John Kabuba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
John Kabuba has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Trésor Lukusa
Department of Chemical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Private bag X021, Vanderbijlpark 1900, South Africa
3 shared publicationsA. Ochieng
Botswana International University of Science and Technology, Palapye, Botswana
1 shared publication- Andani Valentia Maliehe
Department of Chemical Engineering, Faculty of Engineering and Technology, Vaal University of Technology, Vanderbijlpark, Private Bag X021, South Africa
1 shared publication - Antoine Floribert Mulaba-Bafubiandi
Department of Metallurgy and Materials Engineering, University of Johannesburg DFC, Johannesburg, South Africa
1 shared publication Antoine Mulaba-Bafubiandi
University of Johannesburg
1 shared publication- Ayo Samuel Afolabi
University of South Africa
1 shared publication
Latest Publications
- Open Access
- 5 November 2026
- Published by Springer Nature in Chemistry Africa
- Vol. 9 (9)
Integrated Lime–Soda Ash Softening and Vacuum Distillation for Sustainable Zero-Liquid-Discharge Treatment of Flue Gas Desulfurization Wastewater
- 5 November 2026
- Published by Springer Nature in Chemistry Africa
- Vol. 9 (9)
Open AccessIntegrated Lime–Soda Ash Softening and Vacuum Distillation for Sustainable Zero-Liquid-Discharge Treatment of Flue Gas Desulfurization Wastewater
- 9 April 2026
- Published by Wiley in Chemical Engineering & Technology
- Vol. 49 (4)
Activated Carbon From Tithonia diversifolia for Purifying and Decolorizing Food Liquids
The present study examines the possibility of producing activated carbon (AC) from Tithonia diversifolia suitable for purifying and decolorizing common food liquids. T. diversifolia was subjected to chemical activation with H 2 SO 4 , followed by pyrolysis at 650°C for 30, 45, and 60 min, resulting in three distinct samples (CA30, CA45, and CA60). The samples were characterized by physicochemical parameters (iodine value, methylene blue value, carbonization yield, moisture content, ash content, fat content, and pH), and their adsorptive performance was evaluated by UV–Vis spectrophotometry. The results showed that the yield decreased with the carbonization time (from 30.8% to 16.3%), whereas the specific surface area and iodine value increased, reaching 605 m 2 /g and 761 mg/g. In conclusion, T. diversifolia proves to be a promising biomass to produce AC and efficient alternative to commercial adsorbents in the field of food liquid purification.
- 9 April 2026
- Published by Wiley in Chemical Engineering & Technology
- Vol. 49 (4)
Activated Carbon From Tithonia diversifolia for Purifying and Decolorizing Food Liquids
The present study examines the possibility of producing activated carbon (AC) from Tithonia diversifolia suitable for purifying and decolorizing common food liquids. T. diversifolia was subjected to chemical activation with H 2 SO 4 , followed by pyrolysis at 650°C for 30, 45, and 60 min, resulting in three distinct samples (CA30, CA45, and CA60). The samples were characterized by physicochemical parameters (iodine value, methylene blue value, carbonization yield, moisture content, ash content, fat content, and pH), and their adsorptive performance was evaluated by UV–Vis spectrophotometry. The results showed that the yield decreased with the carbonization time (from 30.8% to 16.3%), whereas the specific surface area and iodine value increased, reaching 605 m 2 /g and 761 mg/g. In conclusion, T. diversifolia proves to be a promising biomass to produce AC and efficient alternative to commercial adsorbents in the field of food liquid purification.
- Open Access
- 17 March 2025
- Published by MDPI AG in Preprints.org
Using Hydrochar Adsorption Material from Coal Waste and Sewage Sludge to Treat Pharmaceutical Wastewater: Review of Hydrothermal Carbonization
An efficient method for efficiently cleaning pharmaceutical wastewater and eliminating micro-contaminants is the production of hydrochar from coal waste and sewage sludge using hydrothermal carbonization (HTC) techniques. This procedure produces high-quality hydrochar, a potential adsorbent material for pharmaceutical wastewater treatment, by carefully converting coal waste and sewage sludge in proportions. This novel approach dramatically lowers the dangers to environmental health posed by excessive pharmaceutical pollutants. Essential elements include reaction temperature, reaction duration, feedstock qualities, pressure, total solids, solvents, catalyst composition, and a host of other biochemical and physicochemical parameters that all affect the quality of the hydrochar generated during HTC. To effectively remove pharmaceutical wastewater pollutants and lessen environmental concerns, this paper carefully reviews the use of hydrochar, an adsorbent made from particular ratios of sewage sludge (SS) and coal waste (CW).
