Pooja Gupta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pooja Gupta has a total of 203 co-authors. Here are the top co-authors by number of shared publications:
- Dileep Kumar
UGC‐DAE Consortium for Scientific Research Indore India
6 shared publications - Sanjay Kumar Rai
Indus Synchrotrons Utilization Division, Raja Ramanna Centre for Advanced Technology 1 , Indore 452013
6 shared publications Mukul Gupta
5 shared publications- Prasad A. Naik
Graduate School of Management, University of California Davis, Davis, California 95616
5 shared publications Sanjay Rai
5 shared publicationsAkhilesh Kumar
4 shared publications
Latest Publications
Interface‐Engineered Magnetic Anisotropy in Zigzag Nanostructured Thin Films
Precise control of uniaxial magnetic anisotropy (UMA) in thin films is essential for next‐generation spintronic devices and magnetic sensors. While conventional oblique‐angle deposition (OAD) engineers this anisotropy via tilted columnar nanostructures, it is fundamentally limited by morphological instabilities at larger thicknesses. The present study utilises sequential oblique‐angle deposition (S‐OAD), which overcomes these limitations by fabricating zigzag nanostructures that prevent column merging and introduce periodically repeated high‐density interfaces. In this study, the precise influence of these engineered interfaces on macroscopic magnetic behaviour has been systematically studied by increasing the number of zigzag bilayers. An unusual anisotropy crossover in zigzag cobalt (Co) films is observed with increasing bilayer number, which led us to identify a novel magnetic anisotropy component: an interface‐induced shape anisotropy originating from the high‐density junctions (interfaces) between oppositely tilted columns, which competes with texture‐driven magnetocrystalline anisotropy (MCA) of Co. The universality of this interface‐driven mechanism is further validated in Heusler alloy Co 2 FeAl films, where strong UMA is achieved despite intrinsically weak MCA. These findings establish S‐OAD as a platform that introduces interfaces as a new structural degree of freedom, providing a versatile route for precise tuning of UMA in nanostructured multilayers for spintronic applications.
Interface‐Engineered Magnetic Anisotropy in Zigzag Nanostructured Thin Films
Precise control of uniaxial magnetic anisotropy (UMA) in thin films is essential for next‐generation spintronic devices and magnetic sensors. While conventional oblique‐angle deposition (OAD) engineers this anisotropy via tilted columnar nanostructures, it is fundamentally limited by morphological instabilities at larger thicknesses. The present study utilises sequential oblique‐angle deposition (S‐OAD), which overcomes these limitations by fabricating zigzag nanostructures that prevent column merging and introduce periodically repeated high‐density interfaces. In this study, the precise influence of these engineered interfaces on macroscopic magnetic behaviour has been systematically studied by increasing the number of zigzag bilayers. An unusual anisotropy crossover in zigzag cobalt (Co) films is observed with increasing bilayer number, which led us to identify a novel magnetic anisotropy component: an interface‐induced shape anisotropy originating from the high‐density junctions (interfaces) between oppositely tilted columns, which competes with texture‐driven magnetocrystalline anisotropy (MCA) of Co. The universality of this interface‐driven mechanism is further validated in Heusler alloy Co 2 FeAl films, where strong UMA is achieved despite intrinsically weak MCA. These findings establish S‐OAD as a platform that introduces interfaces as a new structural degree of freedom, providing a versatile route for precise tuning of UMA in nanostructured multilayers for spintronic applications.
- 7 October 2026
- Published by Elsevier in Surfaces and Interfaces
- Vol. 101
Loss of quantum coherence in Bi₁.₉₅Sb₀.₀₅Se₃ topological thin films by substrate temperature-induced grain size evolution
- 7 October 2026
- Published by Elsevier in Surfaces and Interfaces
- Vol. 101
Loss of quantum coherence in Bi₁.₉₅Sb₀.₀₅Se₃ topological thin films by substrate temperature-induced grain size evolution
- Open Access
- 17 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (87) , e78474
Multiscale Symmetry Breaking Enables Tunable Magnetic Anisotropy and Damping in Co 2 FeAl Thin Films
The ability to simultaneously engineer magnetic stability and spin dissipation remains difficult to realize in scalable metallic thin films. Here, we show that multiscale symmetry breaking provides a route to achieve this control in polycrystalline Co 2 FeAl films without epitaxy, compositional complexity, or heavy‐metal incorporation. By combining nanoscale ripple templating, oblique‐angle deposition (OAD), and mechanical strain, we create a magnetic architecture composed of conformally tilted nanocolumns embedded within a strain‐biased energy landscape. This cooperative design generates a robust and tunable in‐plane uniaxial magnetic anisotropy (UMA), with the anisotropy field increasing from ≈20 Oe in the isotropic reference film to ≈250 Oe (∼1200%) in the OAD‐ripple template film and further to ≈360 Oe (1700%) under strain, while simultaneously driving a threefold enhancement of the effective damping. Correlative structural, spectroscopic, and magnetic measurements reveal physically distinct, dominant microscopic mechanisms driving UMA and damping: anisotropy is governed primarily by ripple‐directed shape anisotropy and magnetoelastic energy, whereas damping is enhanced by nanocolumnar structure and strain‐induced orbital‐moment unquenching leading to strengthened spin–orbit coupling. This work establishes nanoscale morphology and mechanical deformation as tunable design parameters for adaptive spintronics, flexible microwave technologies, and strain‐tunable magnonics.
