Henrique Costa Braga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Henrique Costa Braga has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Gray Farias Moita
Centro Federal de Educação Tecnológica de Minas Gerais, Brasil
10 shared publications - Paulo Eduardo Maciel Almeida
Instituto de Telecomunicações, Departamento de Engenharia Electrotécnica e de Computadores, Universidade de Coimbra, 3030-290, Portugal
4 shared publications - Sidney Nicodemos da Silva
Centro Federal de Educação Tecnológica de Minas Gerais, Brasil
4 shared publications - Elaine Carballo Siqueira Corrêa
Centro Federal de Educação Tecnológica de Minas Gerais, Brasil
3 shared publications Gray F. Moita
Centro Federal de Educação Tecnológica de Minas Gerais, CEFET-MG
2 shared publicationsGray Moita
CEFET-MG
2 shared publications
Latest Publications
- 1 September 2026
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 34 (6) , 065017
A restricted-face approach for surface area estimation in 3D voxel-based microstructural simulations
Reliable surface area estimation remains a practical bottleneck in three-dimensional voxel-based microstructural models, particularly in metallurgical problems governed by interfacial phenomena. While grain volume can be computed directly from voxel counts with minimal ambiguity, surface measures derived from digital lattices are not unique and often exhibit systematic bias and orientation dependence. This work proposes a calibrated restricted-face framework for grain surface area estimation in 3D voxel-based growth models. Three surface definitions are examined: (i) equivalent surface area inferred from volume under a spherical assumption, (ii) full-face surface area based on exposed voxel faces, and (iii) a restricted-face proxy derived from 6-neighborhood surface-voxel classification. The restricted-face approach provides an orientation-robust and computationally efficient estimator of interfacial extent, with its systematic underestimation corrected through a single dimensionless proportionality constant obtained from analytical benchmarks. Validation against analytical solutions for spheres and spheroids in 201 3 lattices shows that corrected estimates achieve deviations on the order of ±10% across the tested size and orientation ranges. Application to polycrystalline simulations in 200 3 lattices with 1000 randomly distributed nuclei yields statistically consistent surface-area distributions and captures the expected increase in interfacial measures under anisotropic growth. Overall, the proposed framework provides a practical and scalable solution for surface-dependent analyses in voxel-based microstructural simulations.
- 1 September 2026
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 34 (6) , 065017
A restricted-face approach for surface area estimation in 3D voxel-based microstructural simulations
Reliable surface area estimation remains a practical bottleneck in three-dimensional voxel-based microstructural models, particularly in metallurgical problems governed by interfacial phenomena. While grain volume can be computed directly from voxel counts with minimal ambiguity, surface measures derived from digital lattices are not unique and often exhibit systematic bias and orientation dependence. This work proposes a calibrated restricted-face framework for grain surface area estimation in 3D voxel-based growth models. Three surface definitions are examined: (i) equivalent surface area inferred from volume under a spherical assumption, (ii) full-face surface area based on exposed voxel faces, and (iii) a restricted-face proxy derived from 6-neighborhood surface-voxel classification. The restricted-face approach provides an orientation-robust and computationally efficient estimator of interfacial extent, with its systematic underestimation corrected through a single dimensionless proportionality constant obtained from analytical benchmarks. Validation against analytical solutions for spheres and spheroids in 201 3 lattices shows that corrected estimates achieve deviations on the order of ±10% across the tested size and orientation ranges. Application to polycrystalline simulations in 200 3 lattices with 1000 randomly distributed nuclei yields statistically consistent surface-area distributions and captures the expected increase in interfacial measures under anisotropic growth. Overall, the proposed framework provides a practical and scalable solution for surface-dependent analyses in voxel-based microstructural simulations.
