Jurkka Kuusipalo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Jurkka Kuusipalo has a total of 133 co-authors. Here are the top co-authors by number of shared publications:
- Hannu Teisala
Tampere University of Technology
25 shared publications - Martti Toivakka
Laboratory of Natural Materials Technology, Åbo Akademi University, Turku, Finland
25 shared publications Mikko Tuominen
Laboratory of Materials Science, Tampere University of Technology, Tampere, Finland
23 shared publications- Jyrki M. Mäkelä
Laboratory of Physics, Tampere University of Technology, Tampere, Finland
21 shared publications - Janne Haapanen
Laboratory of Physics, Tampere University of Technology, Tampere, Finland
14 shared publications Mikko Aromaa
Laboratory of Physics, Tampere University of Technology, Tampere, Finland
14 shared publications
Latest Publications
- Open Access
- 22 June 2026
- Published by Wiley in Surface and Interface Analysis
- Vol. 58 (11) , 785-798
Imaging Methods for Analyzing Adhesion in Extrusion Coating
Extrusion coating is a common method to produce materials for the packaging industry. One of the most important properties in extrusion‐coated structures is adhesion between the substrate and the coating. Analyzing adhesion of samples produced by extrusion coating in a standardized way can be challenging, and especially, quantitative data are often hard to obtain. A commonly used method is visual adhesion evaluation. The object of this research is to present how different imaging methods can be used as a support to visual evaluation by obtaining more profound information. Other aspects looked into are the possibility of studying how adhesion is affected by adjusting process parameters during the coating process or using modified paperboard substrates. The samples studied in this research are different paperboard substrates coated with polyethylene or polyethylene terephthalate. Optical microscopy, profilometry, and X‐ray microtomography are used to image selected samples. The results show that versatile information can be obtained, for example, about the intensity of physical contact between the layers, the type of bonding occurred, and effects of the nature of the substrate surface.
- 22 June 2026
- Published by Wiley in Surface and Interface Analysis
- Vol. 58 (11) , 785-798
Open AccessImaging Methods for Analyzing Adhesion in Extrusion Coating
Extrusion coating is a common method to produce materials for the packaging industry. One of the most important properties in extrusion‐coated structures is adhesion between the substrate and the coating. Analyzing adhesion of samples produced by extrusion coating in a standardized way can be challenging, and especially, quantitative data are often hard to obtain. A commonly used method is visual adhesion evaluation. The object of this research is to present how different imaging methods can be used as a support to visual evaluation by obtaining more profound information. Other aspects looked into are the possibility of studying how adhesion is affected by adjusting process parameters during the coating process or using modified paperboard substrates. The samples studied in this research are different paperboard substrates coated with polyethylene or polyethylene terephthalate. Optical microscopy, profilometry, and X‐ray microtomography are used to image selected samples. The results show that versatile information can be obtained, for example, about the intensity of physical contact between the layers, the type of bonding occurred, and effects of the nature of the substrate surface.
- Open Access
- 11 June 2023
- Published by Springer Nature in Cellulose
- Vol. 30 (11) , 6945-6958
Tailoring the performance of nanocellulose-based multilayer-barrier paperboard using biodegradable-thermoplastics, pigments, and plasticizers
In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose or carboxymethylated cellulose nanofibrils) followed by extrusion coating of biodegradable thermoplastics (polylactic acid, polybutylene adipate terephthalate and polybutylene succinate). Hyperplaty kaolin pigments were blended in different ratios into nanocellulose to tailor the barrier properties of the multilayer structure and to study their influence on adhesion to the thermoplastic top layer. Influence of a plasticizer (glycerol) on flexibility and barrier performance of the multilayer structure was also examined. Water vapor permeance for the multilayer paperboard was below that of control single-layer thermoplastic materials, and oxygen permeance of the coated structure was similar or lower than that of pure nanocellulose films. Glycerol as a plasticizer further lowered the oxygen permeance and kaolin addition improved the adhesion at the nanocellulose/thermoplastic interface. The results provide insight into the role played by nanocelluloses, thermoplastics, pigments, and plasticizers on the barrier properties when these elements are processed together into multilayer structures, and paves the way for industrial production of sustainable packaging.