- 17 September 2026
- Published by Wiley in Advanced Functional Materials
- Vol. 36 (87) , e78474
Open AccessMultiscale Symmetry Breaking Enables Tunable Magnetic Anisotropy and Damping in Co 2 FeAl Thin Films
The ability to simultaneously engineer magnetic stability and spin dissipation remains difficult to realize in scalable metallic thin films. Here, we show that multiscale symmetry breaking provides a route to achieve this control in polycrystalline Co 2 FeAl films without epitaxy, compositional complexity, or heavy‐metal incorporation. By combining nanoscale ripple templating, oblique‐angle deposition (OAD), and mechanical strain, we create a magnetic architecture composed of conformally tilted nanocolumns embedded within a strain‐biased energy landscape. This cooperative design generates a robust and tunable in‐plane uniaxial magnetic anisotropy (UMA), with the anisotropy field increasing from ≈20 Oe in the isotropic reference film to ≈250 Oe (∼1200%) in the OAD‐ripple template film and further to ≈360 Oe (1700%) under strain, while simultaneously driving a threefold enhancement of the effective damping. Correlative structural, spectroscopic, and magnetic measurements reveal physically distinct, dominant microscopic mechanisms driving UMA and damping: anisotropy is governed primarily by ripple‐directed shape anisotropy and magnetoelastic energy, whereas damping is enhanced by nanocolumnar structure and strain‐induced orbital‐moment unquenching leading to strengthened spin–orbit coupling. This work establishes nanoscale morphology and mechanical deformation as tunable design parameters for adaptive spintronics, flexible microwave technologies, and strain‐tunable magnonics.
- Open Access
- 30 June 2026
- Published by Elsevier in SSRN Electronic Journal
Suppression of Bulk Conduction and Enhanced Phase-Coherent Transport in Sb-Doped Bi₂Se₃ Thin Films
Sb-doped Bi₂Se₃ thin films were deposited by pulsed laser deposition under argon background pressures ranging from vacuum to 0.5 mbar to investigate the influence of deposition pressure on their structural and quantum transport properties. GI-XRD, SEM, and Raman analysis reveal a systematic improvement in crystallinity, surface morphology, and structural ordering with increasing argon pressure. Temperature-dependent resistivity measurements exhibit an evolution in electronic transport, while Hall measurements indicate a reduction in carrier concentration, suggesting suppressed bulk conduction at higher deposition pressures. Low-field magnetoconductance measurements show pronounced weak antilocalization behavior with increasing pressure. Quantitative fitting using the Hikami–Larkin–Nagaoka model reveals an increase in the phase-coherence length (LΦ) and a decrease in the effective number of conducting channels (α), indicating enhanced surface-state transport. The film deposited at 0.5 mbar exhibits the strongest topological transport characteristics, demonstrating that argon pressure is an effective parameter for optimizing the transport properties of Sb-doped Bi₂Se₃ thin films.
- 30 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSuppression of Bulk Conduction and Enhanced Phase-Coherent Transport in Sb-Doped Bi₂Se₃ Thin Films
Sb-doped Bi₂Se₃ thin films were deposited by pulsed laser deposition under argon background pressures ranging from vacuum to 0.5 mbar to investigate the influence of deposition pressure on their structural and quantum transport properties. GI-XRD, SEM, and Raman analysis reveal a systematic improvement in crystallinity, surface morphology, and structural ordering with increasing argon pressure. Temperature-dependent resistivity measurements exhibit an evolution in electronic transport, while Hall measurements indicate a reduction in carrier concentration, suggesting suppressed bulk conduction at higher deposition pressures. Low-field magnetoconductance measurements show pronounced weak antilocalization behavior with increasing pressure. Quantitative fitting using the Hikami–Larkin–Nagaoka model reveals an increase in the phase-coherence length (LΦ) and a decrease in the effective number of conducting channels (α), indicating enhanced surface-state transport. The film deposited at 0.5 mbar exhibits the strongest topological transport characteristics, demonstrating that argon pressure is an effective parameter for optimizing the transport properties of Sb-doped Bi₂Se₃ thin films.