- Open Access
- 26 March 2026
- Published by Brazilian Society for Computational and Applied Mathematics (SBMAC) in Trends in Computational and Applied Mathematics
- Vol. 27 (1)
Distance Map Associated with Tangent Search as a Pathfinder Strategy: achieving high-quality and safe route maps for crowed movement in built environments
Several human movement simulators employ pathfinder algorithms to determine the best route to an emergency exit or other targets within built environments. However, the literature often lacks detailed descriptions of some of these algorithms, particularly those of high quality. This paper introduces a new and enhanced pathfinder algorithm, VSP (Visibility Search Pathfinder), designed for movement simulations in built environments. It is based on the creation of Distance Maps and Route Maps generated by tangent search. The algorithm's logic is thoroughly detailed, with examples of its application. Key advantages of the VSP algorithm include simplicity of logic, ease of computational implementation, applicability to environments of any design or geometry, low processing time (in non-dynamic scenarios), and full automation, requiring no specialist input. The VSP algorithm consistently identifies routes that closely approximate the optimal paths, independent of the number of people in the environment. Furthermore, the VSP algorithm allows the creation of a region around obstacles that prevents collisions. Thus, the VSP becomes a valuable tool for high-quality human movement simulations in evacuation contexts or similar scenarios.
- 26 March 2026
- Published by Brazilian Society for Computational and Applied Mathematics (SBMAC) in Trends in Computational and Applied Mathematics
- Vol. 27 (1)
Open AccessDistance Map Associated with Tangent Search as a Pathfinder Strategy: achieving high-quality and safe route maps for crowed movement in built environments
Several human movement simulators employ pathfinder algorithms to determine the best route to an emergency exit or other targets within built environments. However, the literature often lacks detailed descriptions of some of these algorithms, particularly those of high quality. This paper introduces a new and enhanced pathfinder algorithm, VSP (Visibility Search Pathfinder), designed for movement simulations in built environments. It is based on the creation of Distance Maps and Route Maps generated by tangent search. The algorithm's logic is thoroughly detailed, with examples of its application. Key advantages of the VSP algorithm include simplicity of logic, ease of computational implementation, applicability to environments of any design or geometry, low processing time (in non-dynamic scenarios), and full automation, requiring no specialist input. The VSP algorithm consistently identifies routes that closely approximate the optimal paths, independent of the number of people in the environment. Furthermore, the VSP algorithm allows the creation of a region around obstacles that prevents collisions. Thus, the VSP becomes a valuable tool for high-quality human movement simulations in evacuation contexts or similar scenarios.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 29
Discrete Microstructural Pathway Modeling of Recrystallization Using Three-Dimensional Hybrid Cellular Automata
The quantitative analysis of recrystallization microstructures requires methodologies capable of describing interfacial evolution clearly and with minimal reliance on phenomenological assumptions. Although microstructural paths relating interfacial surface area density to transformed volume fraction are well-established in experimental and hybrid modeling studies, their determination commonly depends on analytical kinetic formulations or fitted parameters. In this work, a fully discrete formulation of the recrystallization microstructural path is proposed based on three-dimensional hybrid cellular automata simulations. All relevant descriptors, including the transformed volume fraction and the interfacial surface area density between recrystallized and non-recrystallized regions, are obtained directly from voxel-level geometric information, without invoking phenomenological kinetic equations or auxiliary correction factors. The methodology is applied to different growth geometries, encompassing classical face-based cellular automata growth as well as spherical and spheroidal grain growth within a hybrid framework. The resulting microstructural paths reproduce the characteristic non-monotonic behavior reported in experimental and computational studies in the literature. Comparative analyses show that grain morphology significantly influences microstructural path evolution, highlighting the importance of geometric assumptions in recrystallization modeling. The proposed approach provides a transparent and reproducible framework for analyzing recrystallization microstructures and offers an independent, geometry-based perspective that complements traditional kinetic descriptions.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 29
Open AccessDiscrete Microstructural Pathway Modeling of Recrystallization Using Three-Dimensional Hybrid Cellular Automata
The quantitative analysis of recrystallization microstructures requires methodologies capable of describing interfacial evolution clearly and with minimal reliance on phenomenological assumptions. Although microstructural paths relating interfacial surface area density to transformed volume fraction are well-established in experimental and hybrid modeling studies, their determination commonly depends on analytical kinetic formulations or fitted parameters. In this work, a fully discrete formulation of the recrystallization microstructural path is proposed based on three-dimensional hybrid cellular automata simulations. All relevant descriptors, including the transformed volume fraction and the interfacial surface area density between recrystallized and non-recrystallized regions, are obtained directly from voxel-level geometric information, without invoking phenomenological kinetic equations or auxiliary correction factors. The methodology is applied to different growth geometries, encompassing classical face-based cellular automata growth as well as spherical and spheroidal grain growth within a hybrid framework. The resulting microstructural paths reproduce the characteristic non-monotonic behavior reported in experimental and computational studies in the literature. Comparative analyses show that grain morphology significantly influences microstructural path evolution, highlighting the importance of geometric assumptions in recrystallization modeling. The proposed approach provides a transparent and reproducible framework for analyzing recrystallization microstructures and offers an independent, geometry-based perspective that complements traditional kinetic descriptions.
