Jie Qing
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jie Qing has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
Xinjian Niu
Terahertz Science and Technology Research Center, School of Electronics and Engineering, University of Electronic Science and Technology of China, Chengdu, China
6 shared publicationsHongfu Li
Terahertz Science and Technology Research Center, School of Electronics and Engineering, University of Electronic Science and Technology of China, Chengdu, China
5 shared publications- Guo Guo
University of Electronic Science and Technology of China
4 shared publications - Yinghui Liu
University of Electronic Science and Technology of China
4 shared publications - Tianzhong Zhang
University of Electronic Science and Technology of China (UESTC)
3 shared publications Guo Guo
University of Electronic Science and Technology of China , Chengdu 610054, China
2 shared publications
Latest Publications
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (3) , 307-318
Building a Comprehensive Complex Permittivity Library for THz Radio Planning Using Quasi-Optical Measurements
The lack of an accessible comprehensive reliable dataset of material properties at terahertz (THz) frequencies is a significant roadblock for the development of accurate propagation models for THz wireless systems. To fill this gap, in this article, we extract the complex permittivity of 75 different home and commercial furnishings categorized into fabric, leather, plastic, stone, and wood from quasi-optical measurements. Given that quasi-optical transmission measurement standards are not developed yet, we utilize both vector network analysis and time-domain spectroscopy under collimated and focused beam illumination to highlight the differences and the challenges that precise material extraction faces at THz, and to compute average complex permittivities with confidence intervals.
- 13 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (3) , 307-318
Building a Comprehensive Complex Permittivity Library for THz Radio Planning Using Quasi-Optical Measurements
The lack of an accessible comprehensive reliable dataset of material properties at terahertz (THz) frequencies is a significant roadblock for the development of accurate propagation models for THz wireless systems. To fill this gap, in this article, we extract the complex permittivity of 75 different home and commercial furnishings categorized into fabric, leather, plastic, stone, and wood from quasi-optical measurements. Given that quasi-optical transmission measurement standards are not developed yet, we utilize both vector network analysis and time-domain spectroscopy under collimated and focused beam illumination to highlight the differences and the challenges that precise material extraction faces at THz, and to compute average complex permittivities with confidence intervals.
- 25 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (2) , 283-292
Loss Characteristics of TeraHertz Surface Waves on Laser Micromachined Textured Metals
For the application of geometrically-induced THz surface wave technology for communication and sensing, a critical analysis of the propagation characteristics (i.e. dispersion and attenuation) for different textured surfaces should be studied and benchmarked. For the broadband characterisation of archetypal textured surfaces (e.g. corrugated plane, two-dimensional array of blind holes and bed of nails) supporting THz transverse magnetic (i.e., p-polarized) surface waves, we employ time-domain spectroscopy and edge-diffraction coupling methods. Measurements of laser micromachined prototypes demonstrate strong frequency-dependent dispersion and the large impact that surface roughness of the order of few μm has on the path loss, increasing it by a factor ranging from 1.6 to 4.3 compared to smooth textured surfaces. Together with numerical modelling, we disentangle all loss mechanisms (namely, ohmic, scattering, propagation divergence and phase mismatch) and highlight the challenge of loss estimation due to surface roughness in highly confined THz surface waves.
- 25 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (2) , 283-292
Loss Characteristics of TeraHertz Surface Waves on Laser Micromachined Textured Metals
For the application of geometrically-induced THz surface wave technology for communication and sensing, a critical analysis of the propagation characteristics (i.e. dispersion and attenuation) for different textured surfaces should be studied and benchmarked. For the broadband characterisation of archetypal textured surfaces (e.g. corrugated plane, two-dimensional array of blind holes and bed of nails) supporting THz transverse magnetic (i.e., p-polarized) surface waves, we employ time-domain spectroscopy and edge-diffraction coupling methods. Measurements of laser micromachined prototypes demonstrate strong frequency-dependent dispersion and the large impact that surface roughness of the order of few μm has on the path loss, increasing it by a factor ranging from 1.6 to 4.3 compared to smooth textured surfaces. Together with numerical modelling, we disentangle all loss mechanisms (namely, ohmic, scattering, propagation divergence and phase mismatch) and highlight the challenge of loss estimation due to surface roughness in highly confined THz surface waves.
