AEAnthony Nkem Ede

Anthony Nkem Ede

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Anthony Nkem Ede has a total of 75 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental Investigation on the Strengthening of Reinforced Concrete Beams Using Externally Bonded and Near-Surface Mounted Natural Fibre Reinforced Polymer Composites—A Review

    by John Uduak Effiong, Anthony Nkem Ede

    Developing more resilient and sustainable physical infrastructure increases the demand for sustainable materials and strengthening approaches. Many investigations into strengthening RC beam structures have used either externally bonded (EB) or near-surface mounted (NSM) systems with synthetic fibre reinforced polymer composites. These synthetic fibres are unsustainable since they involve the use of nonrenewable resources and a large amount of energy. Research shows that natural fibre reinforced polymer (NFRP) composites may be an alternative to synthetic FRP composites in the strengthening of concrete beams. However, there is limited literature that validates their performance in various structural applications. Hence, the purpose of this paper is to explore the advances, prospects, and gaps of using EB/NSM NFRP techniques in strengthening concrete beams to provide areas for future research directions. The NSM FRP technique provides improved strengthening effects and mitigates the concerns associated with the EB system, based on a wider range of applications using synthetic FRPs. However, the NSM NFRP strengthening technique has been underutilized, though the EB NFRP system has been more commonly explored in reviewed studies. The knowledge gaps and areas for proposed future research directions are essential in developing work in emerging NFRPs and strengthening techniques for sustainable infrastructure.


  • Modelling the strength of cashew nutshell ash-cement-based concrete

    by Solomon Oyebisi, Hilary Owamah, Thamer Alomayri, Anthony Ede

    This study models the flexural strength of concrete modified with cashew nutshell ash (CNA) using reactivity index concepts. Cashew nutshell was valorised and its ash was used at 5, 10, 15 and 20 wt.% of cement via mix proportions of concrete grades C 25–40 targeted at 25–40 MPa at 28 days. The reactivity indexes (RIs) were evaluated based on the oxide compositions and chemical moduli of both the cement and CNA. The design mix parameters, water/binder and binder/aggregate ratios, and RIs were applied to model the flexural strength at 7–90 days’ curing. The results revealed that, at 28 and 90 days’ curing, the developed models yielded high precisions at 91 and 84% R2, respectively, hence indicating a good agreement. Moreover, there was a good relationship between these developed models and previous studies. Therefore, the flexural strength of concrete incorporating supplementary cementitious materials (SCMs) can be efficiently predicted via these developed models; this would save both time and money when carrying out the experimental works.


  • Slag-based geopolymer concrete incorporating ash: effects on thermal performance

    by Solomon Oyebisi, Anthony Ede, Festus Olutoge, Hilary Owamah, Tobit Igba

    The thermal performance (TP) of concrete structures is vital to the evaluation of the fire response. Thus, this study examined the thermal properties slag-based geopolymer concrete (GPC) incorporating corncob ash (CCA). Corncob was valorised and partially used as a substitution for slag under the ambient curing conditions. Sodium hydroxide (SH) solution and sodium silicate (SS) gel were used as alkaline activators at 12, 14, and 16 M concentrations. The TP of GPC was compared with that of Portland cement concrete (PCC). Thermal predictions were developed based on the thermal properties. Based on the findings, GPC exhibited lower thermal conductivity (TC) and thermal diffusivity (TD) with increasing specific heat capacity (SHC), indicating good thermal insulation properties (TIP) compared with PCC. The TIP increased with increasing CCA content in the mixture at all levels of alkaline activators. Thus, CCA improves the insulating capacity of the GPC. In addition, a good correlation exists between the GPC produced and thermal properties. These findings can be beneficial in the hot climate regions and utilised for structural insulating construction concrete. Finally, the proposed models can be used in the assessment of GPC structures incorporating supplementary cementitious materials (SCMs) to enhance the TIP of construction materials.


