JSJoshua David Snyder

Joshua David Snyder

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joshua David Snyder has a total of 105 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Vertically orientated one-dimensional titania lepidocrocite quasi nanoflakes for stabilized lithium deposition in lithium metal anodes

    by Neal A. Cardoza, Mary Qin. Hassig, Tran Ngo, Taber Yim, Brianna Markunas, Joshua Snyder, Michel W. Barsoum, Vibha Kalra

    Vertically aligned lepidocrocite TiO 2 hosts promote uniform lithium nucleation and growth though high surface area and intrinsic Li + affinity, enabling homogeneous Li deposition and suppressing dendrite growth in anode-free Li metal batteries.


  • Open Access

    Unveiling the Origin of Morphological Instability in Topologically Complex Electrocatalytic Nanostructures

    by Yawei Li, James L. Hart, Ramchandra Gawas, Zhiyong Xia, Pietro P. Lopes, Jieyu Zhang, Siming Li, Yucheng Wang, Mitra Taheri, Ian McCue, et al.

    Coarsening and degradation phenomena in metals have largely focused on thermally driven processes, such as bulk and surface diffusion. However, dramatic coarsening has been reported in high-surface-area, nanometer-sized Pt-based catalysts during potential cycling in an electrolyte at room temperature─a temperature too low for the process to be explained purely by surface mobility values measured in both vacuum and electrolytes (∼10-22 and ∼10-18 cm2/s, respectively). This morphological evolution must be due to a different mechanism for mass transport that is sensitive to electrochemical conditions (e.g., electrolyte composition, potential limits, and scan rate). However, there have been no notable studies of electrochemically induced coarsening in nanometer-sized electrocatalysts. Here, we unveil the origins of coarsening in an electrolyte through coupled in situ experiments and atomistic kinetic Monte Carlo (kMC) simulations. Our work demonstrates electrochemical coarsening is driven by two concurrent mechanisms that can be explained at the atomistic level: (i) dissolution/redeposition during the reduction of an oxidized species and (ii) rapid surface diffusion of undercoordinated atoms.


