YWYong Wang

Yong Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yong Wang has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Ground Subsidence Prediction and Shaft Control in Pillar Recovery During Mine Closure

    by Defeng Wang, Zhenqi Wang, Yatao Li, Yong Wang

    With the progressive depletion of coal resources, the recovery of shaft pillars has become an important means of improving resource utilization and reducing waste. Taking the main shaft pillar recovery of the Longxiang Coal Mine at the stage of mine closure as the engineering background, this study systematically investigates ground subsidence prediction and shaft stability control under strip mining with symmetrical extraction. An improved subsidence prediction model was established by integrating the probability integral method with superposition theory, and its validity was verified through numerical simulations and field monitoring data. The results demonstrate that the proposed method can accurately capture the subsidence behavior under complex geological conditions, with prediction errors ranging from 6.4 mm to 399.1 mm. In fully subsided zones, the percentage error was as low as 1.1–3.5%, while larger deviations were observed in areas where subsidence was incomplete, confirming both the reliability and the practical limitations of the method under different conditions. Furthermore, the deformation mechanisms of the shaft during pillar recovery were analyzed. Monitoring results indicated that the maximum subsidence at the east and west sides of the shaft reached 7620.6 mm, accompanied by local cracks exceeding 1500 mm, which caused significant damage to surface structures. To address these risks, a safety control scheme based on an integrated “prediction–monitoring–control” framework is proposed, including shaft wall reinforcement, optimization of mining parameters, and continuous ground subsidence monitoring. By combining real-time monitoring with the superposition of small working face predictions, the scheme enables maximum recovery of shaft pillar coal while ensuring operational safety. This study provides a scientific basis and technical support for shaft pillar recovery in Longxiang Coal Mine and offers valuable theoretical guidance for similar mine closure projects, with significant implications for engineering practice.


  • Open Access

    Implementation of a Nesting Repair Technology for Transportation Pipeline Repair

    by Yijun Gao, Yong Wang, Qing Na, Jiawei Zhang, Aixiang Wu

    Filling methods in the mining industry can maximize the recovery of mineral resources and protect the underground and surface environments. In recent years, such methods have been widely used in metal mines where pipeline transportation typically plays a decisive role in the safety and stability of the entire filling system. Because the filling slurry contains a large percentage of solid coarse particles, the involved pipeline is typically eroded and often damaged during such a process. A possible solution is the so-called nesting repair technology. In the present study, nesting a 127 mm outer diameter pipeline in 151 mm inner diameter borehole is considered to meet the repair objective. First, by using the rheological theory, the pipeline transmission resistance and self-flow conveying range are calculated under different working conditions. It is shown that the pipeline transmission resistance is larger when the inner diameter of casing is 80 mm, and the limit flow rate of vertical pipeline self-flow is 120 m3/h; moreover, when the pipeline diameter is 100 mm and the flow rate is 140 m3/h, the self-flow conveying can be satisfied in most of the underground −455 m stage. Accordingly, a plan is presented for the nesting repair strategy, based on the installation of a drill bit under the casing and lowering the casing into the borehole as if it were a drill pipe. Finally, the outcomes of such a strategy are verified. The filling flow rate range using the new pipelines is found to be in the range from 188.60 to 224.39 m3/h, and its average filling flow rate reaches 209.83 m3/h when conveying 2319.6 m long-distance quarry.


  • Open Access

    Effect of Curing Temperature under Deep Mining Conditions on the Mechanical Properties of Cemented Paste Backfill

