Hasan Mehrjerdi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Hasan Mehrjerdi has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Maarouf Saad
École de Technologie Supérieure
7 shared publications Reza Hemmati
Kermanshah University of Technology
6 shared publications- Atif Iqbal
Department of Electrical Engineering, Qatar University, Doha, Qatar
5 shared publications - Reza Hemmati
Department of Electrical Engineering Kermanshah University of Technology Kermanshah Iran
5 shared publications - Elyas Rakhshani
Hybrid Energy Storage Solutions Ltd. (HESStec),Control and Modeling Group,Technology Department,Valencia,Spain
4 shared publications - Majid Sanaye-Pasand
University of Tehran
4 shared publications
Latest Publications
- 7 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 71 (3) , 7947-7958
An Extendable High Step-Up Quadratic Boost Topology Having Low Voltage Stress on MOSFETs
A generalized quadratic boost converter topology has been proposed in the paper which offers large voltage gain with less voltage stresses at the switches. The proposed converter includes a basic unit cell having capacitors and diodes. By repeating the sequence of these units, the desired gain in voltage of the cascaded diode-capacitor-based quadratic boost converter (CDCQBC) is ensured with less voltage stress appearing at the switches. The converter’s cost becomes lower because the required switches is having lesser voltage rating. The available voltage gain of the converter makes CDCQBC a viable option to boost the voltage of renewable energy-based sources like solar photovoltaic (PV) sources, fuel cells, etc. The performance of this converter in continuous mode od conduction has been analyzed. Further, the effect of nonidealities of the elements included in CBHIC on efficiency and the voltage gain of this converter has been studied. The assessment of the proposed CDCQBC is done with various state-of-the-art quadratic boost converters reported in the literature and the main features of this converter are enlightened. To validate the findings, a lab prototype of the proposed converter having a power rating of 400 W has been developed and the experimental analysis are include
- 7 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Consumer Electronics
- Vol. 71 (3) , 7947-7958
An Extendable High Step-Up Quadratic Boost Topology Having Low Voltage Stress on MOSFETs
A generalized quadratic boost converter topology has been proposed in the paper which offers large voltage gain with less voltage stresses at the switches. The proposed converter includes a basic unit cell having capacitors and diodes. By repeating the sequence of these units, the desired gain in voltage of the cascaded diode-capacitor-based quadratic boost converter (CDCQBC) is ensured with less voltage stress appearing at the switches. The converter’s cost becomes lower because the required switches is having lesser voltage rating. The available voltage gain of the converter makes CDCQBC a viable option to boost the voltage of renewable energy-based sources like solar photovoltaic (PV) sources, fuel cells, etc. The performance of this converter in continuous mode od conduction has been analyzed. Further, the effect of nonidealities of the elements included in CBHIC on efficiency and the voltage gain of this converter has been studied. The assessment of the proposed CDCQBC is done with various state-of-the-art quadratic boost converters reported in the literature and the main features of this converter are enlightened. To validate the findings, a lab prototype of the proposed converter having a power rating of 400 W has been developed and the experimental analysis are include
- 4 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (2) , 1891-1904
A New Quadratic High Step-Up DC–DC Converter Based on Coupled Inductors for Renewable Energy Applications
This paper presents a high-step-up DC-DC topology. This circuit configuration yields a quadratic output voltage while maintaining low voltage stress on power MOSFETs. The configuration features a common ground connection among the input and output ports, with the sources of the switches directly linked to the ground. It has two switches, three diodes, four capacitors, and two coupled inductors. The first coupled inductor has three windings to increase voltage gain and limit input current ripple. The second one has two windings to increase voltage gain. Steady-state analysis is conducted to determine output voltage and voltage stress across power MOSFETs. The suggested topology’s key feature is its soft input current ripple, which is achieved using a coupled inductor configuration. A comparison section highlights its features compared to the state-of-the-art topologies reported in this paper. In addition, graphical voltage gain and voltage stress of power MOSFETs compared with other structures are added. The final step includes the development of a laboratory prototype, which operates under duty cycle variations of 0.3-0.6 for a wide input voltage range of 18-48 V. The prototype is tested for a maximum output power of 400W and a switching frequency of 50 kHz.
