Isaac Ibukun Akinwumi
Research Subjects
Research Interests
Isaac Ibukun Akinwumi has a total of 142 co-authors. Here are the top co-authors by number of shared publications:
- Anthony Nkem Ede
Department of Civil Engineering, Covenant University, Ota, Nigeria
4 shared publications - Promise Epelle
Department of Civil Engineering, Covenant University, Ota 112104, Nigeria
4 shared publications - Victor Ajayi
Department of Civil Engineering,Covenant University,Nigeria
4 shared publications - Adebanji Samuel Ogbiye
Department of Civil Engineering, Covenant University, Ota, Ogun State, Nigeria
3 shared publications Colin A. Booth
Architecture and the Built Environment, University of the West of England, United Kingdom
3 shared publications- Gobinath Ravindran
Symbiosis Center for Research and Innovation (SCRI), Symbiosis International (Deemed University), Pune, India
3 shared publications
Latest Publications
- 23 July 2026
- Published by Edward Elgar Publishing
- p. 401-404
Marine plastic waste
The global plastic pollution crisis poses significant environmental, social, and economic challenges. With annual plastic production exceeding 350 million metric tonnes, substantial waste, including 1.7 million tonnes entering oceans, highlights inadequate regulations, poor waste management, and reliance on single-use plastics. Plastic production, driven by low costs and high profit margins, supports essential industries such as packaging and construction but exacerbates pollution and resource depletion. Single-use plastics, with their short lifespan, dominate waste streams. Recycling infrastructure remains underfunded, with global recycling rates insufficient to curb pollution. Life Cycle Sustainability Assessment (LCSA) offers a comprehensive framework to evaluate the environmental, social, and economic impacts of plastics, emphasizing mitigation strategies such as increased recycling, bioplastics, and end-of-life energy recovery. Proactive measures, including reduced single-use plastics and expanded recycling efforts, are critical to mitigating near-permanent environmental contamination, safeguarding ecosystems, and addressing global sustainability goals. Further research is needed to support effective policy and local interventions.
- 23 July 2026
- Published by Edward Elgar Publishing
- p. 401-404
Marine plastic waste
The global plastic pollution crisis poses significant environmental, social, and economic challenges. With annual plastic production exceeding 350 million metric tonnes, substantial waste, including 1.7 million tonnes entering oceans, highlights inadequate regulations, poor waste management, and reliance on single-use plastics. Plastic production, driven by low costs and high profit margins, supports essential industries such as packaging and construction but exacerbates pollution and resource depletion. Single-use plastics, with their short lifespan, dominate waste streams. Recycling infrastructure remains underfunded, with global recycling rates insufficient to curb pollution. Life Cycle Sustainability Assessment (LCSA) offers a comprehensive framework to evaluate the environmental, social, and economic impacts of plastics, emphasizing mitigation strategies such as increased recycling, bioplastics, and end-of-life energy recovery. Proactive measures, including reduced single-use plastics and expanded recycling efforts, are critical to mitigating near-permanent environmental contamination, safeguarding ecosystems, and addressing global sustainability goals. Further research is needed to support effective policy and local interventions.
- Open Access
- 10 October 2024
- Published by Eurowaste SRL in Detritus
- Vol. 29  (29) , 120-134
SUSTAINABLE SOIL STABILIZATION OF ROAD PAVEMENT LAYERS USING WASTE MATERIALS: A MINI-REVIEW
The escalating generation of waste necessitates sustainable management strategies. This review explores the potential of waste materials as sustainable stabilizers for soil used in road construction. Conventional stabilizers like cement, while effective, comes with environmental drawbacks that should be addressed. Alternatively, diverse waste-based materials are being investigated as potential substitutes. Their usage in this regard contributes to lessen adverse ecological impact and improve soil properties at potentially low costs. Prior to the application of a specific soil stabilised with a specific waste material for a specific purpose, the potential risk of local environmental and health impacts from release and spreading of harmful substances due to leaching or escape of fugitive dust must be assessed and appropriate action (precautions, mitigating measures, changes of the soil/stabilizer mixture) must be taken when necessary to prevent unacceptable impacts. If properly managed, the utilization of waste materials for soil stabilization aligns with several United Nations Sustainable Development Goals (SDGs). By diverting waste from landfills and promoting their use in construction, this approach presents a win-win scenario for both economic and environmental sustainability. Further research and development efforts are crucial to optimize waste-based soil stabilization techniques, ensuring durable and eco-friendly pavements. These wastes ultimately improve strength of the target soil, however, careful consideration should be given to determine the performance of these wastes as stabilizers and to know what aspects would require mitigation to maximize the potential of these waste materials to be used for good, instead of causing more harm to the ecosystem.
