YLYinghui Liu

Yinghui Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yinghui Liu has a total of 89 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development and Cold-Test Validation of a 326--356 GHz Backward-Wave Oscillator Based on a Sine Ridge Waveguide Slow-Wave Structure

    by Boning Gao, Lingna Yue, Jin Xu, Jian Zhang, Pengcheng Yin, Linqi Feng, Zixuan Su, Xinke Zhang, Wei Li, Wuyang Fan, et al.

  • Optimization of magnetron injection gun and multi-coil collector design for 170 GHz gyrotron

    by Jin Han, Yinghui Liu, Feng Luo, Hongyang Guo, Boxin Dai, Kai Jia, Zongzheng Sun, Xinjian Niu

    As gyrotrons progress into the millimeter wave range, electron energy reaches the MW level, requiring advanced electron optical systems (EOS) to address electron velocity spread and collector thermal load challenges. This study introduces a continuously curved anode structure that smooths the spatial variation of the electric field magnitude, reduces transverse velocity spread, and enhances beam quality through improved electric-magnetic field matching. To reduce the thermal load on the collector, compensation coils carrying direct current are wound around its outer wall. Simulations of configurations with 1, 5, and 9 coils show that the 9-coil setup, combined with the residual superconducting field, forms an extended uniform magnetic region, adjusting the electron orbit radius to match the collector’s inner radius. This alignment reduces the collision angle between electron trajectories and the collector wall, effectively expands the electron landing range, and reduces local power density. At a spent beam power of 2.925 MW—equal to the electron beam input power in the absence of RF interaction—the electron impact length extends from 46 to 1001.3 mm, and the peak collision power density drops by 93.7%, from 7869.6 to 494.6 W/cm2. These results demonstrate that the proposed multi-coil magnetic topology effectively overcomes heat dissipation limitations, ensuring stable operation of high-power gyrotrons and providing a promising solution for EOS design in millimeter-wave radiation sources.

  • Open Access

    The novel time-dependent multimode self-consistent nonlinear theory of gyrotron

    by Kai Jia, Xinjian Niu, Yinghui Liu, Jianwei Liu, Zongzheng Sun, Hongfu Li

    How to quickly and accurately analyze the effect of different modes competing with each other on the beam–wave interaction is an important question in developing gyrotrons. In this paper, a novel time-dependent multimode self-consistent nonlinear theory model is presented to research the mode competition phenomenon in high-frequency structures. This model investigates the electromagnetic field in the resonant cavity using generalized telegrapher’s equations to speed up the computational speed, adopts the waveguide-centered coordinate to represent the electron equations of motion to obtain realistic electron trajectories, and gives the form of the discretized representation of the source term under present conditions. Based on the theoretical model, we have developed the in-house code CESG-2024 to study gyrotron devices. Ultimately, we study the mode competition in a 95 GHz gyrotron utilizing this code, and the simulation results concord with the experimental results, further indicating the theory’s reliability.

  • Theoretical study of mode competition including backward wave and experiment on the 28 GHz second harmonic gyrotron

    by Kai Jia, Xinjian Niu, Yinghui Liu, Jianwei Liu, Zongzheng Sun, Hongfu Li

    The gyrotron operates in the harmonic state, which can significantly reduce the required operating magnetic field but complicates the mode competition problem. In some situations, it is also possible for the backward wave of the fundamental wave mode to be excited to suppress the desired harmonic operating mode. Therefore, a detailed analysis of mode competition is necessary for gyrotrons operating in the harmonic state. This paper presents the theoretical research of mode competition and experimental work for the 28 GHz second harmonic gyrotron at the TE02 mode. Possible mode competition problems are analyzed in detail using the linear theory and the multimode time-dependent non-linear theory. The problem of excitation of the backward wave of the fundamental wave mode TE21, which may be present, is received focused investigation. Ultimately, the possible competition modes are successfully suppressed in the non-linear simulation by setting up a suitable startup scenario, and an interaction efficiency of 32.5% is obtained. Based on the theoretical research results, experimental verification is carried out. When the working voltage is 29.8 kV, the beam current is 1.18 A, and we obtain stable single mode operation of the gyrotron, which has an operation frequency of about 27.96 GHz and an interaction efficiency of about 30.1% from the experiment.

  • Design and Nonlinear Theoretical Investigations on a 250 GHz MW-Level CW Demo Gyrotron With Realistic Electron Beam

    by Kai Jia, Xinjian Niu, Yinghui Liu, Jianwei Liu, Tianzhong Zhang, Hongfu Li, Zongzheng Sun

    This article presents a study for a 250 GHz MW-level continuous mode gyrotron to satisfy the demand of DEMO for over 200 GHz high-power microwave sources. Through careful analysis, the new high-order mode TE $_{45,18}$ is chosen as the operation mode. Simultaneously, the magnetic injection electron gun is researched to meet the operation requirement of the gyrotron. A novel curved gradient structure is proposed instead of the traditional linear folding structure for obtaining high-quality electronic beams. Through the linear theory and the time-dependent multimode self-consistent nonlinear theory of gyrotron, the detailed study of mode competition is conducted in the resonator cavity. The TE $_{45,18}$ mode can maintain operational stability while suppressing other competition modes at the magnetic field of 9.9600 T, the operation voltage of 80 kV, and the beam current of 35 A. When considering the ideal electron beam, the output power is 1070 kW and the operation efficiency is 38.21%. The output power and operation efficiency are reduced to 1041 kW, and 37.17%, respectively, when considering the realistic electron beam from the magnetic injection gun (MIG) electron gun.