- Open Access
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 31
Modeling and simulation of recrystallization in metals with spheroidal grain structures using hybrid cellular automata
Hybrid Cellular Automata (HCA) are robust computational tools that extend the classical Cellular Automata (CA) framework by integrating both discrete and continuous modeling principles. This hybrid nature enables more accurate, flexible, and efficient simulations of complex microstructural phenomena. In this work, a three-dimensional HCA approach is employed to simulate the recrystallization of metallic materials with anisotropic spheroidal grains, specifically, prolate and oblate morphologies. The proposed model introduces geometric and mathematical formulations that enable control over grain shape and spatial orientation during growth, thus extending previous models limited to spherical symmetry. The implementation is entirely computational, developed in Python, and structured for modularity and efficiency. Several simulations were conducted under varying conditions, including single and multiple nuclei, different grid sizes, and controlled anisotropic orientations. These simulations demonstrate the model’s capacity to generate realistic and heterogeneous microstructures, with adjustable morphological and directional features. Quantitative analyses of grain volumes and growth patterns further validate the model’s precision and consistency. Additionally, the work explores spatial rotation techniques to simulate heterogeneous anisotropic textures within a single matrix, enabling the modeling of complex structures. The flexibility, ease of implementation, and qualitative accuracy of this HCA model establish it as a powerful tool for predictive analysis in computational materials science.
- 1 January 2026
- Published by FapUNIFESP (SciELO) in Matéria (Rio de Janeiro)
- Vol. 31
Open AccessModeling and simulation of recrystallization in metals with spheroidal grain structures using hybrid cellular automata
Hybrid Cellular Automata (HCA) are robust computational tools that extend the classical Cellular Automata (CA) framework by integrating both discrete and continuous modeling principles. This hybrid nature enables more accurate, flexible, and efficient simulations of complex microstructural phenomena. In this work, a three-dimensional HCA approach is employed to simulate the recrystallization of metallic materials with anisotropic spheroidal grains, specifically, prolate and oblate morphologies. The proposed model introduces geometric and mathematical formulations that enable control over grain shape and spatial orientation during growth, thus extending previous models limited to spherical symmetry. The implementation is entirely computational, developed in Python, and structured for modularity and efficiency. Several simulations were conducted under varying conditions, including single and multiple nuclei, different grid sizes, and controlled anisotropic orientations. These simulations demonstrate the model’s capacity to generate realistic and heterogeneous microstructures, with adjustable morphological and directional features. Quantitative analyses of grain volumes and growth patterns further validate the model’s precision and consistency. Additionally, the work explores spatial rotation techniques to simulate heterogeneous anisotropic textures within a single matrix, enabling the modeling of complex structures. The flexibility, ease of implementation, and qualitative accuracy of this HCA model establish it as a powerful tool for predictive analysis in computational materials science.
