Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Marcelo Vinicius de Paula has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A method for quantifying availability losses caused by PV inverter start-up delays in a large-scale PV power plant: A case study in Southeastern Brazil

    by João Frederico Souza de Paula, Marcel Veloso Campos, João Lucas de Souza Silva, Marcelo Vinícius de Paula, Valentin Ferrer, Gustavo Fraidenraich, Tárcio André dos Santos Barros

  • Open Access

    Compensated Torque Sharing Strategy and Gain-Scheduled Proportional Current Controller for Torque Ripple Minimization in SRM-based Belt-Driven Starter-Generator System

    by Paulo Robson Melo Costa, Vinícius Augusto De Abreu Batista, Marcelo Vinícius De Paula, Tárcio André Dos Santos Barros

    This study investigates Switched Reluctance Machines (SRMs) for transportation electrification, introducing a Compensated Torque Sharing Strategy (CTSS) to minimize torque ripple by improving phase torque distribution. The proposed strategies are validated in Belt-Driven Starter-Generator (BSG) systems for Hybrid Electric Vehicles. Two control strategies are proposed: Proposal 1 (LQI-CTSS), which combines a Linear-Quadratic-Integral (LQI) regulator with CTSS for robust speed and current control at fixed switching frequency; and Proposal 2 (LQI-CTSS-GSP), which enhances this by adding a Gain-Scheduled Proportional (GSP) current controller that adapts to back-EMF and inductance variations. Two reference strategies are also considered: Reference 1 (PI-cosTSF-HCC), with a PI speed controller, cosine torque sharing, and hysteresis current control; and Reference 2 (PI-DITC), based on Direct Instantaneous Torque Control. All strategies support four-quadrant operation. Simulations and experiments confirm the proposed methods improve speed response, torque smoothness, and robustness while maintaining efficiency and simplicity. Notably, Proposal 2 reduced torque ripple to 7.2% in motoring and 8.6% in generating mode, versus 13.7% and 22.5% for a reference strategy.


  • A Novel SRM Predesign Method for Meeting Power Envelope Constraints Based on Pareto-Optimal Topology Selection

    by Vinicius A. De Abreu Batista, Rolando R. Caicedo Castro, Paulo Robson Melo Costa, Gabriel Marques Oliveira, Marcelo Vinícius De Paula, Tárcio André Dos S. Barros

    This paper presents a general pre-design methodology for switched reluctance motors (SRMs). The method enables designing multiple SRM topologies that satisfy nominal torque and base speed requirements for varying electric loading and current density conditions. Flux linkage and torque lookup tables are generated analytically using a magnetic circuit model with Gaussian approximation, reducing computational cost while maintaining accuracy. The implemented constant speed control and transient iron loss model achieves errors below 10%. Validation against finite element simulations shows up to 12% deviation. The approach is exemplified for an agricultural application, and multi-objective Pareto analysis identifies the 16 / 12 four-phase topology as optimal. The methodology provides a suitable initial design for subsequent geometry optimization and performance enhancement of SRMs.

  • A Modular H-Bridge Converter Based SRM Drive with Integrated Fault-Tolerant Capability for an Agricultural Hybrid Vehicle

    by Raul G. Intriago-Velasquez, João P. Carvalho Silveira, Rolando R. Caicedo Castro, Bruna Aderbal De Oliveira, Tárcio André dos S. Barros, Marcelo Vinícius De Paula

    Agricultural hybrid vehicles demand propulsion systems that are not only efficient but also fault-tolerant, enabling enhanced lifespan of motor drives, increasing MTBF, and reducing maintenance costs. In this context, this article implements an open-circuit fault diagnosis and leverages the inherent fault-tolerant capabilities in a 30 kW four-phase H bridge converter by examining its speed control at rated load during sequential fault events on each phase. Results show that the SRM drive is capable of mitigating open-circuit faults while maintaining speed regulation performance. Diagnosis delay took 258 processing cycles. Proposed system is also tested under a relevant agricultural driving cycle at close-to-rated speed and torque. Mean squared error between desired and actual speed resulted in 0.4455%.


  • Modeling and Balancing of a Lithium-Ion Battery Bank for an Agricultural Hybrid Vehicle

    by Paulo Soares Filho, Andressa Mara M. Alexandre, Thiago Belina S. Ramos, João Pedro Carvalho Silveira, Marcelo Vinícius de Paula, Tárcio André dos S. Barros

    The use of hybrid vehicles in agriculture offers energy optimization, reduced fuel consumption, and lower emissions, making it a sustainable and efficient alternative for the sector. To ensure optimal performance of this equipment, the energy storage system proves to be an essential part of the setup. Batteries provide energy to the electric motor during low-speed operations, assist the combustion engine during high power demand, and enable energy recovery during braking or deceleration. Proper design, modeling, and precise balancing of the storage system are crucial to ensure the battery pack operates in a balanced and efficient manner. This involves considering parameters such as discharge rate, state of charge (SOC), and internal resistance of each battery. The relevance of this project spans several technical and operational factors, including accurate system modeling, performance optimization, and battery durability. In this context, the present article presents a methodology for the design, modeling, and balancing of a lithium-ion battery pack for an agricultural hybrid vehicle.