- 10 October 2024
- Published by Eurowaste SRL in Detritus
- Vol. 29  (29) , 120-134
Open AccessSUSTAINABLE SOIL STABILIZATION OF ROAD PAVEMENT LAYERS USING WASTE MATERIALS: A MINI-REVIEW
The escalating generation of waste necessitates sustainable management strategies. This review explores the potential of waste materials as sustainable stabilizers for soil used in road construction. Conventional stabilizers like cement, while effective, comes with environmental drawbacks that should be addressed. Alternatively, diverse waste-based materials are being investigated as potential substitutes. Their usage in this regard contributes to lessen adverse ecological impact and improve soil properties at potentially low costs. Prior to the application of a specific soil stabilised with a specific waste material for a specific purpose, the potential risk of local environmental and health impacts from release and spreading of harmful substances due to leaching or escape of fugitive dust must be assessed and appropriate action (precautions, mitigating measures, changes of the soil/stabilizer mixture) must be taken when necessary to prevent unacceptable impacts. If properly managed, the utilization of waste materials for soil stabilization aligns with several United Nations Sustainable Development Goals (SDGs). By diverting waste from landfills and promoting their use in construction, this approach presents a win-win scenario for both economic and environmental sustainability. Further research and development efforts are crucial to optimize waste-based soil stabilization techniques, ensuring durable and eco-friendly pavements. These wastes ultimately improve strength of the target soil, however, careful consideration should be given to determine the performance of these wastes as stabilizers and to know what aspects would require mitigation to maximize the potential of these waste materials to be used for good, instead of causing more harm to the ecosystem.
- Open Access
- 2 September 2024
- Published by Eurowaste SRL in Detritus
- Vol. 28  (28) , 150-160
DESIGN OF LANDFILLS AND THE UTILIZATION OF WASTES AS SUSTAINABLE LINER MATERIALS: A MINI-REVIEW
Modern landfills, designed to minimize environmental and health risks, play a crucial role in solid waste disposal. Poorly managed municipal solid waste facilities have severe environmental consequences, prompting intervention and remediation. Landfill construction is not enough; regular maintenance is essential to prevent harm. Landfills' historical evolution reflects societal needs, technological advancements, and environmental awareness. The 20th century saw engineered landfills with practices like compaction, daily covering, and leachate collection. Despite progress in recycling and incineration, landfills remain dominant, posing challenges like methane emissions, leachate contamination, and land use. Research emphasizes integrating landfills with recycling, composting, and waste-to-energy technologies for a sustainable future. Engineered landfills are advantageous over dumpsites, in terms of groundwater and air protection, odor control, energy generation, and job creation. Seismic analysis of landfills addresses deformation and seismic reactivity, emphasizing proper liner construction to reduce seismic impact. Leachate, a potential environmental hazard, requires careful management with effective liners to prevent groundwater and soil pollution. Various materials, including fly ash, paper mill sludge, waste foundry sand, recycled concrete aggregate, rice husk ash, and plastic waste, are reviewed for landfill liners. Research shows these materials can offer effective barriers, reducing environmental impact and promoting sustainability. Future studies should continue exploring alternative materials, considering factors like strength, hydraulic conductivity, and environmental protection.
