Shaocheng Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shaocheng Ma has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
- En Lin Goh
Oxford Trauma and Emergency Care, Nuffield Department of Orthopaedics, Rheumatology and Musculoskeletal Sciences, University of Oxford, Oxford, UK
6 shared publications - Justin Peter Cobb
MSK Lab, Imperial College London, London, UK
3 shared publications - Oliver Boughton
Department of Orthopaedic Surgery, Children’s Health Ireland At Crumlin, Dublin, Ireland
2 shared publications - Sarah Zhao
The Abdominal Wall Unit, Croydon University Hospital
2 shared publications Swathikan Chidambaram
Oxford University Clinical Academic Graduate School, Medical Sciences Division, University of Oxford , Oxford, UK
2 shared publicationsUlrich Hansen
The Biomechanics Group, Department of Mechanical Engineering, Imperial College London, South Kensington Campus, London, United Kingdom
2 shared publications
Latest Publications
- Open Access
- 1 August 2019
- Published by Taylor & Francis in Orthopedic Research and Reviews
- Vol. ume 11, 79-92
The role of joint distraction in the treatment of knee osteoarthritis: a systematic review and quantitative analysis
Knee osteoarthritis is a major cause of pain and disability for which joint distraction is a potential treatment to delay the need for knee arthroplasty. This systematic review aims to assess the short- and long-term clinical and structural outcomes following knee joint distraction (KJD). MEDLINE, EMBASE, Scopus, and Web of Science databases were searched from the date of inception to 26th June 2019. Clinical studies investigating joint distraction for knee osteoarthritis with outcomes including ∆WOMAC index, ∆VAS pain score, and ∆joint space width were included. The review protocol was registered with the International Prospective Register of Systematic Reviews (PROSPERO) - CRD42018087032. Nine studies comprising a total of 507 patients were included. There were four randomized controlled trials (RCTs), five open prospective cohort studies, and one case series. Overall, there were significant improvements in WOMAC index, VAS pain score and joint space width following KJD, which persisted up to 9 years. KJD also demonstrated comparable clinical outcomes with high tibial osteotomy and total knee arthroplasty. There is moderate quality evidence supporting the beneficial outcomes of joint distraction for knee osteoarthritis. Larger RCTs with longer follow-up (>1 year) are necessary to establish the true effect size of this procedure.
- 1 August 2019
- Published by Taylor & Francis in Orthopedic Research and Reviews
- Vol. ume 11, 79-92
Open AccessThe role of joint distraction in the treatment of knee osteoarthritis: a systematic review and quantitative analysis
Knee osteoarthritis is a major cause of pain and disability for which joint distraction is a potential treatment to delay the need for knee arthroplasty. This systematic review aims to assess the short- and long-term clinical and structural outcomes following knee joint distraction (KJD). MEDLINE, EMBASE, Scopus, and Web of Science databases were searched from the date of inception to 26th June 2019. Clinical studies investigating joint distraction for knee osteoarthritis with outcomes including ∆WOMAC index, ∆VAS pain score, and ∆joint space width were included. The review protocol was registered with the International Prospective Register of Systematic Reviews (PROSPERO) - CRD42018087032. Nine studies comprising a total of 507 patients were included. There were four randomized controlled trials (RCTs), five open prospective cohort studies, and one case series. Overall, there were significant improvements in WOMAC index, VAS pain score and joint space width following KJD, which persisted up to 9 years. KJD also demonstrated comparable clinical outcomes with high tibial osteotomy and total knee arthroplasty. There is moderate quality evidence supporting the beneficial outcomes of joint distraction for knee osteoarthritis. Larger RCTs with longer follow-up (>1 year) are necessary to establish the true effect size of this procedure.