- Open Access
- 19 June 2026
- Published by Elsevier in SSRN Electronic Journal
Deposition Pressure-Tuned Topological Transport in PLD Grown Sb-Doped Bi2Se3 Thin Films
Sb-doped Bi₂Se₃ thin films were deposited by the pulsed laser deposition technique under argon background pressures ranging from vacuum to 0.5 mbar to study the effect of growth pressure on structural and quantum transport properties. An improvement in crystallinity, as confirmed by GI-XRD, is observed with increasing deposition pressure, accompanied by an enhanced surface morphology as seen through Scanning Electron Microscopy (SEM). Raman spectroscopy provides further evidence of improved structural ordering with increasing deposition pressure. Temperature-dependent resistivity measurements show a systematic evolution with deposition pressure. Hall effect measurements reveal changes in carrier concentration, indicating a reduced bulk contribution at higher pressures. Low-field magnetoconductance measurements reveal weak antilocalization signatures (WAL), which become progressively prominent with increasing argon pressure. Quantitative analysis using the Hikami–Larkin–Nagaoka model demonstrates an enhanced phase-coherence length (LF) and a reduction in the effective number of conducting channels (a), with the film grown at 0.5 mbar exhibiting the pronounced topological transport behavior. These findings highlight argon background pressure as an effective growth parameter for tuning structure transport correlations in Sb-doped Bi₂Se₃ thin films.
- 19 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessDeposition Pressure-Tuned Topological Transport in PLD Grown Sb-Doped Bi2Se3 Thin Films
Sb-doped Bi₂Se₃ thin films were deposited by the pulsed laser deposition technique under argon background pressures ranging from vacuum to 0.5 mbar to study the effect of growth pressure on structural and quantum transport properties. An improvement in crystallinity, as confirmed by GI-XRD, is observed with increasing deposition pressure, accompanied by an enhanced surface morphology as seen through Scanning Electron Microscopy (SEM). Raman spectroscopy provides further evidence of improved structural ordering with increasing deposition pressure. Temperature-dependent resistivity measurements show a systematic evolution with deposition pressure. Hall effect measurements reveal changes in carrier concentration, indicating a reduced bulk contribution at higher pressures. Low-field magnetoconductance measurements reveal weak antilocalization signatures (WAL), which become progressively prominent with increasing argon pressure. Quantitative analysis using the Hikami–Larkin–Nagaoka model demonstrates an enhanced phase-coherence length (LF) and a reduction in the effective number of conducting channels (a), with the film grown at 0.5 mbar exhibiting the pronounced topological transport behavior. These findings highlight argon background pressure as an effective growth parameter for tuning structure transport correlations in Sb-doped Bi₂Se₃ thin films.
- Open Access
- 18 June 2026
- Published by Elsevier in SSRN Electronic Journal
Loss of Quantum Coherence in Bi₁.₉₅Sb₀.₀₅Se₃ Topological Thin Films by Substrate Temperature-Induced Grain Size Evolution
Sb-doped Bi2Se3 thin films were deposited using pulsed laser deposition (PLD) at different substrate temperatures ranging from 200 °C to 350 °C. Structural and vibrational analysis using grazing-incidence X-ray diffraction (GI-XRD) and Raman spectroscopy reveal that higher substrate temperatures enhance c-axis-oriented growth and improve crystallinity. Scanning electron microscopy (SEM) studies indicate a temperature-dependent evolution of surface morphology, with grain size increasing from ~22 nm to ~85 nm. I–V measurements and surface morphology maps obtained using a Scanning Tunneling Microscope (STM) indicate a reduction in the band gap from 0.34 eV to 0.146 eV with increasing substrate temperature and reveal progressive grain coalescence and a decrease in surface roughness. Magnetotransport measurements exhibit a transition from classical parabolic magnetoresistance (R α B²) in samples deposited at lower temperatures to weak antilocalization (WAL) quantum behaviour for samples deposited at higher substrate temperatures. These results highlight the crucial role of substrate temperature on grain morphology and size, as well as its effect on quantum transport signatures in Sb-doped Bi2Se3 topological insulator thin films.
