MGMehmet Gulec

Mehmet Gulec

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mehmet Gulec has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Partial Discharge Prediction Model for Electric Motors With Enameled Flat Wire

    by Mohammed I. Elmezain, Mehmet Güleç, Peter Sergeant

    Recent high-specific-power electric machines (EMs) in automotive applications operate at elevated voltages and in harsh environmental conditions. The resulting electrical and thermal stress makes the winding insulation system vulnerable to premature failure due to partial discharge (PD) activity. The main objective of this article is the development and validation of a generalized finite element model (FEM)-based PD prediction model for enameled flat wires that can be accurately applied to different winding geometries. The PD prediction model is simulated for different insulation thicknesses and relative permittivity values based on the Schumann criterion and the Townsend discharge mechanism. To ensure model fidelity, the influence of environmental factors such as temperature, cooling oil, and impregnation material on the PD inception voltage (PDIV) is studied. Moreover, different electrical stresses, including switching frequency, rise time, and overshoot factor (OF), are considered. The experimental results obtained in this article are fit with the proposed model. The findings obtained from the combined FEM and experimental results approach provide essential guidance for designing robust, reliable insulation systems for next-generation electric powertrain applications.

  • Open Access

    Towards Faster E-Motor Deployment: A Fleet Digital Twin Approach for Predicting Efficiency Under Unseen Load Profiles

    by Muhammad Azeem, Mehmet Güleç, Karel Vanthuyne, Peter Sergeant

    The electric motor is the central component of the electric vehicle (EV) propulsion system, responsible for the energy conversion process that drives vehicle motion. Researchers involved in motor development often need to investigate the efficiency of electric motors under new load profiles prior to field deployment. However, experimental investigations during the product development phase are time-consuming and costly. This paper proposes a novel approach called Fleet Digital Twin (FDT) to predict the efficiency of electric motors under new load profiles, ones that have not yet been tested on the physical assets. The contribution of this paper is to consider several physical setups to create the FDT. To achieve this goal, five experimental setups of electrical drivetrains, each consisting of permanent magnet synchronous motors (PMSMs), were manufactured and deployed at different locations. The data from all setups was collected on a centralized cloud platform. Data from four of the setups was used to develop the FDT, while data from the fifth setup was reserved exclusively for validation. The FDT parameters were derived through an optimization study using time-domain data from the measured load profiles. Unlike a traditional digital twin based on a single prototype, this FDT is developed based on multiple field-deployed products, capturing critical variations arising from manufacturing tolerances, component aging, and differing operating conditions. Results confirm that the proposed approach accurately assesses motor efficiency under new load profiles, supporting informed and rapid deployment decisions across fleets of electric vehicles.


  • Open Access

    Toward Accurate Partial Discharge Measurements Under Impulsive Pulse Voltages for Turn-to-Turn Insulation of Inverter-Fed Motors: Time Interval Selection, Frequency Investigation, and PD Pattern

    by Mehmet Güleç, Muhammad Azeem, Kotb B. Tawfiq, Ting Helmholdt-Zhu, Peter Sergeant

    This paper aims to provide keynotes to improve the partial discharge (PD) measurements of turn-to-turn insulation in inverter-fed motor windings. The first point is to investigate the time interval between the voltage steps during PD tests, an aspect which is rarely addressed in the literature. To enhance measurement accuracy, the impact of the time interval is analyzed when applying repetitive pulses with fast rise times, and practical recommendations are proposed. As second topic, the influence of switching frequency is compared for different frequencies with an equal number of pulses. The combined effects of switching frequency and time interval between each voltage step are thoroughly examined. Last point is to investigate PD patterns to assess their potential for use as post-processing indicators of insulation degradation. An experimental test cases are conduced with twisted pair samples with various insulation grades to obtain the keynotes.

  • Open Access

    A Comprehensive Study of Thermal and Performance Characteristics in Revamped Multiphase Synchronous Reluctance Machines

    by Kotb B. Tawfiq, Mehmet Güleç, Peter Sergeant, Hatem Zeineldin, Mohamed N. Ibrahim, Ahmed Al-Durra, Ehab F. El-Saadany

    This paper presents a comprehensive thermal analysis of a three-phase synchronous reluctance motor (SynRM) that has been converted into a five-phase machine using an innovative rewinding approach, providing a practical and cost-effective solution that eliminates the need for a new stator. The thermal behavior is carefully evaluated at both steady-state and transient scenarios, including rated and overload scenarios. The results reveal that the five-phase SynRM has just a 1°C temperature rise at specifics spots, retaining thermal performance similar to the original three-phase design. In addition to thermal studies, the rewound machine shows significant improvements in electromagnetic performance. The five-phase machine increases the average torque by 6.56% and reduces the torque ripple by 17.13% compared to the three-phase machine. Efficiency also improves slightly by 0.3% under rated conditions. Under fault situations, the five-phase machine provides 78% of the rated torque, compared to 43% for the three-phase arrangement. Furthermore, this paper investigates various slot/pole combinations of standard three-phase stators that can be adequately rewound to produce balanced five-phase winding, as well as the applicability of this rewinding approach to different machine types such as SynRMs and induction motors. Lastly, experimental validation supports these simulation results.


