JCJason R. Croy

Jason R. Croy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jason R. Croy has a total of 158 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Impact of Cobalt Substitution in Lithiated Spinel/Layered Li 2 (MnNi) 1− δ/2 Co δ O 4 (0 ⩽ δ ⩽ 0.667) Cathodes for Li-Ion Batteries

    by Subhadip Mallick, Jihyeon Gim, Anh D. Vu, Jason R. Croy, Eungje Lee, Michael M. Thackeray

    In 2020, the discovery of the lithiated spinel Li 2 MnNiO 4 opened the door to the design of a new class of cathode materials for the lithium-ion battery industry. This compound is typically prepared in air at 400 °C and co-exists with a disordered layered structure of the same composition (LiMn 0.5 Ni 0.5 O 2 ), delivering most of its capacity (∼200 mAh g −1 ) between 4.8 and 3.0 V with essentially no redox on the manganese ions. This communication reports the effects of cobalt substitution on the structural and electrochemical properties of lithiated-spinel/layered Li 2 (MnNi) 1− δ/2 Co δ O 4 composite electrodes over the compositional range 0 ⩽ δ ⩽ 0.667.

  • Open Access

    Cobalt-Free Lithium and Manganese Rich Cathodes for Electric Vehicle Applications:Influence of Inherent Properties on Temperature-Dependent Performance

    by Chansun Park, Jiajun Chen, Subhadip Mallick, Rajesh Pathak, Jeffrey Elam, Alvaro Masias, Jason R. Croy

    Lithium- and manganese-rich (LMR) oxides are attractive options as next-generation, earth-abundant cathodes. Despite inherent properties that result in less-than-ideal performance, advancements in this class of cathodes toward commercialization have been steady. Herein, we report a benchmark study on the influence these inherent properties exert on the discharge rate of Co-free, LMR//graphite (Gr) cells as a function of temperature. Because low-temperature performance is an essential consideration in the design of electric vehicle cells, understanding the limitations of current LMR systems is essential in understanding their current applicability as well as strategies for improvement. This work identifies two major limitations in the rate performance of LMR//Gr cells and suggests several areas of focus where practical strategies may provide improvements.

  • Open Access

    Quantifying SEI Reaction Rate in the Presence and Absence of Mn 2+

    by Adam Tornheim, Qijia Zhu, Qian Liu, Daniel P. Abraham, Jason R. Croy

    In this work, a methodology utilizing potentiostatic holds is developed for measuring side-reaction rates at graphite (Gr) electrodes. The influence of Mn 2+ on parasitic reactions is evaluated in the presence of various preformed solid-electrolyte interphases (SEI). Gr SEI preformation was carried out using vinylene carbonate (VC) or lithium difluoro(oxalato)borate (LiDFOB) as an additive. In addition, a highly fluorinated electrolyte, free of traditional non-fluorinated organic carbonates, was used. Parasitic current increases were observed for all preformed Gr SEIs when Mn 2+ was present. Of the preforming electrolytes, the VC-derived SEI showed the lowest parasitic currents both with and without Mn 2+ .


  • Open Access

    Defining Electrode-Level Metrics for Enabling Earth-Abundant, Mn-Rich Cathodes: A Technoeconomic Analysis of Experimental Materials

    by Jiajun Chen, Kevin W. Knehr, Marco-Tulio F. Rodrigues, Joseph J. Kubal, Subhadip Mallick, Daniel P. Abraham, Shabbir Ahmed, Stephen E. Trask, Jason R. Croy

    Manganese-rich oxides are attractive options as next-generation, earth-abundant cathodes and significant efforts are being directed toward commercial implementation. We report here an updated techno-economic analysis of the lithium- and manganese-rich (LMR) class of earth-abundant cathodes for electric vehicle applications. BatPaC modeling was used to define the cell-level metrics that must be met for these materials to be cost and energy competitive with the current commercial earth-abundant benchmark, LiFePO 4 , as well as anticipated variations such as LiMn 0.8 Fe 0.2 PO 4 . The model was used to evaluate a high-performance material from the literature and subsequently define R&D targets as the likely limits of practical performance for similar LMR systems. Experimental validation and BatPaC evaluation of an advanced, cobalt-free LMR cell system was also conducted. Results show that the advanced LMR cells come within ∼5% of the defined limits and exceed the energy of LiFe(Mn)PO 4 cells at a similar cost. Excellent cycle-life, low impedance, and low impedance rise were also achieved under the conditions tested and reveal that cobalt is not necessary to achieve high-performance LMR oxides. Although the analysis conducted herein reports on LMR cell systems, the methodology and target values defined for performance metrics easily extend to the evaluation of other systems under consideration as earth-abundant options.


  • Electrode strain dynamics in layered intercalation battery cathodes

    by Tianxiao Sun, Guannan Qian, Ruqing Fang, Guibin Zan, Zhichen Xue, Stephen E. Trask, Arturo Gutierrez, Wenlong Li, Shimao Deng, Luxi Li, et al.

