Jiyoung Min
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jiyoung Min has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Hajin Choi
School of Architecture, Soongsil University, Seoul 06978, Republic of Korea
5 shared publications Ryulri Kim
4 shared publicationsJinyoung Hong
3 shared publicationsBinna Lee
2 shared publications- Haemin Jeon
Department of Civil and Environmental Engineering Hanbat National University 34158 Daejeon Korea
2 shared publications - Hyuntae Bang
Department of Civil and Environmental Engineering, Hanbat National University, Daejeon 34158, Korea
2 shared publications
Latest Publications
- Open Access
- 14 July 2026
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 50
Fully automated air-coupled ultrasonic inspection of concrete infrastructure via multi-sensor time-warping alignment
- 14 July 2026
- Published by Elsevier in Computer-Aided Civil and Infrastructure Engineering
- Vol. 50
Open AccessFully automated air-coupled ultrasonic inspection of concrete infrastructure via multi-sensor time-warping alignment
- Open Access
- 28 March 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 521
Multimodal NDT-integrated neural network with cGAN augmentation for predicting reinforcement corrosion in RC structures
- 28 March 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 521
Open AccessMultimodal NDT-integrated neural network with cGAN augmentation for predicting reinforcement corrosion in RC structures
- Open Access
- 1 January 2026
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2026 (1)
Data‐Driven Prognostic Framework for Chloride‐Induced Corrosion in Aging Concrete Structures: Integrating Minimal Field Data With Mix‐Design Inference
Accurate evaluation of chloride‐induced corrosion in reinforced concrete (RC) structures is essential for effective maintenance, yet conventional diagnostic approaches require full‐depth coring and laboratory testing to determine chloride profiles and diffusion coefficients. These procedures are costly and invasive for large‐scale routine inspection. This study proposes a data‐driven framework that enables corrosion initiation assessment using only surface chloride measurements combined with machine‐learning (ML)–based estimation of chloride diffusion coefficients. To address the large uncertainty associated with unknown mix proportions in existing structures, regional mix‐design statistics were incorporated to constrain ML model inputs and reduce prediction variability. The resulting diffusion coefficient distributions were then integrated into a probabilistic chloride ingress model based on fib Model Code 2010, allowing explicit propagation of uncertainties in material properties, cover depth, and environmental exposure through Monte Carlo simulation. Field validation was conducted using concrete cores extracted from roadside barriers and bridge components located in inland and coastal environments. Comparison between predicted and measured chloride profiles demonstrated that the proposed approach successfully captures the range and depth of chloride penetration observed in practice. The results indicate that this minimally invasive method can support early‐stage depassivation probability screening, optimize locations requiring detailed testing, and enhance decision‐making in infrastructure asset management. It should be noted that this approach assesses the risk of corrosion initiation (i.e., depassivation onset) and not the actual condition or section loss of the embedded reinforcement.
- 1 January 2026
- Published by Wiley in Structural Control and Health Monitoring
- Vol. 2026 (1)
Open AccessData‐Driven Prognostic Framework for Chloride‐Induced Corrosion in Aging Concrete Structures: Integrating Minimal Field Data With Mix‐Design Inference
Accurate evaluation of chloride‐induced corrosion in reinforced concrete (RC) structures is essential for effective maintenance, yet conventional diagnostic approaches require full‐depth coring and laboratory testing to determine chloride profiles and diffusion coefficients. These procedures are costly and invasive for large‐scale routine inspection. This study proposes a data‐driven framework that enables corrosion initiation assessment using only surface chloride measurements combined with machine‐learning (ML)–based estimation of chloride diffusion coefficients. To address the large uncertainty associated with unknown mix proportions in existing structures, regional mix‐design statistics were incorporated to constrain ML model inputs and reduce prediction variability. The resulting diffusion coefficient distributions were then integrated into a probabilistic chloride ingress model based on fib Model Code 2010, allowing explicit propagation of uncertainties in material properties, cover depth, and environmental exposure through Monte Carlo simulation. Field validation was conducted using concrete cores extracted from roadside barriers and bridge components located in inland and coastal environments. Comparison between predicted and measured chloride profiles demonstrated that the proposed approach successfully captures the range and depth of chloride penetration observed in practice. The results indicate that this minimally invasive method can support early‐stage depassivation probability screening, optimize locations requiring detailed testing, and enhance decision‐making in infrastructure asset management. It should be noted that this approach assesses the risk of corrosion initiation (i.e., depassivation onset) and not the actual condition or section loss of the embedded reinforcement.
