Stephan Schwarz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Stephan Schwarz has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Philipp Junker
Leibniz Universität Hannover
10 shared publications Klaus Hackl
Institute of Mechanics of Materials Ruhr-Universität Bochum Germany
6 shared publications- Klaus Hackl
Institute of Mechanics of Materials Ruhr‐Universitat Bochum Bochum Germany
4 shared publications - Dustin Roman Jantos
Institute of Continuum Mechanics Leibniz University Hannover Garbsen Germany
1 shared publication - Jerzy Makowski
Department of Political and Historical Geography, Faculty of Geography and Regional Studies , University of Warsaw , Warsaw , Poland
1 shared publication - Jochen Fröhlich
TU Dresden
1 shared publication
Latest Publications
- Open Access
- 24 May 2020
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 33 (1) , 69-95
Variational regularization of damage models based on the emulated RVE
Material models exhibiting softening effects due to damage or localization share the problem of leading to ill-posed boundary value problems that lead to physically meaningless, mesh-dependent finite element results. It is thus necessary to apply regularization techniques that couple local behavior, described, e.g., by internal variables, at a spatial level. The common way to do this is to take into account higher gradients of the field variables, thus introducing an internal length scale. In this paper, we suggest a different approach to regularization that does not make use of any nonlocal enhancement like the inclusion of higher gradients or integration over local sub-domains nor of any classical viscous effects. Instead we perform an appropriate relaxation of the (condensed) free energy in a time-incremental setting which leads to a modified energy that is coercive and satisfies quasiconvexity in an approximate way. Thus, in every time increment a regular boundary value problem is solved. The proposed approach holds the same advantage as other methods, but with less numerical effort. We start with the theoretical derivation, discuss a rate-independent version of the proposed model and present details of the numerical treatment. Finally, we give finite element results that demonstrate the efficiency of this new approach.
- 24 May 2020
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 33 (1) , 69-95
Open AccessVariational regularization of damage models based on the emulated RVE
Material models exhibiting softening effects due to damage or localization share the problem of leading to ill-posed boundary value problems that lead to physically meaningless, mesh-dependent finite element results. It is thus necessary to apply regularization techniques that couple local behavior, described, e.g., by internal variables, at a spatial level. The common way to do this is to take into account higher gradients of the field variables, thus introducing an internal length scale. In this paper, we suggest a different approach to regularization that does not make use of any nonlocal enhancement like the inclusion of higher gradients or integration over local sub-domains nor of any classical viscous effects. Instead we perform an appropriate relaxation of the (condensed) free energy in a time-incremental setting which leads to a modified energy that is coercive and satisfies quasiconvexity in an approximate way. Thus, in every time increment a regular boundary value problem is solved. The proposed approach holds the same advantage as other methods, but with less numerical effort. We start with the theoretical derivation, discuss a rate-independent version of the proposed model and present details of the numerical treatment. Finally, we give finite element results that demonstrate the efficiency of this new approach.
- Open Access
- 18 November 2019
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 19 (1) , e201900125
An Efficient Treatment of the Laplacian in a Gradient‐Enhanced Damage Model
As is well‐known, softening effects that are characteristic for damage models are accompanied by ill‐posed boundary value problems. This arises from non‐convex and non‐coercive energies and results in mesh‐dependent finite element results. For that reason, regularization strategies, which somehow take into account the non‐local behavior, have to be applied in order to prevent ill‐posedness and to achieve mesh‐independence. Hereto, most commonly gradient‐enhanced formulations [1, 2] are considered, but also integral‐type [3,4] and viscous [5,6] regularization are well‐known.Gradient‐enhanced damage models such as [1,2], to what group our new model [7] basically belongs, come along with a field function acting on the non‐local level. Two variational equations are resulting and, however, usually the number of nodal unknowns is increased and consequently the numerical effort is increased as well.In contrast, we present an improved algorithm for brittle damage [7] combining finite element and meshless methods resulting in a quick update of the field function. Thereby, an efficient evaluation of the Laplace operator is applied as introduced in [8]. In the end, the numerical effort of the novel approach is almost comparable with an elastic problem while maintaining well‐posedness and therefore mesh‐independent results.