- Open Access
- 15 October 2018
- Published by Springer Nature in Systematic Reviews
- Vol. 7 (1) , 162
Joint distraction for knee osteoarthritis: protocol for a systematic review and meta-analysis
Osteoarthritis is a degenerative joint disease that is highly prevalent worldwide. Knee osteoarthritis is the most common form of osteoarthritis and is a major cause of pain and disability. However, there remains a lack of treatments available that have demonstrated effectiveness in stopping or reversing the degenerative process. Joint distraction has emerged as a viable alternative in the treatment of knee osteoarthritis to delay the need for knee arthroplasty. An electronic search will be conducted on MEDLINE, EMBASE, Web of Science, CINAHL, Cochrane and EBSCO databases. Clinical studies investigating joint distraction for knee osteoarthritis, which reported clinical or structural outcomes including ∆WOMAC index, ∆VAS pain score and ∆joint space width will be included. Risk of bias will be assessed using the Newcastle-Ottawa Scale for observational studies and Cochrane Collaboration tool for randomised controlled trials. Quality of studies will be assessed using the modified Coleman methodology score. This systematic review will summarise the short- and long-term clinical and structural outcomes following joint distraction for knee osteoarthritis. The findings from this review will establish the quality of currently available evidence, which will determine the need for further studies to establish the true effect size of this procedure. PROSPERO CRD42018087032
- 15 October 2018
- Published by Springer Nature in Systematic Reviews
- Vol. 7 (1) , 162
Open AccessJoint distraction for knee osteoarthritis: protocol for a systematic review and meta-analysis
Osteoarthritis is a degenerative joint disease that is highly prevalent worldwide. Knee osteoarthritis is the most common form of osteoarthritis and is a major cause of pain and disability. However, there remains a lack of treatments available that have demonstrated effectiveness in stopping or reversing the degenerative process. Joint distraction has emerged as a viable alternative in the treatment of knee osteoarthritis to delay the need for knee arthroplasty. An electronic search will be conducted on MEDLINE, EMBASE, Web of Science, CINAHL, Cochrane and EBSCO databases. Clinical studies investigating joint distraction for knee osteoarthritis, which reported clinical or structural outcomes including ∆WOMAC index, ∆VAS pain score and ∆joint space width will be included. Risk of bias will be assessed using the Newcastle-Ottawa Scale for observational studies and Cochrane Collaboration tool for randomised controlled trials. Quality of studies will be assessed using the modified Coleman methodology score. This systematic review will summarise the short- and long-term clinical and structural outcomes following joint distraction for knee osteoarthritis. The findings from this review will establish the quality of currently available evidence, which will determine the need for further studies to establish the true effect size of this procedure. PROSPERO CRD42018087032
- Open Access
- 1 October 2018
- Published by Taylor & Francis in Open Access Rheumatology: Research and Reviews
- Vol. ume 10, 135-140
Novel treatments for osteoarthritis: a recent update
Osteoarthritis is the most prevalent chronic joint condition worldwide. The principles of osteoarthritis treatment are to alleviate pain and stiffness as well as maintain function, with current consensus guidelines recommending the use of a combination of conservative measures including physical therapy, analgesia, and surgical interventions such as arthroplasty. In recent years, several pharmacological therapies have emerged as potential alternatives. Although a disease-modifying osteoarthritis drug has yet to be identified, promising results have been reported in recent trials especially with serotonin–norepinephrine reuptake inhibitors, IL-1 antagonists, and antibodies to nerve growth factor. The present review aims to summarize and discuss the latest results of novel treatments for osteoarthritis and potential targets for future research.
- 1 October 2018
- Published by Taylor & Francis in Open Access Rheumatology: Research and Reviews
- Vol. ume 10, 135-140
Open AccessNovel treatments for osteoarthritis: a recent update
Osteoarthritis is the most prevalent chronic joint condition worldwide. The principles of osteoarthritis treatment are to alleviate pain and stiffness as well as maintain function, with current consensus guidelines recommending the use of a combination of conservative measures including physical therapy, analgesia, and surgical interventions such as arthroplasty. In recent years, several pharmacological therapies have emerged as potential alternatives. Although a disease-modifying osteoarthritis drug has yet to be identified, promising results have been reported in recent trials especially with serotonin–norepinephrine reuptake inhibitors, IL-1 antagonists, and antibodies to nerve growth factor. The present review aims to summarize and discuss the latest results of novel treatments for osteoarthritis and potential targets for future research.