- 4 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (2) , 1891-1904
A New Quadratic High Step-Up DC–DC Converter Based on Coupled Inductors for Renewable Energy Applications
This paper presents a high-step-up DC-DC topology. This circuit configuration yields a quadratic output voltage while maintaining low voltage stress on power MOSFETs. The configuration features a common ground connection among the input and output ports, with the sources of the switches directly linked to the ground. It has two switches, three diodes, four capacitors, and two coupled inductors. The first coupled inductor has three windings to increase voltage gain and limit input current ripple. The second one has two windings to increase voltage gain. Steady-state analysis is conducted to determine output voltage and voltage stress across power MOSFETs. The suggested topology’s key feature is its soft input current ripple, which is achieved using a coupled inductor configuration. A comparison section highlights its features compared to the state-of-the-art topologies reported in this paper. In addition, graphical voltage gain and voltage stress of power MOSFETs compared with other structures are added. The final step includes the development of a laboratory prototype, which operates under duty cycle variations of 0.3-0.6 for a wide input voltage range of 18-48 V. The prototype is tested for a maximum output power of 400W and a switching frequency of 50 kHz.
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. PP (19328184) , 1-11
Robust Strategic Behavior of a Large Multi-Energy Consumer in Electricity Market Considering Integrated Demand Response
Integrated demand response (IDR) is a cost-effective approach to promoting renewable energy consumption and energy saving in multi-energy systems. The efficient use of the flexibility of demand-side energy sources as well as the elasticity of energy demands increases the tendency for the development of IDR. This article proposes a bilevel optimization framework that allows a large multi-energy consumer (LMEC) equipped with self-provided energy resources to manipulate electricity market prices using optimum execution of the IDR to fulfill electricity, heating, and cooling needs, simultaneously. At the upper level, the LMEC operator seeks to minimize energy procurement costs associated with electricity, heating, and cooling, whereas at the lower level, the aim is to maximize social welfare from the market operator's perspective in order to establish the market-clearing price. The Karush–Kuhn–Tucker (KKT) conditions and strong duality theory are utilized to convert the model into a single-level mixed-integer linear programming framework. In addition, a developed information gap decision theory technique is adopted to cope with the uncertainty of power generation from wind turbines owned by the LMEC operator under a risk-averse scheme. The numerical findings demonstrate the potential of IDR in influencing power market prices to the benefit of LMEC and lowering its energy procurement costs.
- 28 August 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Systems Journal
- Vol. PP (19328184) , 1-11
Robust Strategic Behavior of a Large Multi-Energy Consumer in Electricity Market Considering Integrated Demand Response
Integrated demand response (IDR) is a cost-effective approach to promoting renewable energy consumption and energy saving in multi-energy systems. The efficient use of the flexibility of demand-side energy sources as well as the elasticity of energy demands increases the tendency for the development of IDR. This article proposes a bilevel optimization framework that allows a large multi-energy consumer (LMEC) equipped with self-provided energy resources to manipulate electricity market prices using optimum execution of the IDR to fulfill electricity, heating, and cooling needs, simultaneously. At the upper level, the LMEC operator seeks to minimize energy procurement costs associated with electricity, heating, and cooling, whereas at the lower level, the aim is to maximize social welfare from the market operator's perspective in order to establish the market-clearing price. The Karush–Kuhn–Tucker (KKT) conditions and strong duality theory are utilized to convert the model into a single-level mixed-integer linear programming framework. In addition, a developed information gap decision theory technique is adopted to cope with the uncertainty of power generation from wind turbines owned by the LMEC operator under a risk-averse scheme. The numerical findings demonstrate the potential of IDR in influencing power market prices to the benefit of LMEC and lowering its energy procurement costs.