- 11 June 2023
- Published by Springer Nature in Cellulose
- Vol. 30 (11) , 6945-6958
Open AccessTailoring the performance of nanocellulose-based multilayer-barrier paperboard using biodegradable-thermoplastics, pigments, and plasticizers
In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose or carboxymethylated cellulose nanofibrils) followed by extrusion coating of biodegradable thermoplastics (polylactic acid, polybutylene adipate terephthalate and polybutylene succinate). Hyperplaty kaolin pigments were blended in different ratios into nanocellulose to tailor the barrier properties of the multilayer structure and to study their influence on adhesion to the thermoplastic top layer. Influence of a plasticizer (glycerol) on flexibility and barrier performance of the multilayer structure was also examined. Water vapor permeance for the multilayer paperboard was below that of control single-layer thermoplastic materials, and oxygen permeance of the coated structure was similar or lower than that of pure nanocellulose films. Glycerol as a plasticizer further lowered the oxygen permeance and kaolin addition improved the adhesion at the nanocellulose/thermoplastic interface. The results provide insight into the role played by nanocelluloses, thermoplastics, pigments, and plasticizers on the barrier properties when these elements are processed together into multilayer structures, and paves the way for industrial production of sustainable packaging.
- Open Access
- 16 February 2023
- Published by Springer Nature in Research Square
Tailoring the Performance of Nanocellulose-based Multilayer-Barrier Paperboard using Biodegradable-Thermoplastics, Pigments, and Plasticizers
In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose (MFC) or carboxymethylated cellulose nanofibrils (CNF)) followedby extrusion coating of biodegradable thermoplastics (polylactic acid (PLA), polybutylene adipate terephthalate (PBAT) and polybutylene succinate (PBS)). Hyperplaty kaolin pigments were blended in different ratios into nanocellulose to tailor the barrier properties of the multilayer structure and to study their influence on adhesion to the thermoplastic top layer. Influence of a plasticizer (glycerol) on flexibility and barrier performance of the multilayer structure was also examined.Water vapor permeance for the multilayer paperboard was below that of control single-layer thermoplastic materials, and oxygen permeance of the coated structure was similar or lower than that of pure nanocellulose films. Glycerol as a plasticizer further lowered the oxygen permeance and kaolin addition improved the adhesion at the nanocellulose/thermoplastic interface.The results provide insight into the role played by nanocelluloses, thermoplastics, pigments, and plasticizers on the barrier properties when these elements are processed together into multilayer structures, and paves the way for industrial production of sustainable packaging.
- 16 February 2023
- Published by Springer Nature in Research Square
Open AccessTailoring the Performance of Nanocellulose-based Multilayer-Barrier Paperboard using Biodegradable-Thermoplastics, Pigments, and Plasticizers
In this work a multilayer barrier paperboard was produced in a roll-to-roll process by slot-die coating of nanocellulose (microfibrillated cellulose (MFC) or carboxymethylated cellulose nanofibrils (CNF)) followedby extrusion coating of biodegradable thermoplastics (polylactic acid (PLA), polybutylene adipate terephthalate (PBAT) and polybutylene succinate (PBS)). Hyperplaty kaolin pigments were blended in different ratios into nanocellulose to tailor the barrier properties of the multilayer structure and to study their influence on adhesion to the thermoplastic top layer. Influence of a plasticizer (glycerol) on flexibility and barrier performance of the multilayer structure was also examined.Water vapor permeance for the multilayer paperboard was below that of control single-layer thermoplastic materials, and oxygen permeance of the coated structure was similar or lower than that of pure nanocellulose films. Glycerol as a plasticizer further lowered the oxygen permeance and kaolin addition improved the adhesion at the nanocellulose/thermoplastic interface.The results provide insight into the role played by nanocelluloses, thermoplastics, pigments, and plasticizers on the barrier properties when these elements are processed together into multilayer structures, and paves the way for industrial production of sustainable packaging.
