Louis Ngai Yuen Wong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Louis Ngai Yuen Wong has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
Cee Ing Teh
Nanyang Technological University
5 shared publicationsJun Peng
Department of Earth Sciences The University of Hong Kong Hong Kong China
4 shared publicationsYimeng Zhou
Department of Earth Sciences, The University of Hong Kong, Hong Kong, China
4 shared publicationsHui Zhou
State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, Hubei, 430071, China
3 shared publicationsKeith Ki Chun Tse
Department of Earth Sciences, The University of Hong Kong, Hong Kong, China
3 shared publicationsFanzhen Meng
Department of Earth Sciences, The University of Hong Kong, Pokfulam, Hong Kong, China
2 shared publications
Latest Publications
- Open Access
- 14 October 2026
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
Data-driven machine learning models for predicting long-term ground settlement of energy storage salt caverns
- 14 October 2026
- Published by Elsevier in Journal of Rock Mechanics and Geotechnical Engineering
Open AccessData-driven machine learning models for predicting long-term ground settlement of energy storage salt caverns
- Open Access
- 5 December 2025
- Published by Atlantis Press SARL
- p. 596-603
Understanding Optimal Rock Cover Thickness in Cavern Design Using RocSupport and RS2: A New Perspective
- 5 December 2025
- Published by Atlantis Press SARL
- p. 596-603
Open AccessUnderstanding Optimal Rock Cover Thickness in Cavern Design Using RocSupport and RS2: A New Perspective
- Open Access
- 28 November 2025
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 84 (12) , 637
A review of cement-soil in engineering geological applications: mixing mechanisms, mechanical behavior, and constitutive models
Cement-soil stabilization is a fundamental ground improvement technique in engineering geology, critical for constructing foundations, embankments, and infrastructure on weak or problematic soils. By incorporating cementitious materials with in-situ soil, this method increases bearing capacity and minimizes settlement, thereby increasing the safety and longevity of geotechnical structures. This review comprehensively examines the mechanisms of cement-soil stabilization, including cement hydration and the complex interactions among clay particles, inorganic salts and organic matter, which together form a strengthened soil matrix. The mechanical performance behavior of cement-soil is influenced by binder and soil properties, as well as mixing and curing conditions. Advances in constitutive modeling transitioning from empirical to sophisticated frameworks, are reviewed and highlighted for their ability to capture the multifaceted behavior of cement-soils under diverse conditions. The review identifies key future research directions, including the development of novel materials and additives, refinement of constitutive models and simulation techniques, and comprehensive evaluation of long-term durability and environmental impacts. Emphasis is placed on in-situ testing techniques, particularly for offshore engineering applications, and on the adoption of sustainable alternatives to Ordinary Portland Cement in light of its high energy demands and carbon emissions. Promising substitutes such as alkali-activated binary blended mortars and belite-ye’elimite-based binders are suggested for their potential to strengthen soft soil, reduce emissions, and shorten curing times. This review provides a critical foundation for advancing sustainable and effective cement-soil stabilization strategies in engineering geology.
- 28 November 2025
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 84 (12) , 637
Open AccessA review of cement-soil in engineering geological applications: mixing mechanisms, mechanical behavior, and constitutive models
Cement-soil stabilization is a fundamental ground improvement technique in engineering geology, critical for constructing foundations, embankments, and infrastructure on weak or problematic soils. By incorporating cementitious materials with in-situ soil, this method increases bearing capacity and minimizes settlement, thereby increasing the safety and longevity of geotechnical structures. This review comprehensively examines the mechanisms of cement-soil stabilization, including cement hydration and the complex interactions among clay particles, inorganic salts and organic matter, which together form a strengthened soil matrix. The mechanical performance behavior of cement-soil is influenced by binder and soil properties, as well as mixing and curing conditions. Advances in constitutive modeling transitioning from empirical to sophisticated frameworks, are reviewed and highlighted for their ability to capture the multifaceted behavior of cement-soils under diverse conditions. The review identifies key future research directions, including the development of novel materials and additives, refinement of constitutive models and simulation techniques, and comprehensive evaluation of long-term durability and environmental impacts. Emphasis is placed on in-situ testing techniques, particularly for offshore engineering applications, and on the adoption of sustainable alternatives to Ordinary Portland Cement in light of its high energy demands and carbon emissions. Promising substitutes such as alkali-activated binary blended mortars and belite-ye’elimite-based binders are suggested for their potential to strengthen soft soil, reduce emissions, and shorten curing times. This review provides a critical foundation for advancing sustainable and effective cement-soil stabilization strategies in engineering geology.
