Lingsheng Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lingsheng Yang has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Yajie Li
Zhongda Hospital, Southeast University, Nanjing, China
5 shared publications Tao Li
Jiangsu Key Laboratory of Meteorological Observation and Information Processing Nanjing University of Information Science and Technology Nanjing 210044 People's Republic of China
4 shared publicationsJiaru Zhang
School of Electronics & Information Engineering, Nanjing University of Information Science & Technology, Nanjing, China
3 shared publicationsBiyu Cheng
NUIST, Jiangsu Key Lab Meteorol Observat & Informat Proc, Ningliu Rd, Nanjing, Jiangsu, Peoples R China
2 shared publications- Dan Zhang
College of Information Science and Technology, Nanjing Forestry University, Nanjing, China
2 shared publications Jianping Fang
NUIST, Jiangsu Key Lab Meteorol Observat & Informat Proc, Ningliu Rd, Nanjing, Jiangsu, Peoples R China
2 shared publications
Latest Publications
- Open Access
- 24 June 2026
- Published by MDPI AG in Electronics
- Vol. 15 (13) , 2789
A Self-Decoupled Dual-Band MIMO Antenna for UAV Applications
To satisfy the demands of 5G communication and reliable data connectivity for unmanned aerial vehicles (UAVs), a novel two-element dual-band MIMO antenna with an inherent self-decoupling property based on orthogonal linear polarization diversity is proposed. Distinct from conventional designs relying on extra decoupling components, the antenna realizes isolation enhancement via coupled currents between annular strips and S-shaped strips without additional decoupling structures, representing the core design novelty. Fabricated on a low-cost 1.6 mm thick FR4 substrate, the antenna features compact overall dimensions of 60 mm × 30 mm × 1.6 mm, covering the 2.40–2.73 GHz ISM band and 3.38–3.63 GHz 5G Sub-6 GHz band. Measured results demonstrate that the reflection coefficient remains below −10 dB across the entire operating bands, with port isolation exceeding 27 dB for the 2.4 GHz band and 20 dB for the 3.5 GHz 5G band. The measured realized gain is 0.7–1.5 dB in the lower band and 2.3–2.9 dB in the upper band. The radiation efficiency, which is obtained exclusively from ANSYS HFSS 2025 R1 simulation, is higher than 90% for the lower band and over 80% for the upper band. The calculated envelope correlation coefficient (ECC) is less than 0.15 throughout the working bandwidth, which effectively suppresses inter-channel electromagnetic interference and mitigates channel fading caused by varying UAV attitudes to improve system channel capacity. Further verifications via epoxy encapsulation and co-simulation on an eight-rotor UAV platform prove slight frequency drift after packaging and installation, whereas its bandwidth and isolation still meet practical engineering requirements. Benefiting from a compact layout and omnidirectional radiation performance, the proposed low-cost MIMO antenna is convenient for conformal integration into a UAV fuselage, improving the practicability of UAV-aided emergency communication, equipment inspection and 5G network coverage.
- 24 June 2026
- Published by MDPI AG in Electronics
- Vol. 15 (13) , 2789
Open AccessA Self-Decoupled Dual-Band MIMO Antenna for UAV Applications
To satisfy the demands of 5G communication and reliable data connectivity for unmanned aerial vehicles (UAVs), a novel two-element dual-band MIMO antenna with an inherent self-decoupling property based on orthogonal linear polarization diversity is proposed. Distinct from conventional designs relying on extra decoupling components, the antenna realizes isolation enhancement via coupled currents between annular strips and S-shaped strips without additional decoupling structures, representing the core design novelty. Fabricated on a low-cost 1.6 mm thick FR4 substrate, the antenna features compact overall dimensions of 60 mm × 30 mm × 1.6 mm, covering the 2.40–2.73 GHz ISM band and 3.38–3.63 GHz 5G Sub-6 GHz band. Measured results demonstrate that the reflection coefficient remains below −10 dB across the entire operating bands, with port isolation exceeding 27 dB for the 2.4 GHz band and 20 dB for the 3.5 GHz 5G band. The measured realized gain is 0.7–1.5 dB in the lower band and 2.3–2.9 dB in the upper band. The radiation efficiency, which is obtained exclusively from ANSYS HFSS 2025 R1 simulation, is higher than 90% for the lower band and over 80% for the upper band. The calculated envelope correlation coefficient (ECC) is less than 0.15 throughout the working bandwidth, which effectively suppresses inter-channel electromagnetic interference and mitigates channel fading caused by varying UAV attitudes to improve system channel capacity. Further verifications via epoxy encapsulation and co-simulation on an eight-rotor UAV platform prove slight frequency drift after packaging and installation, whereas its bandwidth and isolation still meet practical engineering requirements. Benefiting from a compact layout and omnidirectional radiation performance, the proposed low-cost MIMO antenna is convenient for conformal integration into a UAV fuselage, improving the practicability of UAV-aided emergency communication, equipment inspection and 5G network coverage.