- 17 March 2025
- Published by MDPI AG in Preprints.org
Open AccessUsing Hydrochar Adsorption Material from Coal Waste and Sewage Sludge to Treat Pharmaceutical Wastewater: Review of Hydrothermal Carbonization
An efficient method for efficiently cleaning pharmaceutical wastewater and eliminating micro-contaminants is the production of hydrochar from coal waste and sewage sludge using hydrothermal carbonization (HTC) techniques. This procedure produces high-quality hydrochar, a potential adsorbent material for pharmaceutical wastewater treatment, by carefully converting coal waste and sewage sludge in proportions. This novel approach dramatically lowers the dangers to environmental health posed by excessive pharmaceutical pollutants. Essential elements include reaction temperature, reaction duration, feedstock qualities, pressure, total solids, solvents, catalyst composition, and a host of other biochemical and physicochemical parameters that all affect the quality of the hydrochar generated during HTC. To effectively remove pharmaceutical wastewater pollutants and lessen environmental concerns, this paper carefully reviews the use of hydrochar, an adsorbent made from particular ratios of sewage sludge (SS) and coal waste (CW).
- Open Access
- 27 June 2024
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 22 (5) , 2905-2916
Removal of Ni(II) from aqueous solution using chemically modified cellulose nanofibers derived from orange peels
Orange peel waste is generally of low economic value even though it contains components such as cellulose which can be utilised to produce nanocellulose adsorbents for wastewater remediation. This study was aimed at improving the chemical and physical properties of cellulose nanofibers derived from modified orange peel (OP) biosorbent. The OP was chemically modified using Phosphoric acid (POP) and Sodium hydroxide (NaOP) and applied for the removal of Ni(II) contained in wastewater. Biosorbent characterisation using Fourier transform infrared spectrometer revealed the presence of acidic carboxyl groups, the principal ligands responsible for metal binding. Increased crystallinity due to chemical treatment was confirmed by X-ray diffraction, while Transmission Electron microscopy and Scanning electron microscopy analyses confirmed the formation of nanofibers. The raw and modified orange peel fibres had surface areas of 0.948 m2/g and 1.428 m2/g, respectively, obtained from the Brunauer–Emmett–Teller analyser. From the batch adsorption studies, the optimum pH values were between 5 and 6, equilibrium was reached within one hour and thirty minutes for all the biosorbents, and the optimum adsorbent mass was 4 g/L. The Langmuir equation provided the best fit with maximum uptake capacities of 37.5, 21.08 and 8.4 mg/g for POP, NaOP, and OP, respectively. Compared to the raw orange peel, the adsorption capacities of the chemically modified orange peels were higher, with POP having the highest adsorption capacity of 37.5 mg/g.
- 27 June 2024
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 22 (5) , 2905-2916
Open AccessRemoval of Ni(II) from aqueous solution using chemically modified cellulose nanofibers derived from orange peels
Orange peel waste is generally of low economic value even though it contains components such as cellulose which can be utilised to produce nanocellulose adsorbents for wastewater remediation. This study was aimed at improving the chemical and physical properties of cellulose nanofibers derived from modified orange peel (OP) biosorbent. The OP was chemically modified using Phosphoric acid (POP) and Sodium hydroxide (NaOP) and applied for the removal of Ni(II) contained in wastewater. Biosorbent characterisation using Fourier transform infrared spectrometer revealed the presence of acidic carboxyl groups, the principal ligands responsible for metal binding. Increased crystallinity due to chemical treatment was confirmed by X-ray diffraction, while Transmission Electron microscopy and Scanning electron microscopy analyses confirmed the formation of nanofibers. The raw and modified orange peel fibres had surface areas of 0.948 m2/g and 1.428 m2/g, respectively, obtained from the Brunauer–Emmett–Teller analyser. From the batch adsorption studies, the optimum pH values were between 5 and 6, equilibrium was reached within one hour and thirty minutes for all the biosorbents, and the optimum adsorbent mass was 4 g/L. The Langmuir equation provided the best fit with maximum uptake capacities of 37.5, 21.08 and 8.4 mg/g for POP, NaOP, and OP, respectively. Compared to the raw orange peel, the adsorption capacities of the chemically modified orange peels were higher, with POP having the highest adsorption capacity of 37.5 mg/g.
