NANarges Ashraf

Narges Ashraf

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Narges Ashraf has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ion pair–dispersive liquid–liquid microextraction prior to UV-Vis spectrophotometry for determination of trace amounts of total antimony

    by Zahra Mohammadi, Mahmoud Chamsaz, Narges Ashraf

    Environmental context: This study provides a simple and sensitive method for measuring trace amounts of antimony. This measurement is needed as antimony is known as a toxic element in environmental samples. Antimony is widely distributed in the environment and can come into contact with humans. Here the ultraviolet–visible spectrophotometry is combined with dispersive liquid–liquid microextraction. The approach can help monitor antimony pollution and protect environmental and human health. Rationale: Trace antimony (Sb) has environmental and health risks, so sensitive and selective analytical methods for its determination in diverse samples is a necessity. Existing techniques often require complex procedures or expensive instrumentation, highlighting the need for a simple, efficient and cost-effective method. Methodology: A novel ion pair–dispersive liquid–liquid microextraction (IP-DLLME) procedure was developed. SbIII was oxidised to SbV in hydrochloric acid (HCl) using potassium permanganate (KMnO4) to form the extractable hexachloroantimonate ion (SbCl6−). The ion-pair with methyl violet was subsequently extracted into chlorobenzene. Key parameters, including solvent type and volume, methyl violet concentration, acid concentration, extraction time and ionic strength, were systematically optimised. Results: Under optimised conditions, the method exhibited a linear calibration range of 5–300 ng mL−1, with a limit of detection of 4.1 ng mL−1, a limit of quantification of 12.3 ng mL−1 and an enrichment factor of 270. Recovery studies demonstrated good tolerance toward common coexisting ions. The method was successfully applied to natural water, bottled orange juice, kohl and safety match samples. Discussion: The proposed IP-DLLME method provides a practical, selective and sensitive approach for routine determination of trace Sb in environmental and consumer products. Its simplicity, high enrichment factor and minimal reagent consumption make it suitable for widespread application. Future studies may focus on extending this approach to detect other toxic metal ions and coupling with alternative detection techniques such as ion pair chromatography and ion selective electrodes.


  • β-Cyclodextrin capped gold nanoparticles and nanodiamond assembled on a porous gold mini-chip as a disposable electrochemical sensor for bisphenol A

    by Nastaran Farrahi, Narges Ashraf, Mohammad Hossein Arbab-Zavar

    Herein, a disposable electrochemical sensor was constructed from a gold DVD (GDVD) mini-chip modified with pores, β-cyclodextrin capped gold nanoparticles (AuNPs@β-CD), and nanodiamond (ND). For this purpose, the LSV method was employed to deposit a silver film on the surface of the mini-chip. Then, the silver was replaced with gold using galvanic replacement, after which etching of silver by nitric acid and ammonia was accomplished to obtain a porous GDVD mini-chip (PGDVD). Next, AuNPs@β-CD and thereafter, an aqueous ND dispersion were successively drop-cast on the PGDVD. Finally, the as-prepared mini-chip was exposed to air to obtain the PGDVD@AuNps@β-CD@ND mini-chip. The electrochemical oxidation behaviour of BPA showed an irreversible oxidative wave with decreased oxidation overpotential and increased current response for BPA. The calibration curve was linear over the concentration range of 5 × 10−5 M to 1 × 10−3 M of BPA. According to the 3sb/m and 10sb/m criteria, the limits of detection (LOD) and quantitation (LOQ) of the method were obtained to be 1 × 10−5 M and 5 × 10−5 M, respectively. Also, the reproducibility of the method (RSD%) was obtained to be 4%. The proposed sensor was employed for the analysis of spiked tap water and apple juice samples.


  • Open Access

    In situelectrochemical activation as a generic strategy for promoting the electrocatalytic hydrogen evolution reaction and alcohol electro-oxidation in alkaline medium

    by Alireza Kardan, Narges Ashraf, Zeynab Dabirifar, Sara Khadempir

    In situ electrochemical activation as a new pre-treatment method is extremely effective for enhanced electrocatalytic performances for different applications. With the help of this method, in situ surface modification of electrocatalyst is achieved without using pre-made seeds or complex synthesis procedure. Herein, with the purpose of finding an in situ and simple electrochemical activation protocol, the green synthesis of Au/Pd nanoparticles (AuPd) by means of polyoxometalate (POM) is reported. Structural analysis of the AuPd nanohybrid unveil the Au-core/Pd-shell structure which surrounded by POM. We propose a novel cathodic electrochemical activation in phosphate buffer solution which can greatly boost the electrocatalytic activity of the as-prepared AuPd and Pd electrocatalyst not only for hydrogen evolution reaction (HER) as a model of electro-reduction, but also for methanol and ethanol electro-oxidation reaction (MOR & EOR). For the HER in 1 M NaOH solution, after the electrochemical activation, the needed potential to drive a geometrical current density of 10 mA cm−2 significantly decreases from – 400 mV vs. the reversible hydrogen electrode (RHE) to −290 mV vs. RHE. For the EOR and MOR, electrochemically activated AuPd realized 3.4- and 2.9- fold increase in mass current density (mA mgPd −1) with respect to the pristine AuPd electrocatalyst, respectively.


