David Gonzalez
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David Gonzalez has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Josep Balcells
Terrassa Industrial Electronics Group, Technical University of Catalonia, Terrassa, Spain
33 shared publications - Javier Gago
Departament d'Enginyeria Electrònica, Universitat Politècnica de Catalunya
27 shared publications - Juan Mon
Department of Electronic Engineering, Terrassa Industrial Electronics Group, Universitat Politcnica de Catalunya (UPC), Terrassa, Spain
12 shared publications - Manuel Lamich
Technical University of Catalonia (Terrassa, Spain)
11 shared publications A. Santolaria
Unversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica, Campus de Terrassa, Colon, 1. 08222 Terrassa, SPAIN
5 shared publications- Ignacio Gil
Department of Electronic Engineering, Universitat Politecnica de Catalunya, 08222 Barcelona, Spain
5 shared publications
Latest Publications
- 1 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Coupled Interleaved Multicellular Parallel converters operated under switching frequency modulation
The Coupled Interleaved Multicellular Parallel (CIMP) topology is the subject of intense research because of its advantages in terms of systems integration, power density increase, low level of EMI emissions and dynamic performance. This paper evaluates the viability of application of switching frequency modulation techniques to CIMP topology.
- 1 August 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Coupled Interleaved Multicellular Parallel converters operated under switching frequency modulation
The Coupled Interleaved Multicellular Parallel (CIMP) topology is the subject of intense research because of its advantages in terms of systems integration, power density increase, low level of EMI emissions and dynamic performance. This paper evaluates the viability of application of switching frequency modulation techniques to CIMP topology.
- 1 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Effects of nonidealities in switching frequency modulation techniques: Application to coupled interleaved multicellular parallel converters
This paper explores the application of the Variable Delay Frequency Modulation (VDFM) to an Interleaved Multicellular Parallel converter. VDFM is a modulation technique specially intended to reduce conducted EMI generated by parallel converters. This technique combines interleaving and frequency modulation in such a way that provides the best attenuation. On the other hand, Coupled Interleaved Multicelular Parallel Converters (CIMPC) needs a perfect current sharing among phases. In this paper we consider the effect of VDFM nonidealities on the EMI attenuation in order to consider the application of this technique to CIMPC.
- 1 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Effects of nonidealities in switching frequency modulation techniques: Application to coupled interleaved multicellular parallel converters
This paper explores the application of the Variable Delay Frequency Modulation (VDFM) to an Interleaved Multicellular Parallel converter. VDFM is a modulation technique specially intended to reduce conducted EMI generated by parallel converters. This technique combines interleaving and frequency modulation in such a way that provides the best attenuation. On the other hand, Coupled Interleaved Multicelular Parallel Converters (CIMPC) needs a perfect current sharing among phases. In this paper we consider the effect of VDFM nonidealities on the EMI attenuation in order to consider the application of this technique to CIMPC.
- 7 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 60 (10) , 4590-4598
Wavelet-Based Approach to Evaluation of Signal Integrity
In this paper, we present a new approach to evaluation of signal integrity that is based on signal energy density as a function of time and frequency, represented by its wavelet scalogram. Using signal integrity ratio and cumulative energy ratio, we illustrate signal integrity analysis with simulated examples, followed by the demonstration of their usefulness through analysis of experimental data of a real audio amplifier. These figures of merit represent the extent to which the integrity of a signal is diminished by the electromagnetic interference effects and/or nonlinear processes.
