Artem Nikulin
Research Subjects
Artem Nikulin has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Vitaliy P. Zhelezny
Одеський національний технологічний університет, вул. Канатна, 112, Одеса, 65039, Україна
8 shared publications Elena Palomo del Barrio
6 shared publications- Olga Khliyeva
Odessa National Academy of Food Technologies Kanatna str., 112, Odessa, Ukraine, 65036
6 shared publications - António Luís Nobre Moreira
IN+ Center for Innovation, Technology and Policy Research, Instituto Superior Técnico, Universidade de Lisboa, Avenida Rovisco Pais, 1049-001 Lisboa, Portugal
5 shared publications N. Lukianov
Institute of Refrigeration, Cryotechnologies and Ecoenergetics, Odessa National Academy of Food Technologies, Odessa, Ukraine
4 shared publications- Yury Semenyuk
Odessa National Academy of Food Technologies Kanatna str., 112, Odessa, Ukraine, 65039
4 shared publications
Latest Publications
- Open Access
- 12 July 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (29) , 26136-26146
Jet-Injection In Situ Production of PVDF/PCM Composite Fibers for Thermal Management
Thermal management protects against external agents and increases the lifetime and performance of the devices in which it is implemented. Because of their ability to store and release a high amount of energy at a nearly constant temperature, phase change materials (PCMs) are promising thermoregulatory materials. Thus, the manufacture of PVDF fibers containing PCMs has advantages since PVDF is already used in elements that are susceptible to thermal management as a binder in batteries or as a base material for fabrics. This work presents a simple, versatile, in situ, cost-effective, and easy-to-scale-up method to produce PVDF-based fibers containing paraffin RT-28HC for thermal management. To achieve that goal, the microfluidic approach of coaxial flows was simplified to gravity-aided laminar jet injection into a bulk fluid, where fibers were produced by the solvent extraction mechanism. With this methodology, hollow PVDF fibers and core-shell PVDF fibers containing paraffin RT-28HC have been produced. The proposed approach resulted in fibers with up to 98 J/g of latent heat, with a hierarchical porous structure. SEM study of the fiber morphology has shown that PCM is in the form of slugs along the fibers. Such PCM distribution is maintained until the first melting cycle, when molten PCM spreads within the fiber under capillary forces, which was observed by an infrared camera. Manufactured composite fibers have shown low thermal conductivity and high elasticity, which suggest their potential application as a thermal insulation material with thermal buffer properties. Leakage tests revealed outstanding retention capacity with only 3.5% mass loss after 1000 melting/crystallization cycles. Finally, tensile tests were carried out to evaluate the mechanical properties of the fibers before and after thermal cycling.
- 12 July 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (29) , 26136-26146
Open AccessJet-Injection In Situ Production of PVDF/PCM Composite Fibers for Thermal Management
Thermal management protects against external agents and increases the lifetime and performance of the devices in which it is implemented. Because of their ability to store and release a high amount of energy at a nearly constant temperature, phase change materials (PCMs) are promising thermoregulatory materials. Thus, the manufacture of PVDF fibers containing PCMs has advantages since PVDF is already used in elements that are susceptible to thermal management as a binder in batteries or as a base material for fabrics. This work presents a simple, versatile, in situ, cost-effective, and easy-to-scale-up method to produce PVDF-based fibers containing paraffin RT-28HC for thermal management. To achieve that goal, the microfluidic approach of coaxial flows was simplified to gravity-aided laminar jet injection into a bulk fluid, where fibers were produced by the solvent extraction mechanism. With this methodology, hollow PVDF fibers and core-shell PVDF fibers containing paraffin RT-28HC have been produced. The proposed approach resulted in fibers with up to 98 J/g of latent heat, with a hierarchical porous structure. SEM study of the fiber morphology has shown that PCM is in the form of slugs along the fibers. Such PCM distribution is maintained until the first melting cycle, when molten PCM spreads within the fiber under capillary forces, which was observed by an infrared camera. Manufactured composite fibers have shown low thermal conductivity and high elasticity, which suggest their potential application as a thermal insulation material with thermal buffer properties. Leakage tests revealed outstanding retention capacity with only 3.5% mass loss after 1000 melting/crystallization cycles. Finally, tensile tests were carried out to evaluate the mechanical properties of the fibers before and after thermal cycling.
- Open Access
Physical dealloying for two-phase heat transfer applications: pool boiling case
In this work, physical dealloying was explored as a simple and green method to microstructure the surface of commercial brass for pool boiling heat transfer coefficient enhancement. Three samples were dealloyed for 0.5, 1 and 3 hours at 650 C, turning the smooth surface into a porous one with a depth of 175, 200 and 223 um. The boiling experiments carried out in ethanol at 78 C have shown, that the maximum enhancement of heat transfer coefficient between 110 and 150% was achieved for the sample dealloyed for 0.5 h. Longer intervals of dealloying reduce boiling performance, but it is still much higher compared to smooth brass. This simple method can be customized for various thermal management equipment, such as conventional, plate and micro heat exchangers, all types of heat pipes, HVAC equipment etc., where the heat transfer occurs with phase change.
