WLWen Lien

Wen Lien

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Wen Lien has a total of 81 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Comparative evaluation of mesenchymal stromal cell growth and osteogenic differentiation on a shape memory polymer scaffold

    by Jessica M. Stukel Shah, Bridney Lundquist, Joseph Macaitis, Michaela R. Pfau‐Cloud, Felipe O. Beltran, Melissa A. Grunlan, Wen Lien, Heuy‐Ching Wang, Alexander J. Burdette

    Trauma‐induced, critical‐size bone defects pose a clinical challenge to heal. Albeit autografts are the standard‐of‐care, they are limited by their inability to be shaped to various defect geometries and often incur donor site complications. Herein, the combination of a “self‐fitting” shape memory polymer (SMP) scaffold and seeded mesenchymal stromal cells (MSCs) was investigated as an alternative. The porous SMP scaffold, prepared from poly(ε‐caprolactone) diacrylate (PCL‐DA) and coated with polydopamine, provided conformal shaping and cell adhesion. MSCs from five tissues, amniotic (AMSCs), chorionic tissue (CHSCs), umbilical cord (UCSCs), adipose (ADSCs), and bone marrow (BMSCs) were evaluated for viability, density, and osteogenic differentiation on the SMP scaffold. BMSCs exhibited the fastest increase in cell density by day 3, but after day 10, CHSCs, UCSCs, and ADSCs approached similar cell density. BMSCs also showed the greatest calcification among the cell types, followed closely by ADSCs, CHSCs and AMSCs. Alkaline phosphatase (ALP) activity peaked at day 7 for AMSCs, UCSCs, ADSCs and BMSCs, and at day 14 for CHSCs, which had the greatest overall ALP activity. Of all the cell types, only scaffolds cultured with ADSCs in osteogenic media had increased hardness and local modulus as compared to blank scaffolds after 21 days of cell culture and osteogenic differentiation. Overall, ADSCs performed most favorably on the SMP scaffold. The SMP scaffold was able to support key cellular behaviors of MSCs and could potentially be a viable, regenerative alternative to autograft.


    • 28 August 2019
      • Vol. 67  (5) , 30-34

    Effect of high-speed sintering on the properties of a zirconia material.

    by McKinley D Soult, Wen Lien, Daniel A Savett, Francisco F Gallardo, Kraig S Vandewalle

    Digital dentistry has led to the success of same-day, single-crown delivery. Unlike traditional convection furnaces for fabrication of zirconia materials, which typically require several hours to complete sintering, a dedicated high-speed sintering furnace that reportedly sinters zirconia in minutes is now available. Sintering times may increase or decrease based on the size of the restoration due to a novel interface between the chairside acquisition unit, milling unit, and furnace. The purpose of this study was to compare the flexural properties (strength and modulus), optical parameters (translucency and opalescence), and grain size of a full-contour tetragonal zirconia material after sintering in either a novel high-speed furnace or a conventional zirconia furnace. Rectangular zirconia beams were milled and sintered using the high-speed induction furnace for 26.2 minutes or a conventional convection furnace for 4.3 hours. Flexural strength and modulus were determined by subjecting the beams to a 3-point bending test in a materials testing machine. Translucency and opalescence were calculated using a spectrophotometer, and grain size was determined by using an atomic force microscope. The dedicated high-speed induction furnace sintered the tetragonal zirconia specimens in substantially less time than the conventional convection furnace, with a statistically significant decrease in grain size and no significant difference in strength or optical properties.


  • Properties of a New Nanofiber Restorative Composite

    by Em Yancey, W Lien, Cs Nuttall, Ja Brewster, Hw Roberts, Ks Vandewalle

    SUMMARY: A new nanofiber-reinforced hybrid composite (NovaPro Fill, Nanova) was recently introduced with reportedly improved mechanical properties. The purpose of this study was to compare the properties (flexural strength/modulus, degree of conversion [DC], depth of cure, and polymerization shrinkage) of the nanofiber composite to those of traditional hybrid composites (Filtek Z250, 3M ESPE; Esthet-X HD, Dentsply). To determine flexural strength and modulus, composite was placed in a rectangular mold, light-cured, stored for 24 hours, and then fractured in a universal testing machine. For degree of conversion, composite was placed in a cylindrical mold, light-cured, and stored for 24 hours. Measurements were made at the top and bottom surfaces using Fourier Transform Infrared Spectroscopy. To determine depth of cure, composite was placed in a cylindrical mold and light-cured. Uncured composite was scraped until polymerized resin was reached. Remaining composite was measured and divided by two. Polymerization shrinkage was determined by placing the composite material on a pedestal in a video-imaging device while light-curing. Shrinkage was determined after 10 minutes. Data were analyzed with one-way analysis of variance and Tukey post hoc test per property (α=0.05). Compared to Filtek Z250, NovaPro Fill had significantly lower flexural strength and modulus, greater volumetric shrinkage, and similar depth of cure, but greater top and bottom DC. Compared to Esthet-X HD, NovaPro Fill had similar flexural strength, shrinkage, and top and bottom DC, but significantly greater depth of cure and flexural modulus.