- Open Access
- 16 June 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 58 (9) , 11113-11127
Att-YOLO: A Real-Time Rock Core Classification and Localization Deep Learning Model
Rock core logging plays a crucial role in acquiring geological and geotechnical information. However, conventional manual core logging is labor-intensive and requires extensive expertise. To address these challenges, this study proposes a deep learning-based object detection model called Att-YOLO, to automate rock core classification and localization tasks. The proposed model incorporates the convolutional block attention module (CBAM) into the backbone and integrates the YOLOv5 PAN-FPN structure in the neck. A database of corebox images is compiled from Hong Kong ground investigation reports. Furthermore, transfer learning is employed during the training process to expedite model convergence. The performance of Att-YOLO model is evaluated on a test set, achieving the highest mean average precision (mAP) compared to other prevalent algorithms. Further visualization experiments are conducted to investigate the causes of errors and feature processing capabilities across varying model depths. Ablation studies are also implemented to demonstrate the effectiveness of the CBAM module. Finally, the extra corebox images from various locations in Hong Kong are collected and used to verify the robustness of the Att-YOLO model. The proposed model exhibits strong generalization ability for multi-scale objects from different projects, proving its effectiveness in processing rock core data.
- 16 June 2025
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 58 (9) , 11113-11127
Open AccessAtt-YOLO: A Real-Time Rock Core Classification and Localization Deep Learning Model
Rock core logging plays a crucial role in acquiring geological and geotechnical information. However, conventional manual core logging is labor-intensive and requires extensive expertise. To address these challenges, this study proposes a deep learning-based object detection model called Att-YOLO, to automate rock core classification and localization tasks. The proposed model incorporates the convolutional block attention module (CBAM) into the backbone and integrates the YOLOv5 PAN-FPN structure in the neck. A database of corebox images is compiled from Hong Kong ground investigation reports. Furthermore, transfer learning is employed during the training process to expedite model convergence. The performance of Att-YOLO model is evaluated on a test set, achieving the highest mean average precision (mAP) compared to other prevalent algorithms. Further visualization experiments are conducted to investigate the causes of errors and feature processing capabilities across varying model depths. Ablation studies are also implemented to demonstrate the effectiveness of the CBAM module. Finally, the extra corebox images from various locations in Hong Kong are collected and used to verify the robustness of the Att-YOLO model. The proposed model exhibits strong generalization ability for multi-scale objects from different projects, proving its effectiveness in processing rock core data.
- 1 April 2025
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
- Vol. 178 (2) , 195-207
Energy transfer and stress wave propagation during SPT through energy measurement and PIV
The blow counts in standard penetration tests (SPTs) require suitable corrections to account for energy losses. Over 4000 energy measurements collected from four test sites across Hong Kong were collected and analysed in this study. On average, for all instrumented hammer blows, approximately 62% of the theoretical hammer potential energy was transferred to the drill rod assembly. Using high-speed camera imagery and particle image velocimetry (PIV), the detailed mechanism of stress wave propagation was visualised and assessed. This revealed new details and allowed nuances in the results of routine energy measurements to be interpreted in new light. The results showed that the initial compressive wave is reflected as a tensile wave for low end-restraint at the SPT sampler and as a second compressive wave for high end-restraint. Commonly observed discrepancies between theoretical and measured speeds of wave propagation were explored. Energy loss arises from friction during free-fall of the hammer, at the anvil and from other sources such as the horizontal motion of the hammer–anvil system. The proportion of each major source of energy loss was quantified.
- 1 April 2025
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
- Vol. 178 (2) , 195-207
Energy transfer and stress wave propagation during SPT through energy measurement and PIV
The blow counts in standard penetration tests (SPTs) require suitable corrections to account for energy losses. Over 4000 energy measurements collected from four test sites across Hong Kong were collected and analysed in this study. On average, for all instrumented hammer blows, approximately 62% of the theoretical hammer potential energy was transferred to the drill rod assembly. Using high-speed camera imagery and particle image velocimetry (PIV), the detailed mechanism of stress wave propagation was visualised and assessed. This revealed new details and allowed nuances in the results of routine energy measurements to be interpreted in new light. The results showed that the initial compressive wave is reflected as a tensile wave for low end-restraint at the SPT sampler and as a second compressive wave for high end-restraint. Commonly observed discrepancies between theoretical and measured speeds of wave propagation were explored. Energy loss arises from friction during free-fall of the hammer, at the anvil and from other sources such as the horizontal motion of the hammer–anvil system. The proportion of each major source of energy loss was quantified.
