SSSidney Nicodemos da Silva

Sidney Nicodemos da Silva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sidney Nicodemos da Silva has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A restricted-face approach for surface area estimation in 3D voxel-based microstructural simulations

    by Henrique Costa Braga, Sidney Nicodemos da Silva, Elaine Carballo Siqueira Corrêa

    Reliable surface area estimation remains a practical bottleneck in three-dimensional voxel-based microstructural models, particularly in metallurgical problems governed by interfacial phenomena. While grain volume can be computed directly from voxel counts with minimal ambiguity, surface measures derived from digital lattices are not unique and often exhibit systematic bias and orientation dependence. This work proposes a calibrated restricted-face framework for grain surface area estimation in 3D voxel-based growth models. Three surface definitions are examined: (i) equivalent surface area inferred from volume under a spherical assumption, (ii) full-face surface area based on exposed voxel faces, and (iii) a restricted-face proxy derived from 6-neighborhood surface-voxel classification. The restricted-face approach provides an orientation-robust and computationally efficient estimator of interfacial extent, with its systematic underestimation corrected through a single dimensionless proportionality constant obtained from analytical benchmarks. Validation against analytical solutions for spheres and spheroids in 201 3 lattices shows that corrected estimates achieve deviations on the order of ±10% across the tested size and orientation ranges. Application to polycrystalline simulations in 200 3 lattices with 1000 randomly distributed nuclei yields statistically consistent surface-area distributions and captures the expected increase in interfacial measures under anisotropic growth. Overall, the proposed framework provides a practical and scalable solution for surface-dependent analyses in voxel-based microstructural simulations.

  • Open Access

    Discrete Microstructural Pathway Modeling of Recrystallization Using Three-Dimensional Hybrid Cellular Automata

    by Henrique Costa Braga, Sidney Nicodemos da Silva, Elaine Carballo Siqueira Corrêa

    The quantitative analysis of recrystallization microstructures requires methodologies capable of describing interfacial evolution clearly and with minimal reliance on phenomenological assumptions. Although microstructural paths relating interfacial surface area density to transformed volume fraction are well-established in experimental and hybrid modeling studies, their determination commonly depends on analytical kinetic formulations or fitted parameters. In this work, a fully discrete formulation of the recrystallization microstructural path is proposed based on three-dimensional hybrid cellular automata simulations. All relevant descriptors, including the transformed volume fraction and the interfacial surface area density between recrystallized and non-recrystallized regions, are obtained directly from voxel-level geometric information, without invoking phenomenological kinetic equations or auxiliary correction factors. The methodology is applied to different growth geometries, encompassing classical face-based cellular automata growth as well as spherical and spheroidal grain growth within a hybrid framework. The resulting microstructural paths reproduce the characteristic non-monotonic behavior reported in experimental and computational studies in the literature. Comparative analyses show that grain morphology significantly influences microstructural path evolution, highlighting the importance of geometric assumptions in recrystallization modeling. The proposed approach provides a transparent and reproducible framework for analyzing recrystallization microstructures and offers an independent, geometry-based perspective that complements traditional kinetic descriptions.


  • Open Access

    Geopolymeric mortars through acid and basic activations formulated from slate mining waste

    by Nayara Tamires Alves Francisco, Sidney Nicodemos da Silva, Mateus Justino da Silva

    Since the mid-1970s, geopolymer mortars and concretes have been produced through the alkaline activation of mixtures containing natural raw materials or wastes rich in silica (SiO2) and alumina (Al2O3), using a two-part processing method. In general, these inorganic polymers exhibit good mechanical performance, thermal resistance, and tribochemical properties. The literature has demonstrated that mining tailings (dust) from slate dams rich in aluminosilicates can be reused to obtain geopolymer composites through alkaline activation with potassium hydroxide (KOH) or sodium hydroxide (NaOH), or even with other basic aqueous solutions such as sodium silicates. Currently, there is an attempt in the literature to improve the synthesis of geopolymer compounds by acid activation, called silicoaluminophosphates, among the various aqueous phosphate solutions and others described in the literature. Therefore, food-grade phosphoric acid (H3PO4) at a concentration of 85% was selected for this exploratory study. The scope of this research was to evaluate the potential use of slate mining residue as a raw material in the synthesis of geopolymer composites using the two-part method for civil construction applications, such as mortars for the manufacture of auxiliary lightweight paving structures, masonry enclosures, and auxiliary urban elements. The raw material was optimized by grinding in a ball mill for periods of 15 minutes, 2 hours, and 7 hours, until reaching the desired particle size for geopolymerization. The materials were subjected to laser particle size analysis and physicochemical characterization by XRF, XRD, and SEM of both the raw material and the geopolymer specimens (PCs). During the processing of the PCs, the setting time was analyzed, and then their mechanical behavior was evaluated by compression tests at 28 days. The results of the mechanical compressive strength were satisfactory, showing increases in the alkaline mixture mixes (1 and 2), with corresponding values of 100% and 47.33%, respectively. In the acidic mixture, in mixes (1 and 3), strength reached increases of 91% and 93%, indicating potential for application in non-structural masonry. It was concluded that slate residue can be applied in infrastructure, urban sanitation, paving of public roads, and auxiliary paving structures, using geopolymerization techniques.