    • 18 November 2018
      • Vol. 66  (6) , 65-70

    Polish retention of ceramic-polymer CAD/CAM materials.

    by Kristie Partin-Agarwal, Robert J Terwilliger, Wen Lien, Jeffrey P Jessup, Nancy C Motyka, Kraig S Vandewalle

    New ceramic-polymer millable materials that may be less resistant to the abrasive effects of toothbrushing than glass-ceramic materials have been introduced recently. The purpose of this study was to evaluate the polish retention of ceramic-polymer materials after mechanical toothbrush abrasion. Four ceramic-polymer materials (Enamic, Lava Ultimate, CeraSmart, and Block HC) were compared to a lithium disilicate glass-ceramic material (IPS e.max CAD). After 10 specimens of each material were polished, baseline area surface roughness (Sa) measurements were made. Specimens were then placed in a toothbrushing machine for 60,000 strokes, simulating 8 years of brushing. Surface roughness measurements were repeated after 30,000 and 60,000 brush strokes. At the end of the brushing, IPS e.max CAD and Enamic had the lowest mean Sa values (0.50 [SD 0.17] and 0.55 [0.13] µm², respectively), while Block HC had the greatest (1.10 [0.10] µm²). Lava Ultimate and CeraSmart demonstrated intermediate Sa values (0.81 [0.14] and 0.72 [0.11] µm², respectively). Only IPS e.max CAD had no statistically significant increase in surface roughness after toothbrushing.


  • Open Access

    Longitudinal Analysis of CAD/CAM Restoration Incorporation Rates into Navy Dentistry

    by Noel Dickens, Humza Haider, Wen Lien, John Simecek, Jonathan Stahl

    Computer-aided design/computer-aided manufacturing (CAD/CAM) has gained increasing popularity since the first commercially viable dental system was introduced in the mid-1980s. Digitally milled dental restorations can be fabricated chairside in the course of one dental appointment, reducing time, cost, and manpower when compared with traditional laboratory-fabricated analog restorations. Clinical performance, physical properties, and esthetics of digital restorations have been shown to be comparable to traditional analog restorations. The Navy has incorporated CAD/CAM systems into dental clinics on multiple platforms to include ships. The efficiency of this technology has the potential to positively impact dental health and mission readiness. The objective of the present study was to evaluate placement rates of CAD/CAM restorations by Navy dental providers. Placement rates of CAD/CAM restorations from October 2011 to June 2017 (Department of Defense created codes specific to CAD/CAM restorations in 2011) and of laboratory-fabricated analog restorations from January 2008 to June 2017 were queried from the Dental Common Access System (DENCAS) and Corporate Dental Access system (CDA) and evaluated. Scatterplots for each dental restoration category were generated using monthly production data and overlaid with simple linear regression lines and 95% confidence intervals. Regression analysis was performed to determine whether changes in the monthly percentages of placements before and after CAD/CAM were increasing or decreasing and to determine whether the monthly percent change from before CAD/CAM implementation and after CAD/CAM implementation was significantly different from one another. A total of 20,512 CAD/CAM restorations were placed by Navy providers over the 68-month period. A year-over-year increase in digitally fabricated restorations was observed. As a percentage of total indirect restorations, CAD/CAM units surged from 13.8% in 2012 to 38.1% in 2017. All ceramic restorations fabricated by the classical analog method also increased significantly through the period. Traditional analog porcelain fused to metal (PFM) restorations and large amalgam restorations, which frequently serve a similar clinical purpose as indirect or direct full or partial tooth coverage restorations, both decreased significantly after CAD/CAM productivity tracking was initiated. Implementation of CAD/CAM digital restorations has led to a significant decline in specific traditional analog procedures since productivity tracking of CAD/CAM was initiated in 2011. Navy dentistry has embraced CAD/CAM as an efficient means to prepare sailors and marines for deployments, improve operational dental readiness, and potentially decrease dental emergencies by reducing the need for provisional restorations. The trend toward increased utilization of digital dentistry is expected to continue for the following reasons: (1) incorporation of CAD/CAM technology into dental school curricula, (2) advancement of CAD/CAM systems equipped with fast-evolving user interfaces, (3) increased accessibility to CAD/CAM technology in Navy clinics, and (4) training of a greater proportion of dentists in digital CAD/CAM technology. Future studies should investigate the survival rate of CAD/CAM restorations placed within military settings, cost, and manpower of maintaining CAD/CAM units, and impact on military dental laboratories associated with increased CAD/CAM usage.