- 26 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (2) , 381-385
Design and Cold Test on the Slow Wave Structure of a Wide-Voltage Tuned and High-Power Extended Interaction Oscillator in W-Band
In order to obtain continuously tunable high-power output in $W$ -band, the slow wave structure (SWS) of a wide tuned and high-power extended interaction oscillator (EIO) was designed and studied in this article. The structure of the designed circuit was described while the operating characteristics were analyzed. The SWS not only has high power output capability but also operates near standing waves with a wide electronic tuning range. The EIO can operate over an electronic tuning range of 1.36 GHz in ensuring the output power no less than 1.6 kW, where the maximum output power over 4.5 kW is obtained at 43.8 kV and 2 A from the simulation. The wide tuning range and the high output power are achieved by increasing the number of periods with offsetting the coupling hole and beam voltage and current in order to match with high impedance modes near to 2 $\pi $ . The SWS was processed and cold tested, and its S-parameter distribution was close to the simulation result. The designed 94-GHz extended interaction oscillation can be effectively used to generate wide tuned and high-power microwave radiation sources in $W$ -band.
- 26 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 51 (2) , 381-385
Design and Cold Test on the Slow Wave Structure of a Wide-Voltage Tuned and High-Power Extended Interaction Oscillator in W-Band
In order to obtain continuously tunable high-power output in $W$ -band, the slow wave structure (SWS) of a wide tuned and high-power extended interaction oscillator (EIO) was designed and studied in this article. The structure of the designed circuit was described while the operating characteristics were analyzed. The SWS not only has high power output capability but also operates near standing waves with a wide electronic tuning range. The EIO can operate over an electronic tuning range of 1.36 GHz in ensuring the output power no less than 1.6 kW, where the maximum output power over 4.5 kW is obtained at 43.8 kV and 2 A from the simulation. The wide tuning range and the high output power are achieved by increasing the number of periods with offsetting the coupling hole and beam voltage and current in order to match with high impedance modes near to 2 $\pi $ . The SWS was processed and cold tested, and its S-parameter distribution was close to the simulation result. The designed 94-GHz extended interaction oscillation can be effectively used to generate wide tuned and high-power microwave radiation sources in $W$ -band.
- 5 August 2022
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 43 (7-8) , 670-682
Design and Experimental of a Terahertz Multi-Gap Extended Interaction Oscillator Operating in High-Order Mode
- 5 August 2022
- Published by Springer Nature in Journal of Infrared, Millimeter, and Terahertz Waves
- Vol. 43 (7-8) , 670-682
Design and Experimental of a Terahertz Multi-Gap Extended Interaction Oscillator Operating in High-Order Mode
- 1 July 2022
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 93 (7) , 074704
Research on coupled cavity mechanical tuning extended interaction oscillator with broad tuning range
This paper proposes a new way to improve the tuning range of the extended interaction oscillator (EIO). Compared with the conventional EIO structure, the fundamental wave changes from the forward wave to the backward wave when the circuit structure changes from the strong-coupling characteristic of the grating to the weak-coupling characteristic. Simultaneously, the tuning range of the EIO can be greatly enhanced by mechanically tuning the coupling cavity. The results show that, compared with the strong-coupling structure of the grating, the extended interaction oscillation circuit has stronger dispersion sensitivity and greater frequency tuning characteristics under the weak-coupling characteristics of the grating. By mechanically tuning the width of the coupling cavity by 0.8 mm, its center frequency can be varied by 9.5 GHz. This paper also studies and compares the electronic displacement jump phenomenon that occurs in the mechanical tuning process. Similar to the electronic voltage tuning, the output dips suddenly at the operating point of the coupling mismatch. The effective output can be obtained by changing the operating mode in conjunction with electronic tuning. This article provides a new reference method for expanding the tuning range of the extended interaction oscillator.