  • Insights into the electrochemical hydrogenation of phenol

    by Brianna Markunas, Joshua Snyder

    Thermal chemical hydrogenation (TCH) is a key reaction for upgrading petroleum and biomass feedstocks to value-added fuels and chemicals. TCH requires high operating temperatures and pressures which results in high energy consumption and CO₂ emissions. Electrochemical hydrogenation (ECH) is a mild alternative where applied potential drives the hydrogenation of hydrocarbons with protons sourced from the aqueous electrolyte near ambient conditions. As a renewable energy source, lignocellulose is an abundant yet underutilized feedstock comprised of complex phenolic compounds that can be valorized via ECH. Phenol is a simple model compound for lignocellulose that has been the focus of recent ECH studies. The added complexity of aqueous organic electrochemical systems from the electrolyte and applied potential requires a fundamental understanding of these reaction parameters on ECH activity in-order to overcome current limitations, including faradaic efficiency losses to the competitive hydrogen evolution reaction (HER), lower turnover rates compared to TCH, and varying degrees of hydrogenation. Furthermore, the wide range of reaction conditions employed in the phenol ECH literature makes comparison of the ECH performance difficult. Compared to the decades of research that have been devoted to small molecule electrocatalysis, our understanding of electro-organic conversions like phenol ECH is still in its infancy. The goal of this work is to advance insight into what parameters of the electrode/electrolyte interface govern phenol ECH activity and selectivity, in order to identify strategies for overcoming limitations that hinder rates and efficiency. We employ low-volume electrochemical systems with well-controlled mass transport combined with model catalysts/molecules to develop fundamental insights and extract kinetic parameters. In Chapter 3 we employ rotating disk electrode voltammetry to study phenol and hydrogen adsorption processes at the electrode surface. Our work using platinum single crystal electrodes reveals unique phenol/H adsorption behavior, showing slowed kinetics with increasing electrolyte pH. Comparison of Pt(111) and Pt(110) electrodes in phenol voltammetry and extended phenol electrolysis reveal that phenol adsorption strength is highly sensitive to atomic structure. In Chapter 4, we use chrono-amperometry on higher surface area platinum and rhodium electrodes combined with product analysis to investigate phenol ECH in alkaline pH, where we expect higher faradaic efficiency due to lower rates of the parasitic HER. Surprisingly, we find that phenol ECH on platinum and rhodium exhibit inverted pH trends. On platinum, increasing pH leads to significant decay in phenol ECH activity, becoming negligible above pH 9. On rhodium, however, phenol ECH activity is lowest in acidic electrolyte and highest near pH 10. Using suppression of H_[UPD] in the presence of varying phenol concentration as a proxy for phenol coverage, we use a Temkin adsorption isotherm to extract phenol adsorption energies and coverages across both acidic and alkaline pH. Our results point to slightly higher phenol coverage on rhodium than platinum, possibly explaining the overall higher rates of phenol ECH on rhodium, but could not sufficiently explain their opposite pH trends. With this, we turn to investigating the mechanistic progression for phenol ECH on both metals. Most of the existing phenol ECH literature assumes that like TCH, phenol ECH progresses through a Langmuir Hinshelwood (LH) mechanism in which surface adsorbed phenol reacts with neutral, surface adsorbed hydrogen in a hydrogen atom transfer step. It is possible in aqueous electrochemical systems, however, for phenol ECH to progress through an Eley-Rideal (ER) mechanism in which surface adsorbed phenol reacts with a proton abstracted directly from solution in a proton-coupled electron transfer. Our kinetic analysis constructing reaction order plots for phenol ECH suggested that an LH mechanism dominates on platinum while an ER mechanism dominates on rhodium. The high rates and faradaic efficiency observed for rhodium in base are likely a combination of its progression through an ER mechanism, the slower kinetics of hydrogen adsorption on rhodium than platinum, and the higher coverage of phenol on rhodium in base. We hypothesize that the peak activity near pH 10 is due to operating near the pKa of phenol where it is at dissociative equilibrium, where it can act to mediate and lower the barrier for proton transfer to surface adsorbed phenol. This mechanistic understanding pointed to the proton environment at the interface as a critical parameter space for controlling phenol ECH through an ER mechanism. In Chapters 5 and 6, we investigate the role of electrolyte components, namely buffer and cation species, that could potentially affect this environment. In Chapter 5, we identify the role of the buffer in not only regulating bulk and interfacial pH, but also as a low-barrier proton donor in ER kinetics unique to rhodium in alkaline electrolyte. The positive dependence of phenol ECH on buffer acid concentration supports our earlier evidence of an ER mechanism on rhodium in alkaline media and demonstrates how tuning the buffer composition can significantly improve phenol ECH activity. Operating near the pKa of the buffer acid species enhances this effect, showing how we can exploit the acid/base equilibria of both the buffer and phenol as proton-mediators. In Chapter 6 we investigate the role of alkali metal cations (Li⁺, Na⁺, K⁺, Cs⁺) with an understanding that the negative electric field present at ECH relevant potentials drives their accumulation at the interface. We find that cations can promote, inhibit, or exert no significant effect on phenol ECH activity depending on catalyst identity, pH, applied potential, and cation size: all factors that we identify to affect the degree of their interaction with the...

  • Open Access

    Nanoporous metals under extremes

    by Carlos J. Ruestes, Diana Farkas, Joshua Snyder

    Tailored control of the pattern forming instability that is initiated through selective dissolution in metal alloys has enabled the production of high-performing nanoporous metals. Nanoporous metals are “forged in fire,” evolving from exposure to harsh environments. This makes them uniquely adapted to extreme conditions with the potential for service in applications that require tolerance to corrosive environments, high-rate mechanical loading, and high-energy irradiation. Nanoporous metals are metastable structures and successful integration into extreme applications requires an atomistic understanding of how nanoporous morphologies evolve under relevant conditions. In this article, we explore our existing understanding of the evolution of nanoporous metals within extreme environments and how that understanding can be used to design mitigation strategies to drive operational longevity. Graphical abstract


  • Top Cited Papers
    Open Access

    Electrocatalysis: From Planar Surfaces to Nanostructured Interfaces

    by Alasdair R. Fairhurst, Joshua Snyder, Chao Wang, Dusan Strmcnik, Vojislav R. Stamenkovic

