Hariharasakthisudhan Ponnarengan
Research Subjects
Hariharasakthisudhan Ponnarengan has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
- Kamaraj Logesh
Department of Mechanical Engineering Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology Chennai India
16 shared publications - Katharbasha Sathickbasha
B.S. Abdur Rahman Crescent Institute of Science and Technology
16 shared publications - Balachandran Surya Rajan
Department of Mechanical Engineering B.S. Abdur Rahman Crescent Institute of Science and Technology Chennai Tamil Nadu India
9 shared publications Logesh Kamaraj
Vel Tech Rangarajan Dr Sagunthala R&D Institute of Science and Technology
7 shared publicationsSathish Kannan
Amity University Dubai
7 shared publicationsK. Logesh
6 shared publications
Latest Publications
- 22 September 2026
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- p. 1-25
Rare-earth Y 2 O 3 modified interfaces for enhanced adhesion and fracture resistance in hybrid titanium fiber–metal laminates
1. Fiber–metal laminates (FMLs) are hybrid structural materials consisting of alternating metallic sheets and fiber-reinforced polymer layers. This architecture combines the complementary propertie...
- 22 September 2026
- Published by Taylor & Francis in Journal of Adhesion Science and Technology
- p. 1-25
Rare-earth Y 2 O 3 modified interfaces for enhanced adhesion and fracture resistance in hybrid titanium fiber–metal laminates
1. Fiber–metal laminates (FMLs) are hybrid structural materials consisting of alternating metallic sheets and fiber-reinforced polymer layers. This architecture combines the complementary propertie...
- 21 August 2026
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
Physics-informed process optimization of compression-molded titanium/carbon fiber metal laminates for enhanced flexural and interlaminar performance
The mechanical performance of titanium fiber–metal laminates is strongly influenced by consolidation parameters that govern resin infiltration, void formation, and interfacial bonding. This study presents a physics-informed framework for the process optimization of compression-molded Ti6Al4V/carbon fiber metal laminates with a 3/2 symmetric architecture. A D-optimal experimental design was employed to investigate the effects of molding temperature, pressure, dwell time, and thermal ramp rates on effective flexural rigidity, interlaminar shear strength, and void fraction. Laminate bending mechanics incorporating porosity-dependent stiffness degradation were integrated within a residual learning scheme to ensure physically consistent predictions. The developed PIML surrogate showed good cross-validated predictive performance, with R 2 values of 0.960, 0.959, and 0.887 for effective flexural rigidity, interlaminar shear strength, and void fraction, respectively. Multi-objective optimization identified a processing window that simultaneously maintained high flexural rigidity and interlaminar shear strength while minimizing porosity, with experimental deviations below 3% for the mechanical responses and below 4.2% for the void fraction. Fractographic analysis revealed matrix shear yielding, interfacial decohesion, and fiber bridging, confirming progressive damage mechanisms. The proposed framework establishes a robust processing–structure–performance linkage for titanium-based hybrid laminates and supports manufacturing optimization of reinforced composite systems.
- 21 August 2026
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
Physics-informed process optimization of compression-molded titanium/carbon fiber metal laminates for enhanced flexural and interlaminar performance
The mechanical performance of titanium fiber–metal laminates is strongly influenced by consolidation parameters that govern resin infiltration, void formation, and interfacial bonding. This study presents a physics-informed framework for the process optimization of compression-molded Ti6Al4V/carbon fiber metal laminates with a 3/2 symmetric architecture. A D-optimal experimental design was employed to investigate the effects of molding temperature, pressure, dwell time, and thermal ramp rates on effective flexural rigidity, interlaminar shear strength, and void fraction. Laminate bending mechanics incorporating porosity-dependent stiffness degradation were integrated within a residual learning scheme to ensure physically consistent predictions. The developed PIML surrogate showed good cross-validated predictive performance, with R 2 values of 0.960, 0.959, and 0.887 for effective flexural rigidity, interlaminar shear strength, and void fraction, respectively. Multi-objective optimization identified a processing window that simultaneously maintained high flexural rigidity and interlaminar shear strength while minimizing porosity, with experimental deviations below 3% for the mechanical responses and below 4.2% for the void fraction. Fractographic analysis revealed matrix shear yielding, interfacial decohesion, and fiber bridging, confirming progressive damage mechanisms. The proposed framework establishes a robust processing–structure–performance linkage for titanium-based hybrid laminates and supports manufacturing optimization of reinforced composite systems.