- 2 September 2024
- Published by Eurowaste SRL in Detritus
- Vol. 28  (28) , 150-160
Open AccessDESIGN OF LANDFILLS AND THE UTILIZATION OF WASTES AS SUSTAINABLE LINER MATERIALS: A MINI-REVIEW
Modern landfills, designed to minimize environmental and health risks, play a crucial role in solid waste disposal. Poorly managed municipal solid waste facilities have severe environmental consequences, prompting intervention and remediation. Landfill construction is not enough; regular maintenance is essential to prevent harm. Landfills' historical evolution reflects societal needs, technological advancements, and environmental awareness. The 20th century saw engineered landfills with practices like compaction, daily covering, and leachate collection. Despite progress in recycling and incineration, landfills remain dominant, posing challenges like methane emissions, leachate contamination, and land use. Research emphasizes integrating landfills with recycling, composting, and waste-to-energy technologies for a sustainable future. Engineered landfills are advantageous over dumpsites, in terms of groundwater and air protection, odor control, energy generation, and job creation. Seismic analysis of landfills addresses deformation and seismic reactivity, emphasizing proper liner construction to reduce seismic impact. Leachate, a potential environmental hazard, requires careful management with effective liners to prevent groundwater and soil pollution. Various materials, including fly ash, paper mill sludge, waste foundry sand, recycled concrete aggregate, rice husk ash, and plastic waste, are reviewed for landfill liners. Research shows these materials can offer effective barriers, reducing environmental impact and promoting sustainability. Future studies should continue exploring alternative materials, considering factors like strength, hydraulic conductivity, and environmental protection.
- Open Access
Soil Improvement Using Blends of Coal Ash and Plantain Peel Ash as Road Pavement Layer Materials
The management of waste and its environmental impact remains an issue. Thus, various strategies are being explored to mitigate this problem. For this research case, the ash of plantain peel and coal was harnessed to enhance soil for usage in designing road pavements. The form of the soil, as regards its plasticity and grain assortment, positions it as a sandy lean clay material. Geotechnical parameters of the natural soil were established before being treated with coal ash (CA) and plantain peel ash (PPA), and subjected to tests for the Atterberg limits, California bearing ratio (CBR) and compaction, as well as investigations pertaining to its crystallinity and morphology. These assessments showed that strength parameters of soil increased on adding CA and PPA. However, the inclusion of these admixtures should be conducted until optimal strength is achieved as seen in 9% CA + 6% PPA. The use of soil stabilised with CA and PPA is suitable for general fillings and embankments. These findings revealed that integrating CA and PPA together would have the potential of stabilising soil as pavement layer material while also eliminating the pollution that emerges from the improper disposal of coal and plantain peels from the environment.
Open AccessSoil Improvement Using Blends of Coal Ash and Plantain Peel Ash as Road Pavement Layer Materials
The management of waste and its environmental impact remains an issue. Thus, various strategies are being explored to mitigate this problem. For this research case, the ash of plantain peel and coal was harnessed to enhance soil for usage in designing road pavements. The form of the soil, as regards its plasticity and grain assortment, positions it as a sandy lean clay material. Geotechnical parameters of the natural soil were established before being treated with coal ash (CA) and plantain peel ash (PPA), and subjected to tests for the Atterberg limits, California bearing ratio (CBR) and compaction, as well as investigations pertaining to its crystallinity and morphology. These assessments showed that strength parameters of soil increased on adding CA and PPA. However, the inclusion of these admixtures should be conducted until optimal strength is achieved as seen in 9% CA + 6% PPA. The use of soil stabilised with CA and PPA is suitable for general fillings and embankments. These findings revealed that integrating CA and PPA together would have the potential of stabilising soil as pavement layer material while also eliminating the pollution that emerges from the improper disposal of coal and plantain peels from the environment.