- 6 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 14 (3) , 1411-1424
Multi-Stage Proactive Scheduling of Strategic DISCOs in Mutual Interaction With Cloud Energy Storage and Deferrable Loads
Unexpected events have underscored the need for proactive preparedness in local energy systems, especially strategic distribution companies (DISCOs). The state-of-the-art methods to take proactive approaches in DISCOs are to use battery energy storage systems (BESS). However, there is a lack of established approaches that include the inter-dependencies of techno-socio economic features. To overcome this limitation, this paper constitutes a multi-stage resilience-promoting proactive strategy with linear decisions to enhance the strategic DISCOs preparedness level to deal with unscheduled islanding operation under uncertainties. In particular, this strategy provides operational solutions to survive DISCOs under stressful conditions by incorporating the economic operation of cloud energy storage (CES), which manages many BESS, and correlated demand response (DR) programs in resiliency issues. To this end, the lexicography algorithm is employed to prioritize different objectives based on the pre-avoidance, avoidance, survival, and post-disaster stages, which captures the BESS' energy level as well as socio-economic features of DISCO and CES. The effectiveness of the proposed strategy is demonstrated both analytically and empirically. At first, the features of the proposed strategy are examined in responding to islanding state using a set of numerical studies conducted on the IEEE 69-bus test system in GAMS software. After that, insightful analyses are performed via DIgSILENT PowerFactory to verify the feasibility of the proposed strategy.
- 6 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 14 (3) , 1411-1424
Multi-Stage Proactive Scheduling of Strategic DISCOs in Mutual Interaction With Cloud Energy Storage and Deferrable Loads
Unexpected events have underscored the need for proactive preparedness in local energy systems, especially strategic distribution companies (DISCOs). The state-of-the-art methods to take proactive approaches in DISCOs are to use battery energy storage systems (BESS). However, there is a lack of established approaches that include the inter-dependencies of techno-socio economic features. To overcome this limitation, this paper constitutes a multi-stage resilience-promoting proactive strategy with linear decisions to enhance the strategic DISCOs preparedness level to deal with unscheduled islanding operation under uncertainties. In particular, this strategy provides operational solutions to survive DISCOs under stressful conditions by incorporating the economic operation of cloud energy storage (CES), which manages many BESS, and correlated demand response (DR) programs in resiliency issues. To this end, the lexicography algorithm is employed to prioritize different objectives based on the pre-avoidance, avoidance, survival, and post-disaster stages, which captures the BESS' energy level as well as socio-economic features of DISCO and CES. The effectiveness of the proposed strategy is demonstrated both analytically and empirically. At first, the features of the proposed strategy are examined in responding to islanding state using a set of numerical studies conducted on the IEEE 69-bus test system in GAMS software. After that, insightful analyses are performed via DIgSILENT PowerFactory to verify the feasibility of the proposed strategy.
- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 38 (2) , 1316-1328
On the Roles and Interactions of the MMC Internal Energy Balancing Degrees of Freedom for Three-Wire Three-Phase Connections
This paper proposes a comprehensive analysis of the Modular Multilevel Converter (MMC) focusing on the different arm applied voltage components, that this paper will refer as degrees of freedom (DOFs), which must be considered in order to perform the internal energy balancing of the converter. The analysis relies on the commonly used differential and additive reference frames. By means of a steady-state analysis, the different voltages components applied and currents components flowing through the converter are studied and an in-depth discussion of the roles of each DOF in the converter is presented. Furthermore, the mathematical expressions of the power exchanged between the AC/DC networks and within the converter, between the arms (vertical) and among phase-legs (horizontal), are derived considering all the DOFs of the MMC, revealing potential interactions among the differential and additive quantities. Finally, the theoretical analysis is validated through comparisons between the values obtained with the mathematical expressions and the simulation results assuming different case scenarios.