  • Open Access

    Optimising the Workability and Strength of Concrete Modified with Anacardium Occidentale Nutshell Ash

    by Solomon Oyebisi, Anthony Ede, Hilary Owamah, Tobit Igba, Oluwaseun Mark, Abimbola Odetoyan

    Strength failure persists both in structural and mechanical analysis. One of its prominent characteristics is the adequate provision for parameters that minimise or maximise strength objectives while satisfying boundary conditions. The previous optimisation of concrete strength usually neglects mix design mechanisms induced by optimisation. Recent efforts to accurately optimise the concrete compressive strength have factored in some of these mechanisms. However, optimising concrete strength modified with high silica and alumina precursors, and crucial mix design factors are rare. Consequently, this paper optimised the concrete workability and strength, incorporating binding, water/binder ratio, binder/aggregate ratio, and curing mechanisms using the Box–Behnken design approach (BBDA). A waste material, anacardium occidentale (cashew) nutshell ash, was valorised and used at 5, 10, and 15 wt.% of cement. The composites were made, cured and tested at 14–90 d. The results revealed a high precision between the experimental slump and the optimisation slump at 97% R2. In addition, a 5% increase in compressive strength was obtained compared with the target compressive strength. Besides, the correlation between the model equation obtained from this study and predictions of previous studies via BBDA yielded a strong relationship.


  • Open Access

    Energy Harvesting from Vibration of Structures-A Brief Review

    by A. O Odetoyan, A. N. Ede

    The shortage and high cost of energy in developing countries of the world has led to the search for other sources of electricity which are renewable and do not constitute to environmental hazards or pollution like fossil fuel. Also, the short life span of batteries which are used to power up important smart devices like the fire alarm makes searching for alternative sources all the more important. This has led to the recent interest in sustainable and renewable energy sources from water, sun, vibration, biological wastes etc. Harnessing energy from vibration amongst other renewable energy sources reduces fatigues in machineries, structures and control systems and effectively dissipates negative vibration energy from buildings, bridges, roads and various mechanical systems. This research paper provides a brief review on the current state of knowledge on the subject of harvesting energy from vibration. The review shows that harnessing renewable energy form vibration is feasible and has a great future.


  • Open Access

    Review of the mechanical and durability properties of natural fibre laminate-strengthened reinforced concrete beams

    by A N Ede, B Ben-Ejeagwu, A I Akpabot, S O Oyebisi, O M Olofinnade, O G Mark

    The brittle nature of concrete has always necessitated the need for various forms of reinforcement that will absorb the tensile stress that is responsible for cracking. Conventionally, steel rebar embedded in concrete, giving rise to reinforced concrete structures has turned out to be a composite material that has been most used for infrastructural development around the world. The ductility impacted on concrete by steel rebar has been very efficient, though reinforced concrete structures are prone to durability challenges when exposed to adverse environmental conditions. Most times, repairing deficient concrete structures is more economical and sustainable than total replacement. Various approaches have been successfully implemented around the world in strengthening weakening reinforced concrete structures, nevertheless, bonding of fiber reinforced polymer (FRP) composites to the soffit of weak beams is turning out to be a viable option. Of particular interest is the adoption of naturally occurring fibers for laminates used for beam strengthening. In this era of Sustainable Development Goals (SDGs), in which the world is striving to reduce the effects industrial productions on the environment, advances in adopting renewable materials is highly welcomed. This research reviews the past works on the use of natural fibre-based composites in strengthening deficient reinforced concrete beams. The outcome of this research will go a long way in contributing towards the achievement of the SDGs.