- Open Access
- 16 December 2022
- Published by MDPI AG in Infrastructures
- Vol. 7  (12) , 172
Experimental Insight into the Containment of Plastic Waste in Cement-Stabilised Soil as a Road Pavement Layer Material
Plastic waste (PW) constitutes a nuisance to our environment despite several efforts to reduce, reuse and recycle it. This study experimentally explores the possibility of storing plastic waste within a cement-stabilised soil that can be used as a road pavement layer material without adversely affecting the geotechnical characteristics of the stabilised soil. The soil is an A-2-6 soil, according to classification by the American Association of State Highway and Transportation Officials (AASHTO). Compaction characteristics, the California bearing ratio (CBR) and the unconfined compressive strength (UCS) of soil with 10% cement were determined for the 0, 2, 5, 10 and 15% addition of PW. The cementing of soil particles, which played a vital role in enhancing its strength on the addition of cement, may have been activated by the pozzolanic reaction between cement and soil particles. However, the addition of PW to this cement-stabilised mix led to a decrease in strength parameters at all variations. The soil with 10% cement and 2% PW yielded higher strength when compared to other mix ratios with PW and is suitable for use as a layer material in road pavement construction. As a sustainable strategy for PW management in developing nations, the usage of PW in cement-stabilised soil layer is recommended.
- 16 December 2022
- Published by MDPI AG in Infrastructures
- Vol. 7  (12) , 172
Open AccessExperimental Insight into the Containment of Plastic Waste in Cement-Stabilised Soil as a Road Pavement Layer Material
Plastic waste (PW) constitutes a nuisance to our environment despite several efforts to reduce, reuse and recycle it. This study experimentally explores the possibility of storing plastic waste within a cement-stabilised soil that can be used as a road pavement layer material without adversely affecting the geotechnical characteristics of the stabilised soil. The soil is an A-2-6 soil, according to classification by the American Association of State Highway and Transportation Officials (AASHTO). Compaction characteristics, the California bearing ratio (CBR) and the unconfined compressive strength (UCS) of soil with 10% cement were determined for the 0, 2, 5, 10 and 15% addition of PW. The cementing of soil particles, which played a vital role in enhancing its strength on the addition of cement, may have been activated by the pozzolanic reaction between cement and soil particles. However, the addition of PW to this cement-stabilised mix led to a decrease in strength parameters at all variations. The soil with 10% cement and 2% PW yielded higher strength when compared to other mix ratios with PW and is suitable for use as a layer material in road pavement construction. As a sustainable strategy for PW management in developing nations, the usage of PW in cement-stabilised soil layer is recommended.
- 4 May 2022
- Published by Springer Nature
- p. 19-32
Rail Transport in Nigeria: Sustenance-Bound Prospects
- 4 May 2022
- Published by Springer Nature
- p. 19-32
Rail Transport in Nigeria: Sustenance-Bound Prospects
- Open Access
- 1 March 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1036  (1) , 012038
Suitability of using borrow pit soils collected from Southwestern Nigeria as landfill liners
Effective waste disposal system is essential in preventing the infiltration of leachate into the groundwater and in achieving the sustainable development goal of ensuring clean water. One of the ways to provide an adequate disposal system is through the provision and use of engineered landfills for waste containment instead of open dumps. Consequently, this study evaluates the suitability of using soils from six borrow pits collected from six states in Southwestern, Nigeria. To assess the suitability of the soils, laboratory tests were carried out to determine the index properties, mechanical and hydraulic properties of the collected soil samples. The results showed that the soil samples collected from the selected borrow pits in Ogun, Oyo and Ekiti States could be effectively employed for the containment of inert waste. In contrast, the soil samples collected from the selected borrow pits in Osun, Lagos and Ondo States needs to be improved such that their unconfined compressive strengths satisfy the standard requirement (≥200 kN/m2). This study provides readily accessible soil data for use by engineering professionals involved in selecting suitable soil for use as landfill liners in Southwestern, Nigeri.