- 18 November 2019
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 19 (1) , e201900125
Open AccessAn Efficient Treatment of the Laplacian in a Gradient‐Enhanced Damage Model
As is well‐known, softening effects that are characteristic for damage models are accompanied by ill‐posed boundary value problems. This arises from non‐convex and non‐coercive energies and results in mesh‐dependent finite element results. For that reason, regularization strategies, which somehow take into account the non‐local behavior, have to be applied in order to prevent ill‐posedness and to achieve mesh‐independence. Hereto, most commonly gradient‐enhanced formulations [1, 2] are considered, but also integral‐type [3,4] and viscous [5,6] regularization are well‐known.Gradient‐enhanced damage models such as [1,2], to what group our new model [7] basically belongs, come along with a field function acting on the non‐local level. Two variational equations are resulting and, however, usually the number of nodal unknowns is increased and consequently the numerical effort is increased as well.In contrast, we present an improved algorithm for brittle damage [7] combining finite element and meshless methods resulting in a quick update of the field function. Thereby, an efficient evaluation of the Laplace operator is applied as introduced in [8]. In the end, the numerical effort of the novel approach is almost comparable with an elastic problem while maintaining well‐posedness and therefore mesh‐independent results.
- 1 January 2019
- Published by Begell House Inc. Publishers in International Journal for Multiscale Computational Engineering
- Vol. 17 (2) , 151-180
A FAST AND ROBUST NUMERICAL TREATMENT OF A GRADIENT-ENHANCED MODEL FOR BRITTLE DAMAGE
Damage processes are modeled by a softening behavior in a stress/strain diagram. This reveals that the stiffness loses its ellipticity and the energy is thus not coercive. A numerical implementation of such ill-posed problems yields results that are strongly dependent on the chosen spatial discretization. Consequently, regularization strategies have to be employed that render the problem well-posed. A prominent method for regularization is a gradient enhancement of the free energy. This, however, results in field equations that have to be solved in parallel to the Euler-Lagrange equation for the displacement field. An usual finite element treatment thus deals with an increased number of nodal unknowns, which remarkably increases numerical costs. We present a gradient-enhanced material model for brittle damage using Hamilton's principle for nonconservative continua. We propose an improved algorithm, which is based on a combination of the finite element and strategies from meshless methods, for a fast update of the field function. This treatment keeps the numerical effort limited and close to purely elastic problems. Several boundary value problems prove the mesh-independence of the results.
- 1 January 2019
- Published by Begell House Inc. Publishers in International Journal for Multiscale Computational Engineering
- Vol. 17 (2) , 151-180
A FAST AND ROBUST NUMERICAL TREATMENT OF A GRADIENT-ENHANCED MODEL FOR BRITTLE DAMAGE
Damage processes are modeled by a softening behavior in a stress/strain diagram. This reveals that the stiffness loses its ellipticity and the energy is thus not coercive. A numerical implementation of such ill-posed problems yields results that are strongly dependent on the chosen spatial discretization. Consequently, regularization strategies have to be employed that render the problem well-posed. A prominent method for regularization is a gradient enhancement of the free energy. This, however, results in field equations that have to be solved in parallel to the Euler-Lagrange equation for the displacement field. An usual finite element treatment thus deals with an increased number of nodal unknowns, which remarkably increases numerical costs. We present a gradient-enhanced material model for brittle damage using Hamilton's principle for nonconservative continua. We propose an improved algorithm, which is based on a combination of the finite element and strategies from meshless methods, for a fast update of the field function. This treatment keeps the numerical effort limited and close to purely elastic problems. Several boundary value problems prove the mesh-independence of the results.