- Open Access
Icariin induces MC3T3-E1 cell proliferation and differentiation via the BMP-2/Smads/Runx2 signal pathway
Icariin, the main active ingredient of Epimedium, has played an important role in bone anabolism. However, the molecular mechanism for this effect was not convincingly reported yet. In this paper, the role of icariin on cell morphology, viability, cell cycling and the activity of alkaline phosphatase (ALP) were studied, and the molecular mechanism of icariin induced osteogenic effect was also investigated. Icariin with different concentrations (10, 20 and 40 ng/ml) was used to modify the pre-osteoblastic MC3T3-E1 cells for 48, 72 and 96 h, and the proliferation, morphology, and the cell cycle of the cells were evaluated by Cell Counting Kit-8 (CCK-8), microscopy and flow cytometry, respectively. Bone morphogenic protein-2 (BMP-2), bone morphogenic protein receptor-2 (BMPR-2), Smad4, Smadl/5/8 proteins expression levels were obtained by Western blotting and the expression levels of runt-related transcription factor 2 (Runx2) mRNA was examined by reverse transcription-polymerase chain reaction (RT-PCR). In this study, we found that icariin could promote the proliferation and differentiation of MC3T3-E1 cells in a dose - and time-dependent manner. Icariin could stimulate the expression of the BMP-2, BMPR-2, Smad4 and Smadl/5/8 proteins. Furthermore, icariin could upregulate the expression of Runx2 mRNA. These results showed that icariin played an important role in upregulating BMP-2 expression to activate the BMP-2/Smads/Runx2 signal pathway for increasing both the proliferation and differentiation of the MC3T3-E1 cells. However, the osteogenic effects of icariin can be suppressed by the BMP-2 antagonist (Noggin). In conclusion, we demonstrate that icariin is an osteoinductive factor that exerts its osteogenic effect by regulating the BMP-2/Smads/Runx2 signal pathway in MC3T3-E1 cells.
Open AccessIcariin induces MC3T3-E1 cell proliferation and differentiation via the BMP-2/Smads/Runx2 signal pathway
Icariin, the main active ingredient of Epimedium, has played an important role in bone anabolism. However, the molecular mechanism for this effect was not convincingly reported yet. In this paper, the role of icariin on cell morphology, viability, cell cycling and the activity of alkaline phosphatase (ALP) were studied, and the molecular mechanism of icariin induced osteogenic effect was also investigated. Icariin with different concentrations (10, 20 and 40 ng/ml) was used to modify the pre-osteoblastic MC3T3-E1 cells for 48, 72 and 96 h, and the proliferation, morphology, and the cell cycle of the cells were evaluated by Cell Counting Kit-8 (CCK-8), microscopy and flow cytometry, respectively. Bone morphogenic protein-2 (BMP-2), bone morphogenic protein receptor-2 (BMPR-2), Smad4, Smadl/5/8 proteins expression levels were obtained by Western blotting and the expression levels of runt-related transcription factor 2 (Runx2) mRNA was examined by reverse transcription-polymerase chain reaction (RT-PCR). In this study, we found that icariin could promote the proliferation and differentiation of MC3T3-E1 cells in a dose - and time-dependent manner. Icariin could stimulate the expression of the BMP-2, BMPR-2, Smad4 and Smadl/5/8 proteins. Furthermore, icariin could upregulate the expression of Runx2 mRNA. These results showed that icariin played an important role in upregulating BMP-2 expression to activate the BMP-2/Smads/Runx2 signal pathway for increasing both the proliferation and differentiation of the MC3T3-E1 cells. However, the osteogenic effects of icariin can be suppressed by the BMP-2 antagonist (Noggin). In conclusion, we demonstrate that icariin is an osteoinductive factor that exerts its osteogenic effect by regulating the BMP-2/Smads/Runx2 signal pathway in MC3T3-E1 cells.
- Open Access
- 12 July 2018
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 13 (7) , e0200475
Measuring bone stiffness using spherical indentation
Bone material properties are a major determinant of bone health in older age, both in terms of fracture risk and implant fixation, in orthopaedics and dentistry. Bone is an anisotropic and hierarchical material so its measured material properties depend upon the scale of metric used. The scale used should reflect the clinical problem, whether it is fracture risk, a whole bone problem, or implant stability, at the millimetre-scale. Indentation, an engineering technique involving pressing a hard-tipped material into another material with a known force, may be able to assess bone stiffness at the millimetre-scale (the apparent elastic modulus). We aimed to investigate whether spherical-tip indentation could reliably measure the apparent elastic modulus of human cortical bone. Cortical bone samples were retrieved from the femoral necks of nineteen patients undergoing total hip replacement surgery (10 females, 9 males, mean age: 69 years). The samples underwent indentation using a 1.5 mm diameter, ruby, spherical indenter tip, with sixty indentations per patient sample, across six locations on the bone surfaces, with ten repeated indentations at each of the six locations. The samples then underwent mechanical compression testing. The repeatability of indentation measurements of elastic modulus was assessed using the co-efficient of repeatability and the correlation between the bone elastic modulus measured by indentation and compression testing was analysed by least-squares regression. In total, 1140 indentations in total were performed. Indentation was found to be repeatable for indentations performed at the same locations on the bone samples with a mean co-efficient of repeatability of 0.4 GigaPascals (GPa), confidence interval (C.I): 0.33–0.42 GPa. There was variation in the indentation modulus results between different locations on the bone samples (mean co-efficient of repeatability: 3.1 GPa, C.I: 2.2–3.90 GPa). No clear correlation was observed between indentation and compression values of bone elastic modulus (r = 0.33, p = 0.17). The mean apparent elastic modulus obtained by spherical indentation was 9.9 GPa, the standard deviation for each indent cycle was 0.11 GPa, and the standard deviation between locations on the same sample was 1.01 GPa. The mean compression apparent elastic modulus was 4.42 GPa, standard deviation 1.02 GPa. Spherical-tip indentation was found to be a repeatable test for measuring the elastic modulus of human cortical bone, demonstrated by a low co-efficient of repeatability in this study. It could not, however, reliably predict cortical bone elastic modulus determined by platens compression testing in this study. This may be due to indentation only probing mechanical properties at the micro-scale while platens compression testing assesses millimetre length-scale properties. Improvements to the testing technique, including the use of a larger diameter spherical indenter tip, may improve the measurement of bone stiffness at the millimetre scale and should be investigated further.
