Javier Muñoz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Javier Muñoz has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Eduardo Lorenzo
Solar Energy Institute Polytechnic University of Madrid Madrid Spain
11 shared publications - Francisco Martínez-Moreno
Universidad Politécnica de Madrid
4 shared publications - Luis Narvarte
Instituto de Energía Solar, Universidad Politécnica de Madrid (IES-UPM), 28040 Madrid, Spain
4 shared publications R. Moretón
2 shared publicationsA. Pinto
1 shared publicationAnthony Praino
IBM T. J. Watson, NY
1 shared publication
Latest Publications
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Crumble as an educational tool to introduce robotics
The aim of this paper is to introduce the use of Crumble, an emerging tool, to guide the introduction to educational robotics as the second step in introducing students to robotics. Robotics requires various skills such as systems thinking, programming mentality, active learning, mathematics, science, judgment and decision making, good communication, technological design, complex problem solving and persistence. These skills can be easily developed using Crumble. The results of the educational robotics course demonstrate how children with previous Scratch programming experience, but no physical robot experience can continue the learning process through classroom experiences. The result of this work shows that it is better to adapt the difficulty to each of the children. Finally, it is important to combine theory and practice in order to include fun tasks intertwined with the challenges of applying theory to problem solving.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Crumble as an educational tool to introduce robotics
The aim of this paper is to introduce the use of Crumble, an emerging tool, to guide the introduction to educational robotics as the second step in introducing students to robotics. Robotics requires various skills such as systems thinking, programming mentality, active learning, mathematics, science, judgment and decision making, good communication, technological design, complex problem solving and persistence. These skills can be easily developed using Crumble. The results of the educational robotics course demonstrate how children with previous Scratch programming experience, but no physical robot experience can continue the learning process through classroom experiences. The result of this work shows that it is better to adapt the difficulty to each of the children. Finally, it is important to combine theory and practice in order to include fun tasks intertwined with the challenges of applying theory to problem solving.
- Open Access
- 1 October 2017
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 78, 886-903
From broadband horizontal to effective in-plane irradiation: A review of modelling and derived uncertainty for PV yield prediction
- 1 October 2017
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 78, 886-903
Open AccessFrom broadband horizontal to effective in-plane irradiation: A review of modelling and derived uncertainty for PV yield prediction
- Open Access
- 1 November 2016
- Published by Elsevier in Renewable Energy
- Vol. 97, 680-688
A simple model for the prediction of yearly energy yields for grid-connected PV systems starting from monthly meteorological data
- 1 November 2016
- Published by Elsevier in Renewable Energy
- Vol. 97, 680-688
Open AccessA simple model for the prediction of yearly energy yields for grid-connected PV systems starting from monthly meteorological data
- Open Access
- 4 October 2013
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 23 (2) , 247-252
Design of a twin capacitive load and its application to the outdoor rating of photovoltaic modules
- 4 October 2013
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 23 (2) , 247-252
Open AccessDesign of a twin capacitive load and its application to the outdoor rating of photovoltaic modules
- 31 March 2011
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 20 (1) , 100-105
On the testing of large PV arrays
This paper reports on the IES‐UPM experience from 2006 to 2010 in the field of the characterization of PV arrays of commercial large PV plants installed in Spain within the framework of the profitable economic scenarios associated to feed‐in tariff laws. This experience has extended to 200 MW and has provided valuable lessons to minimize uncertainty, which plays a key role in quality assurance procedures. The paper deals not only with classic I–V measurements but also with watt‐metering‐based procedures. Particular attention is paid to the selection of irradiance and cell temperature sensors. Copyright © 2011 John Wiley & Sons, Ltd.
- 31 March 2011
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 20 (1) , 100-105
On the testing of large PV arrays
This paper reports on the IES‐UPM experience from 2006 to 2010 in the field of the characterization of PV arrays of commercial large PV plants installed in Spain within the framework of the profitable economic scenarios associated to feed‐in tariff laws. This experience has extended to 200 MW and has provided valuable lessons to minimize uncertainty, which plays a key role in quality assurance procedures. The paper deals not only with classic I–V measurements but also with watt‐metering‐based procedures. Particular attention is paid to the selection of irradiance and cell temperature sensors. Copyright © 2011 John Wiley & Sons, Ltd.