- 17 December 2018
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 18 (1)
On a relaxation‐based and time‐incremental approach to damage modeling
Damage models, which are characterized by softening effects, suffer from ill‐posed boundary value problems that result in mesh‐dependent finite‐element results. Regularization strategies counteract these problems by taking into account the non‐local behavior such as realized by the gradient‐enhanced formulation presented in [1]. Two variational equations are resulting at the expense of numerical effort but, however, mesh‐independent finite‐element results are provided. In contrast, we present a novel approach to the regularization of damage processes based on relaxed energies of two‐state models that are formulated in a time‐incremental way. The energies within each time step remain convex but the overall behavior is non‐coercive in order to maintain the characteristic stress‐behavior of damage models. Therefore, mesh‐independent results with less numerical effort are achieved.
- 17 December 2018
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 18 (1)
On a relaxation‐based and time‐incremental approach to damage modeling
Damage models, which are characterized by softening effects, suffer from ill‐posed boundary value problems that result in mesh‐dependent finite‐element results. Regularization strategies counteract these problems by taking into account the non‐local behavior such as realized by the gradient‐enhanced formulation presented in [1]. Two variational equations are resulting at the expense of numerical effort but, however, mesh‐independent finite‐element results are provided. In contrast, we present a novel approach to the regularization of damage processes based on relaxed energies of two‐state models that are formulated in a time‐incremental way. The energies within each time step remain convex but the overall behavior is non‐coercive in order to maintain the characteristic stress‐behavior of damage models. Therefore, mesh‐independent results with less numerical effort are achieved.
- Open Access
- 1 December 2018
- Published by Walter de Gruyter GmbH in Journal of the Mechanical Behavior of Materials
- Vol. 27 (5-6)
The effect of plasticity on damage evolution using a relaxation-based material model
As damage occurs in the context of high stresses that are also related to the presence of plastic strains, it is natural to investigate the effect of plasticity on damage evolution and to thus achieve a more realistic model. In this work, the existing and new damage model presented in [Junker P, Schwarz S, Makowski J, Hackl K. Continuum Mech. Therm. 2017, 29 (1), 291–310] is enhanced with plasticity and isotropic hardening. The damage model is based on a relaxation-based approach and does not require additional complex regularization techniques besides considering viscous effects. The benefit of the model are mesh-independent results for the rate-dependent case, even without considering, e.g. gradient terms for mathematical regularization. The enhancement with plasticity and isotropic hardening was investigated for a representative volume element that considerd a damaging matrix material and non-damaging hard precipitates. Two different loading types, pure tension and pure shear, yielded the homogenized stress/strain response for the material at various loading rates. Hereto, several finite discretizations in terms of finite-element meshes were used. The results underline the mesh-independence for physically reasonable loading rates and viscosities.
- 1 December 2018
- Published by Walter de Gruyter GmbH in Journal of the Mechanical Behavior of Materials
- Vol. 27 (5-6)
Open AccessThe effect of plasticity on damage evolution using a relaxation-based material model
As damage occurs in the context of high stresses that are also related to the presence of plastic strains, it is natural to investigate the effect of plasticity on damage evolution and to thus achieve a more realistic model. In this work, the existing and new damage model presented in [Junker P, Schwarz S, Makowski J, Hackl K. Continuum Mech. Therm. 2017, 29 (1), 291–310] is enhanced with plasticity and isotropic hardening. The damage model is based on a relaxation-based approach and does not require additional complex regularization techniques besides considering viscous effects. The benefit of the model are mesh-independent results for the rate-dependent case, even without considering, e.g. gradient terms for mathematical regularization. The enhancement with plasticity and isotropic hardening was investigated for a representative volume element that considerd a damaging matrix material and non-damaging hard precipitates. Two different loading types, pure tension and pure shear, yielded the homogenized stress/strain response for the material at various loading rates. Hereto, several finite discretizations in terms of finite-element meshes were used. The results underline the mesh-independence for physically reasonable loading rates and viscosities.