Open AccessPhysical dealloying for two-phase heat transfer applications: pool boiling case
In this work, physical dealloying was explored as a simple and green method to microstructure the surface of commercial brass for pool boiling heat transfer coefficient enhancement. Three samples were dealloyed for 0.5, 1 and 3 hours at 650 C, turning the smooth surface into a porous one with a depth of 175, 200 and 223 um. The boiling experiments carried out in ethanol at 78 C have shown, that the maximum enhancement of heat transfer coefficient between 110 and 150% was achieved for the sample dealloyed for 0.5 h. Longer intervals of dealloying reduce boiling performance, but it is still much higher compared to smooth brass. This simple method can be customized for various thermal management equipment, such as conventional, plate and micro heat exchangers, all types of heat pipes, HVAC equipment etc., where the heat transfer occurs with phase change.
- Open Access
- 20 May 2023
- Published by Elsevier in Applied Surface Science
- Vol. 632
Fabrication of superhydrophobic metallic porous surfaces via CO2 and water processing
- 20 May 2023
- Published by Elsevier in Applied Surface Science
- Vol. 632
Open AccessFabrication of superhydrophobic metallic porous surfaces via CO2 and water processing
- Open Access
Experimental Investigations on Electric-Field-Induced Crystallization in Erythritol
The objective of this experimental study was to develop a method to induce crystallization of sugar alcohols using an electric field for its future implementation in latent heat thermal energy storage systems. To better understand the mechanisms behind this approach, the first step of this work was dedicated to the replication, continuation, and consolidation of promising results on erythritol reported by another research group. In the second step, a second experimental configuration, previously used to electrically control the supercooling of other phase change materials, was tested with the same sugar alcohol. For both configurations, the influence of the type of current (DC and AC at different frequencies), its amplitude, and time of exposure were studied. However, none of these tests allowed influencing the crystallization of erythritol. Even if surprising at first glance, the difficulty in reproducing experiments and interpreting the results is not new in the field of electric-field-induced crystallization, as shown in particular by the abundant literature reviews concerning water. Currently, to the best of our knowledge, we consider that electric fields could be an attractive option to initiate and accelerate the crystallization of erythritol, but this solution must be considered with caution.
Open AccessExperimental Investigations on Electric-Field-Induced Crystallization in Erythritol
The objective of this experimental study was to develop a method to induce crystallization of sugar alcohols using an electric field for its future implementation in latent heat thermal energy storage systems. To better understand the mechanisms behind this approach, the first step of this work was dedicated to the replication, continuation, and consolidation of promising results on erythritol reported by another research group. In the second step, a second experimental configuration, previously used to electrically control the supercooling of other phase change materials, was tested with the same sugar alcohol. For both configurations, the influence of the type of current (DC and AC at different frequencies), its amplitude, and time of exposure were studied. However, none of these tests allowed influencing the crystallization of erythritol. Even if surprising at first glance, the difficulty in reproducing experiments and interpreting the results is not new in the field of electric-field-induced crystallization, as shown in particular by the abundant literature reviews concerning water. Currently, to the best of our knowledge, we consider that electric fields could be an attractive option to initiate and accelerate the crystallization of erythritol, but this solution must be considered with caution.
- 1 July 2020
- Published by Elsevier in Experimental Thermal and Fluid Science
- Vol. 115
Effect of pattern geometry on bubble dynamics and heat transfer on biphilic surfaces
- 1 July 2020
- Published by Elsevier in Experimental Thermal and Fluid Science
- Vol. 115
Effect of pattern geometry on bubble dynamics and heat transfer on biphilic surfaces
- 1 October 2019
- Published by Elsevier in International Journal of Refrigeration
- Vol. 106, 153-162
Тhermodynamic properties of isobutane/mineral compressor oil and isobutane/mineral compressor oil/fullerenes C60 solutions
- 1 October 2019
- Published by Elsevier in International Journal of Refrigeration
- Vol. 106, 153-162
Тhermodynamic properties of isobutane/mineral compressor oil and isobutane/mineral compressor oil/fullerenes C60 solutions
- 1 September 2019
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 140, 940-955
Experimental investigation on heat transfer and pressure drop of internal flow in corrugated tubes
- 1 September 2019
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 140, 940-955
Experimental investigation on heat transfer and pressure drop of internal flow in corrugated tubes