- 7 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 60 (10) , 4590-4598
Wavelet-Based Approach to Evaluation of Signal Integrity
In this paper, we present a new approach to evaluation of signal integrity that is based on signal energy density as a function of time and frequency, represented by its wavelet scalogram. Using signal integrity ratio and cumulative energy ratio, we illustrate signal integrity analysis with simulated examples, followed by the demonstration of their usefulness through analysis of experimental data of a real audio amplifier. These figures of merit represent the extent to which the integrity of a signal is diminished by the electromagnetic interference effects and/or nonlinear processes.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Validation of EMI model for matrix converters
This paper is focused on the validation of a previously presented method to obtain conducted EMI in direct matrix converters (MC). Such model is based on a frequency domain equivalent circuit, which is applied to two different prototypes of MC in order to validate such method. This paper starts with a review of the EMI method and follows obtaining the equivalent circuit. The experimental part consists of a comparison between EMI simulation results and measured EMI in two different MC. Finally, the paper includes a discussion on the method generalisation.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Validation of EMI model for matrix converters
This paper is focused on the validation of a previously presented method to obtain conducted EMI in direct matrix converters (MC). Such model is based on a frequency domain equivalent circuit, which is applied to two different prototypes of MC in order to validate such method. This paper starts with a review of the EMI method and follows obtaining the equivalent circuit. The experimental part consists of a comparison between EMI simulation results and measured EMI in two different MC. Finally, the paper includes a discussion on the method generalisation.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. DS2c.1-1
Hybrid modulator for power converters in parallel topology
This paper presents a new mixed modulator that combines interleaving and spread-spectrum techniques in order to achieve the lowest level of conducted EMI generation. This modulator is addressed to power converters in parallel arrangement. The practical details of the hybrid modulator and controller implementation on a FPGA are explained. The characteristics of such modulator in terms of EMI reduction and converter performance are theoretically explored and experimentally validated in a four channel parallel buck converter operating in closed loop.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. DS2c.1-1
Hybrid modulator for power converters in parallel topology
This paper presents a new mixed modulator that combines interleaving and spread-spectrum techniques in order to achieve the lowest level of conducted EMI generation. This modulator is addressed to power converters in parallel arrangement. The practical details of the hybrid modulator and controller implementation on a FPGA are explained. The characteristics of such modulator in terms of EMI reduction and converter performance are theoretically explored and experimentally validated in a four channel parallel buck converter operating in closed loop.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. DS3e.177-1-DS3e.177-6
Extracurricular learning program for professional skills development in engineering schools
This paper presents an extracurricular program called INSPIRE3 that has been implemented by the ETSEIAT (Escola Tècnica Superior d'Enginyeries Industrial i Aeronàutica de Terrassa), a center belonging to the UPC-BarcelonaTech (Universitat Politècnica de Catalunya). This program is mainly addressed to facilitate cross-curricular skills and abilities development among students through collaborative-project based learning. The projection of an attractive external image of engineering degrees offered by ETSEIAT in order to increase the enrollment in such degrees is a secondary goal of this program. Under INSPIRE3, several real, challenging and multidisciplinary engineering projects are currently under development. In this paper, INSPIRE3 motivation, program management and implementation process are described and a short description of projects under development is given as well.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. DS3e.177-1-DS3e.177-6
Extracurricular learning program for professional skills development in engineering schools
This paper presents an extracurricular program called INSPIRE3 that has been implemented by the ETSEIAT (Escola Tècnica Superior d'Enginyeries Industrial i Aeronàutica de Terrassa), a center belonging to the UPC-BarcelonaTech (Universitat Politècnica de Catalunya). This program is mainly addressed to facilitate cross-curricular skills and abilities development among students through collaborative-project based learning. The projection of an attractive external image of engineering degrees offered by ETSEIAT in order to increase the enrollment in such degrees is a secondary goal of this program. Under INSPIRE3, several real, challenging and multidisciplinary engineering projects are currently under development. In this paper, INSPIRE3 motivation, program management and implementation process are described and a short description of projects under development is given as well.
- 1 January 2012
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 99 (1) , 103-112
EMI reduction by means of switching frequency modulation with variable delay in power supplies
In this article, a new model to predict the amplitude reduction of the interference harmonics in power supplies with parallel topology is presented when the switching frequency modulation with variable delay (VDFM) technique is applied. The VDFM method consists of combining the interleaving and switching frequency modulation (SFM) techniques. The new model presented has been evaluated in a multichannel buck converter, operating with different numbers of converters when a triangular modulation profile is used. Theoretical study and experimental results show the influence of the number of converters and the modulation parameters with regard to electromagnetic interference reduction. From the new model presented, it is possible to predict the value of modulation parameters and the numbers of converters in order to satisfy the required attenuation regarding the electromagnetic compatibility directives, when a triangular modulation profile is used.
- 1 January 2012
- Published by Taylor & Francis in International Journal of Electronics
- Vol. 99 (1) , 103-112
EMI reduction by means of switching frequency modulation with variable delay in power supplies
In this article, a new model to predict the amplitude reduction of the interference harmonics in power supplies with parallel topology is presented when the switching frequency modulation with variable delay (VDFM) technique is applied. The VDFM method consists of combining the interleaving and switching frequency modulation (SFM) techniques. The new model presented has been evaluated in a multichannel buck converter, operating with different numbers of converters when a triangular modulation profile is used. Theoretical study and experimental results show the influence of the number of converters and the modulation parameters with regard to electromagnetic interference reduction. From the new model presented, it is possible to predict the value of modulation parameters and the numbers of converters in order to satisfy the required attenuation regarding the electromagnetic compatibility directives, when a triangular modulation profile is used.