    The reactions critical for the energy transition center on the chemistry of hydrogen, oxygen, carbon, and the heterogeneous catalyst surfaces that make up electrochemical energy conversion systems. Together, the surface-adsorbate interactions constitute the electrochemical interphase and define reaction kinetics of many clean energy technologies. Practical devices introduce high levels of complexity where surface roughness, structure, composition, and morphology combine with electrolyte, pH, diffusion, and system level limitations to challenge our ability to deconvolute underlying phenomena. To make significant strides in materials design, a structured approach based on well-defined surfaces is necessary to selectively control distinct parameters, while complexity is added sequentially through careful application of nanostructured surfaces. In this review, we cover advances made through this approach for key elements in the field, beginning with the simplest hydrogen oxidation and evolution reactions and concluding with more complex organic molecules. In each case, we offer a unique perspective on the contribution of well-defined systems to our understanding of electrochemical energy conversion technologies and how wider deployment can aid intelligent materials design.


  • Insights into six-electron water oxidation on tin oxide based electrodes

    by Rayan Alaufey, Joshua Snyder

    Rapid global urbanization has created a pressing need for clean and accessible water supplies. Traditional water treatment methods are often limited by the increasing demands and complexities associated with human population growth and urban expansion. A critical factor exacerbating the gap between industrial progress and environmental sustainability is the inability of current water treatment technologies to effectively address the growing issue of water resources contamination. Advancements in electrochemical water treatment methods could provide a promising path towards bridging this gap and offer sustainable solutions to global water scarcity. Among electrochemical water treatment methods, the 6-e⁻ electrochemical ozone production (EOP) reaction stands out. EOP offers a significant advantage because it allows for the on-site generation of ozone (O₃), a powerful oxidizer with a minimal environmental footprint compared to traditional disinfectants. However, EOP is plagued by selectivity issues due to the competing and thermodynamically favored oxygen evolution reaction (OER). Nickel and antimony doped tin oxide (Ni/Sb-SnO₂) is one of the most known selective catalysts for EOP under normal operating conditions. Interestingly, un-doped tin oxide (SnO₂), antimony doped tin oxide (Sb-SnO₂), and nickel doped tin oxide (Ni-SnO₂) do not generate O₃. This work investigates the mechanism of EOP on SnO₂. Electrochemical analysis suggests the existence of leached Ni(II), Ni(III), and Ni(IV) under reaction conditions. Selective radical probes reveal the presence of solution-phase hydroxyl radicals (•OH) and hydroperoxyl radicals (•OOH) under reaction conditions, with •OOH being uniquely linked to O₃ production. Further analysis demonstrates a simultaneous emergence of O₂, O₃, •OH, and •OOH at the same potential, which suggests transient anodic hydrogen peroxide (H₂O₂) as a common source for all four species. Based on these findings, I suggest a mechanism in which leached Ni(IV) cations facilitate homogenous pseudo-Fenton reactions with H₂O₂ to generate •OOH radicals, which ultimately get oxidized to form O₃. Conversely, I show that Sb is catalytically inert and mainly serves as an n-type dopant that increases the electrical conductivity of the catalyst, which leads to higher electrochemical output. Based on the suggested mechanism, I establish a co-doping design strategy to induce EOP activity in SnO₂, which is otherwise EOP inactive. I show that selective O₃ production using SnO₂-based catalysts is broadly achievable by co-doping with two elements: First, n-type dopants that enhance electrical conductivity. Second, transition metal dopants that leach and catalyze the generation of •OOH from H₂O₂. To substantiate this hypothesis, I employ tantalum (Ta), and tungsten (W) as additional n-type dopants with cobalt (Co) and iron (Fe) as additional transition metal dopants. The results confirm that properly co-doping SnO₂ yields EOP-active and selective catalysts. Furthermore, I demonstrate that the relationship between EOP activity/selectivity and electrical conductivity exhibits and intermediate maximum value before decaying, which can be explained as a competition between homogenous radical production, ultimately leading to EOP, and heterogenous OER. Additionally, I delve into the lack of catalyst stability in the context of the proposed mechanism for EOP. Oxygen-anion chemical ionization mass spectrometry (CIMS) and isotopic product analysis demonstrate that O₃ forms corrosively from the catalyst's oxide lattice without lattice oxygen regeneration. Moreover, I demonstrate the presence of at least three O₃ isotopologues. Additional investigations suggest that the electrochemical corrosion of the catalyst itself yields H₂O₂, which is subsequently catalyzed to form O₃ and O₂. These proposed pathways provide insights into both the roles of dopants in enhancing activity and the observed lack of stability of the catalysts. This work is the first to suggest that instability and electrochemical activity might be intrinsically linked through the formation of reactive oxygen species.