  • Open Access

    Review of recently characterized Nigeria timber species for structural applications

    by A N Ede, O A Olomu, A I Akpabot, S O Oyebisi

    The continuous rise of world population is putting much pressure on the housing and infrastructure stocks available to the society, thereby accentuating the need for more constructions and of course, more pressing demands on the depreciating natural resources. Today, the most used construction materials are concrete and steel, but the amount of pollutants deriving from their production has remained a source of great concern to the world. Finding solution to this environmental challenge has given rise to Sustainability Development Goals (SDGs), aimed at making the planet earth more conducive to living organisms. One of the viable approaches to reduce the high demand of construction industry on depreciating natural resources is the recourse to using more of renewable materials like timber. Timber is one of the few construction materials that have served all the ages of human lives in providing shelter. In this moment of pressing needs for more shelter and infrastructure, needed to make life more comfortable for man, the use of this renewable material must be sustained, but the strength characteristics must be known for more efficient and safe use. This research reviews recent characterization of some Nigerian timber species. This research emphasizes some good strength properties of recently reviewed Nigeria timber species, which will build the confidence of designers on safe judgment and choice of structural timber, help to reduce the cost of construction, thereby making residential houses more affordable to the lower class of the society. This will help to build a sustainable eco system for all.

  • Open Access

    The trend of collapse of buildings in concrete materials in Lagos State, Nigeria (2013-2019)

    by Anthony N. Ede, Akpabot I. Akpabot, Solomon O. Oyebisi, Oluwarotimi M. Olofinnade, Chukwueloka A. Okeke, Kehinde D. Oyeyemi, Emmanuel I. Ugwu, Fiyin Gambo

    Buildings are essential structures that provide mankind with accommodation in the form of offices, factories, residences, etc. Building Infrastructure aid to increase the Gross domestic product of nations by meeting the present needs as well as helping in the reduction of future deficiencies. Unfortunately, in developing countries like Nigeria, regular occurrence of collapse of buildings in concrete materials have dealt a terrible blow to the nation, leading to losses in the form of death and damage to properties. This study aims to show the trend within the period of 2013 to 2019. This study used statistical methods to assess the fatality rate, types of buildings affected, frequency of occurrences and the causative factors. The result indicates that the year2017 witnessed 14 collapse incidences making it the highest within the study period in Lagos state. Furthermore, 204 persons lost their lives in 2014, making it the highest within the period. The results obtained showed that the risk of collapse and fatality rises as the building height goes up and when unauthorized floors are added to an existing building.


  • Open Access

    The Nexus Between Religion, Environment and Community: The Case of a Nigerian Community

    by Solomon Isiorho, David Omole, Isaac Akinwumi, PraiseGod Emenike, Anthony Ede, Philips Aizebeokhai

    How much care should one have for planet Earth? Most religious groups see the Earth as a place or object that should be taken care of even though some have deified the Earth. Although some religious people think that caring for the Earth amounts to worship, we can show those of that mindset the common good that could accrue from working together. We look at a private Christian University in Ogun State, Nigeria and how it’s activities are working for the common good of the society.Increase in population leading to greater demand for resources, an increase in industrial waste generation and economic poverty levels, are challenges that geoscientists,  engineers and stakeholders could collaborate on to find solutions for the common good of the society. Several faculty members at this religious institution, Covenant University, Ota, Ogun State, Nigeria, are actively involved in environmental and sustainable research projects that would be important to the good of the general public, especially in the local and rural areas near the location of the University. Particularly, water availability and quality along with generation of waste and waste disposal being the top areas where Earth religious scientists/engineers working with the community could achieve a common good for the society.Several research works examine procurement of potable water, generation of waste, and how our actions, activities or inactivity could lead to environmental degradation, and adversely affect us now or in the near future. We discuss some of the ongoing research works and align them with religious text as a way of getting the skeptics to work together for the common good. “Then the Lord God took the man and put him in the garden to Eden to tend and keep it” (Genesis 2:15) and Jesus told his disciples to “Gather all the fragments that remain, so that nothing is lost” (John 6:12). The presence or lack of resources and human activities have significant health effect on the community. As part of an ongoing study, we are collaborating with the locals, tapping on their religious belief systems, using science and engineering to benefit the good of the society. The outcomes will be presented during the meetings.