Oruç Köklükaya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Oruç Köklükaya has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Lars Wågberg
Fibre and Polymer Technology, KTH Royal Institute of Technology, Stockholm, Sweden
5 shared publications Federico Carosio
Dipartimento di Scienza Applicata e Tecnologia, Politecnico di Torino, Alessandria Site Viale Teresa Michel 5, 15121, Alessandria, Italy
3 shared publications- Federico Carosio
Department of Applied Science and Technology, Politecnico di Torino, 10129 Torino, Italy
2 shared publications - Jaime C. Grunlan
Texas A&M University
1 shared publication Rose-Marie Pernilla Karlsson
Department of Fiber and Polymer Technology, KTH Royal Institute of Technology, Teknikringen 56, SE-100 44 Stockholm, Sweden; Wallenberg Wood Science Center, KTH Royal Institute of Technology, SE-100 44 Stockholm, Sweden
1 shared publication- Verónica López Durán
Fibre and Polymer Technology, KTH Royal Institute of Technology, Stockholm, Sweden
1 shared publication
Latest Publications
- Open Access
- 1 March 2021
- Published by Elsevier in Carbohydrate Polymers
- Vol. 255, 117468
The use of model cellulose gel beads to clarify flame-retardant characteristics of layer-by-layer nanocoatings
- 1 March 2021
- Published by Elsevier in Carbohydrate Polymers
- Vol. 255, 117468
Open AccessThe use of model cellulose gel beads to clarify flame-retardant characteristics of layer-by-layer nanocoatings
- 1 February 2020
- Published by Elsevier in Carbohydrate Polymers
- Vol. 230, 115616
Layer-by-layer modified low density cellulose fiber networks: A sustainable and fireproof alternative to petroleum based foams
- 1 February 2020
- Published by Elsevier in Carbohydrate Polymers
- Vol. 230, 115616
Layer-by-layer modified low density cellulose fiber networks: A sustainable and fireproof alternative to petroleum based foams
- Open Access
- 15 March 2018
- Published by Springer Nature in Cellulose
- Vol. 25 (4) , 2691-2709
Tailoring flame-retardancy and strength of papers via layer-by-layer treatment of cellulose fibers
- 15 March 2018
- Published by Springer Nature in Cellulose
- Vol. 25 (4) , 2691-2709
Open AccessTailoring flame-retardancy and strength of papers via layer-by-layer treatment of cellulose fibers
- 16 August 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (34) , 29082-29092
Superior Flame-Resistant Cellulose Nanofibril Aerogels Modified with Hybrid Layer-by-Layer Coatings
Nanometer thin films consisting of cationic chitosan (Ch), anionic poly(vinylphosphonic acid) (PVPA), and anionic montmorillonite clay (MMT) are deposited on highly porous, wet-stabilized cellulose nanofibril (CNF) aerogels via the layer-by-layer (LbL) technique. Model experiments with silicon oxide surfaces are used to study the details of LbL formation and the multilayer structure. Formation of layers on the aerogels is also investigated as a function of solution concentration by use of polyelectrolyte titration. Thermogravimetric analysis indicates that the LbL coating significantly improves thermal stability of the CNF aerogel. Horizontal flame test shows that aerogels coated with five quadlayers of Ch/PVPA/Ch/MMT, using solutions/dispersion of high concentration, are able to self-extinguish immediately after removal of flame, and LbL-coated aerogels do not ignite under heat flux (35 kW/m2) in cone calorimetry. The LbL-coated aerogel can prevent flame penetration from a torch focused on the surface, achieving temperature drops up to 650 °C across the 10 mm thick specimen for several minutes. LbL treatment is hence a rapid and highly effective way to specifically tailor the surface properties of CNF aerogels in order to confer unprecedented flame-retardant characteristics.
- 16 August 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (34) , 29082-29092
Superior Flame-Resistant Cellulose Nanofibril Aerogels Modified with Hybrid Layer-by-Layer Coatings
Nanometer thin films consisting of cationic chitosan (Ch), anionic poly(vinylphosphonic acid) (PVPA), and anionic montmorillonite clay (MMT) are deposited on highly porous, wet-stabilized cellulose nanofibril (CNF) aerogels via the layer-by-layer (LbL) technique. Model experiments with silicon oxide surfaces are used to study the details of LbL formation and the multilayer structure. Formation of layers on the aerogels is also investigated as a function of solution concentration by use of polyelectrolyte titration. Thermogravimetric analysis indicates that the LbL coating significantly improves thermal stability of the CNF aerogel. Horizontal flame test shows that aerogels coated with five quadlayers of Ch/PVPA/Ch/MMT, using solutions/dispersion of high concentration, are able to self-extinguish immediately after removal of flame, and LbL-coated aerogels do not ignite under heat flux (35 kW/m2) in cone calorimetry. The LbL-coated aerogel can prevent flame penetration from a torch focused on the surface, achieving temperature drops up to 650 °C across the 10 mm thick specimen for several minutes. LbL treatment is hence a rapid and highly effective way to specifically tailor the surface properties of CNF aerogels in order to confer unprecedented flame-retardant characteristics.
- 19 October 2015
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (42) , 23750-23759
Flame-Retardant Paper from Wood Fibers Functionalized via Layer-by-Layer Assembly
The highly flammable character of cellulose-rich fibers from wood limits their use in some advanced materials. To suppress the flammability and introduce flame-retardant properties to individual pulp fibers, we deposited nanometer thin films consisting of cationic chitosan (CH) and anionic poly(vinylphosphonic acid) (PVPA) on fibers using the layer-by-layer (LbL) technique. The buildup of the multilayer film was investigated in the presence and absence of salt (NaCl) using model cellulose surfaces and a quartz crystal microbalance technique. Fibers were then treated with the same strategy, and the treated fibers were used to prepare paper sheets. A horizontal flame test (HFT) and cone calorimetry were conducted to evaluate the combustion behavior of paper sheets as a function of the number of bilayers deposited on fibers. In HFT, paper made of fibers coated with 20 CH/PVPA bilayers (BL), self-extinguished the flame, while uncoated fibers were completely consumed. Scanning electron microscopy of charred pa...
- 19 October 2015
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (42) , 23750-23759
Flame-Retardant Paper from Wood Fibers Functionalized via Layer-by-Layer Assembly
The highly flammable character of cellulose-rich fibers from wood limits their use in some advanced materials. To suppress the flammability and introduce flame-retardant properties to individual pulp fibers, we deposited nanometer thin films consisting of cationic chitosan (CH) and anionic poly(vinylphosphonic acid) (PVPA) on fibers using the layer-by-layer (LbL) technique. The buildup of the multilayer film was investigated in the presence and absence of salt (NaCl) using model cellulose surfaces and a quartz crystal microbalance technique. Fibers were then treated with the same strategy, and the treated fibers were used to prepare paper sheets. A horizontal flame test (HFT) and cone calorimetry were conducted to evaluate the combustion behavior of paper sheets as a function of the number of bilayers deposited on fibers. In HFT, paper made of fibers coated with 20 CH/PVPA bilayers (BL), self-extinguished the flame, while uncoated fibers were completely consumed. Scanning electron microscopy of charred pa...