- 12 July 2018
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 13 (7) , e0200475
Open AccessMeasuring bone stiffness using spherical indentation
Bone material properties are a major determinant of bone health in older age, both in terms of fracture risk and implant fixation, in orthopaedics and dentistry. Bone is an anisotropic and hierarchical material so its measured material properties depend upon the scale of metric used. The scale used should reflect the clinical problem, whether it is fracture risk, a whole bone problem, or implant stability, at the millimetre-scale. Indentation, an engineering technique involving pressing a hard-tipped material into another material with a known force, may be able to assess bone stiffness at the millimetre-scale (the apparent elastic modulus). We aimed to investigate whether spherical-tip indentation could reliably measure the apparent elastic modulus of human cortical bone. Cortical bone samples were retrieved from the femoral necks of nineteen patients undergoing total hip replacement surgery (10 females, 9 males, mean age: 69 years). The samples underwent indentation using a 1.5 mm diameter, ruby, spherical indenter tip, with sixty indentations per patient sample, across six locations on the bone surfaces, with ten repeated indentations at each of the six locations. The samples then underwent mechanical compression testing. The repeatability of indentation measurements of elastic modulus was assessed using the co-efficient of repeatability and the correlation between the bone elastic modulus measured by indentation and compression testing was analysed by least-squares regression. In total, 1140 indentations in total were performed. Indentation was found to be repeatable for indentations performed at the same locations on the bone samples with a mean co-efficient of repeatability of 0.4 GigaPascals (GPa), confidence interval (C.I): 0.33–0.42 GPa. There was variation in the indentation modulus results between different locations on the bone samples (mean co-efficient of repeatability: 3.1 GPa, C.I: 2.2–3.90 GPa). No clear correlation was observed between indentation and compression values of bone elastic modulus (r = 0.33, p = 0.17). The mean apparent elastic modulus obtained by spherical indentation was 9.9 GPa, the standard deviation for each indent cycle was 0.11 GPa, and the standard deviation between locations on the same sample was 1.01 GPa. The mean compression apparent elastic modulus was 4.42 GPa, standard deviation 1.02 GPa. Spherical-tip indentation was found to be a repeatable test for measuring the elastic modulus of human cortical bone, demonstrated by a low co-efficient of repeatability in this study. It could not, however, reliably predict cortical bone elastic modulus determined by platens compression testing in this study. This may be due to indentation only probing mechanical properties at the micro-scale while platens compression testing assesses millimetre length-scale properties. Improvements to the testing technique, including the use of a larger diameter spherical indenter tip, may improve the measurement of bone stiffness at the millimetre scale and should be investigated further.