- 1 March 2021
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1036  (1) , 012038
Open AccessSuitability of using borrow pit soils collected from Southwestern Nigeria as landfill liners
Effective waste disposal system is essential in preventing the infiltration of leachate into the groundwater and in achieving the sustainable development goal of ensuring clean water. One of the ways to provide an adequate disposal system is through the provision and use of engineered landfills for waste containment instead of open dumps. Consequently, this study evaluates the suitability of using soils from six borrow pits collected from six states in Southwestern, Nigeria. To assess the suitability of the soils, laboratory tests were carried out to determine the index properties, mechanical and hydraulic properties of the collected soil samples. The results showed that the soil samples collected from the selected borrow pits in Ogun, Oyo and Ekiti States could be effectively employed for the containment of inert waste. In contrast, the soil samples collected from the selected borrow pits in Osun, Lagos and Ondo States needs to be improved such that their unconfined compressive strengths satisfy the standard requirement (≥200 kN/m2). This study provides readily accessible soil data for use by engineering professionals involved in selecting suitable soil for use as landfill liners in Southwestern, Nigeri.
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 39, 834-838
Compaction and shear strength enhancement of weak soil by copper slag addition
- 1 January 2021
- Published by Elsevier in Materials Today: Proceedings
- Vol. 39, 834-838
Compaction and shear strength enhancement of weak soil by copper slag addition
- Open Access
- 29 December 2020
- Published by MDPI AG in Sustainability
- Vol. 13  (1) , 257
Appropriate Use of Lime in the Study of the Physicochemical Behaviour of Stabilised Lateritic Soil under Continuous Water Ingress
Lime stabilisation is one of the traditional methods of improving the engineering properties of lateritic soils for use as subgrade and foundation materials for the construction of road pavements and highway embankments. Understanding the mechanical performance of lime-stabilised lateritic subgrades in terms of their durability under continuous water ingress will improve environmental sustainability by conserving scarce natural resources and reducing the environmental impacts of repair and replacement of pavements. However, there are several conflicting reports on the durability of lime-stabilised soils subjected to continuous water ingress and harsh environmental conditions. Therefore, this paper evaluates the influence of leaching on the physicochemical behaviour and durability of lime-stabilised lateritic soil under continuous water ingress, simulating the typical experience in a tropical environment. Variations in the strength and durability of the lateritic soil at various lime contents (0, 2.5, 5, 7.5, 10, 15, and 20 wt.%) and soaking periods (3, 7, 14 and 28 days) were evaluated by performing the California bearing ratio tests before and after subjecting the lime-lateritic soil (LLS) samples to continuous leaching using two modified leaching cells. Furthermore, physicochemical analysis was performed to assess the variation of cation concentrations and changes in the physical properties of the pore fluid as the leaching time progressed from 3 to 28 days. The results show that the minimum strength reduction index of the soil corresponds to its lime stabilisation optimum (LSO). Electrical conductivity decreased monotonically and almost uniformly with an increase in leaching time, irrespective of lime content. So, too, was calcium concentration and to a lesser degree for pH and potassium concentration. Adverse changes in the physicochemical behaviour of the LLS samples occurred at lime contents below and slightly above the optimum lime content of the soil. Whereas permanent pozzolanic reactions occurred at lime contents above the LSO and thus resulted in a 45-fold increase in strength and durability. The results are significant for reducing the detrimental effect of the leaching-induced deterioration of flexible pavements founded on tropical floodplains.