- 7 August 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (11) , 4652-4676
Fatigue Damage of AA2024 Fiber–Metal Laminates With Architected TPU Interlayers and Graphene‐Modified Interfaces
This study investigates the fatigue behavior of Aluminum 2024 fiber–metal laminates incorporating three‐dimensionally printed thermoplastic polyurethane core architectures and graphene‐modified adhesive interfaces. Three core geometries, namely, diagonal, diamond, and hexagonal patterns, were evaluated with graphene contents of 0, 1.0, and 1.5 wt.% under different cyclic stress ratios. Mechanical and fatigue results showed that graphene‐modified interfaces and architected elastomer cores significantly improved load transfer, energy dissipation, and cyclic damage resistance. Tensile strength increased from 387.02 to 493.34 MPa, whereas impact energy improved from 12.18 to 24.02 J. The diamond architecture with 1.5‐wt.% graphene exhibited superior fatigue resistance, sustaining approximately 260–270 MPa at one million cycles. Stiffness degradation and accumulated strain analyses confirmed delayed damage evolution, improved stiffness retention, and reduced cyclic deformation. Fractographic observations indicated fiber bridging, fibrillar pull‐out, crack deflection, and limited delamination as dominant fatigue resistance mechanisms.
- 7 August 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (11) , 4652-4676
Fatigue Damage of AA2024 Fiber–Metal Laminates With Architected TPU Interlayers and Graphene‐Modified Interfaces
This study investigates the fatigue behavior of Aluminum 2024 fiber–metal laminates incorporating three‐dimensionally printed thermoplastic polyurethane core architectures and graphene‐modified adhesive interfaces. Three core geometries, namely, diagonal, diamond, and hexagonal patterns, were evaluated with graphene contents of 0, 1.0, and 1.5 wt.% under different cyclic stress ratios. Mechanical and fatigue results showed that graphene‐modified interfaces and architected elastomer cores significantly improved load transfer, energy dissipation, and cyclic damage resistance. Tensile strength increased from 387.02 to 493.34 MPa, whereas impact energy improved from 12.18 to 24.02 J. The diamond architecture with 1.5‐wt.% graphene exhibited superior fatigue resistance, sustaining approximately 260–270 MPa at one million cycles. Stiffness degradation and accumulated strain analyses confirmed delayed damage evolution, improved stiffness retention, and reduced cyclic deformation. Fractographic observations indicated fiber bridging, fibrillar pull‐out, crack deflection, and limited delamination as dominant fatigue resistance mechanisms.
- 29 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Physics-guided machine learning modelling of reactive-extrusion manufacturing of graphene-reinforced silicone and tribological behaviour
A modified reactive-extrusion platform was developed to fabricate graphene-reinforced Ecoflex components with reliable deposition, controlled geometry, and functional surface quality. The system enabled continuous mixing and extrusion of a two-part silicone feedstock through dual-syringe delivery, overcoming common issues of premature curing, material backflow, and layer discontinuity. A D-optimal experimental scheme evaluated the influence of graphene loading, nozzle diameter, extrusion multiplier, and print speed on manufacturability and tribological response. All combinations achieved stable filament formation and acceptable dimensional deviation (∼2%–6%), indicating robust printability within the tested operating range. Graphene reinforcement enhanced layer consolidation and reduced surface irregularity, while retaining low processing resistance. Printed samples exhibited lower coefficients of friction and wear compared to neat silicone, without compromising shape fidelity. Independent validation showed prediction deviations below 2%, confirming consistent process behaviour. The results demonstrate that reactive extrusion can produce functionally enhanced elastomer parts with predictable form accuracy and durable sliding surfaces.