- Open Access
- 30 March 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (21) , 12543-12548
Bioplastic films with unusually good oxygen barrier properties based on potato fruit-juice
Valorization of potato fruit juice, a potato starch industry by-product, by developing biopolymer films that could replace petroleum based alternatives in packaging, providing a greener and sustainable solution to industrial waste management.
- 30 March 2021
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 11 (21) , 12543-12548
Open AccessBioplastic films with unusually good oxygen barrier properties based on potato fruit-juice
Valorization of potato fruit juice, a potato starch industry by-product, by developing biopolymer films that could replace petroleum based alternatives in packaging, providing a greener and sustainable solution to industrial waste management.
- Open Access
- 25 August 2020
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 35 (3) , 479-489
Paperboard as a substrate for biocompatible slippery liquid-infused porous surfaces
Slippery liquid-infused porous surfaces or SLIPS were first introduced in 2011 by Wong et al. who reported a bioinspired self-repairing surface with remarkable slippery properties. Generally, production of these surfaces includes fossil-based or expensive materials and processes that are available mainly in laboratory scale. In this study, slippery surfaces with sliding angles of less than 10° are obtained using fibre-based material – paperboard – that is commercially available in large-scale and also cheap compared to substrates generally used in this field. The hierarchical nanostructure that is a necessary condition for appropriate droplet mobility was obtained by the liquid flame spray method. This method is fast, scalable, has a variety of optimization parameters and can be utilized in roll-to-roll technology that is traditional in paper industry. In this work, paperboard serves not only as a substrate, but also as a reservoir for the lubricant, thus it is important to evaluate the affinity of the material for the oils and estimate the capillary movement. Therefore, Cobb and Klemm methods were used when choosing a paperboard material. In addition to synthetic oils, rapeseed oil was also utilized as a lubricant, which potentially leads to eco-friendly and recyclable slippery liquid-infused porous surfaces.
- 25 August 2020
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 35 (3) , 479-489
Open AccessPaperboard as a substrate for biocompatible slippery liquid-infused porous surfaces
Slippery liquid-infused porous surfaces or SLIPS were first introduced in 2011 by Wong et al. who reported a bioinspired self-repairing surface with remarkable slippery properties. Generally, production of these surfaces includes fossil-based or expensive materials and processes that are available mainly in laboratory scale. In this study, slippery surfaces with sliding angles of less than 10° are obtained using fibre-based material – paperboard – that is commercially available in large-scale and also cheap compared to substrates generally used in this field. The hierarchical nanostructure that is a necessary condition for appropriate droplet mobility was obtained by the liquid flame spray method. This method is fast, scalable, has a variety of optimization parameters and can be utilized in roll-to-roll technology that is traditional in paper industry. In this work, paperboard serves not only as a substrate, but also as a reservoir for the lubricant, thus it is important to evaluate the affinity of the material for the oils and estimate the capillary movement. Therefore, Cobb and Klemm methods were used when choosing a paperboard material. In addition to synthetic oils, rapeseed oil was also utilized as a lubricant, which potentially leads to eco-friendly and recyclable slippery liquid-infused porous surfaces.
- Open Access
Dry-Jet Wet Spinning of Thermally Stable Lignin-Textile Grade Polyacrylonitrile Fibers Regenerated from Chloride-Based Ionic Liquids Compounds
In this paper, we report on the use of amorphous lignin, a waste by-product of the paper industry, for the production of high performance carbon fibers (CF) as precursor with improved thermal stability and thermo-mechanical properties. The precursor was prepared by blending of lignin with polyacrylonitrile (PAN), which was previously dissolved in an ionic liquid. The fibers thus produced offered very high thermal stability as compared with the fiber consisting of pure PAN. The molecular compatibility, miscibility, and thermal stability of the system were studied by means of shear rheological measurements. The achieved mechanical properties were found to be related to the temperature-dependent relaxation time (consistence parameter) of the spinning dope and the diffusion kinetics of the ionic liquids from the fibers into the coagulation bath. Furthermore, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical tests (DMA) were utilized to understand in-depth the thermal and the stabilization kinetics of the developed fibers and the impact of lignin on the stabilization process of the fibers. Low molecular weight lignin increased the thermally induced physical shrinkage, suggesting disturbing effects on the semi-crystalline domains of the PAN matrix, and suppressed the chemically induced shrinkage of the fibers. The knowledge gained throughout the present paper allows summarizing a novel avenue to develop lignin-based CF designed with adjusted thermal stability.