- 10 October 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Delivery
- Vol. 38 (2) , 1316-1328
On the Roles and Interactions of the MMC Internal Energy Balancing Degrees of Freedom for Three-Wire Three-Phase Connections
This paper proposes a comprehensive analysis of the Modular Multilevel Converter (MMC) focusing on the different arm applied voltage components, that this paper will refer as degrees of freedom (DOFs), which must be considered in order to perform the internal energy balancing of the converter. The analysis relies on the commonly used differential and additive reference frames. By means of a steady-state analysis, the different voltages components applied and currents components flowing through the converter are studied and an in-depth discussion of the roles of each DOF in the converter is presented. Furthermore, the mathematical expressions of the power exchanged between the AC/DC networks and within the converter, between the arms (vertical) and among phase-legs (horizontal), are derived considering all the DOFs of the MMC, revealing potential interactions among the differential and additive quantities. Finally, the theoretical analysis is validated through comparisons between the values obtained with the mathematical expressions and the simulation results assuming different case scenarios.
- 11 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 13 (4) , 2226-2238
Mobile Battery Storage Modeling and Normal-Emergency Operation in Coupled Distribution-Transportation Networks
Previous research has proved that Mobile Battery Energy Storage (MBES) can play a pivotal role in achieving resiliency goals in distribution networks besides sustainability purposes. The missing links in the practical deployment of this new flexibility resource are the discontinuity between normal and emergency operating states in addition to the high computational burden. Accordingly, a new rolling-horizon operation model for a fleet of truck-mounted mobile batteries (TMMBs) employed in a joint transportation-distribution network is proposed. The model can effectively handle and switch between normal and emergency states by integrating a new schedule memory concept into the upcoming horizons. The spatial and temporal dynamics of the TMMBs, along with the transportation time and cost constraints, are modeled by a novel linear and computationally affordable formulation. The model runtime is further targeted by proposing a two-stage optimization model to detach transportation network calculations from the distribution grid. Additionally, a lexicographic multi-objective paradigm is used to ensure a maximum resiliency plan at the minimum expenses during emergencies. The model considers outage and congestion change of the road traffic beyond the forecasted values besides network uncertainties. Implementing the model on a test case proves its functionality in dealing with diverse network situations.
- 11 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Sustainable Energy
- Vol. 13 (4) , 2226-2238
Mobile Battery Storage Modeling and Normal-Emergency Operation in Coupled Distribution-Transportation Networks
Previous research has proved that Mobile Battery Energy Storage (MBES) can play a pivotal role in achieving resiliency goals in distribution networks besides sustainability purposes. The missing links in the practical deployment of this new flexibility resource are the discontinuity between normal and emergency operating states in addition to the high computational burden. Accordingly, a new rolling-horizon operation model for a fleet of truck-mounted mobile batteries (TMMBs) employed in a joint transportation-distribution network is proposed. The model can effectively handle and switch between normal and emergency states by integrating a new schedule memory concept into the upcoming horizons. The spatial and temporal dynamics of the TMMBs, along with the transportation time and cost constraints, are modeled by a novel linear and computationally affordable formulation. The model runtime is further targeted by proposing a two-stage optimization model to detach transportation network calculations from the distribution grid. Additionally, a lexicographic multi-objective paradigm is used to ensure a maximum resiliency plan at the minimum expenses during emergencies. The model considers outage and congestion change of the road traffic beyond the forecasted values besides network uncertainties. Implementing the model on a test case proves its functionality in dealing with diverse network situations.