- 29 May 2026
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Physics-guided machine learning modelling of reactive-extrusion manufacturing of graphene-reinforced silicone and tribological behaviour
A modified reactive-extrusion platform was developed to fabricate graphene-reinforced Ecoflex components with reliable deposition, controlled geometry, and functional surface quality. The system enabled continuous mixing and extrusion of a two-part silicone feedstock through dual-syringe delivery, overcoming common issues of premature curing, material backflow, and layer discontinuity. A D-optimal experimental scheme evaluated the influence of graphene loading, nozzle diameter, extrusion multiplier, and print speed on manufacturability and tribological response. All combinations achieved stable filament formation and acceptable dimensional deviation (∼2%–6%), indicating robust printability within the tested operating range. Graphene reinforcement enhanced layer consolidation and reduced surface irregularity, while retaining low processing resistance. Printed samples exhibited lower coefficients of friction and wear compared to neat silicone, without compromising shape fidelity. Independent validation showed prediction deviations below 2%, confirming consistent process behaviour. The results demonstrate that reactive extrusion can produce functionally enhanced elastomer parts with predictable form accuracy and durable sliding surfaces.
- 27 April 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (30) , 31048-31071
Modeling and Optimization of Alumina Filler-Enhanced Epoxy/Mulberry Fiber Composites Using Stacked Ensemble Modeling and Multi-objective Moth Swarm Algorithm
- 27 April 2026
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 35 (30) , 31048-31071
Modeling and Optimization of Alumina Filler-Enhanced Epoxy/Mulberry Fiber Composites Using Stacked Ensemble Modeling and Multi-objective Moth Swarm Algorithm
- 31 March 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (6) , 2993-3023
Stress Ratio Effects on Fatigue Life, Crack Growth, and Fracture Mechanisms in Ti/Kevlar–Jute Hybrid Fiber Metal Laminates
- 31 March 2026
- Published by Springer Nature in Fibers and Polymers
- Vol. 27 (6) , 2993-3023
Stress Ratio Effects on Fatigue Life, Crack Growth, and Fracture Mechanisms in Ti/Kevlar–Jute Hybrid Fiber Metal Laminates
- 6 March 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (6) , 2116-2137
Mode I Fracture, Fatigue, and Interface Toughening in Ti/Al Laminates Using Alumina With Pineapple–Carbon Fiber Reinforcement
Facesheet selection and alumina‐modified adhesive were examined as coupled design variables controlling the mechanical response of dual‐metal 3/2 Ti/Al fiber–metal laminates reinforced with pineapple–carbon hybrid fibers. Titanium‐ and aluminum‐skinned laminates containing 0, 2, 3, and 4 wt.% Al 2 O 3 in the epoxy bondline were evaluated under tensile loading, Mode I fracture, tension–tension fatigue, and Izod impact. Titanium‐skinned laminates consistently exhibited higher stiffness, tensile strength, fracture resistance, and fatigue life. At 4 wt.% Al 2 O 3 , the ultimate tensile strength reached ~1.2 GPa and fracture initiation toughness increased to ~330–360 kJ m −2 , with fatigue life of ~6.1 × 10 5 cycles at 60% of ultimate strength. Aluminum‐skinned laminates absorbed higher impact energy, peaking near ~80 J at moderate alumina contents due to greater facesheet plasticity. Alumina addition enhanced interfacial load transfer and delayed debonding, revealing a mode‐dependent design window for durability‐ or impact‐driven applications.
- 6 March 2026
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 49 (6) , 2116-2137
Mode I Fracture, Fatigue, and Interface Toughening in Ti/Al Laminates Using Alumina With Pineapple–Carbon Fiber Reinforcement
Facesheet selection and alumina‐modified adhesive were examined as coupled design variables controlling the mechanical response of dual‐metal 3/2 Ti/Al fiber–metal laminates reinforced with pineapple–carbon hybrid fibers. Titanium‐ and aluminum‐skinned laminates containing 0, 2, 3, and 4 wt.% Al 2 O 3 in the epoxy bondline were evaluated under tensile loading, Mode I fracture, tension–tension fatigue, and Izod impact. Titanium‐skinned laminates consistently exhibited higher stiffness, tensile strength, fracture resistance, and fatigue life. At 4 wt.% Al 2 O 3 , the ultimate tensile strength reached ~1.2 GPa and fracture initiation toughness increased to ~330–360 kJ m −2 , with fatigue life of ~6.1 × 10 5 cycles at 60% of ultimate strength. Aluminum‐skinned laminates absorbed higher impact energy, peaking near ~80 J at moderate alumina contents due to greater facesheet plasticity. Alumina addition enhanced interfacial load transfer and delayed debonding, revealing a mode‐dependent design window for durability‐ or impact‐driven applications.