  • Phenol-Mediated Proton Shuttling Enables Electrochemical Hydrogenation of Phenol in Alkaline Electrolytes on Rhodium

    by Brianna Markunas, Joshua David Snyder

    Thermal chemical hydrogenation (TCH) is a key reaction for upgrading petroleum and biomass feedstocks to value- added fuels and chemicals. TCH requires high operating temperatures and pressures which results in high energy consumption and CO2 emissions. Electrochemical hydrogenation (ECH) is a mild alternative where applied potential drives the hydrogenation of hydrocarbons with protons from the aqueous electrolyte near ambient conditions. Phenol is a simple representative compound for renewable lignocellulosic feedstocks that has been the focus of recent ECH studies. The added complexity from the electrolyte and applied potential in aqueous ECH systems requires a fundamental understanding of these reaction parameters on ECH activity in-order to overcome current limitations, including faradaic efficiency losses to the competitive hydrogen evolution reaction (HER). Furthermore, the wide range of reaction conditions employed in the phenol ECH literature makes comparison of the ECH performance difficult. Phenol ECH on PGMs is commonly performed in electrolytes in a pH range of 1-5, assuming that the ECH of phenol follows a Langmuir Hinshelwood (LH) mechanism [1, 2]. One study reported a 95% faradaic efficiency (FE) for phenol ECH on rhodium at pH 10 [3], but no further investigation into the source of this promising activity at alkaline pH has been conducted. In this work we study the role of electrolyte pH on phenol ECH on platinum and rhodium. We show that there are differing pH trends for ECH activity between platinum and rhodium, with the highest ECH rates on platinum at pH 1 and the highest rates on rhodium at pH 9, near the pka of phenol. We show using cyclic voltammetry and in-situ electrochemical FTIR that this pH dependent behavior results from the interplay between hydrogen adsorption kinetics, differences in phenol/hydrogen coverage on each metal, and competition with HER. We show that the electrolyte pH dictates the balance between a hydrogen atom transfer (LH) mechanism and a phenol-mediated proton coupled electron transfer mechanism. With this insight, we show that the unique properties of rhodium and the acid-base chemistry of phenol and the electrolyte buffer can be leveraged for higher ECH rates and FE. [1] Singh, N., et al., Aqueous Phase Catalytic and Electrocatalytic Hydrogenation of Phenol and Benzaldehyde over Platinum Group Metals. Journal of Catalysis 2020, 382, 372–384. https://doi.org/10.1016/j.jcat.2019.12.034. [2] Song, Y., et al., Integrated Catalytic and Electrocatalytic Conversion of Substituted Phenols and Diaryl Ethers. Journal of Catalysis 2016, 344, 263–272. https://doi.org/10.1016/j.jcat.2016.09.030. [3] Song, Y., et al., Aqueous Phase Electrocatalysis and Thermal Catalysis for the Hydrogenation of Phenol at Mild Conditions. Applied Catalysis B: Environmental 2016, 182, 236–246. https://doi.org/10.1016/j.apcatb.2015.09.027.

