ESElhadi Sariali

Elhadi Sariali

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Elhadi Sariali has a total of 174 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • HIGHER SEVEN-YEAR FOLLOW-UP SURVIVAL RATE AFTER CT-SCAN 3D-PLANNED UNCEMENTED TOTAL HIP ARTHROPLASTY USING AN ANATOMIC STEM COMPARED WITH A STRAIGHT QUADRANGULAR STEM: A PROSPECTIVE COHORT STUDY OF 873 PATIENTS

    by Elhadi Sariali, Sena Boukhelifa

    Introduction: Anatomical femoral stems featuring double sagittal curvature and helitorsion have been shown to restore femoral anteversion more accurately than straight stems. However, comparative data on their medium-term survival remain limited. This study aimed to compare the medium-term failure rates of an anatomic stem with those of a conventional double-tapered straight stem. We hypothesised that improved adaptation to the proximal femur and restoration of femoral anteversion with an anatomic stem would promote more physiological bone remodelling and enhance implant survival. Methods: We analyzed prospectively collected data from 756 patients (893 hips; 370 women, 386 men; mean age 62 years, range 16–94) who underwent total hip arthroplasty via a direct anterior approach between 2005 and 2022. The mean follow-up was seven years (SD 3; range 2–19). Three stem designs were used: a short, uncemented anatomic stem (n = 498), a generic double-tapered straight stem (n = 252), and a custom patient-specific anatomic stem (n = 143). All procedures were planned preoperatively using three-dimensional (3D) templating. Custom stems were designed from CT-based reconstructions when accurate 3D anatomical reproduction was not achievable. Kaplan–Meier survival analysis and multivariate Cox regression (adjusted for sex, age, BMI, and ASA grade) were used to estimate implant survival and hazard ratios (HRs) for revision due to mechanical failure. Results: At seven years, survival was 95.8% (95% CI 93.0–98.5) for straight stems, 99.0% (95% CI 98.1–99.9) for anatomic stems, and 100% for custom stems. Straight stems showed a higher revision risk than anatomic stems (adjusted HR 4.13; 95% CI 1.78–9.57; p = 0.03), particularly in Dorr A femurs. Conclusion: Anatomic stems demonstrated superior medium-term survival compared with straight stems, especially in Dorr A femurs. Custom anatomic stems achieved the best outcomes, even in complex proximal femoral anatomy.

  • Open Access

    Medullary radius as a major contributor to variance in the proximal femur: Insights from statistical shape modeling

    by Stefan Bracher, Benjamin Haas, Elhadi Sariali, Philippe Zysset

    Proximal femoral medullary canal morphology is a key determinant of cementless stem fit, primary stability, and load transfer in total hip arthroplasty (THA), yet population‐level three‐dimensional characterization remains limited. This study was designed to quantify variability in canal geometry and to capture dominant anatomical modes of variation with statistical shape modeling (SSM). Computed tomography data from 763 candidates for primary THA (389 female, 374 male; 20–92 years) were analyzed. Endosteal contours of the proximal canal were processed to build a point‐correspondent SSM by principal component analysis (PCA). Five geometric features were evaluated per specimen: equivalent radius (normalized), roundness, major‐axis angle (torsion), flare index, and curvature. Substantial inter‐individual variability was observed across all features, with differences by sex and age. The first three principal components accounted for 68.4% of total variance, and each showed interpretable associations with at least one geometric feature. Model behavior was examined by synthetic sampling within ±2 SD (specificity) and by 10‐fold cross‐validation (generalization), indicating faithful reconstruction of real shapes and stable performance on held‐out data. These findings provide a compact description of proximal canal shape variation and its key geometric drivers. The resulting population map is expected to support implant selection and sizing in preoperative planning, inform shape‐based classification, and guide design envelopes for standard and personalized stems, with potential efficiencies in manufacturing and material use.


  • Unlike Acetabular Anteversion, Femoral Anteversion Is Not Associated with the Hip Coronal Morphotype

    by Elhadi Sariali, Sena Boukhelifa

    Background: Most femoral stem designs used in total hip arthroplasty (THA) take into account the proximal femoral morphotype in terms of lateralization and neck-shaft angle (NSA) but not version. The objective of this study was to analyze the acetabular anteversion and femoral anteversion (FA) values in a large cohort according to the 3-dimensional (3D) morphotype of the proximal femur. Our hypothesis was that FA is an anatomic parameter independent of the coronal morphotype (varus, neutral, valgus). Methods: A retrospective study based on prospectively collected data included all patients who underwent, from January 2009 to December 2021, a THA planned on the basis of a low-dose computed tomographic (CT) scan 3D. The anatomic acetabular anteversion was calculated in the anterior pelvic plane. The 3D volume models were used to measure the NSA and the FA. We used a multivariable linear regression model to assess the relationship between the NSA and the other hip parameters. Results: The study included 849 consecutive patients (430 women and 419 men), with a mean age of 62 ± 15 years and a mean body mass index of 26.8 ± 5.7 kg/m2. The etiology was primary osteoarthritis in 616 patients, osteonecrosis in 141 patients, and dysplasia in 92 patients. The mean NSA was 129° ± 7°. The femoral morphotype was vara in 112 cases and valga in 105 cases. Acetabular anteversion was significantly lower in the vara group (mean, 21° ± 9°) and higher in the valga group (mean, 26° ± 9°) compared with the neutral group (mean, 24° ± 8°) (p < 0.001). The FA did not vary significantly according to the femoral morphotype (mean, 20° ± 12°; p = 0.3), with no significant association found between the NSA and FA (β = −0.004 [95% confidence interval, −0.5 to 0.05]; p = 0.8). Conclusions: The FA was not associated with the NSA. A hip morphotype classification combining the NSA and FA is presented for use in guiding preoperative planning in THA. Customized patient-specific stems may be of interest in some morphotypes to accurately restore the hip anatomy. Level of Evidence: Prognostic Level IV. See Instructions for Authors for a complete description of levels of evidence.