Open AccessDry-Jet Wet Spinning of Thermally Stable Lignin-Textile Grade Polyacrylonitrile Fibers Regenerated from Chloride-Based Ionic Liquids Compounds
In this paper, we report on the use of amorphous lignin, a waste by-product of the paper industry, for the production of high performance carbon fibers (CF) as precursor with improved thermal stability and thermo-mechanical properties. The precursor was prepared by blending of lignin with polyacrylonitrile (PAN), which was previously dissolved in an ionic liquid. The fibers thus produced offered very high thermal stability as compared with the fiber consisting of pure PAN. The molecular compatibility, miscibility, and thermal stability of the system were studied by means of shear rheological measurements. The achieved mechanical properties were found to be related to the temperature-dependent relaxation time (consistence parameter) of the spinning dope and the diffusion kinetics of the ionic liquids from the fibers into the coagulation bath. Furthermore, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical tests (DMA) were utilized to understand in-depth the thermal and the stabilization kinetics of the developed fibers and the impact of lignin on the stabilization process of the fibers. Low molecular weight lignin increased the thermally induced physical shrinkage, suggesting disturbing effects on the semi-crystalline domains of the PAN matrix, and suppressed the chemically induced shrinkage of the fibers. The knowledge gained throughout the present paper allows summarizing a novel avenue to develop lignin-based CF designed with adjusted thermal stability.
- Open Access
- 4 March 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (12) , 11920-11927
Continuous Processing of Nanocellulose and Polylactic Acid into Multilayer Barrier Coatings
Recent years have seen an increased interest towards utilizing bio-based and biodegradable materials for barrier packaging applications. Most of the above said materials usually have certain shortcomings that discourage their adoption as a preferred material of choice. Nanocellulose falls into such category. It has excellent barrier against grease, mineral oils and oxygen, but poor tolerance against water vapor, which makes it unsuitable to be used at high humidity. In addition, nanocellulose suspensions’ high viscosity and yield stress already at low solids content, and poor adhesion to substrates create additional challenges for high-speed processing. Polylactic acid (PLA) is another potential candidate that has a reasonably high tolerance against water vapor, but rather poor barrier against oxygen. The current work explores the possibility to combine both these materials into thin multilayer coatings onto paperboard. A custom-built slot-die was used to coat either microfibrillated cellulose (MFC) or cellulose nanocrystals (CNCs) onto pigment-coated baseboard in a continuous process. These were subsequently coated with PLA using a pilot scale extrusion coater. Low-density polyethylene (LDPE) was used as a reference extrusion coating. Cationic starch pre-coating and corona treatment improved the adhesion at nanocellulose/baseboard and nanocellulose/PLA interfaces, respectively. Water vapor transmission rate for nanocellulose + PLA coatings remained lower than the control PLA coating, even at a high relative humidity of 90% (38 oC). The multilayer coating had 98% lower oxygen transmission rate compared to just PLA coated baseboard and heptane vapor transmission rate reduced by 99% in comparison to baseboard. Grease barrier for nanocellulose + PLA coatings increased 5-fold compared to nanocellulose alone and 2-fold compared to PLA alone. This approach of processing nanocellulose and PLA into multiple layers utilizing slot-die and extrusion coating in tandem has the potential to produce a barrier packaging paper that is both 100% bio-based and biodegradable.