- 7 October 2025
- Published by Elsevier in NDT & E International
- Vol. 158
Influence of antenna polarization and moisture content on detection of GFPR bars in concrete using ground penetrating radar
- 7 October 2025
- Published by Elsevier in NDT & E International
- Vol. 158
Influence of antenna polarization and moisture content on detection of GFPR bars in concrete using ground penetrating radar
- 20 February 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 469
Non-destructive evaluation of micro-damage near concrete anchors under dynamic loading
- 20 February 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 469
Non-destructive evaluation of micro-damage near concrete anchors under dynamic loading
- Open Access
- 24 October 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 1902
Development of AI-Based Multisensory System for Monitoring Quay Wall Events
Structural monitoring of quay walls, where various events occur due to unexpected high waves, vessels, and heavy equipment, is essential. However, real-time events cannot be constantly monitored by on-site personnel. To resolve the aforementioned issues, this study proposes an innovative AI-powered, cloud-based wireless sensor system that incorporates a high-sensitivity accelerometer with an ultra-low noise level of 0.003 mg, designed to monitor the low response amplitude of massive quay walls. The sensor can be activated by a scheduled trigger or a long-rangefinder. Vessel detection is performed utilizing the AI-based object detection method, Faster R-CNN, which employs ResNet as the backbone network. The detected anchor box’s position and dimensions are subsequently processed to confirm the presence of a berthing vessel. The collected data are then transmitted wirelessly to a proposed cloud server through LTE communication in real-time. The developed system was installed on a caisson-type quay wall in Korea, where acceleration, tilt, temperature, and camera image data were analyzed to assess its performance for real-time event monitoring. The results demonstrated that the safety of quay walls can be automatically managed by monitoring events during berthing and mooring with the proposed system.
- 24 October 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (11) , 1902
Open AccessDevelopment of AI-Based Multisensory System for Monitoring Quay Wall Events
Structural monitoring of quay walls, where various events occur due to unexpected high waves, vessels, and heavy equipment, is essential. However, real-time events cannot be constantly monitored by on-site personnel. To resolve the aforementioned issues, this study proposes an innovative AI-powered, cloud-based wireless sensor system that incorporates a high-sensitivity accelerometer with an ultra-low noise level of 0.003 mg, designed to monitor the low response amplitude of massive quay walls. The sensor can be activated by a scheduled trigger or a long-rangefinder. Vessel detection is performed utilizing the AI-based object detection method, Faster R-CNN, which employs ResNet as the backbone network. The detected anchor box’s position and dimensions are subsequently processed to confirm the presence of a berthing vessel. The collected data are then transmitted wirelessly to a proposed cloud server through LTE communication in real-time. The developed system was installed on a caisson-type quay wall in Korea, where acceleration, tilt, temperature, and camera image data were analyzed to assess its performance for real-time event monitoring. The results demonstrated that the safety of quay walls can be automatically managed by monitoring events during berthing and mooring with the proposed system.
- Open Access
- 6 October 2024
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 36 (5) , 177-184
Comparative Study on NDT Techniques for Evaluation of Concrete Quality Exposed to Marine Environment
Concrete, the primary material used in quay walls, is directly exposed to saline environments. Coping concrete, particularly in areas where periodic berthing and loading/unloading occur, is prone to rapid quality deterioration. Current facility safety and maintenance guidelines assess concrete durability at specific points through sampling, which are intended to represent the entire inspection unit. This paper explores quality management strategies from an areal perspective by applying various non-destructive scanning methods to extensive areas of coping concrete. Ultrasonic array imaging and ground-penetrating radar scanning images revealed significant quality degradation in berthing operation areas, whereas sampling-based ultrasonic pulse velocity and rebound hardness values were less effective in detecting this degradation.
- 6 October 2024
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 36 (5) , 177-184
Open AccessComparative Study on NDT Techniques for Evaluation of Concrete Quality Exposed to Marine Environment
Concrete, the primary material used in quay walls, is directly exposed to saline environments. Coping concrete, particularly in areas where periodic berthing and loading/unloading occur, is prone to rapid quality deterioration. Current facility safety and maintenance guidelines assess concrete durability at specific points through sampling, which are intended to represent the entire inspection unit. This paper explores quality management strategies from an areal perspective by applying various non-destructive scanning methods to extensive areas of coping concrete. Ultrasonic array imaging and ground-penetrating radar scanning images revealed significant quality degradation in berthing operation areas, whereas sampling-based ultrasonic pulse velocity and rebound hardness values were less effective in detecting this degradation.
