Hyuntae Bang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hyuntae Bang has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Haemin Jeon
Department of Civil and Environmental Engineering Hanbat National University 34158 Daejeon Korea
2 shared publications - Jiyoung Min
Department of Structural Engineering Research, Korea Institute of Civil Engineering and Building Technology, Goyang-si 10233, Republic of Korea
2 shared publications - Yuseok Bang
SRH Solution, Hwaseong-si 18496, Korea
1 shared publication
Latest Publications
- Open Access
- 13 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (14) , 6470
Port Structure Inspection Based on 6-DOF Displacement Estimation Combined with Homography Formulation and Genetic Algorithm
A vision sensor-based 6-DOF displacement evaluation method incorporating a genetic algorithm was proposed to monitor the critical defects of port infrastructure, such as deflection, slope, and slip. The 6-DOF behavior of the port structure, including subsidence, was estimated based on the specification of the target and fixed structures nearby. The method calculates the relative position of the target port structure and measures the movement of the structure over time. To improve the measurement accuracy, a genetic algorithm was used to adjust the intrinsic parameters that were previously estimated using the checkerboards. The results of measuring 6-DOF displacements based on the tuned intrinsic parameters confirmed that it has the potential to accurately measure the 6-DOF behavior of port facilities. The possibility of field application was examined through an artificial movement that was induced in the image of the port facility to create an arbitrary displacement between two points.
- 13 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (14) , 6470
Open AccessPort Structure Inspection Based on 6-DOF Displacement Estimation Combined with Homography Formulation and Genetic Algorithm
A vision sensor-based 6-DOF displacement evaluation method incorporating a genetic algorithm was proposed to monitor the critical defects of port infrastructure, such as deflection, slope, and slip. The 6-DOF behavior of the port structure, including subsidence, was estimated based on the specification of the target and fixed structures nearby. The method calculates the relative position of the target port structure and measures the movement of the structure over time. To improve the measurement accuracy, a genetic algorithm was used to adjust the intrinsic parameters that were previously estimated using the checkerboards. The results of measuring 6-DOF displacements based on the tuned intrinsic parameters confirmed that it has the potential to accurately measure the 6-DOF behavior of port facilities. The possibility of field application was examined through an artificial movement that was induced in the image of the port facility to create an arbitrary displacement between two points.
- Open Access
Deep Learning-Based Concrete Surface Damage Monitoring Method Using Structured Lights and Depth Camera
Due to the increase in aging structures and the decrease in construction workforce, there is an increasing interest in automating structural damage monitoring. Surface damage on concrete structures, such as cracks, delamination, and rebar exposure, is one of the important parameters that can be used to estimate the condition of the structure. In this paper, deep learning-based detection and quantification of structural damage using structured lights and a depth camera is proposed. The proposed monitoring system is composed of four lasers and a depth camera. The lasers are projected on the surface of the structures, and the camera captures images of the structures while measuring distance. By calculating an image homography, the captured images are calibrated when the structure and sensing system are not in parallel. The Faster RCNN (Region-based Convolutional Neural Network) with Inception Resnet v2 architecture is used to detect three types of surface damage: (i) cracks; (ii) delamination; and (iii) rebar exposure. The detected damage is quantified by calculating the positions of the projected laser beams with the measured distance. The experimental results show that structural damage was detected with an F1 score of 0.83 and a median value of the quantified relative error of less than 5%.
Open AccessDeep Learning-Based Concrete Surface Damage Monitoring Method Using Structured Lights and Depth Camera
Due to the increase in aging structures and the decrease in construction workforce, there is an increasing interest in automating structural damage monitoring. Surface damage on concrete structures, such as cracks, delamination, and rebar exposure, is one of the important parameters that can be used to estimate the condition of the structure. In this paper, deep learning-based detection and quantification of structural damage using structured lights and a depth camera is proposed. The proposed monitoring system is composed of four lasers and a depth camera. The lasers are projected on the surface of the structures, and the camera captures images of the structures while measuring distance. By calculating an image homography, the captured images are calibrated when the structure and sensing system are not in parallel. The Faster RCNN (Region-based Convolutional Neural Network) with Inception Resnet v2 architecture is used to detect three types of surface damage: (i) cracks; (ii) delamination; and (iii) rebar exposure. The detected damage is quantified by calculating the positions of the projected laser beams with the measured distance. The experimental results show that structural damage was detected with an F1 score of 0.83 and a median value of the quantified relative error of less than 5%.