  • Open Access

    Selection of Magnet Wire Topologies With Reduced AC Losses for the Windings of Electric Drivetrains

    by Ahmed Selema, Mehmet Gulec, Mohamed N. Ibrahim, Ruud Sprangers, Peter Sergeant

    In high speed electrical machines, one of the main challenges that can be faced is the high frequency losses in the machine windings due to both skin and proximity effects. This paper studies the effect of using different types of magnet wires on the AC losses in the winding of high speed electric machines. Using finite element modelling (FEM), the conductors are subdivided into multiple strands to calculate the losses in each conductor and in each layer. Aiming at loss minimization, different arrangements are introduced and compared at a wide range of frequencies. Further, four coil designs are prototyped using different magnet wires or arrangements. Moreover, the design and performance are compared with highlighting the pros and cons of each case. Eventually, recommendations are provided based on the obtained results for a better selection of magnet wire.


  • Open Access

    Cost Minimization of a Permanent Magnet Eddy Current Brake by Multiobjective Particle Swarm Optimization Based on Nonlinear Reluctance Network Modeling

    by Mehmet Gulec, Pia Lindh, Metin Aydin, Juha Pyrhonen

    Design optimization of a permanent magnet eddy current brake (PM-ECB) is performed by applying multiobjective particle swarm optimization (MO-PSO) for cost minimization. A previously designed and patented PM-ECB is used as a reference model in the study. A quasi-3-dimensional (3D) analytical modeling approach based on a reluctance network considering the actual structure of the reference PM-ECB is proposed and verified. The Gauss–Seidel method is used as a nonlinear solver for the reluctance network modeling, and the braking torque is calculated considering both the skin effect and the armature reaction. Multiobjective optimization is developed by applying a particle swarm algorithm, and a 3D Pareto front is provided to demonstrate all non-dominating design points. Three cost functions, viz. rated braking torque, magnet mass, and magnetic flux density of the yoke, are selected as the objectives for the optimization problem, and the optimum design point is addressed in detail. The optimized design is validated by 3D-FEA and experiments. The results indicate that a 40% reduction in the magnet volume could be brought about by the optimized PM-ECB design with practically the same braking torque. Further, a 40% cost reduction in the optimized brake could be achieved compared with the reference one.


  • Design and Validation of an Unconventional 39-Slot PM Synchronous Motor With Asymmetric and Unbalanced AC Windings

    by Metin Aydin, Yucel Demir, Ersin Yolacan, Mehmet Gulec, Ayman M. El-Refaie

    One of the main issues in manufacturing rotors for integer slot surface-mounted permanent magnet (PM) synchronous motors is the rotor skew. Motor manufacturers typically prefer to avoid skewing due to the added complexity and the difficulty in controlling the accuracy of the skewing and achieving the required outcome. This article proposes a design that minimizes torque ripple without using any kind of skewing in the rotor using asymmetric ac windings with unconventional stator slot-pole combinations. First, feasible slot and pole combinations are reviewed for PM synchronous motors. Theory behind unconventional asymmetric and unbalanced ac winding PM motors is presented. A lumped-parameter magnetic equivalent circuit for such unconventional stator is provided for a 1.7-kW PM motor. Detailed 2-D finite element analysis (FEA) is performed and compared with the lumped parameter model. A prototype motor is manufactured, and open-circuit as well as full-load tests are performed. Good agreement between the analytical, FEA, and test results is obtained.


  • Magneto-Thermal Analysis of an Axial-Flux Permanent-Magnet-Assisted Eddy-Current Brake at High-Temperature Working Conditions

    by Mehmet Gulec, Metin Aydin, Janne Nerg, Pia Lindh, Juha J. Pyrhonen

    This paper proposes an analytic coupled magneto-thermal analysis of an axial-flux (AF) permanent-magnet-assisted (PMA) eddy-current brake (ECB) at high-temperature working conditions. In the topology investigated, permanent magnets (PMs) are placed into stator slot openings to increase the braking torque production capability. This modification enables to control the magnet flux by altering the DC excitation current. However, the utilization of PMs will make the construction vulnerable at high operating temperatures simply because the magnet properties and the brake capability are strongly dependent on temperature. Such problems require complex coupled multiphysics finite element analyses (FEA) to obtain the actual brake performance. The proposed approach offers a simple and effective solution that consists of magnetic and thermal models, which are coupled to each other in the time domain. The nonlinear electrical, magnetic and thermal properties are influenced by the temperature variation in time. An AF-PMA-ECB prototype is manufactured to validate the proposed coupled models and the experimental studies confirm that the proposed approach provides very practical results to determine the working conditions of the AF-PMA-ECB at high-temperature operations.