  • Higher femoral anteversion restoration accuracy after total hip arthroplasty with a proximally fixed anatomic stem than with a generic straight double-tapered stem

    by Elhadi Sariali, Hugues Pascal Moussellard

    Background: Femoral antetorsion in uncemented hip replacement hardly can be modified and the restoration of the anatomic anteversion might be difficult with standard stems. We compared femoral anteversion restoration of a generic straight stem with a proximally fixed anatomic stem that included a dual sagittal curvature and a proximal torsion. It was hypothesised that the restoration of the anteversion was more accurate with the anatomic stem. Patients and methods: In this comparative study data were collected prospectively of 80 consecutive patients with total hip arthroplasty for primary osteoarthritis. In the first 40 patients (Group I) a cementless proximally fixed anatomic stem with 15° antetorsion of the shaft and a dual sagittal curvature was used. Its design was based on a database of 3D CT images of 600 hips. For comparison a cementless generic straight double-tapered stem was implanted in the next 40 patients (Group II). All operations were performed by one experienced surgeon. All patients had a preoperative 3D planning. A low-dose CT scan was performed at 3 months postoperatively to determine the postoperative stem anteversion. Results: The demographics were similar in both groups. In group I the mean postoperative femoral anteversion was similar to the preoperative one (22.1° ± 10.2° vs. 20.4° ± 9°; p = 0.2). In Group II, the mean postoperative femoral anteversion was lower (12.9° ± 10.8°, vs. 18.3° ± 12°; p = 0.02). Conclusions: Uncemented standard femoral stems tend to reduce femoral anteversion. The used anatomic stem restored femoral anteversion better. The clinical impact of this finding has to be proven.


  • A higher reliability with a computed tomography scan-based three dimensional technique than with a two dimensional measurement for lower limb discrepancy in total hip arthroplasty planning

    by Elhadi Sariali, Matthias Mueller, Shahnaz Klouche

    Purpose The goal was to compare the reliability of a novel 3D method with the standard 2D technique for lower limb discrepancy (LLD) measurement during pre-operative THA planning. Methods This prospective study included 100 consecutive patients who underwent THA using 3D planning based on a low-dose CT scan. The LLD was subdivided into three parameters: the intra-articular LLD (IA-LLD), the segmental extra-articular LLD (EA-LLD), and the total LLD (T-LLD). The LLD was assessed with a standard 2D technique on CT scanograms and also with a 3D method. A pelvic reference line (PBL) was determined as the 3D line joining the deepest part of the two great sciatic notches. The IA length was measured from the lesser trochanters (MLT) to the PBL. The EA length was measured from the MLT to the ankle center, and the total length was measured from the ankle center to the PBL. The intra- and inter-observer reliability of the measurements was assessed with the intra-class correlation coefficient (ICC). Results The intra-observer ICC was higher with the 3D technique for IA-LLD (0.96–0.97 vs. 0.79–0.84), EA-LLD (0.96 vs. 0.78–0.92), and T-LLD (0.99 vs. 0.90–0.97). Inter-observer ICC was also higher with the 3D technique for IA-LLD (0.90–0.94 vs. 0.70–0.84) and EA-LLD (0.93–0.96 vs. 0.80–0.82), but not for T-LLD (0.91–0.94 vs. 0.91–0.94). Conclusion The presented 3D method has a higher reliability than 2D assessment of LLD during pre-operative THA planning. This article presents the first discussion of measuring LLD from 3D models. As 3D reconstruction becomes both more feasible and less-invasive, this study has interest to the orthopaedic surgeon.


  • Pre-operative bone mineral density is a predictive factor for excellent early patient-reported outcome measures in cementless total hip arthroplasty using a proximally fixed anatomic stem. A prospective study at two year minimum follow-up

    by Elhadi Sariali, Nicolas Gaujac, Quentin Grimal, Shahnaz Klouche

    Purpose The goal of the study was to analyze the impact of the pre-operative bone mineral density on the patients’ reported outcomes at two year minimum follow-up of cementless THA using a proximally fixed anatomic stem. Methods A prospective study included all patients who underwent a cementless THA using a specific proximally fixed anatomic stem and a 3D preoperative CT scan-based planning. The bone mineral density (BMD) of the metaphyseal cancellous bone was computed in a volume (of 1 mm thick and of 1 cm2 surface) at the level of the calcar 10 mm above the top of the lesser trochanter. Patients were assessed at two year follow-up using self-administered auto-questionnaires corresponding to the modified Harris (mHHS), the Oxford (OHS), and the Forgotten Hip (FHS) scores. A multiple linear regression statistical analysis was performed to assess the link between the mHHS, the age, body mass index (BMI), BMD, gender, and ASA grade. Results Fifty patients were included (29 men, 21 women), with an average age of 62 ± 12 years and an average BMI of 27 ± 5 kg/m2. At two year follow-up, on multivariate analysis, excellent mHHS (≥ 90%) was significantly associated with only two parameters: a BMI ≤ 25 kg /m2 with an odd ratio OR = 10 (CI95% [2.1–48.3], p = 0.004) and a BMD ≥ 72 mg/cm3 with an odd ratio OR = 4.87 (CI95% [1.2–18.6], p = 0.02). Conclusion The short-term PROMs after cementless THA are impacted by pre-operative cancellous bone density. However, the BMI remains the most influential parameter on the clinical outcomes.