- 29 January 2026
- Published by Springer Nature in Wireless Personal Communications
- Vol. 146 (2) , 909-934
Design of a Lightweight Dual-Band Antenna for UAV Applications
- 29 January 2026
- Published by Springer Nature in Wireless Personal Communications
- Vol. 146 (2) , 909-934
Design of a Lightweight Dual-Band Antenna for UAV Applications
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (4) , 6302-6312
A Portable Conformal Antenna Sensor System for the Diagnosis of Sarcopenia
This article proposes a conformal antenna sensor system applicable to the detection of sarcopenia. The antenna unit employs a coplanar waveguide (CPW) feeding structure with the feeding network and radiation patch integrated on a single layer. The dielectric substrate utilizes 0.2-mm-thick FR4 material. The antenna achieves broadband performance in the 4–6-GHz range. It also maintains stable performance when conforming to the approximately cylindrical human upper arm, which has a radius ranging from 200 to 500 mm. We established a complete sarcopenia detection sensor system by integrating the conformal antenna with a portable network analyzer and tested it in a population of individuals aged 60 and above. The data were processed using a unique ultrawideband differential integration method. Subsequent modeling and analysis of the processed data using machine learning algorithms validated the reliability and accuracy of the system in diagnosing the presence or absence of sarcopenia.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (4) , 6302-6312
A Portable Conformal Antenna Sensor System for the Diagnosis of Sarcopenia
This article proposes a conformal antenna sensor system applicable to the detection of sarcopenia. The antenna unit employs a coplanar waveguide (CPW) feeding structure with the feeding network and radiation patch integrated on a single layer. The dielectric substrate utilizes 0.2-mm-thick FR4 material. The antenna achieves broadband performance in the 4–6-GHz range. It also maintains stable performance when conforming to the approximately cylindrical human upper arm, which has a radius ranging from 200 to 500 mm. We established a complete sarcopenia detection sensor system by integrating the conformal antenna with a portable network analyzer and tested it in a population of individuals aged 60 and above. The data were processed using a unique ultrawideband differential integration method. Subsequent modeling and analysis of the processed data using machine learning algorithms validated the reliability and accuracy of the system in diagnosing the presence or absence of sarcopenia.
- 1 July 2025
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 17 (4)
Research on PV power prediction model based on data dimensionality reduction and optimization of CEEMDAN-SSA-GRU algorithm
Photovoltaic (PV) power prediction faces challenges due to generation volatility. This study compares extreme learning machine, support vector machine, and gated recurrent unit (GRU) models, identifying GRU as the optimal base predictor for time-series data. We propose a hybrid CEEMDAN-SSA-GRU model, integrating complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) for signal decomposition, sparrow search algorithm (SSA) for GRU parameter optimization, and a hybrid algorithm combining Pearson correlation coefficient (PCC), Spearman correlation coefficient (SCC), and principal component analysis (PCA), hereafter abbreviated as PCC-SCC-PCA, for dimensionality reduction. Experimental results demonstrate the model's superior accuracy across sunny, cloudy, and rainy conditions, achieving the lowest root mean square error and highest R-square (R2) compared to GRU, SSA-GRU, and CEEMDAN-GRU variants. The PCC-SCC-PCA algorithm further enhances computational efficiency without compromising prediction performance. This framework provides a robust solution for grid-connected PV power forecasting.
- 1 July 2025
- Published by AIP Publishing in Journal of Renewable and Sustainable Energy
- Vol. 17 (4)
Research on PV power prediction model based on data dimensionality reduction and optimization of CEEMDAN-SSA-GRU algorithm
Photovoltaic (PV) power prediction faces challenges due to generation volatility. This study compares extreme learning machine, support vector machine, and gated recurrent unit (GRU) models, identifying GRU as the optimal base predictor for time-series data. We propose a hybrid CEEMDAN-SSA-GRU model, integrating complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) for signal decomposition, sparrow search algorithm (SSA) for GRU parameter optimization, and a hybrid algorithm combining Pearson correlation coefficient (PCC), Spearman correlation coefficient (SCC), and principal component analysis (PCA), hereafter abbreviated as PCC-SCC-PCA, for dimensionality reduction. Experimental results demonstrate the model's superior accuracy across sunny, cloudy, and rainy conditions, achieving the lowest root mean square error and highest R-square (R2) compared to GRU, SSA-GRU, and CEEMDAN-GRU variants. The PCC-SCC-PCA algorithm further enhances computational efficiency without compromising prediction performance. This framework provides a robust solution for grid-connected PV power forecasting.