- Open Access
- 23 December 2023
- Published by IWA Publishing in Water Practice & Technology
- Vol. 19 (1) , 213-227
Quantum adsorption mechanism of gelatin cellulose hydrogel for the effective removal of Cu2+ and Co2+ from wastewater using artificial neural networks
In this work, n-GCHM was used for the removal of Cu2+ and Co2+ from wastewater. The adsorbent material (n-GCHM) was characterised using SEM and TGA. The following optimum conditions were obtained: a contact time of 120 min and pH 5 for the removal of Cu2+ and Co2+. The maximum adsorption capacity of Cu2+ and Co2+ was 5.8343 mg/g using n-GCHM. The highest percentage removal of Cu2+ and Co2+ on n-GCHM at pH 5 was 80 and 80.5%, respectively. The experimental data successfully fitted to pseudo-second-order kinetic, and also fitted well to the Freundlich isotherm model. The process of adsorption was spontaneous and exothermic in nature. To obtain extensive information on the adsorption process of metal ions on the functional groups of adsorbents, the quantum adsorption mechanism was investigated using DFT. The molecular orbital approach has shown that the HOMO and LUMO were located on –NCN– and LUMO on –NCO–. The quantum adsorption mechanism has shown that the binding energies of Cu2+ and Co2+ on imine functional groups were −60,604.399 and −53649.06 eV, respectively. On the –NCO– functional group, the binding energy was −58587.608 and −51632.618 eV, respectively, for Cu2+ and Co2+. Quantum mechanical methods using the ANN approach have been demonstrated to be accurate.
- 23 December 2023
- Published by IWA Publishing in Water Practice & Technology
- Vol. 19 (1) , 213-227
Open AccessQuantum adsorption mechanism of gelatin cellulose hydrogel for the effective removal of Cu2+ and Co2+ from wastewater using artificial neural networks
In this work, n-GCHM was used for the removal of Cu2+ and Co2+ from wastewater. The adsorbent material (n-GCHM) was characterised using SEM and TGA. The following optimum conditions were obtained: a contact time of 120 min and pH 5 for the removal of Cu2+ and Co2+. The maximum adsorption capacity of Cu2+ and Co2+ was 5.8343 mg/g using n-GCHM. The highest percentage removal of Cu2+ and Co2+ on n-GCHM at pH 5 was 80 and 80.5%, respectively. The experimental data successfully fitted to pseudo-second-order kinetic, and also fitted well to the Freundlich isotherm model. The process of adsorption was spontaneous and exothermic in nature. To obtain extensive information on the adsorption process of metal ions on the functional groups of adsorbents, the quantum adsorption mechanism was investigated using DFT. The molecular orbital approach has shown that the HOMO and LUMO were located on –NCN– and LUMO on –NCO–. The quantum adsorption mechanism has shown that the binding energies of Cu2+ and Co2+ on imine functional groups were −60,604.399 and −53649.06 eV, respectively. On the –NCO– functional group, the binding energy was −58587.608 and −51632.618 eV, respectively, for Cu2+ and Co2+. Quantum mechanical methods using the ANN approach have been demonstrated to be accurate.