- 4 March 2019
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 11 (12) , 11920-11927
Open AccessContinuous Processing of Nanocellulose and Polylactic Acid into Multilayer Barrier Coatings
Recent years have seen an increased interest towards utilizing bio-based and biodegradable materials for barrier packaging applications. Most of the above said materials usually have certain shortcomings that discourage their adoption as a preferred material of choice. Nanocellulose falls into such category. It has excellent barrier against grease, mineral oils and oxygen, but poor tolerance against water vapor, which makes it unsuitable to be used at high humidity. In addition, nanocellulose suspensions’ high viscosity and yield stress already at low solids content, and poor adhesion to substrates create additional challenges for high-speed processing. Polylactic acid (PLA) is another potential candidate that has a reasonably high tolerance against water vapor, but rather poor barrier against oxygen. The current work explores the possibility to combine both these materials into thin multilayer coatings onto paperboard. A custom-built slot-die was used to coat either microfibrillated cellulose (MFC) or cellulose nanocrystals (CNCs) onto pigment-coated baseboard in a continuous process. These were subsequently coated with PLA using a pilot scale extrusion coater. Low-density polyethylene (LDPE) was used as a reference extrusion coating. Cationic starch pre-coating and corona treatment improved the adhesion at nanocellulose/baseboard and nanocellulose/PLA interfaces, respectively. Water vapor transmission rate for nanocellulose + PLA coatings remained lower than the control PLA coating, even at a high relative humidity of 90% (38 oC). The multilayer coating had 98% lower oxygen transmission rate compared to just PLA coated baseboard and heptane vapor transmission rate reduced by 99% in comparison to baseboard. Grease barrier for nanocellulose + PLA coatings increased 5-fold compared to nanocellulose alone and 2-fold compared to PLA alone. This approach of processing nanocellulose and PLA into multiple layers utilizing slot-die and extrusion coating in tandem has the potential to produce a barrier packaging paper that is both 100% bio-based and biodegradable.
- 22 November 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (3) , 035004
On the limit of superhydrophobicity: defining the minimum amount of TiO2 nanoparticle coating
Fabrication of superhydrophobic surfaces in large scale has been in high interest for several years, also titanium oxide nanostructures having been applied for the purpose. Optimizing the amount and structure of the TiO2 material in the coating will play a key role when considering upscaling. Here, we take a look at fabricating the superhydrophobic surface in a one-step roll-to-roll pilot scale process by depositing TiO2 nanoparticles from a Liquid Flame Spray onto a moving paperboard substrate. In order to find the minimum amount of nanomaterial still sufficient for creating superhydrophobicity, we varied nanoparticle production rate, flame distance from the substrate and line speed. Since the deposited amount of material sideways from the flame path was seen to decrease gradually, spatial analysis enabled us to consistently determine the minimum amount of TiO2 nanoparticles on the substrate needed to achieve superhydrophobicity. Amount as low as 20-30 mg/m2 of TiO2 nanoparticles was observed to be sufficient. The scanning electron microscopy revealed that at this amount, the surface was covered with nanoparticles only partially, but still sufficiently to create a hierarchical structure to affect wetting significantly. Based on XPS analysis, it became apparent that TiO2 gathers hydrocarbons on the surface to develop the surface chemistry towards hydrophobic, but below the critical amount of TiO2 nanoparticles, the chemistry could not enable superhydrophobicity anymore. While varying the deposited amount of TiO2, besides the local spatial variance of the coating amount, also the overall yield was studied. Within the text matrix, a yield up to 44 % was achieved. In conclusion, superhydrophobicity was achieved at all tested line speeds (50 to 300 m/min), even if the amount of TiO2 varied significantly (20 to 230 mg/m2).