- 13 February 2024
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 78 (3-4) , 143-157
Design of a dual-band wearable flexible MIMO antenna system for ISM band applications
This article proposes a dual-band (2.4/5.8 GHz) wearable MIMO antenna system that can be applied to the ISM band. The antenna element uses an improved coplanar waveguide feeding structure. The four-element antenna system achieves high isolation between antenna elements through the self-decoupling structure of the antenna element and the orthogonal placement. The use of a floating ground structure effectively suppresses back radiation. Through the combination of coplanar waveguide feeding and floating ground, the antenna not only has a low profile but also improves the front-to-back ratio of antenna radiation, reducing the SAR value. The antenna also uses felt as a flexible dielectric substrate and conductive cloth as a radiation element, making the antenna flexible.
- 13 February 2024
- Published by Walter de Gruyter GmbH in Frequenz
- Vol. 78 (3-4) , 143-157
Design of a dual-band wearable flexible MIMO antenna system for ISM band applications
This article proposes a dual-band (2.4/5.8 GHz) wearable MIMO antenna system that can be applied to the ISM band. The antenna element uses an improved coplanar waveguide feeding structure. The four-element antenna system achieves high isolation between antenna elements through the self-decoupling structure of the antenna element and the orthogonal placement. The use of a floating ground structure effectively suppresses back radiation. Through the combination of coplanar waveguide feeding and floating ground, the antenna not only has a low profile but also improves the front-to-back ratio of antenna radiation, reducing the SAR value. The antenna also uses felt as a flexible dielectric substrate and conductive cloth as a radiation element, making the antenna flexible.
- 5 February 2024
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 21 (11) , 2429-2440
Photovoltaic output power estimation model based on multi-meteorological variable dimension reduction and improved variational mode decomposition algorithm
- 5 February 2024
- Published by Taylor & Francis in International Journal of Green Energy
- Vol. 21 (11) , 2429-2440
Photovoltaic output power estimation model based on multi-meteorological variable dimension reduction and improved variational mode decomposition algorithm
- 22 September 2023
- Published by Zhejiang University Press in Frontiers of Information Technology & Electronic Engineering
- Vol. 24 (9) , 1357-1365
Pattern reconfigurable antenna array for 5.8 GHz WBAN applications
本文提出一种适用于5.8 GHz WBAN应用的方向图可重构
- 22 September 2023
- Published by Zhejiang University Press in Frontiers of Information Technology & Electronic Engineering
- Vol. 24 (9) , 1357-1365
Pattern reconfigurable antenna array for 5.8 GHz WBAN applications
本文提出一种适用于5.8 GHz WBAN应用的方向图可重构
- 1 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Chinese Journal of Electronics
- Vol. 32 (4) , 692-702
Dual-Band Flexible MIMO Antenna with Self-Isolation Enhancement Structure for Wearable Applications
A two-element dual-band flexible multiin multi-out antenna which can be used for wearable applications is proposed in this paper. The antenna consists of two radiating elements fed by coplanar waveguide, and a shielding layer, which are all made of flexible conductive cloth MKKTN260. Each radiating element is composed of two coupled split ring-shaped bending strips. The proposed antenna shows two measured impedance band-width ( $S$ 11 <-10 dB) of 2.39-2.48 GHz and 5.72-5.88 GHz, so that it can be used for 2.4 GHz and 5.8 GHz ISM (industrial scientific medical) applications. The two coupled split rings form a self-isolation enhancement structure and can realize polarization diversity at 2.4 GHz band and radiation shielding at 5.8 GHz band, respectively. High isolation (>30 dB) has been achieved for both the bands. Other characteristics for wearable applications like gain, efficiency, specific absorption rate, and bending performances were also studied.- 1 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Chinese Journal of Electronics
- Vol. 32 (4) , 692-702
Dual-Band Flexible MIMO Antenna with Self-Isolation Enhancement Structure for Wearable Applications
A two-element dual-band flexible multiin multi-out antenna which can be used for wearable applications is proposed in this paper. The antenna consists of two radiating elements fed by coplanar waveguide, and a shielding layer, which are all made of flexible conductive cloth MKKTN260. Each radiating element is composed of two coupled split ring-shaped bending strips. The proposed antenna shows two measured impedance band-width ( $S$ 11 <-10 dB) of 2.39-2.48 GHz and 5.72-5.88 GHz, so that it can be used for 2.4 GHz and 5.8 GHz ISM (industrial scientific medical) applications. The two coupled split rings form a self-isolation enhancement structure and can realize polarization diversity at 2.4 GHz band and radiation shielding at 5.8 GHz band, respectively. High isolation (>30 dB) has been achieved for both the bands. Other characteristics for wearable applications like gain, efficiency, specific absorption rate, and bending performances were also studied.- Open Access