- Open Access
- 24 May 2023
- Published by IWA Publishing in Water Practice & Technology
- Vol. 18 (6) , 1479-1499
Removal of ammonia nitrogen from wastewater using activated carbon prepared from waste tyres
In this work, the removal of ammonia nitrogen (NH4-N) on activated carbon prepared from waste tyres was conducted in batch studies as a function of adsorbent dosage, pH, temperature, contact time and initial concentration. The pore structure of activated carbon was characterized by N2 adsorption. The optimal conditions for the efficient adsorption of ammonia nitrogen onto waste tyre-activated carbon were found to be an adsorbent dosage of 0.4 g/L, pH 9.0, temperature of 20 °C, contact time of 90 min and initial ammonium nitrogen concentration of 50 mg/L. The kinetics studies showed that the pseudo-second-order model offered the best connection of the adsorption data. The Langmuir model was found to provide the best fit for the experimental data. The thermodynamic results showed that the adsorption of ammonia onto waste tyre-activated carbon was exothermic, random and spontaneous in nature.
- 24 May 2023
- Published by IWA Publishing in Water Practice & Technology
- Vol. 18 (6) , 1479-1499
Open AccessRemoval of ammonia nitrogen from wastewater using activated carbon prepared from waste tyres
In this work, the removal of ammonia nitrogen (NH4-N) on activated carbon prepared from waste tyres was conducted in batch studies as a function of adsorbent dosage, pH, temperature, contact time and initial concentration. The pore structure of activated carbon was characterized by N2 adsorption. The optimal conditions for the efficient adsorption of ammonia nitrogen onto waste tyre-activated carbon were found to be an adsorbent dosage of 0.4 g/L, pH 9.0, temperature of 20 °C, contact time of 90 min and initial ammonium nitrogen concentration of 50 mg/L. The kinetics studies showed that the pseudo-second-order model offered the best connection of the adsorption data. The Langmuir model was found to provide the best fit for the experimental data. The thermodynamic results showed that the adsorption of ammonia onto waste tyre-activated carbon was exothermic, random and spontaneous in nature.
- Open Access
- 15 March 2023
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (12) , 13277-13288
Application of nonwoven microfiltration membrane on activated sludge final effluent: improving wastewater quality for reuse
The application of membrane technology in wastewater treatment for reuse is one of the alternatives to reduce the demand of water in domestic, agricultural and industrial sectors. This study attempts to improve wastewater quality effluent, prior to disinfection, for re-use. Clarifier effluent from a biological nutrient removal (BNR) treatment plant was diverted to a nonwoven membrane pilot filtration unit. It was thus positioned to further enhance the clarifier effluent as a polishing arrangement. Water Quality Index (WQI), Single Factor Pollution Index (Pi), Water Use License (WUL) and removal efficiency methods were used to interpret the water quality data for BNR clarifier effluent and nonwoven membrane permeate. The results showed that this nonwoven microfilter membrane is able to improve wastewater quality from BNR clarifier effluent. Escherichia coli (E. coli) reduction was the highest with a removal efficiency of 90%, followed by chemical oxygen demand 25%, NH4+ 22%, NO3− 12.6%, PO4 7.8%, suspended solids 6.3%. The lowest reduction was electrical conductivity of 5.2%. Permeate results indicated that physiochemical and microbial parameters were complying with the limits of WUL. Pi has revealed that BNR clarifier effluent water quality is medium polluted versus slightly polluted permeate. WQI results for BNR clarifier effluent showed good water quality and the water can be reused for domestic, irrigation and industrial purposes, while permeate WQI results indicated excellent water quality and the water can be reused for drinking, domestic, irrigation and industrial purposes. Outstanding permeate water quality improvement was observed on E.coli counts improving from 4974.48 to 294.33 counts/L. The standard of E.coli according to the WUL at this wastewater care works is 500 counts/L. Results indicate that nonwoven membrane filtration can improve microbial contamination and decrease the demand of chlorine for disinfection of wastewater final effluent. The nonwoven membrane filtration can decrease the water scarcity gap in South Africa for direct water reclamation by improving effluent wastewater.