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28, e20250204
Study of Recrystallization in Metals through Equiaxial Growth of Nuclei by Computational Simulation with Three-Dimensional Hybrid Cellular Automata
Cellular Automata (CA) are powerful simulation tools that operate through discrete elements and associations. CA undirected neighborhood searches may produce specific grain shapes (e.g., octahedral, cuboctahedral, cubic), but not spherical ones. However, in recrystallization modeling, the spherical shape plays a crucial role. Thus, Hybrid Cellular Automata (HCA) share several properties with CA but operate in both continuous and discrete modes simultaneously. Unlike deterministic CA, HCA enable equiaxial grain growth without the need for additional correction algorithms, generating grains that remain initially spherical until they encounter boundaries. This behavior has been addressed by other simulation techniques, but HCA provide a simple and highly effective alternative. In this work, HCA are described in detail, including their foundational principles, algorithm performance, calibration, and potential results. The findings highlight the capability of HCA for straightforward and accurate recrystallization simulations with equiaxial growth.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Materials Research
- Vol. 28, e20250204
Open AccessStudy of Recrystallization in Metals through Equiaxial Growth of Nuclei by Computational Simulation with Three-Dimensional Hybrid Cellular Automata
Cellular Automata (CA) are powerful simulation tools that operate through discrete elements and associations. CA undirected neighborhood searches may produce specific grain shapes (e.g., octahedral, cuboctahedral, cubic), but not spherical ones. However, in recrystallization modeling, the spherical shape plays a crucial role. Thus, Hybrid Cellular Automata (HCA) share several properties with CA but operate in both continuous and discrete modes simultaneously. Unlike deterministic CA, HCA enable equiaxial grain growth without the need for additional correction algorithms, generating grains that remain initially spherical until they encounter boundaries. This behavior has been addressed by other simulation techniques, but HCA provide a simple and highly effective alternative. In this work, HCA are described in detail, including their foundational principles, algorithm performance, calibration, and potential results. The findings highlight the capability of HCA for straightforward and accurate recrystallization simulations with equiaxial growth.
- Open Access
- 30 June 2023
- Published by Revista Ergodesign e HCI in Ergodesign & HCI
- Vol. 11 (1) , 1-9
A A ótica do pedestre durante sua marcha em um ambiente construído: aplicação conjunta do nível de serviço e do diagrama fundamental pedestre
O ato de caminhar é uma atividade cotidiana e aparentemente trivial, no entanto, sua execução pode impactar significativamente tanto a nossa qualidade de vida como a nossa segurança pessoal. Por isso, muitos estudos e vieses existem sobre a marcha, como o nível de serviço (NS) e o diagrama fundamental pedestre (DFP). Esses conceitos apresentam diferentes perspectivas sobre a fluidez da movimentação humana em relação à densidade populacional, onde o NS traz uma preocupação com a percepção das pessoas, enquanto no DFP o foco está na determinação da alteração da velocidade de deslocamento. São abordagens usualmente empregadas em separado. Neste trabalho, por uma metodologia essencialmente exploratória, estas perspectivas para uma situação específica serão combinadas, permitindo verificar em conjunto e comparativamente ambos os resultados. Observou-se que o ponto ótimo de maior fluidez indicado pelo DFP está, pela perspectiva do NS, em uma zona de percepção considerada muito ruim. Portanto, se os projetistas de ambientes construídos considerarem apenas o DFP em suas abordagens, irão ser concebidos ambientes mais estressantes para os ocupantes. Assim, este artigo contribui ao apresentar essa abordagem não convencional para a verificação da adequação do ergodesign do ambiente construído, trazendo à discussão alguns pontos éticos.