  • In situ anodic dissolution–cathodic deposition route for preparation of the Pt–SiW 11 Co/SiW 11 Co–CNP/GC electrode: application as an efficient electrode for the hydrogen evolution reaction

    by Reihaneh Hashemniaye-Torshizi, Narges Ashraf, Mohammad Hossein Arbab-Zavar, Somayeh Dianat

    A novel nanohybrid based on carbon nanoparticles, platinum nanoparticles, and SiW 11 Co polyoxometalate is introduced as an efficient electrocatalyst for the hydrogen evolution reaction (HER).


  • Open Access

    A one-pot route for the synthesis of Au@Pd/PMo12/rGO as a dual functional electrocatalyst for ethanol electro-oxidation and hydrogen evolution reaction

    by Ali Ahmadpour, Sara Khadempir, Narges Ashraf, Scott G. Mitchell, Mahdi H. Ahangari

    Au@Pd/PMo12/rGO nanocomposite was synthesized and used as a dual-functional electrocatalyst for HER and EOR.


  • On-Chip Electrochemical Sensing of Propylparaben as an Endocrine Disruptor Model Using a Disposable Gold Platform Modified with Phosphomolybdate Doped Polypyrrole and Nanodiamond

    by Elaheh Hatami, Narges Ashraf, Mohammad Hossein Arbab-Zavar

    Herein, an electrochemical sensor based on a bilayer composite of phosphomolybdate doped polypyrrole (PPy-PMo12) and nanodiamond (ND) at a disposable gold chip (GCHIP) has been introduced for detection of propylparaben (PP). Electropolymerization was employed for deposition of PPy-PMo12 layer on a pre-casted ND layer at the GCHIP. The morphology and microstructure were characterized using field-emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). Electrochemical behavior of PP at the modified electrode was studied and all the influential parameters were optimized. The calibration curve showed to be linear in the range of 5 to 200 μM of PP. The limits of detection (LOD) and quantification (LOQ) of the method were obtained to be 2.1 and 7.1 μM, respectively. Also, reproducibility of the sensor (RSD%) was 4%. The proposed sensor was employed for detection of PP in unspiked and spiked shampoo samples which yielded recoveries in the range of 93.6–104.4%.


  • Tungsten-inert gas welding electrodes as low-cost, green and pH-universal electrocatalysts for the hydrogen evolution reaction

    by Reihaneh Hashemniaye-Torshizi, Narges Ashraf, Mohammad Hossein Arbab-Zavar, Somayeh Dianat

    Large-scale electrolytic production of hydrogen, as the most important energy carrier, requires low-cost and easily available electrocatalysts. Herein, different tungsten-inert gas (TIG) welding electrodes, namely, pure tungsten (W), zirconiated tungsten (W-Zr), ceriated tungsten (W-Ce) and lanthanated tungsten (W-La) electrodes, are introduced as low-cost, green and pH-universal electrocatalysts for the hydrogen evolution reaction (HER). The morphology, microstructure and composition of these electrodes have been investigated using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX) and elemental mapping techniques. The electrocatalytic activity of the electrodes has been studied under acidic, basic and neutral conditions using linear sweep voltammetry (LSV), open circuit potential (OCP) measurements and electrochemical impedance spectroscopy (EIS) and the values of the onset potential (Eonset), overpotential at 10 mA cm−2 (η10), Tafel slope, OCP and charge transfer resistance (Rct) have been obtained for each electrode. It can be claimed that among all the studied electrodes, the W-La electrode shows the best electrocatalytic performance according to the values of Eonset, η10, OCP, and Rct.


