Muhammad Azeem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Muhammad Azeem has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Gulec
Department of Electromechanical, Systems and Metal Engineering, Ghent University, Ghent, Belgium
4 shared publications - Peter Sergeant
Ghent University
4 shared publications - Ahmed Hassan
Ghent University
1 shared publication - Guillaume Crevecoeur
Ghent University
1 shared publication - Karel Vanthuyne
Department of Electromechanical, Systems and Metal Engineering, Ghent University, Ghent, Belgium
1 shared publication - Kotb Basem Tawfiq
Department of Electromechanical, Systems and Metal Engineering, Ghent University, 9000 Ghent, Belgium
1 shared publication
Latest Publications
- Open Access
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
Towards Faster E-Motor Deployment: A Fleet Digital Twin Approach for Predicting Efficiency Under Unseen Load Profiles
The electric motor is the central component of the electric vehicle (EV) propulsion system, responsible for the energy conversion process that drives vehicle motion. Researchers involved in motor development often need to investigate the efficiency of electric motors under new load profiles prior to field deployment. However, experimental investigations during the product development phase are time-consuming and costly. This paper proposes a novel approach called Fleet Digital Twin (FDT) to predict the efficiency of electric motors under new load profiles, ones that have not yet been tested on the physical assets. The contribution of this paper is to consider several physical setups to create the FDT. To achieve this goal, five experimental setups of electrical drivetrains, each consisting of permanent magnet synchronous motors (PMSMs), were manufactured and deployed at different locations. The data from all setups was collected on a centralized cloud platform. Data from four of the setups was used to develop the FDT, while data from the fifth setup was reserved exclusively for validation. The FDT parameters were derived through an optimization study using time-domain data from the measured load profiles. Unlike a traditional digital twin based on a single prototype, this FDT is developed based on multiple field-deployed products, capturing critical variations arising from manufacturing tolerances, component aging, and differing operating conditions. Results confirm that the proposed approach accurately assesses motor efficiency under new load profiles, supporting informed and rapid deployment decisions across fleets of electric vehicles.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. PP, 1
Open AccessTowards Faster E-Motor Deployment: A Fleet Digital Twin Approach for Predicting Efficiency Under Unseen Load Profiles
The electric motor is the central component of the electric vehicle (EV) propulsion system, responsible for the energy conversion process that drives vehicle motion. Researchers involved in motor development often need to investigate the efficiency of electric motors under new load profiles prior to field deployment. However, experimental investigations during the product development phase are time-consuming and costly. This paper proposes a novel approach called Fleet Digital Twin (FDT) to predict the efficiency of electric motors under new load profiles, ones that have not yet been tested on the physical assets. The contribution of this paper is to consider several physical setups to create the FDT. To achieve this goal, five experimental setups of electrical drivetrains, each consisting of permanent magnet synchronous motors (PMSMs), were manufactured and deployed at different locations. The data from all setups was collected on a centralized cloud platform. Data from four of the setups was used to develop the FDT, while data from the fifth setup was reserved exclusively for validation. The FDT parameters were derived through an optimization study using time-domain data from the measured load profiles. Unlike a traditional digital twin based on a single prototype, this FDT is developed based on multiple field-deployed products, capturing critical variations arising from manufacturing tolerances, component aging, and differing operating conditions. Results confirm that the proposed approach accurately assesses motor efficiency under new load profiles, supporting informed and rapid deployment decisions across fleets of electric vehicles.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 117574-117584
Analyzing Flux-Switching and Vernier Permanent Magnet Machines Through Field Harmonic Theory: A Comparative Study
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 14, 117574-117584
Open AccessAnalyzing Flux-Switching and Vernier Permanent Magnet Machines Through Field Harmonic Theory: A Comparative Study
- Open Access
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 216684-216693
Toward Accurate Partial Discharge Measurements Under Impulsive Pulse Voltages for Turn-to-Turn Insulation of Inverter-Fed Motors: Time Interval Selection, Frequency Investigation, and PD Pattern
This paper aims to provide keynotes to improve the partial discharge (PD) measurements of turn-to-turn insulation in inverter-fed motor windings. The first point is to investigate the time interval between the voltage steps during PD tests, an aspect which is rarely addressed in the literature. To enhance measurement accuracy, the impact of the time interval is analyzed when applying repetitive pulses with fast rise times, and practical recommendations are proposed. As second topic, the influence of switching frequency is compared for different frequencies with an equal number of pulses. The combined effects of switching frequency and time interval between each voltage step are thoroughly examined. Last point is to investigate PD patterns to assess their potential for use as post-processing indicators of insulation degradation. An experimental test cases are conduced with twisted pair samples with various insulation grades to obtain the keynotes.
- 24 December 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 13, 216684-216693
Open AccessToward Accurate Partial Discharge Measurements Under Impulsive Pulse Voltages for Turn-to-Turn Insulation of Inverter-Fed Motors: Time Interval Selection, Frequency Investigation, and PD Pattern
This paper aims to provide keynotes to improve the partial discharge (PD) measurements of turn-to-turn insulation in inverter-fed motor windings. The first point is to investigate the time interval between the voltage steps during PD tests, an aspect which is rarely addressed in the literature. To enhance measurement accuracy, the impact of the time interval is analyzed when applying repetitive pulses with fast rise times, and practical recommendations are proposed. As second topic, the influence of switching frequency is compared for different frequencies with an equal number of pulses. The combined effects of switching frequency and time interval between each voltage step are thoroughly examined. Last point is to investigate PD patterns to assess their potential for use as post-processing indicators of insulation degradation. An experimental test cases are conduced with twisted pair samples with various insulation grades to obtain the keynotes.