  • Open Access

    Modeling and simulation of recrystallization in metals with spheroidal grain structures using hybrid cellular automata

    by Henrique Costa Braga, Sidney Nicodemos da Silva, Elaine Carballo Siqueira Corrêa

    Hybrid Cellular Automata (HCA) are robust computational tools that extend the classical Cellular Automata (CA) framework by integrating both discrete and continuous modeling principles. This hybrid nature enables more accurate, flexible, and efficient simulations of complex microstructural phenomena. In this work, a three-dimensional HCA approach is employed to simulate the recrystallization of metallic materials with anisotropic spheroidal grains, specifically, prolate and oblate morphologies. The proposed model introduces geometric and mathematical formulations that enable control over grain shape and spatial orientation during growth, thus extending previous models limited to spherical symmetry. The implementation is entirely computational, developed in Python, and structured for modularity and efficiency. Several simulations were conducted under varying conditions, including single and multiple nuclei, different grid sizes, and controlled anisotropic orientations. These simulations demonstrate the model’s capacity to generate realistic and heterogeneous microstructures, with adjustable morphological and directional features. Quantitative analyses of grain volumes and growth patterns further validate the model’s precision and consistency. Additionally, the work explores spatial rotation techniques to simulate heterogeneous anisotropic textures within a single matrix, enabling the modeling of complex structures. The flexibility, ease of implementation, and qualitative accuracy of this HCA model establish it as a powerful tool for predictive analysis in computational materials science.


  • Open Access

    Técnica de dispersão do grafeno em solução aquosa para aplicação em argamassas cimentícias contendo grafeno

    by Jefferson Paula, Fernando Gabriel da Silva Araújo, Wellington Mazer, Sidney Nicodemos da Silva, Peter Ludvig

    O uso do grafeno em argamassas cimentícias e no concreto armado, tem se tornado frequente, devido aos ganhos nas propriedades físicas. Não se limitando às propriedades físicas, o grafeno, por melhorar a capacidade piezoelétrica do concreto, o que permite que seja utilizado em aplicações de blindagem eletromagnética, pode ser utilizado para melhorar os ciclos de congelamento e descongelamento do concreto, através do refinamento dos poros da argamassa cimentícia, tornando-o adequado para a execução de pisos de câmaras frias, mais resistentes, e diversas outras possíveis aplicações. A adversidade do uso do grafeno em argamassas cimentícias e no concreto armado, se encontra na dispersão do grafeno, pois suas propriedades são perdidas em caso de aglomeração. Neste contexto, esta pesquisa apresenta um processo de dispersão do grafeno em solução aquosa, contendo superplastificantes para evitar a aglutinação. Foram testados os teores de grafeno testados, de 2,5, 5,0, 7,5 e 10,0 gramas, com resultados positivos, para a dispersão e não aglutinação do grafeno na solução.

  • Open Access

    Evaluation of pathologies generated in reinforced concrete by magnetic field induced by transformers and/or electrical distribution switchboard: a case study

    by Jefferson Paula, Peter Ludvig, Sidney Nicodemos da Silva, Wellington Mazer

    Reinforced concrete has enabled the development of large-scale infrastructure for commercial, industrial, and residential purposes. In recent years, there has been an increase in structural pathologies associated with exposure to electromagnetic fields, particularly due to the intensive use of power transformers and other electronic devices. However, current technical standards do not yet provide specific protocols for measuring, preventing, and mitigating, through preventive maintenance, these effects. This study aims to analyze and compare, through case studies, the damage caused by electromagnetic fields in reinforced concrete structures, considering magnetic field intensity. Measurements were taken on two transformers and a residential distribution panel, assessing the relationship between field intensity, distance, and power. For the transformer located on a university campus, an inverse relationship between magnetic field intensity and distance from the source was observed. The findings indicate that even structures housing smaller equipment are susceptible to the harmful effects of prolonged exposure to electromagnetic fields.