  • An improved cubature Kalman filter state prediction method based on the design of active denial tracking system

    by Zongzheng Sun, Xinjian Niu, Kai Jia, Jianwei Liu, Yinghui Liu

    In this paper, an improved CKF (Cubature Kalman Filter) target tracking method is adopted to solve the tracking and pointing problem in the field of the Active Denial System. The math model of the system is built and the precision requirement is analyzed. The improved CKF method is input as the feedforward compensation for system control to improve the system tracking performance. In the process of the iterative CKF algorithm, nonlinear means are used. The method makes full use of measurement information and estimates the target velocity acceleration model parameters through the neural network, which is used as the input of the CKF to modify the process parameters of CKF and improve the state estimation accuracy. At the same time, the limited lower bound method is used to ensure that the gain reaches the lower bound bottom line of the precision demand, so that it does not tend to zero with time, so as to avoid affecting its rapid response ability during maneuvering and so that the prediction error is also controlled within the range of the precision demand. The simulation and experimental results show the superiority of the method and make the system fully meet the design requirements.


  • Design of a Peculiar TM35 Transverse Mode THz Extended Interaction Oscillator for Multibeam kW-Class Operation

    by Muhammad Shahab Sarwar, Xinjian Niu, Tianzhong Zhang, Yinghui Liu

    A terahertz (THz) extended interaction oscillator (EIO) operating in a peculiar ${\text{TM}_{35}}$ transverse mode and ${2\pi}$ longitudinal mode has been proposed here. The aim is to generate a high-power THz radiation source with an enlarged cavity. This transverse ${\text{TM}_{mn}}$ mode (with $m=3$ , $n=5$ ) has an exceptionally large cross section which was unattainable with fundamental mode (i.e., ${\text{TM}_{11}}$ ) or even with higher order mode (HOM, i.e., ${\text{TM}_{31}}$ ) THz-EIOs. The overmoded structure (i.e., $n>1$ ) makes this mode most suitable for three-beam operation by maintaining a sufficiently large separation of 1.0 mm between adjacent beam tunnels. The analytical formalism for setting up an initial ladder-like RF circuit has been discussed along with the field distribution analysis of the ${\text{TM}_{35}}$ mode. The stability analysis, which is crucial for this complex mode, shows a mode interval of 0.4 kV between the operating voltage ranges of the desired ${2\pi}$ -mode and the nearest competing ${\pi/16}$ -mode. Furthermore, an external circuit with an external quality-factor $Q_e =$ 333 has been designed for a stable operation. To demonstrate the effectiveness of this mode in yielding a kilowatt-class THz radiation source, a 0.368 THz ${\text{TM}_{35}}$ three-beam EIO has been simulated both in computer simulation technology (CST)-particle-in-cell (PIC) and MAGIC-3D software. CST-PIC simulations predict an output power of 1.1 kW at a beam voltage of 18.1 kV at an overall beam current of 2.7 A (3 $\times$ 0.9 A). Furthermore, the skin and ohmic losses have been incorporated. These results are validated by MAGIC-PIC simulations which predict an output power of 1.2 kW with an efficiency of 2.45%. This design requiring a relatively small power supply is a potential candidate for compact high-power portable THz systems for present and future applications.


  • Open Access

    Insights into bone morphogenetic proteins in cardiovascular diseases

    by Di Ye, Yinghui Liu, Heng Pan, Yongqi Feng, Xiyi Lu, Liren Gan, Jun Wan, Jing Ye

    Bone morphogenetic proteins (BMPs) are secretory proteins belonging to the transforming growth factor-β (TGF-β) superfamily. These proteins play important roles in embryogenesis, bone morphogenesis, blood vessel remodeling and the development of various organs. In recent years, as research has progressed, BMPs have been found to be closely related to cardiovascular diseases, especially atherosclerosis, vascular calcification, cardiac remodeling, pulmonary arterial hypertension (PAH) and hereditary hemorrhagic telangiectasia (HHT). In this review, we summarized the potential roles and related mechanisms of the BMP family in the cardiovascular system and focused on atherosclerosis and PAH.


  • Design and Cold Test on the Slow Wave Structure of a Wide-Voltage Tuned and High-Power Extended Interaction Oscillator in W-Band

    by Jie Qing, Xinjian Niu, Yinghui Liu, Guo Guo, Hongfu Li

    In order to obtain continuously tunable high-power output in $W$ -band, the slow wave structure (SWS) of a wide tuned and high-power extended interaction oscillator (EIO) was designed and studied in this article. The structure of the designed circuit was described while the operating characteristics were analyzed. The SWS not only has high power output capability but also operates near standing waves with a wide electronic tuning range. The EIO can operate over an electronic tuning range of 1.36 GHz in ensuring the output power no less than 1.6 kW, where the maximum output power over 4.5 kW is obtained at 43.8 kV and 2 A from the simulation. The wide tuning range and the high output power are achieved by increasing the number of periods with offsetting the coupling hole and beam voltage and current in order to match with high impedance modes near to 2 $\pi $ . The SWS was processed and cold tested, and its S-parameter distribution was close to the simulation result. The designed 94-GHz extended interaction oscillation can be effectively used to generate wide tuned and high-power microwave radiation sources in $W$ -band.