- 1 December 2017
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 17 (1) , 275-276
The coupling of plasticity with a relaxation‐based approach to damage modeling
Since damage occurs in context of high stresses that are also related to the development of plastic strains, it is natural to couple damage and plasticity phenomena to achieve a more realistic model. Hereto, the new damage model presented in [2] was used and enhanced with plasticity and isotropic hardening, as first shown in [1]. Thereby, the damage model is based on a new regularization approach and provides mesh‐independent results. In order to achieve mesh‐independence, damage models usually take into account the non‐local behavior by using a field function that couples the local damage parameter to a non‐local level, in which differences between the local and non‐local parameter as well as the gradient of the non‐local parameter can be penalized [3]. In contrast, the new regularization approach no longer needs a non‐local level at the finite element scale but directly provides mesh‐independent results. Due to the new variational approach, we are also able to improve the calculation times and convergence behavior. Furthermore, the enhancement with plasticity and isotropic hardening allows to investigate the influences between damage and plastic strains to each other as well as the resulting influences to the cracks.
- 1 December 2017
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 17 (1) , 275-276
The coupling of plasticity with a relaxation‐based approach to damage modeling
Since damage occurs in context of high stresses that are also related to the development of plastic strains, it is natural to couple damage and plasticity phenomena to achieve a more realistic model. Hereto, the new damage model presented in [2] was used and enhanced with plasticity and isotropic hardening, as first shown in [1]. Thereby, the damage model is based on a new regularization approach and provides mesh‐independent results. In order to achieve mesh‐independence, damage models usually take into account the non‐local behavior by using a field function that couples the local damage parameter to a non‐local level, in which differences between the local and non‐local parameter as well as the gradient of the non‐local parameter can be penalized [3]. In contrast, the new regularization approach no longer needs a non‐local level at the finite element scale but directly provides mesh‐independent results. Due to the new variational approach, we are also able to improve the calculation times and convergence behavior. Furthermore, the enhancement with plasticity and isotropic hardening allows to investigate the influences between damage and plastic strains to each other as well as the resulting influences to the cracks.
- 25 October 2016
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 16 (1) , 173-174
A relaxation‐based approach to damage modeling
Common material models that take into account softening effects due to damage have the problem of ill‐posed boundary value problems if no regularization is applied. This condition leads to a non‐unique solution for the resulting algebraic system and a strong mesh dependence of the numerical results. A possible solution approach to prevent this problem is to apply regularization techniques that take into account the non‐local behavior of the damage [1]. For this purpose a field function is often used to couple the local damage parameter to a non‐local level, in which differences between the local and non‐local parameter as well as the gradient of the non‐local parameter can be penalized. In contrast, we present a novel approach [2] to regularization that no longer needs a non‐local level but directly provides mesh‐independent results. Due to the new variational approach we are also able to improve the calculation times and convergence behavior.
- 25 October 2016
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 16 (1) , 173-174
A relaxation‐based approach to damage modeling
Common material models that take into account softening effects due to damage have the problem of ill‐posed boundary value problems if no regularization is applied. This condition leads to a non‐unique solution for the resulting algebraic system and a strong mesh dependence of the numerical results. A possible solution approach to prevent this problem is to apply regularization techniques that take into account the non‐local behavior of the damage [1]. For this purpose a field function is often used to couple the local damage parameter to a non‐local level, in which differences between the local and non‐local parameter as well as the gradient of the non‐local parameter can be penalized. In contrast, we present a novel approach [2] to regularization that no longer needs a non‐local level but directly provides mesh‐independent results. Due to the new variational approach we are also able to improve the calculation times and convergence behavior.
- 3 October 2016
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 29 (1) , 291-310
A relaxation-based approach to damage modeling
- 3 October 2016
- Published by Springer Nature in Continuum Mechanics and Thermodynamics
- Vol. 29 (1) , 291-310
A relaxation-based approach to damage modeling
- 21 October 2015
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 15 (1) , 151-152
A regularization approach for damage models based on a displacement gradient
- 21 October 2015
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 15 (1) , 151-152
A regularization approach for damage models based on a displacement gradient
- 22 December 2014
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 14 (1) , 151-152
Modeling and Simulation of Damage Processes based on a Gradient‐Enhanced Free Energy Function
- 22 December 2014
- Published by Wiley in Proceedings in Applied Mathematics and Mechanics
- Vol. 14 (1) , 151-152
Modeling and Simulation of Damage Processes based on a Gradient‐Enhanced Free Energy Function