- 29 December 2020
- Published by MDPI AG in Sustainability
- Vol. 13  (1) , 257
Open AccessAppropriate Use of Lime in the Study of the Physicochemical Behaviour of Stabilised Lateritic Soil under Continuous Water Ingress
Lime stabilisation is one of the traditional methods of improving the engineering properties of lateritic soils for use as subgrade and foundation materials for the construction of road pavements and highway embankments. Understanding the mechanical performance of lime-stabilised lateritic subgrades in terms of their durability under continuous water ingress will improve environmental sustainability by conserving scarce natural resources and reducing the environmental impacts of repair and replacement of pavements. However, there are several conflicting reports on the durability of lime-stabilised soils subjected to continuous water ingress and harsh environmental conditions. Therefore, this paper evaluates the influence of leaching on the physicochemical behaviour and durability of lime-stabilised lateritic soil under continuous water ingress, simulating the typical experience in a tropical environment. Variations in the strength and durability of the lateritic soil at various lime contents (0, 2.5, 5, 7.5, 10, 15, and 20 wt.%) and soaking periods (3, 7, 14 and 28 days) were evaluated by performing the California bearing ratio tests before and after subjecting the lime-lateritic soil (LLS) samples to continuous leaching using two modified leaching cells. Furthermore, physicochemical analysis was performed to assess the variation of cation concentrations and changes in the physical properties of the pore fluid as the leaching time progressed from 3 to 28 days. The results show that the minimum strength reduction index of the soil corresponds to its lime stabilisation optimum (LSO). Electrical conductivity decreased monotonically and almost uniformly with an increase in leaching time, irrespective of lime content. So, too, was calcium concentration and to a lesser degree for pH and potassium concentration. Adverse changes in the physicochemical behaviour of the LLS samples occurred at lime contents below and slightly above the optimum lime content of the soil. Whereas permanent pozzolanic reactions occurred at lime contents above the LSO and thus resulted in a 45-fold increase in strength and durability. The results are significant for reducing the detrimental effect of the leaching-induced deterioration of flexible pavements founded on tropical floodplains.
- Open Access
- 2 November 2020
- Published by MDPI AG in Infrastructures
- Vol. 5  (11) , 94
Ballast Contamination Mechanisms: A Criterial Review of Characterisation and Performance Indicators
Across the world, ballasted railway tracks are utilised extensively due to their cost efficiency, ease of drainage, and capacity to withstand cyclic imposed loadings from heavy trains. In spite of these benefits, the ballast is often considered as a flexible medium; as such, its continuous deterioration is largely disregarded. Geotechnical challenges such as ballast contamination in the form of particle fragmentation, deposition of weathered materials, upward pumping of clay and fines from underlayers, and coal intrusion have led to differential settlements and reduced drainability of tracks, thereby exacerbating track maintenance costs. This study reviews existing works of literature to expound on the mechanisms for ballast contamination and to highlight the fundamental parameters that guide the characterisation and performance evaluation of railway ballasts. The study shows that ballast fragmentation accounts for about 76% of commonly recorded contaminations, while it is also observed as the most critical to track stability. As such, a variety of indices and specifications for ballast gradation have been established worldwide to guide practice in ballast characterisation and performance evaluation. However, the mechanisms of ballast fragmentation and deterioration require further research to guide the improvement of contemporary guidelines, and mitigate the risk of abrupt track failures, especially in developing countries.
- 2 November 2020
- Published by MDPI AG in Infrastructures
- Vol. 5  (11) , 94
Open AccessBallast Contamination Mechanisms: A Criterial Review of Characterisation and Performance Indicators
Across the world, ballasted railway tracks are utilised extensively due to their cost efficiency, ease of drainage, and capacity to withstand cyclic imposed loadings from heavy trains. In spite of these benefits, the ballast is often considered as a flexible medium; as such, its continuous deterioration is largely disregarded. Geotechnical challenges such as ballast contamination in the form of particle fragmentation, deposition of weathered materials, upward pumping of clay and fines from underlayers, and coal intrusion have led to differential settlements and reduced drainability of tracks, thereby exacerbating track maintenance costs. This study reviews existing works of literature to expound on the mechanisms for ballast contamination and to highlight the fundamental parameters that guide the characterisation and performance evaluation of railway ballasts. The study shows that ballast fragmentation accounts for about 76% of commonly recorded contaminations, while it is also observed as the most critical to track stability. As such, a variety of indices and specifications for ballast gradation have been established worldwide to guide practice in ballast characterisation and performance evaluation. However, the mechanisms of ballast fragmentation and deterioration require further research to guide the improvement of contemporary guidelines, and mitigate the risk of abrupt track failures, especially in developing countries.