- 1 July 2022
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 93 (7) , 074704
Research on coupled cavity mechanical tuning extended interaction oscillator with broad tuning range
This paper proposes a new way to improve the tuning range of the extended interaction oscillator (EIO). Compared with the conventional EIO structure, the fundamental wave changes from the forward wave to the backward wave when the circuit structure changes from the strong-coupling characteristic of the grating to the weak-coupling characteristic. Simultaneously, the tuning range of the EIO can be greatly enhanced by mechanically tuning the coupling cavity. The results show that, compared with the strong-coupling structure of the grating, the extended interaction oscillation circuit has stronger dispersion sensitivity and greater frequency tuning characteristics under the weak-coupling characteristics of the grating. By mechanically tuning the width of the coupling cavity by 0.8 mm, its center frequency can be varied by 9.5 GHz. This paper also studies and compares the electronic displacement jump phenomenon that occurs in the mechanical tuning process. Similar to the electronic voltage tuning, the output dips suddenly at the operating point of the coupling mismatch. The effective output can be obtained by changing the operating mode in conjunction with electronic tuning. This article provides a new reference method for expanding the tuning range of the extended interaction oscillator.
- 13 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4540-4545
Research and Experiment of a W-Band High-Power Extended Interaction Oscillator With High Voltage
In order to obtain a high-power radiation source in the W -band, a 95-GHz extended interaction oscillator (EIO) with high voltage was designed and tested in this article. The overall structure of the designed EIO is introduced, and the simulation results of the slow wave structure are shown. Experimental test results show that, at a high duty cycle of 50%, the 95.1-GHz radiation peak power of 3.5 kW is achieved when an electron beam with 2 A and 42.8 kV is injected. The experimental test of the designed EIO has guiding significance for miniaturized vacuum devices to obtain high-power radiation source.
- 13 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (8) , 4540-4545
Research and Experiment of a W-Band High-Power Extended Interaction Oscillator With High Voltage
In order to obtain a high-power radiation source in the W -band, a 95-GHz extended interaction oscillator (EIO) with high voltage was designed and tested in this article. The overall structure of the designed EIO is introduced, and the simulation results of the slow wave structure are shown. Experimental test results show that, at a high duty cycle of 50%, the 95.1-GHz radiation peak power of 3.5 kW is achieved when an electron beam with 2 A and 42.8 kV is injected. The experimental test of the designed EIO has guiding significance for miniaturized vacuum devices to obtain high-power radiation source.
- 1 April 2022
- Published by AIP Publishing in Physics of Plasmas
- Vol. 29 (4) , 043104
Design and research of a novel structure for extended interaction oscillators
To improve the bandwidth and output of an extended interaction oscillator (EIO), this article proposes a new structure and tests its S parameters. Through simulation analysis and theoretical calculations, it is verified that the structure cannot only increase the bandwidth of the device but also suppress the influence of weak-coupling characteristics of the grating and increases the power capacity of the device. The optimized structure was analyzed by particle-in-cell simulations. The results show that the X-EIO structure has a wide electrical tuning range of 800 MHz under the condition that the effective output is not less than 150 W. The dual-coupling hole of this structure cannot only obtain the same frequency and the same power output synchronously but also has higher efficiency and greater power than the traditional single-hole output. With oxygen-free copper as the background material, at 20.8 kV, 1 A electron beam injection, both coupling holes can obtain a power of more than 2.6 kW, and the highest output efficiency reaches 12.67%. The slow-wave structure has been assembled and tested, and the distribution result of its S parameter is similar to the simulation result, which can achieve broadband adjustable output.