- 1 February 2018
- Published by Wolters Kluwer Health in International Journal of Surgery
- Vol. 50, 35-42
Laparoscopic vs open hepatectomy for hepatocellular carcinoma in patients with cirrhosis: A meta-analysis of the long-term survival outcomes
In patients with hepatocellular carcinoma (HCC) and cirrhosis, laparoscopic hepatectomy (LH) confers short-term benefits over open hepatectomy (OH) but the long-term outcomes of this procedure are unclear. This systematic review aims to compare the long-term survival outcomes of LH and OH for patients with HCC and underlying cirrhosis. EMBASE, MEDLINE and Scopus databases were searched from date of inception to 7th October 2016. Controlled clinical studies comparing LH to OH for HCC in cirrhotic patients, which reported long-term overall and disease-free survival were included. The studies were evaluated using the MOOSE guidelines and Newcastle-Ottawa Scale. Data were extracted and analysed using a fixed-effects model. Five non-randomised, retrospective observational studies representing 888 patients were included. LH was associated with significantly lower tumour recurrence [OR: 0.65, 95% CI: 0.48, 0.89]. LH conferred greater overall survival at 1- [HR: 0.41, 95% CI: 0.25, 0.68], 3- [HR: 0.63, 95% CI: 0.46, 0.87] and 5-years [HR: 0.60, 95% CI: 0.45, 0.80]. With LH, there was higher disease-free survival at 1-year [HR: 0.71, 95% CI: 0.53, 0.96], but not at 3- [HR: 0.89, 95% CI: 0.70, 1.14]; and 5-years [HR: 0.85, 95% CI: 0.70, 1.04]. Laparoscopic surgery is associated with comparable postoperative and survival outcomes in patients with HCC and underlying cirrhosis. With careful selection of patients, this approach is safe, feasible and advantageous.
- 1 February 2018
- Published by Wolters Kluwer Health in International Journal of Surgery
- Vol. 50, 35-42
Laparoscopic vs open hepatectomy for hepatocellular carcinoma in patients with cirrhosis: A meta-analysis of the long-term survival outcomes
In patients with hepatocellular carcinoma (HCC) and cirrhosis, laparoscopic hepatectomy (LH) confers short-term benefits over open hepatectomy (OH) but the long-term outcomes of this procedure are unclear. This systematic review aims to compare the long-term survival outcomes of LH and OH for patients with HCC and underlying cirrhosis. EMBASE, MEDLINE and Scopus databases were searched from date of inception to 7th October 2016. Controlled clinical studies comparing LH to OH for HCC in cirrhotic patients, which reported long-term overall and disease-free survival were included. The studies were evaluated using the MOOSE guidelines and Newcastle-Ottawa Scale. Data were extracted and analysed using a fixed-effects model. Five non-randomised, retrospective observational studies representing 888 patients were included. LH was associated with significantly lower tumour recurrence [OR: 0.65, 95% CI: 0.48, 0.89]. LH conferred greater overall survival at 1- [HR: 0.41, 95% CI: 0.25, 0.68], 3- [HR: 0.63, 95% CI: 0.46, 0.87] and 5-years [HR: 0.60, 95% CI: 0.45, 0.80]. With LH, there was higher disease-free survival at 1-year [HR: 0.71, 95% CI: 0.53, 0.96], but not at 3- [HR: 0.89, 95% CI: 0.70, 1.14]; and 5-years [HR: 0.85, 95% CI: 0.70, 1.04]. Laparoscopic surgery is associated with comparable postoperative and survival outcomes in patients with HCC and underlying cirrhosis. With careful selection of patients, this approach is safe, feasible and advantageous.
- Open Access
- 1 September 2017
- Published by British Editorial Society of Bone & Joint Surgery in Bone & Joint Research
- Vol. 6 (9) , 542-549
Microindentation – a tool for measuring cortical bone stiffness?
Objectives Microindentation has the potential to measure the stiffness of an individual patient’s bone. Bone stiffness plays a crucial role in the press-fit stability of orthopaedic implants. Arming surgeons with accurate bone stiffness information may reduce surgical complications including periprosthetic fractures. The question addressed with this systematic review is whether microindentation can accurately measure cortical bone stiffness. Methods A systematic review of all English language articles using a keyword search was undertaken using Medline, Embase, PubMed, Scopus and Cochrane databases. Studies that only used nanoindentation, cancellous bone or animal tissue were excluded. Results A total of 1094 abstracts were retrieved and 32 papers were included in the analysis, 20 of which used reference point indentation, and 12 of which used traditional depth-sensing indentation. There are several factors that must be considered when using microindentation, such as tip size, depth and method of analysis. Only two studies validated microindentation against traditional mechanical testing techniques. Both studies used reference point indentation (RPI), with one showing that RPI parameters correlate well with mechanical testing, but the other suggested that they do not. Conclusion Microindentation has been used in various studies to assess bone stiffness, but only two studies with conflicting results compared microindentation with traditional mechanical testing techniques. Further research, including more studies comparing microindentation with other mechanical testing methods, is needed before microindentation can be used reliably to calculate cortical bone stiffness. Cite this article: M. Arnold, S. Zhao, S. Ma, F. Giuliani, U. Hansen, J. P. Cobb, R. L. Abel, O. Boughton. Microindentation – a tool for measuring cortical bone stiffness? A systematic review. Bone Joint Res 2017;6:542–549. DOI: 10.1302/2046-3758.69.BJR-2016-0317.R2.