  • Open Access

    Study of Recrystallization in Metals through Equiaxial Growth of Nuclei by Computational Simulation with Three-Dimensional Hybrid Cellular Automata

    by Henrique Costa Braga, Sidney Nicodemos da Silva

    Cellular Automata (CA) are powerful simulation tools that operate through discrete elements and associations. CA undirected neighborhood searches may produce specific grain shapes (e.g., octahedral, cuboctahedral, cubic), but not spherical ones. However, in recrystallization modeling, the spherical shape plays a crucial role. Thus, Hybrid Cellular Automata (HCA) share several properties with CA but operate in both continuous and discrete modes simultaneously. Unlike deterministic CA, HCA enable equiaxial grain growth without the need for additional correction algorithms, generating grains that remain initially spherical until they encounter boundaries. This behavior has been addressed by other simulation techniques, but HCA provide a simple and highly effective alternative. In this work, HCA are described in detail, including their foundational principles, algorithm performance, calibration, and potential results. The findings highlight the capability of HCA for straightforward and accurate recrystallization simulations with equiaxial growth.


  • Open Access

    Development of core-shell nanocomposites containing iron oxide,silica and samarium for potential application in cancer treatments involving brachytherapy and magnetic hyperthermia

    by Gabriela Veloso, Roberta Ferreira, Wanderley Roberto, Sidney Nicodemos da Silva

    Nanocomposites formed of natural-origin iron oxide nanoparticles (magnetite and maghemite, Fe3O4 and γ-Fe2O3, respectively) were processed using the sol-gel process into core-shell structures containing silica and samarium to investigate their potential for applications in cancer treatments combining hyperthermia and brachytherapy. Mössbauer characterization showed that the iron oxides contained 64% magnetite, 18% hematite, 12% maghemite, and exhibit superparamagnetic behavior at room temperature. Transmission electron microscopy determined that the iron oxide particles were smaller than 15 nm, while magnetization was measured at 5 emu/g. Fourier transform infrared indicated the material was formed of Si-O-Si and Fe-O-Si bonds, while X-ray diffraction showed bands of amorphous silica from 5° to 23° and bands of iron oxide phases. X-ray fluorescence indicated 5.17% of incorporated samarium. The nanocomposite suspensions were subjected to an alternating magnetic field and the resulting heat dissipation was measured, falling within the ideal range for hyperthermia applications. Theoretical dosimetric calculation determined significant radioactive activity of 1.68x10-8 MBq.mg-1.Φ -1 after 24h decay time for 153Sm. The characteristics and behavior of these nanocomposites indicate that they may offer promise in applications involving hyperthermia for cancer treatment and a more accessible source for brachytherapy materials.


  • Open Access

    Influência do colágeno tipo I na propriedade físico-química, morfológica e biológica de blendas poliméricas de PLGA para aplicação oftálmica

    by André de Barros Ferreira, Ana Flávia Rodrigues Sales, Sidney Nicodemos da Silva, Kátia Michelle Freitas

    RESUMO Implantes biodegradáveis associados ao sistema de liberação de drogas são promissores para o sucesso do tratamento de doenças oftálmicas. Dentre os diversos materiais empregados para o desenvolvimento desses dispositivos, o colágeno possui propriedades singulares e bastante consideráveis na biomédica como a biocompatibilidade e segurança conhecidas. O presente estudo desenvolveu blendas poliméricas e investigou a influência do colágeno nas características térmicas, química, morfológicas e biológicas, em combinação com PLGA (poli-ácido lático-co-glicólico). As blendas foram obtidas em diferentes proporções de PLGA e colágeno: P75C25 (75 % PLGA e 25 % colágeno) e P50C50 (50 % PLGA e 50% colágeno). Em análises de difratometria de raio X (DRX) e espectroscopia de infravermelho por transformada de Fourier (FTIR), os produtos obtidos preservaram a propriedade amorfa e apresentaram semelhanças nos perfis de espectro de absorção de bandas em relação as matrizes poliméricas. O aumento de colágeno é inversamente proporcional à redução do pico de temperatura de degradação térmica sem perda máxima de massa da blenda, ao contrário do que foi observado na amostra P75C25. Além disso, P50C50 apresentou redução de molhabilidade, ou seja, menor hidratação que contribuiu na degradação controlada da blenda e uma morfologia heterogênea. Na caracterização biológica, ambas amostras apresentaram características hemocompatíveis sem alteração morfológica dos linfócitos isolados ou mudança nos níveis de espécies reativas de oxigênio. Desse modo, as blendas poliméricas podem ser potencialmente aplicáveis como uma plataforma multifuncional visando o aprisionamento e sistema de liberação de fármacos.

  • Open Access

    Effects of the addition of graphene on the compressive strength of geopolymeric mortar developed from k-feldspar mining waste

    by Vinícius Meirelles Mendonça, Flávio Renato de Góes Padula, Sidney Nicodemos Silva, Plínio Fernandes Borges Silva, Jefferson de Paula