- 13 December 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 2 (2) , 240-247
Reduction of Electromagnetic Interference Susceptibility in Small-Signal Analog Circuits Using Complementary Split-Ring Resonators
Low-frequency analog and digital electronic circuits are susceptible to electromagnetic interference in the radiofrequency (RF) range. This disturbance is produced when the coupled RF signal is rectified by the nonlinear behavior of the semiconductors used in the small-signal analog input stage of the electronic system. Circuits based on operational amplifiers are usually employed for such input stages. These circuits present an amplitude modulation demodulation produced by the nonlinearity of internal transistors. Such a phenomenon generates demodulated signals in the low-frequency range. In this paper, this effect is suppressed by combining the conventional printed circuit board layout with complementary split-ring resonators (CSRRs). CSRRs are constitutive elements for the synthesis of metamaterials with negative effective permittivity, which are mainly excited to the host line by means of electric coupling. Electromagnetic simulations and experimental results show an effective rejection of the undesired RF demodulation effect with no extra cost in terms of the device area or manufacturing process.
- 13 December 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Components, Packaging and Manufacturing Technology
- Vol. 2 (2) , 240-247
Reduction of Electromagnetic Interference Susceptibility in Small-Signal Analog Circuits Using Complementary Split-Ring Resonators
Low-frequency analog and digital electronic circuits are susceptible to electromagnetic interference in the radiofrequency (RF) range. This disturbance is produced when the coupled RF signal is rectified by the nonlinear behavior of the semiconductors used in the small-signal analog input stage of the electronic system. Circuits based on operational amplifiers are usually employed for such input stages. These circuits present an amplitude modulation demodulation produced by the nonlinearity of internal transistors. Such a phenomenon generates demodulated signals in the low-frequency range. In this paper, this effect is suppressed by combining the conventional printed circuit board layout with complementary split-ring resonators (CSRRs). CSRRs are constitutive elements for the synthesis of metamaterials with negative effective permittivity, which are mainly excited to the host line by means of electric coupling. Electromagnetic simulations and experimental results show an effective rejection of the undesired RF demodulation effect with no extra cost in terms of the device area or manufacturing process.
- Open Access
- 1 November 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4086-4091
Contribution to conducted EMI reduction in multiconverter topology
This paper contributes to the conducted EMI reduction generated by switched power converters operating in multiconverter arrangement. The EMI reduction is achieved by means of the combination of two techniques: interleaving and switching frequency modulation. The effectiveness of such methods in terms of EMI reduction is experimentally validated in a four channel parallel buck converter. The technique that provides the best attenuation results is identified. Finally, special attention has been paid to possible undesired side-effects produced by these techniques. For this reason the converter efficiency and output voltage ripple are evaluated.
- 1 November 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 4086-4091
Open AccessContribution to conducted EMI reduction in multiconverter topology
This paper contributes to the conducted EMI reduction generated by switched power converters operating in multiconverter arrangement. The EMI reduction is achieved by means of the combination of two techniques: interleaving and switching frequency modulation. The effectiveness of such methods in terms of EMI reduction is experimentally validated in a four channel parallel buck converter. The technique that provides the best attenuation results is identified. Finally, special attention has been paid to possible undesired side-effects produced by these techniques. For this reason the converter efficiency and output voltage ripple are evaluated.
- 1 May 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 73-78
Control to reduce leading current in a Shunt Hybrid power filter
The main drawback of Shunt Hybrid Filters is the need of leading current injection. This paper describes a strategy to reduce the leading current in a three phase four wires LC coupled parallel hybrid filter for harmonics cancellation. Simulation and experimental results are given to show the behavior of the system.
- 1 May 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 73-78
Control to reduce leading current in a Shunt Hybrid power filter
The main drawback of Shunt Hybrid Filters is the need of leading current injection. This paper describes a strategy to reduce the leading current in a three phase four wires LC coupled parallel hybrid filter for harmonics cancellation. Simulation and experimental results are given to show the behavior of the system.