    by Yong Wang, Yansen Cao, Chen Cao, Hongjiang Wang

    Nowadays, the cemented paste backfill mining method is widely used in mines. Since the temperature of the mine increases with increasing mining depth, the influence of temperature on the mechanical properties of cemented paste backfill (CPB) require attention. To address the problem of less research on paste performance in high temperature environments, uniaxial compressive strength tests of CPB at different temperatures were performed, and it was observed that temperature had a significant effect on the CPB strength. The CPB strength at a curing temperature above 40 °C deteriorated in the later curing time period, CPB at 65 °C was “crisp”, and the strength was lower than 40 °C in 3~28 days. Microscopic tests, such as thermogravimetric analysis (TGA/DTG), X-ray diffraction (XRD) and scanning electronic microscopy (SEM) analysis, of the samples found that the coarsening of the pore structure of CPB was the main reason for the decrease in the strength caused by the increase in temperature. The effect of curing temperature on the deformation characteristics of CPB was studied. Different curing temperatures had a greater impact on the stress-strain curve and elastic modulus, and there was a linear relationship between the elastic modulus and strength. Finally, based on MATLAB, a back propagation (BP) neural network model of strength under different curing temperature conditions was established. Compared with the actual value and the predicted value, the average absolute error was less than 0.2 MPa, and the average relative error was less than 6%. This prediction model had a high accuracy. The research results provide a good reference significance for the strength design of CPB.


  • Open Access

    A Population Balance Model for Shear-Induced Polymer-Bridging Flocculation of Total Tailings

    by Zhuen Ruan, Aixiang Wu, Raimund Bürger, Fernando Betancourt, Rafael Ordoñez, Jiandong Wang, Shaoyong Wang, Yong Wang

    Shear-induced polymer-bridging flocculation is widely used in the solid–liquid separation process in cemented paste backfill, beneficial to water recycling and tailings management in metal mines. A flocculation kinetics model based on Population Balance Model (PBM) is proposed to model the polymer-bridging flocculation process of total tailings. The PBM leads to a system of ordinary differential equations describing the evolution of the size distribution, and incorporates an aggregation kernel and a breakage kernel. In the aggregation kernel, a collision frequency model describes the particle collision under the combined effects of Brownian motions, shear flow, and differential sedimentation. A semi-empirical collision efficiency model with three fitting parameters is applied. In the breakage kernel, a new breakage rate coefficient model with another three fitting parameters is introduced. Values of the six fitting parameters are determined by minimizing the difference between experimental data obtained from FBRM and modeling result through particle swarm global optimization. All of the six fitting parameters vary with flocculation conditions. The six fitting parameters are regressed with the flocculation factors with six regression models obtained. The validation modeling demonstrates that the proposed PBM quantifies well the dynamic evolution of the floc size during flocculation under the given experimental setup. The investigation will provide significant new insights into the flocculation kinetics of total tailings and lay a foundation for studying the performance of the feedwell of a gravity thickener.


  • Optimization of flocculation and settling parameters of tailings slurry by response surface methodology

    by Aixiang Wu, Zhuen Ruan, Raimund Bürger, Shenghua Yin, Jiandong Wang, Yong Wang


  • Electrophilicity index as a critical indicator for the biodegradation of the pharmaceuticals in aerobic activated sludge processes

    by Zongsu Wei, Wei Li, Dongye Zhao, Youngwoo Seo, Richard Spinney, Dionysios D. Dionysiou, Yong Wang, Weizhi Zeng, Ruiyang Xiao


  • Open Access

    A Theoretical Model for the Rake Blockage Mitigation in Deep Cone Thickener: A Case Study of Lead‐Zinc Mine in China

    by Zhuen Ruan, Yong Wang, Aixiang Wu, Shenghua Yin, Fei Jin

    Deep cone thickener (DCT) is key equipment in cemented paste backfill (CPB) technology. However, rake blockage occurs frequently in DCT during the dewatering process of the unclassified tailings being thickened from dilute slurry to thickened tailings or paste. Rake blockage has disastrous effects on the CPB operation. In order to investigate the influencing factors of rake blockage in DCT, a mathematical model of rake power in DCT was developed. In addition, stacking mud bed (made of thickened tailings) from the DCT in Huize lead‐zinc mine (HLZM) in different rake blockage accidents was sampled and tested to investigate the effect of tailings characters on rake blockage. Results indicated that the concentration of the mud bed and the friction between the mud bed and the cone wall contributed to the rake blockage. The concentration and friction were influenced by the high content of coarse particles in the mud bed. Moreover, activating devices for bed mud, as the corrective and preventive action, were developed to prevent the rake blockage, which was valid in HLZM.