- 18 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessLoss of Quantum Coherence in Bi₁.₉₅Sb₀.₀₅Se₃ Topological Thin Films by Substrate Temperature-Induced Grain Size Evolution
Sb-doped Bi2Se3 thin films were deposited using pulsed laser deposition (PLD) at different substrate temperatures ranging from 200 °C to 350 °C. Structural and vibrational analysis using grazing-incidence X-ray diffraction (GI-XRD) and Raman spectroscopy reveal that higher substrate temperatures enhance c-axis-oriented growth and improve crystallinity. Scanning electron microscopy (SEM) studies indicate a temperature-dependent evolution of surface morphology, with grain size increasing from ~22 nm to ~85 nm. I–V measurements and surface morphology maps obtained using a Scanning Tunneling Microscope (STM) indicate a reduction in the band gap from 0.34 eV to 0.146 eV with increasing substrate temperature and reveal progressive grain coalescence and a decrease in surface roughness. Magnetotransport measurements exhibit a transition from classical parabolic magnetoresistance (R α B²) in samples deposited at lower temperatures to weak antilocalization (WAL) quantum behaviour for samples deposited at higher substrate temperatures. These results highlight the crucial role of substrate temperature on grain morphology and size, as well as its effect on quantum transport signatures in Sb-doped Bi2Se3 topological insulator thin films.
- Open Access
- 6 May 2026
- Published by Elsevier in SSRN Electronic Journal
Interface Induced Magnetoresistance and Complex Anomalous Hall Effect in the Gd/Co Multilayer
The interface structure and microstructure of ferrimagnetic rare earth-transition metal thin films control their magnetic properties, which are highly tunable near the compensation temperature and present significant opportunities for ultrafast magnetic switching in spintronic devices. We investigate the temperature-dependent longitudinal resistance (Rxx) and transverse (Hall) resistance (Rxy) measurements as a function of magnetic field applied perpendicular to the plane of the Gd/Co multilayer in pristine (as-deposited) and annealed states. Isothermal annealing at 573 K for varying times controlled the interface structure and morphology, which influenced the strong antiferromagnetic exchange interaction at the Gd-Co interfaces and consequently the electronic transport properties. The pristine Gd/Co multilayer showed a compensation temperature of 215 K, and we observed a sign reversal in the longitudinal resistance (magnetoresistance, MR) and anomalous Hall effect (AHE) across this temperature. X-ray scattering and polarized neutron reflectivity results reveal the formation of a Kagomé magnet alloy (GdCo2) phase at the interfaces upon annealing of the pristine Gd/Co multilayer, which influences the exchange interactions across the interfaces and reveals unconventional MR and complex AHE. In contrast to the pristine Gd/Co multilayer and ferromagnetic transition metals, the annealed Gd/Co multilayer displays unique MR and AHE properties. Our results demonstrate that RE-TM multilayer ferrimagnets offer a dynamic tool for fine-tuning interface exchange interactions and governing spin transport, ultimately contributing to advancements in antiferromagnetic spin devices.
- 6 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessInterface Induced Magnetoresistance and Complex Anomalous Hall Effect in the Gd/Co Multilayer
The interface structure and microstructure of ferrimagnetic rare earth-transition metal thin films control their magnetic properties, which are highly tunable near the compensation temperature and present significant opportunities for ultrafast magnetic switching in spintronic devices. We investigate the temperature-dependent longitudinal resistance (Rxx) and transverse (Hall) resistance (Rxy) measurements as a function of magnetic field applied perpendicular to the plane of the Gd/Co multilayer in pristine (as-deposited) and annealed states. Isothermal annealing at 573 K for varying times controlled the interface structure and morphology, which influenced the strong antiferromagnetic exchange interaction at the Gd-Co interfaces and consequently the electronic transport properties. The pristine Gd/Co multilayer showed a compensation temperature of 215 K, and we observed a sign reversal in the longitudinal resistance (magnetoresistance, MR) and anomalous Hall effect (AHE) across this temperature. X-ray scattering and polarized neutron reflectivity results reveal the formation of a Kagomé magnet alloy (GdCo2) phase at the interfaces upon annealing of the pristine Gd/Co multilayer, which influences the exchange interactions across the interfaces and reveals unconventional MR and complex AHE. In contrast to the pristine Gd/Co multilayer and ferromagnetic transition metals, the annealed Gd/Co multilayer displays unique MR and AHE properties. Our results demonstrate that RE-TM multilayer ferrimagnets offer a dynamic tool for fine-tuning interface exchange interactions and governing spin transport, ultimately contributing to advancements in antiferromagnetic spin devices.