- 1 April 2022
- Published by AIP Publishing in Physics of Plasmas
- Vol. 29 (4) , 043104
Design and research of a novel structure for extended interaction oscillators
To improve the bandwidth and output of an extended interaction oscillator (EIO), this article proposes a new structure and tests its S parameters. Through simulation analysis and theoretical calculations, it is verified that the structure cannot only increase the bandwidth of the device but also suppress the influence of weak-coupling characteristics of the grating and increases the power capacity of the device. The optimized structure was analyzed by particle-in-cell simulations. The results show that the X-EIO structure has a wide electrical tuning range of 800 MHz under the condition that the effective output is not less than 150 W. The dual-coupling hole of this structure cannot only obtain the same frequency and the same power output synchronously but also has higher efficiency and greater power than the traditional single-hole output. With oxygen-free copper as the background material, at 20.8 kV, 1 A electron beam injection, both coupling holes can obtain a power of more than 2.6 kW, and the highest output efficiency reaches 12.67%. The slow-wave structure has been assembled and tested, and the distribution result of its S parameter is similar to the simulation result, which can achieve broadband adjustable output.
- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (4) , 1081-1086
THz Radiation From a TM₅₁ Mode Sheet Beam Extended Interaction Oscillator With Low Injection
This article designs and studies a low-injection sheet beam extended interaction oscillator (EIO) circuit that uses TM 51 -$2\pi $ mode operation. Through the combination of theoretical analysis and particle-in-cell (PIC) simulation, the mode characteristics and output characteristics of the circuit are studied. Theory and dispersion analyses on the designed EIO demonstrated that the special circuit structure and the optimized cutoff frequency effectively suppress nonoperating lower order modes. Only TM 51 -$2\pi $ mode can support effective beam–wave interaction in the designed EIO, which has a benefit of increasing the frequency and size of miniaturized devices. The designed EIO can achieve high-frequency microwave radiation output with higher energy under low injection (low current density and low voltage). At a certain surface loss, when an electron beam with 1 A and 19.6 kV is injected, the 0.36-terahertz (THz) radiation power of 200 W is achieved. The slow wave structure has been presented. The designed circuit structure can be applied to high-frequency THz radiation source devices.- 22 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 50 (4) , 1081-1086
THz Radiation From a TM₅₁ Mode Sheet Beam Extended Interaction Oscillator With Low Injection
This article designs and studies a low-injection sheet beam extended interaction oscillator (EIO) circuit that uses TM 51 -$2\pi $ mode operation. Through the combination of theoretical analysis and particle-in-cell (PIC) simulation, the mode characteristics and output characteristics of the circuit are studied. Theory and dispersion analyses on the designed EIO demonstrated that the special circuit structure and the optimized cutoff frequency effectively suppress nonoperating lower order modes. Only TM 51 -$2\pi $ mode can support effective beam–wave interaction in the designed EIO, which has a benefit of increasing the frequency and size of miniaturized devices. The designed EIO can achieve high-frequency microwave radiation output with higher energy under low injection (low current density and low voltage). At a certain surface loss, when an electron beam with 1 A and 19.6 kV is injected, the 0.36-terahertz (THz) radiation power of 200 W is achieved. The slow wave structure has been presented. The designed circuit structure can be applied to high-frequency THz radiation source devices.- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Research on 96GHz sheet-beam EIO
Based on the sheet-beam EIO structure, this paper studies the cold cavity parameters and particle simulation of the 96 GHz sheet-beam EIO. The result shows average output power of the structure is 223W in TM 31 and the electron beam modulation depth is 26.1% with the voltage of 11.4kV and the current of 1.6A.
- 1 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Research on 96GHz sheet-beam EIO
Based on the sheet-beam EIO structure, this paper studies the cold cavity parameters and particle simulation of the 96 GHz sheet-beam EIO. The result shows average output power of the structure is 223W in TM 31 and the electron beam modulation depth is 26.1% with the voltage of 11.4kV and the current of 1.6A.