- 22 November 2018
- Published by IOP Publishing in Materials Research Express
- Vol. 6 (3) , 035004
On the limit of superhydrophobicity: defining the minimum amount of TiO2 nanoparticle coating
Fabrication of superhydrophobic surfaces in large scale has been in high interest for several years, also titanium oxide nanostructures having been applied for the purpose. Optimizing the amount and structure of the TiO2 material in the coating will play a key role when considering upscaling. Here, we take a look at fabricating the superhydrophobic surface in a one-step roll-to-roll pilot scale process by depositing TiO2 nanoparticles from a Liquid Flame Spray onto a moving paperboard substrate. In order to find the minimum amount of nanomaterial still sufficient for creating superhydrophobicity, we varied nanoparticle production rate, flame distance from the substrate and line speed. Since the deposited amount of material sideways from the flame path was seen to decrease gradually, spatial analysis enabled us to consistently determine the minimum amount of TiO2 nanoparticles on the substrate needed to achieve superhydrophobicity. Amount as low as 20-30 mg/m2 of TiO2 nanoparticles was observed to be sufficient. The scanning electron microscopy revealed that at this amount, the surface was covered with nanoparticles only partially, but still sufficiently to create a hierarchical structure to affect wetting significantly. Based on XPS analysis, it became apparent that TiO2 gathers hydrocarbons on the surface to develop the surface chemistry towards hydrophobic, but below the critical amount of TiO2 nanoparticles, the chemistry could not enable superhydrophobicity anymore. While varying the deposited amount of TiO2, besides the local spatial variance of the coating amount, also the overall yield was studied. Within the text matrix, a yield up to 44 % was achieved. In conclusion, superhydrophobicity was achieved at all tested line speeds (50 to 300 m/min), even if the amount of TiO2 varied significantly (20 to 230 mg/m2).
- 14 August 2018
- Published by Wiley in Advanced Materials Interfaces
- Vol. 5 (20)
Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles
Surface engineering can be used to prevent ice accumulation and adhesion in environments that deal with icing problems. One recent engineering approach, slippery liquid infused porous surfaces (SLIPS), comprises a smooth and slippery lubricating surface, where lubricant is trapped within the pores of a solid material to repel various substances, such as water and ice. However, it remains unclear whether the slippery surfaces retain their icephobic characteristics under the impact of supercooled water droplets or repeated freezing and melting cycles. Here, the icephobic properties of SLIPS are evaluated under multiple droplet freeze–thaw and ice accretion–detachment cycles and compared to hydrophobic and superhydrophobic surfaces. The experiments are designed to mimic real environmental conditions, thus, the icephobicity is investigated in icing wind tunnel, where ice accretion occurs through the impact of supercooled water droplets. The adhesion of ice remained extremely low, <10 kPa, which is four times lower than ice adhesion onto smooth fluoropolymer surfaces, even after repeated ice accretion–detachment cycles. Moreover, cyclic droplet freeze–thaw experiments provide insight into the effects of temperature cycling on SLIPS wettability, showing stable wetting performance. The results suggest liquid infused porous surfaces as a potential solution to icephobicity under challenging and variating environmental conditions.
- 14 August 2018
- Published by Wiley in Advanced Materials Interfaces
- Vol. 5 (20)
Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles
Surface engineering can be used to prevent ice accumulation and adhesion in environments that deal with icing problems. One recent engineering approach, slippery liquid infused porous surfaces (SLIPS), comprises a smooth and slippery lubricating surface, where lubricant is trapped within the pores of a solid material to repel various substances, such as water and ice. However, it remains unclear whether the slippery surfaces retain their icephobic characteristics under the impact of supercooled water droplets or repeated freezing and melting cycles. Here, the icephobic properties of SLIPS are evaluated under multiple droplet freeze–thaw and ice accretion–detachment cycles and compared to hydrophobic and superhydrophobic surfaces. The experiments are designed to mimic real environmental conditions, thus, the icephobicity is investigated in icing wind tunnel, where ice accretion occurs through the impact of supercooled water droplets. The adhesion of ice remained extremely low, <10 kPa, which is four times lower than ice adhesion onto smooth fluoropolymer surfaces, even after repeated ice accretion–detachment cycles. Moreover, cyclic droplet freeze–thaw experiments provide insight into the effects of temperature cycling on SLIPS wettability, showing stable wetting performance. The results suggest liquid infused porous surfaces as a potential solution to icephobicity under challenging and variating environmental conditions.
- 1 February 2018
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 15 (3) , 623-632
Characteristics of nFOG, an aerosol-based wet thin film coating technique
- 1 February 2018
- Published by Springer Nature in Journal of Coatings Technology and Research
- Vol. 15 (3) , 623-632
Characteristics of nFOG, an aerosol-based wet thin film coating technique