- Open Access
- 6 March 2024
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 57 (7) , 4607-4634
Intermediate Principal Stress Effects on the 3D Cracking Behavior of Flawed Rocks Under True Triaxial Compression
Crack initiation, growth, and coalescence in flawed rocks have been extensively studied for 2D (planar, penetrating) flaws under uniaxial/biaxial compression. However, little is known as to the mechanisms and processes of cracking from 3D flaws under true triaxial compression, where the intermediate principal stress ( $$\sigma _2$$ ) is distinguished from the major and minor principal stresses. In this work, we systematically investigate the effects of $$\sigma _2$$ on the 3D cracking behavior of rock specimens with preexisting flaws, through the use of mechanistic simulations of mixed-mode fracture in rocks. We explore how two characteristics of $$\sigma _2$$ , namely, (i) its orientation with respect to the flaw and (ii) its magnitude, affect two aspects of the cracking behavior, namely, (i) the cracking pattern and (ii) the peak stress. Results show that the orientation of $$\sigma _2$$ exerts more control over the cracking pattern than the flaw inclination angle. The peak stress becomes highest when $$\sigma _1$$ is parallel to the flaw, whereas it becomes lowest when $$\sigma _2$$ is parallel to the flaw. Also, the effects of $$\sigma _2$$ magnitude are more significant when $$\sigma _2$$ becomes more oblique to the flaw plane. On the basis of our observations, we propose mechanisms underlying the cracking behavior of 3D flawed rocks under true triaxial compression. Highlights: The effects of the intermediate principal stress ( $$\sigma _2$$ ) on the 3D cracking behavior of flawed rocks under true triaxial compression are systematically investigated. The orientation of $$\sigma _2$$ exerts more control over the cracking pattern than the flaw inclination angle. The effects of $$\sigma _2$$ magnitude become more significant when $$\sigma _2$$ are more oblique to the flaw plane. Mechanisms underlying the cracking behavior of 3D flawed rocks under true triaxial compression are proposed based on the observations made.- 6 March 2024
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 57 (7) , 4607-4634
Open AccessIntermediate Principal Stress Effects on the 3D Cracking Behavior of Flawed Rocks Under True Triaxial Compression
Crack initiation, growth, and coalescence in flawed rocks have been extensively studied for 2D (planar, penetrating) flaws under uniaxial/biaxial compression. However, little is known as to the mechanisms and processes of cracking from 3D flaws under true triaxial compression, where the intermediate principal stress ( $$\sigma _2$$ ) is distinguished from the major and minor principal stresses. In this work, we systematically investigate the effects of $$\sigma _2$$ on the 3D cracking behavior of rock specimens with preexisting flaws, through the use of mechanistic simulations of mixed-mode fracture in rocks. We explore how two characteristics of $$\sigma _2$$ , namely, (i) its orientation with respect to the flaw and (ii) its magnitude, affect two aspects of the cracking behavior, namely, (i) the cracking pattern and (ii) the peak stress. Results show that the orientation of $$\sigma _2$$ exerts more control over the cracking pattern than the flaw inclination angle. The peak stress becomes highest when $$\sigma _1$$ is parallel to the flaw, whereas it becomes lowest when $$\sigma _2$$ is parallel to the flaw. Also, the effects of $$\sigma _2$$ magnitude are more significant when $$\sigma _2$$ becomes more oblique to the flaw plane. On the basis of our observations, we propose mechanisms underlying the cracking behavior of 3D flawed rocks under true triaxial compression. Highlights: The effects of the intermediate principal stress ( $$\sigma _2$$ ) on the 3D cracking behavior of flawed rocks under true triaxial compression are systematically investigated. The orientation of $$\sigma _2$$ exerts more control over the cracking pattern than the flaw inclination angle. The effects of $$\sigma _2$$ magnitude become more significant when $$\sigma _2$$ are more oblique to the flaw plane. Mechanisms underlying the cracking behavior of 3D flawed rocks under true triaxial compression are proposed based on the observations made. - 26 August 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (11) , 8503-8541
Automatic, Point-Wise Rock Image Enhancement by Novel Unsupervised Deep Learning: Dataset Establishment and Model Development
- 26 August 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (11) , 8503-8541
Automatic, Point-Wise Rock Image Enhancement by Novel Unsupervised Deep Learning: Dataset Establishment and Model Development
- 19 May 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (8) , 6135-6142
Extensive Propagation of 3D Wing Cracks Under Compression
- 19 May 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (8) , 6135-6142
Extensive Propagation of 3D Wing Cracks Under Compression
- 10 February 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (5) , 3825-3841
Novel Rock Image Classification: The Proposal and Implementation of HKUDES_Net
- 10 February 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (5) , 3825-3841
Novel Rock Image Classification: The Proposal and Implementation of HKUDES_Net
- RetractionOpen Access
- 8 February 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (5) , 3859
Retraction Note: Novel Rock Image Classification: The Proposal and Implementation of RockNet
- 8 February 2023
- Published by Springer Nature in Rock Mechanics and Rock Engineering
- Vol. 56 (5) , 3859
RetractionOpen AccessRetraction Note: Novel Rock Image Classification: The Proposal and Implementation of RockNet