- 1 September 2017
- Published by British Editorial Society of Bone & Joint Surgery in Bone & Joint Research
- Vol. 6 (9) , 542-549
Open AccessMicroindentation – a tool for measuring cortical bone stiffness?
Objectives Microindentation has the potential to measure the stiffness of an individual patient’s bone. Bone stiffness plays a crucial role in the press-fit stability of orthopaedic implants. Arming surgeons with accurate bone stiffness information may reduce surgical complications including periprosthetic fractures. The question addressed with this systematic review is whether microindentation can accurately measure cortical bone stiffness. Methods A systematic review of all English language articles using a keyword search was undertaken using Medline, Embase, PubMed, Scopus and Cochrane databases. Studies that only used nanoindentation, cancellous bone or animal tissue were excluded. Results A total of 1094 abstracts were retrieved and 32 papers were included in the analysis, 20 of which used reference point indentation, and 12 of which used traditional depth-sensing indentation. There are several factors that must be considered when using microindentation, such as tip size, depth and method of analysis. Only two studies validated microindentation against traditional mechanical testing techniques. Both studies used reference point indentation (RPI), with one showing that RPI parameters correlate well with mechanical testing, but the other suggested that they do not. Conclusion Microindentation has been used in various studies to assess bone stiffness, but only two studies with conflicting results compared microindentation with traditional mechanical testing techniques. Further research, including more studies comparing microindentation with other mechanical testing methods, is needed before microindentation can be used reliably to calculate cortical bone stiffness. Cite this article: M. Arnold, S. Zhao, S. Ma, F. Giuliani, U. Hansen, J. P. Cobb, R. L. Abel, O. Boughton. Microindentation – a tool for measuring cortical bone stiffness? A systematic review. Bone Joint Res 2017;6:542–549. DOI: 10.1302/2046-3758.69.BJR-2016-0317.R2.
- Open Access
- 6 March 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , srep43399
Long-term effects of bisphosphonate therapy: perforations, microcracks and mechanical properties
Osteoporosis is characterised by trabecular bone loss resulting from increased osteoclast activation and unbalanced coupling between resorption and formation, which induces a thinning of trabeculae and trabecular perforations. Bisphosphonates are the frontline therapy for osteoporosis, which act by reducing bone remodelling, and are thought to prevent perforations and maintain microstructure. However, bisphosphonates may oversuppress remodelling resulting in accumulation of microcracks. This paper aims to investigate the effect of bisphosphonate treatment on microstructure and mechanical strength. Assessment of microdamage within the trabecular bone core was performed using synchrotron X-ray micro-CT linked to image analysis software. Bone from bisphosphonate-treated fracture patients exhibited fewer perforations but more numerous and larger microcracks than both fracture and non-fracture controls. Furthermore, bisphosphonate-treated bone demonstrated reduced tensile strength and Young’s Modulus. These findings suggest that bisphosphonate therapy is effective at reducing perforations but may also cause microcrack accumulation, leading to a loss of microstructural integrity and consequently, reduced mechanical strength.
- 6 March 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , srep43399
Open AccessLong-term effects of bisphosphonate therapy: perforations, microcracks and mechanical properties
Osteoporosis is characterised by trabecular bone loss resulting from increased osteoclast activation and unbalanced coupling between resorption and formation, which induces a thinning of trabeculae and trabecular perforations. Bisphosphonates are the frontline therapy for osteoporosis, which act by reducing bone remodelling, and are thought to prevent perforations and maintain microstructure. However, bisphosphonates may oversuppress remodelling resulting in accumulation of microcracks. This paper aims to investigate the effect of bisphosphonate treatment on microstructure and mechanical strength. Assessment of microdamage within the trabecular bone core was performed using synchrotron X-ray micro-CT linked to image analysis software. Bone from bisphosphonate-treated fracture patients exhibited fewer perforations but more numerous and larger microcracks than both fracture and non-fracture controls. Furthermore, bisphosphonate-treated bone demonstrated reduced tensile strength and Young’s Modulus. These findings suggest that bisphosphonate therapy is effective at reducing perforations but may also cause microcrack accumulation, leading to a loss of microstructural integrity and consequently, reduced mechanical strength.