- 11 August 2024
- Published by Elsevier in Measurement
- Vol. 239
Automated ultrasonic scattering energy method for evaluation of small-sized cracking damage in concrete
- 11 August 2024
- Published by Elsevier in Measurement
- Vol. 239
Automated ultrasonic scattering energy method for evaluation of small-sized cracking damage in concrete
- Open Access
- 30 June 2024
- Published by Korea Society of Coastal Disaster Prevention in Korea Society of Coastal Disaster Prevention
- Vol. 11 (2) , 35-41
Development of Event Monitoring Technique for Berthing Facilities based on a Commercial IoT Sensor
This paper focuses on the technique for managing both the behavior of port mooring facilities and vessel docking events using commercial IoT sensors. An IoT sensor was installed on the concrete caisson quay wall in Incheon Port and monitored at a sampling rate of 100 Hz. The measured data were transmitted to a cloud server every 10 minutes via LTE communication. The amplitude of the data significantly increased during vessel arrivals, allowing for the identification of vessel docking and departure times. Additionally, considerable vibrations were intermittently detected while the vessel was moored. Frequency domain analysis revealed different peak frequencies depending on the vessel type, enabling the distinction of vessel types. These results demonstrate that commercial IoT sensors can be effectively used not only to ensure the safety of the structures themselves but also to monitor events such as vessel arrivals and departures.
- 30 June 2024
- Published by Korea Society of Coastal Disaster Prevention in Korea Society of Coastal Disaster Prevention
- Vol. 11 (2) , 35-41
Open AccessDevelopment of Event Monitoring Technique for Berthing Facilities based on a Commercial IoT Sensor
This paper focuses on the technique for managing both the behavior of port mooring facilities and vessel docking events using commercial IoT sensors. An IoT sensor was installed on the concrete caisson quay wall in Incheon Port and monitored at a sampling rate of 100 Hz. The measured data were transmitted to a cloud server every 10 minutes via LTE communication. The amplitude of the data significantly increased during vessel arrivals, allowing for the identification of vessel docking and departure times. Additionally, considerable vibrations were intermittently detected while the vessel was moored. Frequency domain analysis revealed different peak frequencies depending on the vessel type, enabling the distinction of vessel types. These results demonstrate that commercial IoT sensors can be effectively used not only to ensure the safety of the structures themselves but also to monitor events such as vessel arrivals and departures.
- Open Access
- 31 January 2023
- Published by Korea Society of Coastal Disaster Prevention in Korea Society of Coastal Disaster Prevention
- Vol. 10 (1) , 1-12
Development of Online-learning based Adaptive Anomaly Detection Algorithm for Monitoring Data Analysis on Caisson Type Breakwater
Most port structures are massive and data measured on them sensitively changes to the surrounding environment including sea waves, tides, wind, and other operational conditions so it might be difficult to extract and long-term monitor their own features such as natural frequencies and mode shapes. To solve this problem, an anomaly detection algorithm with online learning was developed for the analysis of monitoring data on the port structures. For this, data were first measured on a 1/50 scaled model of caisson type breakwater through hydraulic model experiments, and the characteristics of data were investigated. Then an unsupervised algorithm was developed to online detect abnormal conditions caused by the drift, which can track the reconstruction error from the principal component analysis and the Euclidean distance between original and reconstructed signals. The experimental results showed that the proposed algorithm could be successfully applied to time-dependent dataset shifts with high accuracy and automatically calculate the threshold based on the adaptive model.
- 31 January 2023
- Published by Korea Society of Coastal Disaster Prevention in Korea Society of Coastal Disaster Prevention
- Vol. 10 (1) , 1-12
Open AccessDevelopment of Online-learning based Adaptive Anomaly Detection Algorithm for Monitoring Data Analysis on Caisson Type Breakwater
Most port structures are massive and data measured on them sensitively changes to the surrounding environment including sea waves, tides, wind, and other operational conditions so it might be difficult to extract and long-term monitor their own features such as natural frequencies and mode shapes. To solve this problem, an anomaly detection algorithm with online learning was developed for the analysis of monitoring data on the port structures. For this, data were first measured on a 1/50 scaled model of caisson type breakwater through hydraulic model experiments, and the characteristics of data were investigated. Then an unsupervised algorithm was developed to online detect abnormal conditions caused by the drift, which can track the reconstruction error from the principal component analysis and the Euclidean distance between original and reconstructed signals. The experimental results showed that the proposed algorithm could be successfully applied to time-dependent dataset shifts with high accuracy and automatically calculate the threshold based on the adaptive model.