- 30 June 2023
- Published by Revista Ergodesign e HCI in Ergodesign & HCI
- Vol. 11 (1) , 1-9
Open AccessA A ótica do pedestre durante sua marcha em um ambiente construído: aplicação conjunta do nível de serviço e do diagrama fundamental pedestre
O ato de caminhar é uma atividade cotidiana e aparentemente trivial, no entanto, sua execução pode impactar significativamente tanto a nossa qualidade de vida como a nossa segurança pessoal. Por isso, muitos estudos e vieses existem sobre a marcha, como o nível de serviço (NS) e o diagrama fundamental pedestre (DFP). Esses conceitos apresentam diferentes perspectivas sobre a fluidez da movimentação humana em relação à densidade populacional, onde o NS traz uma preocupação com a percepção das pessoas, enquanto no DFP o foco está na determinação da alteração da velocidade de deslocamento. São abordagens usualmente empregadas em separado. Neste trabalho, por uma metodologia essencialmente exploratória, estas perspectivas para uma situação específica serão combinadas, permitindo verificar em conjunto e comparativamente ambos os resultados. Observou-se que o ponto ótimo de maior fluidez indicado pelo DFP está, pela perspectiva do NS, em uma zona de percepção considerada muito ruim. Portanto, se os projetistas de ambientes construídos considerarem apenas o DFP em suas abordagens, irão ser concebidos ambientes mais estressantes para os ocupantes. Assim, este artigo contribui ao apresentar essa abordagem não convencional para a verificação da adequação do ergodesign do ambiente construído, trazendo à discussão alguns pontos éticos.
- Open Access
- 1 April 2019
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 19 (2) , 219-232
The influence of the location of emergency exits over the distance to be covered to the exit of an environment
In a building environment design, the positioning, size and quantity of the exits are fundamental aspects and have an intense relationship with the fire safety of the environments. An aspect that is influenced by these parameters is the average distance to be covered by occupants to the nearest exits during an escape in an emergency situation. The average distance could be used as a complementary measure of the safety of an environment (a lower average distance value indicates a probable faster evacuation rate). Thus, a pathfinder type algorithm to determine the value of the average distances to be covered to the nearest exit during an escape of an environment was detailed and implemented. Computational experiments were performed and the relationship between positioning, quantity and size of the exits and the value of the average distances were studied. The main conclusion was the importance of keeping the exits as far away from each other as possible in a given environment, so that a small distance to be covered could be obtained.
- 1 April 2019
- Published by FapUNIFESP (SciELO) in Ambiente Construído
- Vol. 19 (2) , 219-232
Open AccessThe influence of the location of emergency exits over the distance to be covered to the exit of an environment
In a building environment design, the positioning, size and quantity of the exits are fundamental aspects and have an intense relationship with the fire safety of the environments. An aspect that is influenced by these parameters is the average distance to be covered by occupants to the nearest exits during an escape in an emergency situation. The average distance could be used as a complementary measure of the safety of an environment (a lower average distance value indicates a probable faster evacuation rate). Thus, a pathfinder type algorithm to determine the value of the average distances to be covered to the nearest exit during an escape of an environment was detailed and implemented. Computational experiments were performed and the relationship between positioning, quantity and size of the exits and the value of the average distances were studied. The main conclusion was the importance of keeping the exits as far away from each other as possible in a given environment, so that a small distance to be covered could be obtained.
- Open Access
- 31 March 2019
- Published by Universidade Tecnologica Federal do Parana (UTFPR) in Revista Tecnologia e Sociedade
- Vol. 15 (36) , 214-234
Pitorescas marcas postais DH em objetos circulados modernos: ocorrências manuscrita, redundante, invertida, rasurada e omitida
Os Correios sofreram drásticas alterações nas últimas décadas devido ao surgimento de novas tecnologias, tanto em razão do impacto das mesmas no seu negócio, quanto pela alteração do comportamento da sociedade. Dentre as inúmeras marcas postais empregadas, a marca DH – Depois da Hora, indicativo de objeto postado fora do horário limite, teve um grande incremento no seu uso pelos Correios nas últimas décadas, em paralelo com o surgimento de novos serviços especiais. A aplicação da marca DH nos objetos é usualmente realizada via carimbagem ou em campos de franquias mecânicas, mas outros modus menos usuais podem ocorrer. Assim esse trabalho tem como objetivo identificar algumas dessas ocorrências peculiares e discorrer sobre suas implicações. A metodologia empregada consistiu basicamente na realização de uma busca sobre uma amostra de cerca de 7.000 objetos circulados modernos. Confirmou-se que a aplicação da marca DH nos objetos postais observados ocorre majoritariamente conforme esperado. Entretanto, foram também efetivamente identificadas outras formas não usuais de aplicação, como manuscrita, redundante, invertida e rasurada. Também foram verificados casos de omissão da sua aplicação física, denominada omitida, que é preocupante, tanto por questões filatélicas quanto éticas.