- 30 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 64718-64724
Design of a 3D Top-Loaded Low-Profile Sleeve Antenna for UAV Applications
In this article, a 3D top-loaded low profile sleeve antenna for unmanned aerial vehicle (UAV) applications is proposed. By loading a 3D disc cone structure on the top of a sleeve antenna, the overall height of the antenna can be significantly reduced compared with the height of a traditional quarter-wavelength monopole antenna. In addition, adding shorted columns between the top plate of the disc cone and the ground can generate a new resonant point at lower frequency, so that the frequency bandwidth can be effectively extended. Finally, in order to further achieve the miniaturization of the antenna, an annular slot ring structure was etched on the upper surface of the top plate. Under the conditions of S11 <-10dB, the designed antenna with a total size of 160mm × 160mm × 26.6mm ( 0.44λ×0.44λ×0.07λ ) has a wide band covering from 840MHz to 1.69GHz (67.2%), while the height of the proposed antenna is only 0.07λ (where λ is the wavelength of the lowest frequency point). Moreover, omnidirectional radiation performances through the operating band can be achieved for both the measured and simulated results.
- 30 March 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 64718-64724
Open AccessDesign of a 3D Top-Loaded Low-Profile Sleeve Antenna for UAV Applications
In this article, a 3D top-loaded low profile sleeve antenna for unmanned aerial vehicle (UAV) applications is proposed. By loading a 3D disc cone structure on the top of a sleeve antenna, the overall height of the antenna can be significantly reduced compared with the height of a traditional quarter-wavelength monopole antenna. In addition, adding shorted columns between the top plate of the disc cone and the ground can generate a new resonant point at lower frequency, so that the frequency bandwidth can be effectively extended. Finally, in order to further achieve the miniaturization of the antenna, an annular slot ring structure was etched on the upper surface of the top plate. Under the conditions of S11 <-10dB, the designed antenna with a total size of 160mm × 160mm × 26.6mm ( 0.44λ×0.44λ×0.07λ ) has a wide band covering from 840MHz to 1.69GHz (67.2%), while the height of the proposed antenna is only 0.07λ (where λ is the wavelength of the lowest frequency point). Moreover, omnidirectional radiation performances through the operating band can be achieved for both the measured and simulated results.
- Open Access
- 25 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 767-774
Design of a Super Wide Band Antenna and Measure of Ambient RF Density in Urban Area
A compact Super Wide band (SWB) antenna fed by coplanar waveguide (CPW) is proposed in this paper. The size of the antenna is 140×100mm2 (0.16λ × 0.12λ). The antenna originates from 3D volcano smoke antenna, and consists of a prolonged radiation patch and a symmetrical ground. Both the patch and ground were designed as smoothing structure, which can improve the impedance matching through a wide band. The simulated and measured bandwidth show that the antenna has a well-matched impedance bandwidth from 400MHz to higher than 20GHz under VSWR=2 criterion, and the bandwidth ratio is greater than 50:1. The gain, efficiency and radiation pattern were all measured, and the maximum gain and efficiency are 6.3dBi and 96%, respectively. The antenna was also used to measure the ambient radiation frequency (RF) density in an urban area of Nanjing in China, which on the other hand proves the efficiency of this design.
- 25 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 767-774
Open AccessDesign of a Super Wide Band Antenna and Measure of Ambient RF Density in Urban Area
A compact Super Wide band (SWB) antenna fed by coplanar waveguide (CPW) is proposed in this paper. The size of the antenna is 140×100mm2 (0.16λ × 0.12λ). The antenna originates from 3D volcano smoke antenna, and consists of a prolonged radiation patch and a symmetrical ground. Both the patch and ground were designed as smoothing structure, which can improve the impedance matching through a wide band. The simulated and measured bandwidth show that the antenna has a well-matched impedance bandwidth from 400MHz to higher than 20GHz under VSWR=2 criterion, and the bandwidth ratio is greater than 50:1. The gain, efficiency and radiation pattern were all measured, and the maximum gain and efficiency are 6.3dBi and 96%, respectively. The antenna was also used to measure the ambient radiation frequency (RF) density in an urban area of Nanjing in China, which on the other hand proves the efficiency of this design.