- Open Access
- 19 June 2022
- Published by Wiley in Wires Energy and Environment
- Vol. 12 (1)
Modeling and analysis approaches for small‐signal stability assessment of power‐electronic‐dominated systems
The stability, operation, and control of power networks have been challenged due to the increased penetration of power electronic converters. New instability phenomena have appeared due to the interaction of the power converter controllers with other power network elements, including other power converters. Small‐signal tools have been proved effective to identify and mitigate stability issues but their development is still ongoing. This article presents the state of the art on small‐signal modeling and stability assessment of converter‐dominated networks. The modeling of converters and other power system components is reviewed, as well as the most common small‐signal analysis techniques employed in conventional and modern power systems with power electronics. Two case studies are introduced to exemplify the modeling and stability analysis, employing some of the techniques presented in the article.This article is categorized under: Energy and Power Systems > Distributed Generation
- 19 June 2022
- Published by Wiley in Wires Energy and Environment
- Vol. 12 (1)
Open AccessModeling and analysis approaches for small‐signal stability assessment of power‐electronic‐dominated systems
The stability, operation, and control of power networks have been challenged due to the increased penetration of power electronic converters. New instability phenomena have appeared due to the interaction of the power converter controllers with other power network elements, including other power converters. Small‐signal tools have been proved effective to identify and mitigate stability issues but their development is still ongoing. This article presents the state of the art on small‐signal modeling and stability assessment of converter‐dominated networks. The modeling of converters and other power system components is reviewed, as well as the most common small‐signal analysis techniques employed in conventional and modern power systems with power electronics. Two case studies are introduced to exemplify the modeling and stability analysis, employing some of the techniques presented in the article.This article is categorized under: Energy and Power Systems > Distributed Generation
- 2 May 2022
- Published by Wiley in International Journal of Energy Research
- Vol. 46 (9) , 12323-12340
Techno‐economic‐environmental modeling, joint optimization, and sensitivity analysis of a combined water desalination‐hybrid renewable supply system
- 2 May 2022
- Published by Wiley in International Journal of Energy Research
- Vol. 46 (9) , 12323-12340
Techno‐economic‐environmental modeling, joint optimization, and sensitivity analysis of a combined water desalination‐hybrid renewable supply system
- Open Access
- 22 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 158599-158615
Advances in Transmission Network Fault Location in Modern Power Systems: Review, Outlook and Future Works
Faults in the power system need appropriate maintenance actions at the fault point to fix the problem immediately. A high percentage of the short circuit faults in power systems occur on the transmission system where the lines pass through different harsh climates and experience outdoor environmental conditions. The repairing procedure of the faulty line requires determining the accurate fault location. Fast and accurate fault location of transmission networks play an important role in modern power systems to improve the system reliability and stability. A fault locator is an apparatus that determines the location of the fault in the transmission system by acquiring the proper measured quantities, i.e. the voltages and currents at the lines terminals. As such, the utilities can repair and fix the problem rapidly after determining the location of the fault using the analytical and numerical methods provided in fault locators. This research explores various fault location techniques of transmission networks in detail as a vital requirement for operating the modern power system more secure and reliable. In this survey, different new methods of fault location such as i) distance relay algorithm, ii) traveling wave, iii) artificial intelligence, iv) wide-area, v) time reversal theory, vi) differential equations, and vii) impedance calculation methods are reviewed and investigated to illustrate their pros and cons inaccurate fault location for complex modern power networks. In addition, these methods are assessed to compare their requirements, abilities and shortcomings. Moreover, using the provided extensive analysis in the paper, and based on the useful experiences of the authors, some beneficial topics and suggestions are proposed for future works and improved algorithms in the field of fault location.
- 22 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 158599-158615
Open AccessAdvances in Transmission Network Fault Location in Modern Power Systems: Review, Outlook and Future Works
Faults in the power system need appropriate maintenance actions at the fault point to fix the problem immediately. A high percentage of the short circuit faults in power systems occur on the transmission system where the lines pass through different harsh climates and experience outdoor environmental conditions. The repairing procedure of the faulty line requires determining the accurate fault location. Fast and accurate fault location of transmission networks play an important role in modern power systems to improve the system reliability and stability. A fault locator is an apparatus that determines the location of the fault in the transmission system by acquiring the proper measured quantities, i.e. the voltages and currents at the lines terminals. As such, the utilities can repair and fix the problem rapidly after determining the location of the fault using the analytical and numerical methods provided in fault locators. This research explores various fault location techniques of transmission networks in detail as a vital requirement for operating the modern power system more secure and reliable. In this survey, different new methods of fault location such as i) distance relay algorithm, ii) traveling wave, iii) artificial intelligence, iv) wide-area, v) time reversal theory, vi) differential equations, and vii) impedance calculation methods are reviewed and investigated to illustrate their pros and cons inaccurate fault location for complex modern power networks. In addition, these methods are assessed to compare their requirements, abilities and shortcomings. Moreover, using the provided extensive analysis in the paper, and based on the useful experiences of the authors, some beneficial topics and suggestions are proposed for future works and improved algorithms in the field of fault location.