instruction Set Architecture (ISA) of the processor is the only needed input data for the automated test program generator.
- 1 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 177
On automatic software-based self-test program generation based on high-level decision diagrams
Software-Based Self-Testing (SBST) is a well-known non-intrusive method for testing microprocessors. This paper presents an approach for automatic SBST program generation, based on the methodology of using High-Level Decision Diagrams (HLDD) for modeling microprocessors and faults. The novelty of this approach is that Instruction Set Architecture (ISA) of the processor is the only needed input data for the automated test program generator.
- 1 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
FPGA-controlled PCBA power-on self-test using processor's debug features
When facing in-field board test, the functional approach plays an important role. Often, it corresponds to forcing the processor to execute a test program (which could be an application one), observing the produced results (e.g., by looking at the results written in the memory at the end of the test program execution). However, the fault coverage that can be achieved in this way is often difficult to compute, and limited by the reduced observability. In this paper we propose to use the debug features provided by many processors to enhance the observability, and hence the achieved fault coverage. In the proposed architecture we monitor on-the-fly during the test program execution the information accessible through the debug port using an ad hoc module mapped on an FPGA which is assumed to exist close to the processor. We provide experimental results showing the feasibility and cost of the approach, and demonstrate that it can provide a significant increase in the achieved fault coverage with respect to the popular solution of observing the final content of the memory.
- 1 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
FPGA-controlled PCBA power-on self-test using processor's debug features
When facing in-field board test, the functional approach plays an important role. Often, it corresponds to forcing the processor to execute a test program (which could be an application one), observing the produced results (e.g., by looking at the results written in the memory at the end of the test program execution). However, the fault coverage that can be achieved in this way is often difficult to compute, and limited by the reduced observability. In this paper we propose to use the debug features provided by many processors to enhance the observability, and hence the achieved fault coverage. In the proposed architecture we monitor on-the-fly during the test program execution the information accessible through the debug port using an ad hoc module mapped on an FPGA which is assumed to exist close to the processor. We provide experimental results showing the feasibility and cost of the approach, and demonstrate that it can provide a significant increase in the achieved fault coverage with respect to the popular solution of observing the final content of the memory.
- 1 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
High-level modeling and testing of multiple control faults in digital systems
A new method for high level fault modeling to improve the test generation for the control parts of digital systems was proposed. We developed a new high-level functional fault model based on High-Level Decision Diagrams (HLDD). It allows uniform handling of possible defects in different control functions related to instruction decoding, data addressing, and data manipulation. It was shown how the proposed high-level fault model can be mapped on the low-level faults of a joint class of stuck-at faults (SAF), conditional SAF and bridging faults. We proposed uniform procedures for high-level fault activation as a graph traversing procedure on HLDDs related to selection of control signals, and for fault propagation as a task of solving data constraints without using implementation details. Experimental results demonstrated that combining both, high-level control fault reasoning and low-level test generation for data part of a system can help to achieve higher fault coverage and detection of redundant faults than using low-level test generation approach alone.
- 1 April 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
High-level modeling and testing of multiple control faults in digital systems
A new method for high level fault modeling to improve the test generation for the control parts of digital systems was proposed. We developed a new high-level functional fault model based on High-Level Decision Diagrams (HLDD). It allows uniform handling of possible defects in different control functions related to instruction decoding, data addressing, and data manipulation. It was shown how the proposed high-level fault model can be mapped on the low-level faults of a joint class of stuck-at faults (SAF), conditional SAF and bridging faults. We proposed uniform procedures for high-level fault activation as a graph traversing procedure on HLDDs related to selection of control signals, and for fault propagation as a task of solving data constraints without using implementation details. Experimental results demonstrated that combining both, high-level control fault reasoning and low-level test generation for data part of a system can help to achieve higher fault coverage and detection of redundant faults than using low-level test generation approach alone.
- 1 April 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 251-254
New Fault Models and Self-Test Generation for Microprocessors Using High-Level Decision Diagrams
The paper presents a novel approach to high-level fault modeling and test generation for microprocessors using High-Level Decision Diagrams (HLDD). A general frame-work and novel techniques for automated software-based self-test program generation are discussed. On this basis new previously not published test quality improvement capabilities of the approach are high-lighted and explained. Based on the high level fault model defined for HLDDs a novel class of hard-to-test faults, called "unintended actions", is proposed. In addition, the mechanisms for reducing the risk of fault masking is explained. The experimental results show the superiority of the new method by achieving a higher quality of tests with shorter length compared to the previous results.
- 1 April 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 251-254
New Fault Models and Self-Test Generation for Microprocessors Using High-Level Decision Diagrams
The paper presents a novel approach to high-level fault modeling and test generation for microprocessors using High-Level Decision Diagrams (HLDD). A general frame-work and novel techniques for automated software-based self-test program generation are discussed. On this basis new previously not published test quality improvement capabilities of the approach are high-lighted and explained. Based on the high level fault model defined for HLDDs a novel class of hard-to-test faults, called "unintended actions", is proposed. In addition, the mechanisms for reducing the risk of fault masking is explained. The experimental results show the superiority of the new method by achieving a higher quality of tests with shorter length compared to the previous results.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 80-83
Laboratory framework TEAM for investigating the dependability issues of microprocessor systems
We propose a laboratory research and student training oriented framework consisting of Test Evaluation Automated Means (TEAM) as a set of tools for evaluating the quality of test programs for microprocessors and systems. TEAM enables students to learn and analyze the dependability issues of microprocessor systems, to create their own designs and develop test programs, to analyze the quality of testing, and to make decisions about improving the testability of systems. The tool set in TEAM is mostly open and consists of the assembly level test converter, register transfer level test program simulator, global test converter into local test sequences for modules of the system, and gate-level fault simulator. The general ideas of hands-on laboratory training supported by TEAM are outlined. The research tasks of test program generation can be set up in a way that enables a competition between students, and as a consequence, motivates them to better understand the problems of testing of complex systems and their dependability.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 80-83
Laboratory framework TEAM for investigating the dependability issues of microprocessor systems
We propose a laboratory research and student training oriented framework consisting of Test Evaluation Automated Means (TEAM) as a set of tools for evaluating the quality of test programs for microprocessors and systems. TEAM enables students to learn and analyze the dependability issues of microprocessor systems, to create their own designs and develop test programs, to analyze the quality of testing, and to make decisions about improving the testability of systems. The tool set in TEAM is mostly open and consists of the assembly level test converter, register transfer level test program simulator, global test converter into local test sequences for modules of the system, and gate-level fault simulator. The general ideas of hands-on laboratory training supported by TEAM are outlined. The research tasks of test program generation can be set up in a way that enables a competition between students, and as a consequence, motivates them to better understand the problems of testing of complex systems and their dependability.