  • Comparative Analysis of Winding Configurations in a 16/12 Switched Reluctance Motor

    by Rolando R. Caicedo Castro, Vinicius A. de Abreu Batista, Raul G. Intriago-Velasquez, Bruna Aderbal De Oliveira, Marcelo Vinícius De Paula, Tárcio André dos S. Barros

    This paper shows a comparative analysis of the winding configurations in a 4 -phase $16 / 12$ switched reluctance motor. Eight winding configurations are compared and the influence of the configurations in the developed torque, power, efficiency and inductance values are studied. The different windings configurations are modeled and simulated using a commercial finite element method electromagnetic software. Despite that a configuration with all phases connected in long path exhibits better characteristic, others configuration shows similar results in term of developed torque, efficiency and torque ripple. Those results give some insight into the earliest states of the motor design workflow.

  • Lumped Parameter Thermal Network for a Switched Reluctance Motor in Agricultural Machinery Application

    by Gabriel Marques Oliveira, Rolando Rodrigo Caicedo Castro, Vinicius Augusto de Abreu Batista, Ingrid Lopes Motta, Marcelo Vinicius de Paula, Tárcio André dos SantosBarros

    At present, there is increasing interest in the usage of electric motors in order to mitigate climate change. An advantageous topology in harsh environments is the switched reluctance motor (SRM). In this context, a lumped parameter thermal network (LPTN) for an SRM is developed by a combination of currently available in the literature conductive models (used to describe each of the motor components) and convective heat transfer correlations (used to quantify heat exchange in the end space air, in the air gap, and in the cooling system). When compared against an industry-standard software for electric motor design, the resulting temperatures in the main points of interest show remarkable precision (with the temperature error in almost all interest points being within $\mathbf{1 0}^{\boldsymbol{\circ}} \mathbf{C}$). Additionally, the proposed model allows for transient analyses, a feature that most models available in the literature lack due to numerical instability around negative thermal resistances.

  • Winding Connection and Gauge Analysis for a 16/12 Switched Reluctance Motor

    by Rolando R. Caicedo Castro, Vinicius A. de Abreu Batista, Raul G. Intriago-Velasquez, Bruna Aderbal de Oliveira, Marcelo Vinícius de Paula, Tárcio André dos S. Barros

    Switched reluctance motors (SRMs) are attractive for vehicle electrification due to their mechanical simplicity, robustness, competitive power density and cost. This paper studies how conductor gauge, coil connection and slot fill factor interact to shape the electromagnetic performance of a 30 kW four-phase 16/12 SRM. Starting from an initial design, nine winding variants are evaluated while varying fill factors. Ansys Motor-CAD and finite-element simulations are used to produce speed and power envelopes, detailed current and torque waveforms at the design operating point and determine the temperatures in the motor. Results show that increasing turns and appropriately selecting wire gauge can raise the machine's average electromagnetic and shaft torque by up to 5% and also influence the maximum power, while keeping efficiency above $\mathbf{9 3 \%}$ and maintain the temperature in the motor under the thermal limits of the insulation coatings. Augmenting average torque can also cause an increase in torque ripple by up to 58% in the studied case. The findings demonstrate that simple, manufacturer choices in winding arrangement and conductor sizing provide a practical means to tune torque, power and torque ripple for SRM applications.

  • Evaluation of Electrolytic Capacitors Reliability Based on Operational Profiles of HEV and PV

    by Andressa Mara M. Alexandre, Paulo Soares Filho, Marcelo Vinícius de Paula, Thiago Belina S. Ramos, Pedro José dos S. Neto, Tárcio André dos S. Barros

    The lifespan of capacitors is a critical factor in the reliability of power systems, as these components play an essential role in filtering, voltage stabilization, and energy storage. Electrolytic capacitors, widely used in hybrid electric vehicles, photovoltaic systems and other power applications, are particularly susceptible to catastrophic failures due to their construction and sensitivity to thermal and electrical stress. The reliability of these capacitors is heavily influenced by the operational profile they undergo, including factors such as temperature, ripple current, and voltage variations, which accelerate aging and wear. In this context, the present article evaluates the reliability of DC bus capacitors, emphasizing the impact of the operational profile. This approach enables the identification of the most critical conditions affecting the lifespan of these components.

  • Open Access

    Fault Section Identification in Distribution Networks with DFIG and PMSG Generators Using Current Transients

    by Juan Carlos Peqqueña Suni, Marina Gabriela Sadith Pérez Paredes, Marcelo Vinicius de Paula, Ernesto Ruppert Filho, Juan Antonio Martinez Velasco

    This paper presents a methodology for fault section identification (FSI) in distribution networks with embedded wind power generation. The phase currents are measured only at the distribution substation (DS), using a waveform window of two cycles (one before and one after the fault detection). The proposed approach is divided into two stages: the first stage, Fault Identification (FI), aims to identify whether a short-circuit fault lies on a main feeder or one of the branches effectively addressing the challenge of multiple fault locations that may arise when several branches correspond to the estimated fault point; the second stage, Fault Location (FL), estimates the distance between the DS and the fault location. The algorithm employs discrete wavelet transform (DWT) in combination with artificial neural networks (ANNs). Energy and Relative Energy Entropy, both in per unit (EPU and REEPU), are proposed and calculated from DWT decomposition, with regularization indexes applied to EPU and REEPU. These indexes serve as input to multi-layer ANN models, which work as classifiers for FI and predictors for FL. Various fault scenarios with different fault inception angle, fault type, fault resistance and fault location are simulated using MATLAB software and the IEEE 34-node benchmark feeder as test system. The results demonstrate that the proposed methodology performs effectively the FSI task, achieving an accuracy of up to 95% for FI and a maximum error of 5.2% for FL.