    Rechargeable batteries using electrodes based on intercalation chemistry exhibit notable cyclability, yet their performance still suffers from chemomechanical degradation. In this study, by combining a suite of operando microscopy methods, we explored electrode strain evolution and observed intricate particle cluster rearrangement under electrochemical stimuli. We show that early-stage strain accumulation in intercalation cathodes occurs during the period of interparticle charge transfer and redox reactions stemming from asynchronous coupling and decoupling between chemical (de)intercalation and physical grain motion. This interplay drives heterogeneous redox activity, localized charge equilibration, and multiscale strain cascades that propagate through an asynchronous network of chemical-mechanical interactions. Together, these findings reveal how collective particle dynamics and hierarchical strain transmission dictate electrode deformation and degradation in intercalation cathodes.


  • Open Access

    Cycling Performance and Structure Evolution of Co-Free Lithium- and Manganese-Rich Layered Oxides in Lithium-Ion Batteries

    by Pavan P. Badami, Chun Yuen Kwok, Avi Gargye, Stephen E. Trask, Fulya Dogan, Antonio T. Lopez, Jason R. Croy, M. Balasubramanian, Daniel P. Abraham

    Lithium- and manganese-rich (LMR) layered oxides are high-capacity cathode materials that are being considered for electric vehicle (EV) lithium-ion batteries (LIBs). Here, we investigate the electrochemical cycling behavior of cells containing a cobalt-free LMR oxide, 0.3Li 2 MnO 3 ·0.7LiMn 0.5 Ni 0.5 O 2 , paired with either Li or graphite anodes. Two- and three-electrode cells are cycled under varying conditions to examine the effects of oxide activation, upper cutoff voltage, separator type, and electrolyte composition. Post-cycling characterization of harvested electrodes, with electrochemical, X-ray absorption spectroscopy, and solid-state 6 Li nuclear magnetic resonance spectroscopy techniques, are used to correlate cell performance changes with redox state evolution in the oxide and Li inventory shifts in the cell. Our results show that capacity fade and impedance rise primarily originate at the graphite anode and LMR cathode, respectively. Notably, while Ni undergoes reversible redox, Mn shows no evidence of bulk redox activity even in highly-aged electrodes: only relithiated LMR electrodes show some reduction of Mn. Graphite electrodes degrade due to particle isolation and SEI growth, exacerbated by Mn dissolution and deposition on graphite anodes. These findings highlight the coupled structural and electrochemical degradation mechanisms in LMR/graphite cells and underscore lithium inventory retention and electrode interfacial stability as critical factors for enhancing long-term performance.


  • Open Access

    The Sensitivity of Nickel Substitution in the Structural Design of Manganese-Based Layered and Lithiated Spinel Electrodes for Li-Ion Batteries

    by Subhadip Mallick, Anh D. Vu, Jiajun Chen, Boyu Shi, Jihyeon Gim, Eungje Lee, Jason R. Croy, Michael M. Thackeray

    A concerted effort is being made at Argonne National Laboratory to explore and develop high-performance lithium-manganese-nickel-oxide cathode materials for the lithium battery industry. They are both energy- and cost-competitive relative to cobalt- and nickel-rich systems, such as LiCoO 2 , LiNi 0.8 Co 0.15 Al 0.05 O 2 , and LiNi 0.8 Mn 0.1 Co 0.1 O 2 . The recent discovery of the structural versatility of LiNi 0.5 Mn 0.5 O 2 , has revealed that it can exist in three configurations: lithiated spinel, partially disordered layered, and completely disordered rock salt within a common cubic-close-packed oxygen array. This versatility opens up the possibility of designing structurally integrated electrode components with interlinking 2-D (layered) and 3-D (spinel) channels for Li-ion transport. This paper highlights the sensitivity of Ni substitution and synthesis temperature on the structural and electrochemical properties of LiNi 0.50 Mn 0.50 O 2 , LiNi 0.53 Mn 0.47 O 2 , LiNi 0.47 Mn 0.53 O 2 , and LiNi 0.25 Mn 0.75 O 2 electrodes, as well as a cobalt-containing composition, LiNi 0.333 Mn 0.333 Co 0.333 O 2 , when synthesized at a relatively low temperature of 400 °C.


  • Advancing the Performance of Lithium-Rich Oxides in Cooperation with Inherent Complexities: Engineering Domain Structure

    by Juan C. Garcia, Hakim Iddir, Arturo Gutierrez, Subhadip Mallick, Yulin Lin, Jianguo Wen, Fulya Dogan, Hari Adhikari, Jason R. Croy


  • Open Access

    Mitigating Transition Metal Dissolution from Mn-rich Cathodes: Influence of Processing and Testing Methods

    by Subhadip Mallick, Rajesh Pathak, Maksim Sultanov, Jianguo Wen, Yasuo Ito, Jeffrey W. Elam, Jason R. Croy

    Manganese-rich oxides continue to gain interest with respect to the development of Earth-abundant options for lithium-ion cathodes. Of the unique challenges that hinder the respective performance of various classes of such materials, manganese dissolution still stands as a common theme. The work herein explores Li3PO4 as a robust surface protection layer on a prototypical, Co-free, manganese-rich cathode in the way of a lithium- and manganese-rich oxide. The study highlights the critical importance of synthesis and processing in realizing optimal performance of a given surface treatment by comparing sol-gel and atomic layer deposition methods. Furthermore, cycling protocols are emphasized as a critical factor in adequately gauging the efficacy of surface protection strategies to mitigate manganese dissolution and the subsequent electrochemical consequence. Optimized Li3PO4 coatings coatings on lithium- and manganese-rich cathode particles are shown to greatly mitigate capacity fade, impedance rise, pore/void formation and mechanical damage during long-term cycling.