- 23 February 2011
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 19 (2) , 192-201
On‐site characterisation and energy efficiency of grid‐connected PV inverters
The size of inverters in large grid‐connected photovoltaic (PV) systems is increasing. At present, the largest installed inverters have nominal powers of several hundreds of kW, which makes their characterisation in the laboratory difficult. As an alternative, on‐site characterisation requires only measurement equipment and has the advantage that the inverter is tested in its own PV system under real operating conditions. This paper describes an on‐site testing procedure for assessing the power efficiency of an inverter and the results obtained for 13 inverters with nominal powers between 3.3 and 350 kW. The inverters were tested in PV grid‐connected systems whose aggregate power capacity is nearly 150 MW. The energy efficiency of the inverters tested was also calculated yearly, and the results were compared with both European and Californian energy efficiency parameters, which are widely used in the current PV market. Copyright © 2010 John Wiley & Sons, Ltd.
- 23 February 2011
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 19 (2) , 192-201
On‐site characterisation and energy efficiency of grid‐connected PV inverters
The size of inverters in large grid‐connected photovoltaic (PV) systems is increasing. At present, the largest installed inverters have nominal powers of several hundreds of kW, which makes their characterisation in the laboratory difficult. As an alternative, on‐site characterisation requires only measurement equipment and has the advantage that the inverter is tested in its own PV system under real operating conditions. This paper describes an on‐site testing procedure for assessing the power efficiency of an inverter and the results obtained for 13 inverters with nominal powers between 3.3 and 350 kW. The inverters were tested in PV grid‐connected systems whose aggregate power capacity is nearly 150 MW. The energy efficiency of the inverters tested was also calculated yearly, and the results were compared with both European and Californian energy efficiency parameters, which are widely used in the current PV market. Copyright © 2010 John Wiley & Sons, Ltd.
- Open Access
- 23 February 2011
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 19 (6) , 747-753
Tracking and back‐tracking
This paper presents a review of back‐tracking geometry not only for single axis but also for two‐axis tracking and analyses the corresponding energy gains. It compares the different back‐tracking strategies with the ideal tracking in terms of energy yield concluding, on the one hand, that back‐tracking is more useful for single horizontal axis than for the single vertical one, and on the other hand, that back‐tracking is more efficient when applied in the primary axis of a two‐axis tracker. Copyright © 2011 John Wiley & Sons, Ltd.
- 23 February 2011
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 19 (6) , 747-753
Open AccessTracking and back‐tracking
This paper presents a review of back‐tracking geometry not only for single axis but also for two‐axis tracking and analyses the corresponding energy gains. It compares the different back‐tracking strategies with the ideal tracking in terms of energy yield concluding, on the one hand, that back‐tracking is more useful for single horizontal axis than for the single vertical one, and on the other hand, that back‐tracking is more efficient when applied in the primary axis of a two‐axis tracker. Copyright © 2011 John Wiley & Sons, Ltd.
- 1 December 2010
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 94 (12) , 2298-2303
Experimental model to estimate shading losses on PV arrays
- 1 December 2010
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 94 (12) , 2298-2303
Experimental model to estimate shading losses on PV arrays
- 1 April 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21659559,p. 1737-1740
A virtual photovoltaic power systems laboratory
This paper describes the design and implementation of a virtual laboratory for photovoltaic power systems based on the Cadence PSpice circuit simulator, which is intended to be a complement to the traditional physical laboratory in undergraduate photovoltaic engineering courses.
- 1 April 2010
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21659559,p. 1737-1740
A virtual photovoltaic power systems laboratory
This paper describes the design and implementation of a virtual laboratory for photovoltaic power systems based on the Cadence PSpice circuit simulator, which is intended to be a complement to the traditional physical laboratory in undergraduate photovoltaic engineering courses.