- 31 March 2019
- Published by Universidade Tecnologica Federal do Parana (UTFPR) in Revista Tecnologia e Sociedade
- Vol. 15 (36) , 214-234
Open AccessPitorescas marcas postais DH em objetos circulados modernos: ocorrências manuscrita, redundante, invertida, rasurada e omitida
Os Correios sofreram drásticas alterações nas últimas décadas devido ao surgimento de novas tecnologias, tanto em razão do impacto das mesmas no seu negócio, quanto pela alteração do comportamento da sociedade. Dentre as inúmeras marcas postais empregadas, a marca DH – Depois da Hora, indicativo de objeto postado fora do horário limite, teve um grande incremento no seu uso pelos Correios nas últimas décadas, em paralelo com o surgimento de novos serviços especiais. A aplicação da marca DH nos objetos é usualmente realizada via carimbagem ou em campos de franquias mecânicas, mas outros modus menos usuais podem ocorrer. Assim esse trabalho tem como objetivo identificar algumas dessas ocorrências peculiares e discorrer sobre suas implicações. A metodologia empregada consistiu basicamente na realização de uma busca sobre uma amostra de cerca de 7.000 objetos circulados modernos. Confirmou-se que a aplicação da marca DH nos objetos postais observados ocorre majoritariamente conforme esperado. Entretanto, foram também efetivamente identificadas outras formas não usuais de aplicação, como manuscrita, redundante, invertida e rasurada. Também foram verificados casos de omissão da sua aplicação física, denominada omitida, que é preocupante, tanto por questões filatélicas quanto éticas.
- Open Access
- 20 December 2017
- Published by Forschungszentrum Julich, Zentralbibliothek in Collective Dynamics
- Vol. 2, 1-21
On the Boate Kiss Fire and the Brazilian Safety Legislation - What we can learn
Brazil was recently the scenario of a great tragedy in the fire at Kiss nightclub, where 242 people were killed. The starting point of the fire was the use of a pyrotechnic device over an acoustic coating made of polyurethane foam. The causalities were caused mainly by asphyxia and inhalation of toxic gases in a very fast smoke expansion. However, several additional causes contributed to the amount of damage and human losses. The accident investigations emphasized the necessity to discuss details in the applicable Brazilian legislation. In this work, the tragedy of Kiss nightclub is presented and the some of their mainly aspects discussed. The Brazilian standard (ABNT NBR 9077) to determine the dimension of emergency exits is also presented. Then, a computational simulation of evacuation process in an environment externally similar to Kiss nightclub with different width exits and populations is performed using the software Fuga. It was found that, in spite of the configurations of Kiss nightclub have had a fundamental role in tragedy, the current Brazilian standard was not appropriate for the design of such environment and should not have been used. Moreover, clear and more rigorous standards also need to be further discussed, particularly for panic situations. At the end, some considerations are made in order to improve the standards about the dimensioning of emergency exits.