- 15 March 2023
- Published by Springer Nature in International Journal of Environmental Science and Technology
- Vol. 20 (12) , 13277-13288
Open AccessApplication of nonwoven microfiltration membrane on activated sludge final effluent: improving wastewater quality for reuse
The application of membrane technology in wastewater treatment for reuse is one of the alternatives to reduce the demand of water in domestic, agricultural and industrial sectors. This study attempts to improve wastewater quality effluent, prior to disinfection, for re-use. Clarifier effluent from a biological nutrient removal (BNR) treatment plant was diverted to a nonwoven membrane pilot filtration unit. It was thus positioned to further enhance the clarifier effluent as a polishing arrangement. Water Quality Index (WQI), Single Factor Pollution Index (Pi), Water Use License (WUL) and removal efficiency methods were used to interpret the water quality data for BNR clarifier effluent and nonwoven membrane permeate. The results showed that this nonwoven microfilter membrane is able to improve wastewater quality from BNR clarifier effluent. Escherichia coli (E. coli) reduction was the highest with a removal efficiency of 90%, followed by chemical oxygen demand 25%, NH4+ 22%, NO3− 12.6%, PO4 7.8%, suspended solids 6.3%. The lowest reduction was electrical conductivity of 5.2%. Permeate results indicated that physiochemical and microbial parameters were complying with the limits of WUL. Pi has revealed that BNR clarifier effluent water quality is medium polluted versus slightly polluted permeate. WQI results for BNR clarifier effluent showed good water quality and the water can be reused for domestic, irrigation and industrial purposes, while permeate WQI results indicated excellent water quality and the water can be reused for drinking, domestic, irrigation and industrial purposes. Outstanding permeate water quality improvement was observed on E.coli counts improving from 4974.48 to 294.33 counts/L. The standard of E.coli according to the WUL at this wastewater care works is 500 counts/L. Results indicate that nonwoven membrane filtration can improve microbial contamination and decrease the demand of chlorine for disinfection of wastewater final effluent. The nonwoven membrane filtration can decrease the water scarcity gap in South Africa for direct water reclamation by improving effluent wastewater.
- Open Access
- 1 January 2023
- Published by EJournal Publishing in International Journal of Environmental Science and Development
- Vol. 14 (4) , 252-258
Process Optimization Using Response Surface Methodology for the Removal of Cu(II) and Co(II) from Aqueous Solution Using Gelatin-Cellulose Nanocrystals Hydrogel Membrane
- 1 January 2023
- Published by EJournal Publishing in International Journal of Environmental Science and Development
- Vol. 14 (4) , 252-258
Open AccessProcess Optimization Using Response Surface Methodology for the Removal of Cu(II) and Co(II) from Aqueous Solution Using Gelatin-Cellulose Nanocrystals Hydrogel Membrane
- Open Access
- 23 November 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 347, 00014
Neural Network for Modeling the Mechanical Properties of Gelatin-Cellulose Nanocrystals Hydrogel Membrane for Heavy Metal ions Removal from Wastewater
The mechanical properties of Gelatin-cellulose nanocrystals hydrogel membrane were investigated for the removal of heavy metal ions from wastewater. The membrane was characterized using Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR) analysis. Neural Network (NN) model was developed to predict the mechanical properties such as Young’s modulus, tensile strength, and elongation. The NN predicted results are very close to the experimental results with R2 = 0.99315. The predicted values were found to be in excellent agreement with the experimental data and the current model has a good learning precision and generalization. The results revealed that the developed model is very accurate.
- 23 November 2021
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 347, 00014
Open AccessNeural Network for Modeling the Mechanical Properties of Gelatin-Cellulose Nanocrystals Hydrogel Membrane for Heavy Metal ions Removal from Wastewater
The mechanical properties of Gelatin-cellulose nanocrystals hydrogel membrane were investigated for the removal of heavy metal ions from wastewater. The membrane was characterized using Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectroscopy (FTIR) analysis. Neural Network (NN) model was developed to predict the mechanical properties such as Young’s modulus, tensile strength, and elongation. The NN predicted results are very close to the experimental results with R2 = 0.99315. The predicted values were found to be in excellent agreement with the experimental data and the current model has a good learning precision and generalization. The results revealed that the developed model is very accurate.