  • Open Access

    Investigation of the Sedimentation Property of Backfill Material on the Basis of Rheological Test: A Case Study of Iron Tailings

    by Yong Wang, Aixiang Wu, Lianfu Zhang, Hongjiang Wang, Fei Jin

    Sedimentation of filling materials could cause pipe blocking accident in mines. However, few quantitative characterization studies have investigated the sedimentation characteristics of filling materials. In this study, the sedimentation property of iron tailings with a cement-sand ratio of 1 : 4 and mass concentration of 73%∼82% was investigated based on rheology measurements. Results showed that shear stress increased as shear rate rose from 0 s−1to 120 s−1. The shear stress increased as the filling material concentration increased as well. However, when the shear rate was reversed from 120 s−1to 0 s−1, the shear stress presented an increase-constant-decrease change pattern as the mass concentration increases in the rheological curve. Accordingly, the sedimentation performance of iron tailings filling material was divided into three types: intense sedimentation (the ascending rheological curve) in the mass concentration range of 73%∼76%, slight sedimentation (the constant rheological curve) in the mass concentration range of 77%∼79%, and almost no sedimentation (the descending rheological curve) in the mass concentration range of 80%∼82%. The associated mechanism involving slurry mass concentration-rheological curves-sedimentation performance was illustrated. A correlation between the pipeline rheology and filling material sedimentation performance was established, which provides a practical guide to avoid pipeline blocking while transporting the filling material.


  • Open Access

    Temperature Effects on Rheological Properties of Fresh Thickened Copper Tailings that Contain Cement

    by Yong Wang, Aixiang Wu, Zhuen Ruan, Hongjiang Wang, Yiming Wang, Fei Jin

    Cemented paste backfill (CPB) is an economic and environmental friendly technique applied in underground mining for supporting surrounding rock and replacing the pillar. However, little is known about the temperature effects on CPB in mines having a large temperature fluctuation. The main purpose of this research was to investigate the effect of temperature change on the rheological properties (e.g., shear stress and apparent viscosity) of CPB with copper mine tailings. Specifically, a series of rheological tests were conducted on 6 CPB samples using a Brookfield R/S+ Rheometer under various temperatures (2°C, 10°C, 20°C, 30°C, 40°C, and 60°C). Our results showed that both shear stress and apparent viscosity of these tailing samples increased with temperature rising from 2 to 60°C. Likewise, temperature has a significant impact on the Bingham yield stress of thickened tailings. The yield stress decreased from 122 Pa (2°C) to 112 Pa (20°C) and then increased to 152 Pa (60°C). Moreover, the pipeline transport pressure drop of CPB at various temperatures was calculated, illustrating an obvious effect on the paste pipeline transport. Compared with 20°C, the pressure drop under 2°C and 60°C increased by 11% and 22%, respectively. The results of this study indicate that the temperature plays an essential role in determining rheological properties of CPB and its engineering application in mines particularly with naturally fluctuating temperatures.


  • Open Access

    Investigating the Effect of Solid Components on Yield Stress for Cemented Paste Backfill via Uniform Design

    by Yong Wang, Aixiang Wu, Lianfu Zhang, Fei Jin, Xiaohui Liu

    Cemented paste backfill (CPB) technology has been applied quite popular around the world. Yield stress is a key factor determining whether CPB could be transported. In order to reveal the effect of solid components on yield stress of CPB, a uniform design experimental program (four factors and six levels) was conducted to test the rheological property of a mine’s CPB. The tested four factors including mass fraction, cement versus other solids ratio, coarse tailings, and gravel contents were considered during the experiment design. Likewise, six experimental levels were given to each factor. Results of the test show that yield stress increased with the mass fraction and cement content. However, the trend reversed for the content of coarse tailings and gravel. Contribution of the four factors to yield stress in descending order is mass fraction > content of gravel > content of coarse tailings > cement versus other tailings ration. Effect of solid components on the yield stress of CPB is mainly due to the different flocculation structure inside the CPB. These various flow structures result in the different free‐water content of CPB, leading to a different yield stress value.