- Open Access
- 14 April 2026
- Published by Elsevier in SSRN Electronic Journal
Ultra-High vacuum compatible AA6061- SS316L tubular transition joint
Aluminium, owing to its excellent versatility, is widely employed in vacuum applications, particularly in the fabrication of vacuum chambers for particle accelerators. The vacuum chambers of the Indus-2 synchrotron facility (2.5 GeV, 200 mA) at Raja Ramanna Centre for Advanced Technology predominantly utilize AA 5083-H321, AA 6063-T6, and AA 6061-T6. However, most of the associated gauges, pumps, and piping connected to vacuum chambers along with other aluminium components are manufactured from stainless steel (SS), necessitating reliable aluminium–stainless steel transition joints. In nuclear reactor applications, these transition joints are employed in irradiation capsules, neutron-sensitive ion chambers, ion chambers for environmental monitoring, research reactors, and accelerator driven sub-critical systems. In the present study, an ultra-high-vacuum (UHV) compatible transition joint between AA 6061-T6 and SS 316L is developed through a systematic parametric investigation using diffusion bonding at 500 °C, with diffusion time varied from 1 min to 4 h under thermal loading. The diffusion-bonded joints exhibited tensile strengths of 50 MPa to 140 MPa depending upon the process time. The joint interface and fracture surfaces were characterized using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). X-ray diffraction (XRD) was performed on the fracture surfaces at BL-02 of Indus-2 synchrotron radiation source for intermetallic phase identification. Hermeticity of all joints were tested using helium mass spectrometry, confirming no leak in the helium background up to 1E-09 mbar·l/s with ultimate pressure of 1E-09 mbar after five consecutive 48-hour bake-out cycles at 150 °C and liquid-nitrogen thermal shocks. These results demonstrate the robustness and reliability of the developed AA 6061–SS 316L diffusion-bonded joint, making it highly suitable for accelerator and nuclear systems.
- 14 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessUltra-High vacuum compatible AA6061- SS316L tubular transition joint
Aluminium, owing to its excellent versatility, is widely employed in vacuum applications, particularly in the fabrication of vacuum chambers for particle accelerators. The vacuum chambers of the Indus-2 synchrotron facility (2.5 GeV, 200 mA) at Raja Ramanna Centre for Advanced Technology predominantly utilize AA 5083-H321, AA 6063-T6, and AA 6061-T6. However, most of the associated gauges, pumps, and piping connected to vacuum chambers along with other aluminium components are manufactured from stainless steel (SS), necessitating reliable aluminium–stainless steel transition joints. In nuclear reactor applications, these transition joints are employed in irradiation capsules, neutron-sensitive ion chambers, ion chambers for environmental monitoring, research reactors, and accelerator driven sub-critical systems. In the present study, an ultra-high-vacuum (UHV) compatible transition joint between AA 6061-T6 and SS 316L is developed through a systematic parametric investigation using diffusion bonding at 500 °C, with diffusion time varied from 1 min to 4 h under thermal loading. The diffusion-bonded joints exhibited tensile strengths of 50 MPa to 140 MPa depending upon the process time. The joint interface and fracture surfaces were characterized using scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). X-ray diffraction (XRD) was performed on the fracture surfaces at BL-02 of Indus-2 synchrotron radiation source for intermetallic phase identification. Hermeticity of all joints were tested using helium mass spectrometry, confirming no leak in the helium background up to 1E-09 mbar·l/s with ultimate pressure of 1E-09 mbar after five consecutive 48-hour bake-out cycles at 150 °C and liquid-nitrogen thermal shocks. These results demonstrate the robustness and reliability of the developed AA 6061–SS 316L diffusion-bonded joint, making it highly suitable for accelerator and nuclear systems.
- 9 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 4 (3) , 949-961
Low-Refractive Index Ta 2 O 5 versus Hybrid TiO 2 –SiO 2 for Laser-Durable Broadband Antireflection Coatings
- 9 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 4 (3) , 949-961
Low-Refractive Index Ta 2 O 5 versus Hybrid TiO 2 –SiO 2 for Laser-Durable Broadband Antireflection Coatings
- 28 February 2026
- Published by Elsevier in Applied Surface Science
- Vol. 731
Control of surface and interface state recombination in ZrO2/GaAs heterostructure by dual ion beam sputtering deposition
- 28 February 2026
- Published by Elsevier in Applied Surface Science
- Vol. 731
Control of surface and interface state recombination in ZrO2/GaAs heterostructure by dual ion beam sputtering deposition