  • Effect of high-intensity curing lights on the polymerization of bulk-fill composites

    by Mindy M. Daugherty, Wen Lien, Michael R. Mansell, Douglas L. Risk, Daniel A. Savett, Kraig S. Vandewalle


  • Fracture Resistance of Pressed and Milled Lithium Disilicate Anterior Complete Coverage Restorations Following Endodontic Access Preparation

    by Petrina Gerogianni, Wen Lien, Despoina Bompolaki, Ronald Verrett, Stephan Haney, Patrick Mattie, Russell Johnson

    Purpose: This in vitro study evaluated the fracture resistance and clinical prognosis of anterior lithium disilicate crowns (e.max Press and e.max CAD), following endodontic access and repair. The research design simulates intraoral loading conditions to produce clinically applicable results.Materials and Methods: Monolithic anterior crowns, based on #8 anatomy, were fabricated from e.max Press ingots and e.max CAD blocks and adhesively bonded on identical dies milled out of a dentin analog material (NEMA G10). Specimens were divided into 4 groups: intact pressed, repaired pressed, intact milled, and repaired milled (n = 15/group). Repaired pressed and repaired milled were prepared with a standardized endodontic access and repaired using a porcelain repair system and composite resin. All crowns were cyclically loaded under simulated oral conditions and then loaded to failure in water, using a universal testing machine. Data were interpreted using ANOVA/Tukey post‐hoc test (α = 0.05).Results: Mean loads to failure ranged from 758.9 to 931.4 N for the 4 groups, indicating that both fabrication techniques, pressed and milled, yielded restorations that could reasonably withstand maximum masticatory forces. The pressed groups (923.7 N) exhibited significantly higher fracture resistance than the milled groups (797.5 N), p = 0.0002. When milled and pressed groups were categorized into intact and repaired subgroups, no difference was found in fracture resistance between the subgroups. Differences were noted in the modes of fracture, where the milled groups (intact and repaired) exhibited higher frequency of catastrophic fractures than the pressed groups.Conclusions: Endodontic access preparation does not appear to affect fracture resistance of an anterior lithium disilicate restoration, suggesting that replacement may not be necessary. Fabrication technique had a significant effect on fracture resistance and fracture mode of lithium disilicate restorations. The pressed fabrication technique resulted in significantly greater crown strength and fracture resistance than the milled technique.


  • A clinical study comparing digital radiography and near‐infrared transillumination in caries detection

    by Stephen C. Berg, Jonathan Miles Stahl, Wen Lien, Casey M. Slack, Kraig S. Vandewalle

    Objective: The purpose of this study was to compare the effectiveness of detecting proximal carious lesions utilizing a new near‐infrared transillumination (NIRTI) system (CariVu, Dexis) to traditional digital bitewing radiography (BWXR).Materials and methods: Thirty patients received four posterior BWXRs and all premolars and molars were individually imaged with the NIRTI device. Sixty‐seven proximal carious lesions were classified based on their depth into enamel or dentin for both BWXR and NIRTI images.Results: The caries depth classification between the two systems were strongly correlated (rs = 0.66; Spearman range: 0.60–0.79 = strong) and significant (P < .001) with a median score of 3 for NIRTI and 2 for BWXR.Conclusions: The new NIRTI system (CariVu) may serve as an adjunct to BWXR in the diagnosis of proximal caries.Clinical significance: The NIRTI system could serve as an adjunct diagnostic system that could be used in high‐caries risk programs where patients are closely monitored with regimented follow‐up appointments. NIRTI could also be beneficial with pregnant or pediatric patients, and in situations where radiography may not be available such as remote humanitarian missions.