- 28 February 2026
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 20 (6) , 2851-2887
Finite-element, ensemble learning and grey-wolf optimization of open-cutout titanium fiber metal laminates
- 28 February 2026
- Published by Springer Nature in International Journal on Interactive Design and Manufacturing (IJIDeM)
- Vol. 20 (6) , 2851-2887
Finite-element, ensemble learning and grey-wolf optimization of open-cutout titanium fiber metal laminates
- 30 January 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (11) , 10161-10177
Tailoring Tribological Performance of Brake Friction Composites Using Copper Coated and Annealed Steel Fiber Reinforcements
This study presents a novel investigation into the tribological behavior of brake friction composites reinforced with copper‐coated mild steel fibers (CMSF) and copper‐coated annealed steel fibers (CASF), targeting improved wear resistance and frictional stability under dynamic braking conditions. Addressing a key research gap in optimizing metallic fiber surface conditions for thermal and mechanical synergy, the work aims to elucidate the structure property performance relationship associated with different coating volumes and thermal treatments. A series of non‐asbestos organic (NAO) brake pad formulations were fabricated by compound molding, incorporating 50 mL and 100 mL of CMSF and CASF into a standardized friction matrix. Tribological evaluations were conducted using a pin‐on‐disc tribometer per ASTM G99 at varying loads (10–50 N) and speeds (1–3 m/s). Worn surface morphologies were analyzed via SEM to decode wear mechanisms. The results revealed that 50CASF composites achieved the lowest specific wear rate (SWR) (1.2 × 10 −6 to 2.5 × 10 −6 mm 3 /N·m) and a stable Coefficient of Friction (CoF) (0.42–0.47), attributed to dense debris compaction and protective tribolayer formation. In contrast, 100 CMSF composites exhibited higher wear due to fiber matrix decohesion and debris agglomeration. Microstructural features confirmed that annealing promotes ductile interfacial behavior while copper coating enhances thermal transport and smearing effects. The research establishes clear guidelines for tailoring metallic reinforcement architecture in brake pads, with 50CASF emerging as an optimal formulation for high‐performance applications. The findings offer pathways for designing next‐generation tribo‐materials by engineering reinforcement surfaces for enhanced durability, thermal stability, and consistent braking performance.
- 30 January 2026
- Published by Wiley in Polymer Composites
- Vol. 47 (11) , 10161-10177
Tailoring Tribological Performance of Brake Friction Composites Using Copper Coated and Annealed Steel Fiber Reinforcements
This study presents a novel investigation into the tribological behavior of brake friction composites reinforced with copper‐coated mild steel fibers (CMSF) and copper‐coated annealed steel fibers (CASF), targeting improved wear resistance and frictional stability under dynamic braking conditions. Addressing a key research gap in optimizing metallic fiber surface conditions for thermal and mechanical synergy, the work aims to elucidate the structure property performance relationship associated with different coating volumes and thermal treatments. A series of non‐asbestos organic (NAO) brake pad formulations were fabricated by compound molding, incorporating 50 mL and 100 mL of CMSF and CASF into a standardized friction matrix. Tribological evaluations were conducted using a pin‐on‐disc tribometer per ASTM G99 at varying loads (10–50 N) and speeds (1–3 m/s). Worn surface morphologies were analyzed via SEM to decode wear mechanisms. The results revealed that 50CASF composites achieved the lowest specific wear rate (SWR) (1.2 × 10 −6 to 2.5 × 10 −6 mm 3 /N·m) and a stable Coefficient of Friction (CoF) (0.42–0.47), attributed to dense debris compaction and protective tribolayer formation. In contrast, 100 CMSF composites exhibited higher wear due to fiber matrix decohesion and debris agglomeration. Microstructural features confirmed that annealing promotes ductile interfacial behavior while copper coating enhances thermal transport and smearing effects. The research establishes clear guidelines for tailoring metallic reinforcement architecture in brake pads, with 50CASF emerging as an optimal formulation for high‐performance applications. The findings offer pathways for designing next‐generation tribo‐materials by engineering reinforcement surfaces for enhanced durability, thermal stability, and consistent braking performance.