  • Electrochemical generation of palladium volatile species enhanced with Sn( ii ): application for detection of Pd( ii ) by pyrolytic graphite-coated furnace atomic absorption spectrometry

    by Alireza Shams, Narges Ashraf, Mohammad Hossein Arbab-Zavar, Mahboubeh Masrournia

    Herein, a novel sample derivatization and introduction system, based on electrochemical generation of palladium volatile species (PdVS), has been developed for determination of Pd concentration via pyrolytic graphite-coated furnace atomic absorption spectrometry. PdVS were produced in the cathode chamber of a home-made electrochemical vapor generation cell in which a tungsten-inert gas (TIG) welding electrode and Sn(II) served as the cathode and the enhancement reagent, respectively. The produced PdVS were transferred into a pyrolytic graphite-coated furnace by a stream of argon carrier gas where they were trapped and atomized. Plackett–Burman experimental design was used to screen the influential experimental parameters. The effect of significant influential parameters on the method sensitivity was evaluated and optimized. Under optimum operating conditions, the calibration curve for Pd was constructed and shown to be linear in the Pd concentration range of 7.5 to 110 ng L−1. Detection (3sb/m) and quantification (10sb/m) limits of the proposed method were evaluated using 10 blank samples and found to be 2.1 ng L−1 and 7.1 ng L−1, respectively. The relative standard deviation (n = 7, at 50 ng L−1 concentration level) was 5%. The accuracy of the proposed method was checked by analysing two different certified reference materials which yielded the recoveries of 105% and 81% for Pd.


  • Ultra-trace determination of thallium by electrochemical hydride generation using efficient tungsten electrodes followed by in situ trapping on a graphite tube and detection by electrothermal atomic absorption spectrometry

    by Alireza Shams, Narges Ashraf, Mohammad Hossein Arbab-Zavar, Mahboubeh Masrournia

    A novel and extremely efficient cathode material, namely, tungsten-inert gas welding electrode, along with Pd(II) as an enhancement reagent has been introduced for electrochemical hydride generation of thallium (Tl). In situ trapping of the volatile species on a graphite tube along with electrothermal atomic absorption spectrometry was used for preconcentration and detection of Tl in order to provide high sensitivity. The volatile species were transferred to the graphite tube by the flow of argon gas and trapped there for a time period of 170 s. To optimize the performance of the proposed analytical method, effects of several effective experimental parameters, such as the graphite tube modifier, argon gas flow rate, trapping temperature and period, atomization temperature, concentration of the catholyte, and also electrolysis duration were investigated and discussed. Under optimum operating conditions, the calibration curve was plotted which was linear in the concentration range of 28 to 300 ng L−1 of Tl. The limit of detection (LOD) and the limit of quantification (LOQ) of the method were obtained to be 8 ng L−1 and 28 ng L−1, based on 3sb/m and 10sb/m criteria, respectively. The relative standard deviation (RSD%) of the method was found to be 2% for seven replicate measurements at a concentration level of 150 ng L−1 of Tl. The effects of several potential chemical interferents were studied and discussed. The accuracy and the analytical applicability of the proposed method were checked through the analysis of commercial certified reference materials, namely, contaminated unalloyed zinc (ERM®-EB325) and also drinking water containing trace metals (CRM-TMDW). As this method was insensitive towards the oxidation state of Tl, it is suitable for the determination of the total Tl in real analytical samples.


  • A potential-gated molecularly imprinted smart electrode for nicotinamide analysis

    by Najmeh Karimian, Mohammad Hossein Arbab Zavar, Mahmoud Chamsaz, Narges Ashraf, Anthony Turner, Ashutosh Tiwari

    Triggered surface responsiveness paves the way for smart sensor technologies that not only have tunable retention, but also provide sensing through a ‘built-in’ programming of electrode material. In this study, we report a potential-gated electrochemical sensor for determination of nicotinamide (NAM) based on a molecularly imprinted overoxidised polypyrrole electrode. The sensitive layer was prepared by electropolymerisation of pyrrole on a glassy carbon electrode in the presence of NAM as a template molecule, followed by alkali extraction. Electrochemical methods were used to monitor the processes of electropolymerisation, template removal and binding in the presence of a [Fe(CN)6]3−/[Fe(CN)6]4− redox couple as an electrochemical probe. Several factors affecting the performance of the MIP-modified electrode were investigated and optimized. The peak current of the ferro/ferricyanide couple decreased linearly with successive addition of NAM in the concentration range 0.9 × 10−6 to 9.9 × 10−3 M with a detection limit of 1.7 × 10−7 M (S/N = 3). The molecularly-imprinted polymer (MIP) electrode had excellent recognition capability for NAM compared to structurally related molecules. Moreover, the reproducibility and repeatability of the NAM-imprinted electrode were all found to be satisfactory. The results from sample analysis confirmed the applicability of the NAM-imprinted electrode to reusable quantitative analysis in commercial pharmaceutical samples.