- 20 December 2017
- Published by Forschungszentrum Julich, Zentralbibliothek in Collective Dynamics
- Vol. 2, 1-21
Open AccessOn the Boate Kiss Fire and the Brazilian Safety Legislation - What we can learn
Brazil was recently the scenario of a great tragedy in the fire at Kiss nightclub, where 242 people were killed. The starting point of the fire was the use of a pyrotechnic device over an acoustic coating made of polyurethane foam. The causalities were caused mainly by asphyxia and inhalation of toxic gases in a very fast smoke expansion. However, several additional causes contributed to the amount of damage and human losses. The accident investigations emphasized the necessity to discuss details in the applicable Brazilian legislation. In this work, the tragedy of Kiss nightclub is presented and the some of their mainly aspects discussed. The Brazilian standard (ABNT NBR 9077) to determine the dimension of emergency exits is also presented. Then, a computational simulation of evacuation process in an environment externally similar to Kiss nightclub with different width exits and populations is performed using the software Fuga. It was found that, in spite of the configurations of Kiss nightclub have had a fundamental role in tragedy, the current Brazilian standard was not appropriate for the design of such environment and should not have been used. Moreover, clear and more rigorous standards also need to be further discussed, particularly for panic situations. At the end, some considerations are made in order to improve the standards about the dimensioning of emergency exits.
- Open Access
- 10 November 2017
- Published by Pontificia Universidade Catolica de Minas Gerais in Abakós
- Vol. 6 (1) , 19-34
Simulação com Lógica Fuzzy da Movimentação Bidirecional de Pessoas com Formação de Rios de Escoamento e do Empacotamento Humano
Durante a movimentação de pessoas em uma situação de abandono de um ambiente construído, normalmente, se imagina que o escape irá ocorrer em fluxo unidirecional rumo às saídas mais próximas. Mas em situações de grande estresse e desorientação, o fluxo humano pode não ser direcionado. Além disso, mesmo numa situação de normalidade, um fluxo bidirecional mal concebido pode causar uma perigosa situação de congestionamento ou comportamento não adaptativo. Dois dos importantes fenômenos que podem acontecer na movimentação bidirecional são a formação dos rios de escoamento e do empacotamento. Na movimentação humana, além dos aspectos físicos, devem também ser considerados os aspectos comportamentais e cognitivos das pessoas envolvidas, cuja natureza é basicamente qualitativa. Para que se possa realizar uma modelagem com fatores de natureza tão distinta, uma ferramenta de inteligência computacional passível de ser usada é a lógica fuzzy. Assim, este trabalho tem como objetivo modelar qualitativamente a movimentação humana em fluxos bidirecionais, observando a formação dos rios de escoamento humano e do empacotamento, por meio de uma modelagem celular associada à lógica fuzzy.
- 10 November 2017
- Published by Pontificia Universidade Catolica de Minas Gerais in Abakós
- Vol. 6 (1) , 19-34
Open AccessSimulação com Lógica Fuzzy da Movimentação Bidirecional de Pessoas com Formação de Rios de Escoamento e do Empacotamento Humano
Durante a movimentação de pessoas em uma situação de abandono de um ambiente construído, normalmente, se imagina que o escape irá ocorrer em fluxo unidirecional rumo às saídas mais próximas. Mas em situações de grande estresse e desorientação, o fluxo humano pode não ser direcionado. Além disso, mesmo numa situação de normalidade, um fluxo bidirecional mal concebido pode causar uma perigosa situação de congestionamento ou comportamento não adaptativo. Dois dos importantes fenômenos que podem acontecer na movimentação bidirecional são a formação dos rios de escoamento e do empacotamento. Na movimentação humana, além dos aspectos físicos, devem também ser considerados os aspectos comportamentais e cognitivos das pessoas envolvidas, cuja natureza é basicamente qualitativa. Para que se possa realizar uma modelagem com fatores de natureza tão distinta, uma ferramenta de inteligência computacional passível de ser usada é a lógica fuzzy. Assim, este trabalho tem como objetivo modelar qualitativamente a movimentação humana em fluxos bidirecionais, observando a formação dos rios de escoamento humano e do empacotamento, por meio de uma modelagem celular associada à lógica fuzzy.