  • Exploring the Role of Interfacial Water and Adsorbed Hydroxide in Oxygen Reduction Reaction (ORR) Transients

    by Carolyn Spaulding, Joshua David Snyder

    Recently, Caffeine has been shown to improve the kinetics of the oxygen reduction reaction (ORR)[1], [2]. This activity improvement has been attributed to the adsorption geometry of caffeine at the electrode interface. To better understand this phenomena, fundamental studies of the impact of interfacial water and adsorbed hydroxide species must be conducted. We will examine the transient behavior of ORR on a well-defined Pt(111) electrode to achieve this. While transient current decay has been discussed regarding membrane electrode assemblies (MEAs), transients are rarely considered for rotating disk electrode (RDE) experiments [3]. We have found that Pt(111) transients in the ORR potential window last in the order of hundreds of seconds, notably longer than what is typically observed for polycrystalline electrodes. During these transients, initially slow current decay occurs until a critical point, where an inflection point indicates the transition to more rapid decay. We hypothesize that these dynamic transients are caused by 2D nucleation and growth of adsorbed spectator hydroxide islands. We will present our understanding of the surface processes occurring during ORR transients, gained from experiments in conjunction with microkinetic and kinetic Monte Carlo modeling. Understanding the kinetics of these surface processes will inform the development of small molecule interface modifiers, such as caffeine, that must balance ORR activity with transient behavior. References [1] R. Gawas, “Modifying Interface Solvation to Improve the Oxygen Reduction Reaction Electrocatalysis,” Doctor of Philosophy, Drexel University, Philadelphia, Pennsylvania, United States, 2023. doi: 10.17918/00001760. [2] N. Hoshi, M. Nakamura, R. Kubo, and R. Suzuki, “Enhanced oxygen reduction reaction on caffeine-modified platinum single-crystal electrodes,” Commun Chem, vol. 7, no. 1, p. 23, Feb. 2024, doi: 10.1038/s42004-024-01113-6. [3] J. Dang, F. Yang, Y. Li, X. Deng, and M. Ouyang, “Transient behaviors and mathematical model of proton exchange membrane electrolyzer,” Journal of Power Sources, vol. 542, p. 231757, Sep. 2022, doi: 10.1016/j.jpowsour.2022.231757.

  • Enhanced Electrochemical Hydrogenation of Aromatic Hydrocarbons in Alkaline Electrolytes

    by Brianna Markunas, Joshua David Snyder

    Thermal chemical hydrogenation (TCH) is a key reaction for converting petroleum and biomass feedstocks to value-added fuels and chemicals. Electrochemical hydrogenation (ECH) is a mild alternative where applied potential drives the hydrogenation of hydrocarbons with protons sourced from the aqueous electrolyte near ambient conditions. Lignocellulose is an abundant renewable feedstock comprised of complex phenolic compounds that can be valorized via ECH. Phenol and benzaldehyde are simple model compounds for lignocellulose that have been the focus of recent ECH studies. When both phenol and benzaldehyde are present as reactants, phenol has been shown to act as a proton shuttle, enhancing benzaldehyde ECH rates but with negligible phenol turnover. [1] The study of the role of electrolyte on the ECH of these aromatic hydrocarbons is limited to a few buffer systems (typically acetate, phosphate, or sulfate) and in a pH range of 1-5. However, it well-known that the competing hydrogen evolution reaction (HER) kinetics are slower in base, and that molecules like phenol dissociate within a pH range of 1-14. Thus, a complete understanding of the role of electrolyte pH, especially in alkaline media where slowed HER rates may improve faradaic efficiency of ECH, is desirable. In this work, we show using cyclic voltammetry and chronoamperometry with product analysis that there are contrasting pH trends between platinum and rhodium for phenol ECH, with the highest ECH rates on platinum at pH 1 and the highest ECH rates on rhodium at pH 10. In-situ electrochemical FTIR and electrochemical impedance spectroscopy reveal that this is the result of differences in hydrogen adsorption kinetics, phenol/H coverage, and competition with HER between the two metals. For phenol ECH on rhodium, we show that pH-driven changes dictate the balance between a hydrogen atom transfer (LH) mechanism and a phenol-mediated proton coupled electron transfer mechanism. We also discuss phenol’s role as a proton shuttle towards benzaldehyde hydrogenation in alkaline pH, near the pka of phenol. With this insight, we show that the unique properties of rhodium and strategic tuning of the acid-base chemistry of phenol and the electrolyte can be utilized to yield elevated ECH rates with enhanced FE through slowed HER. [1] Sanyal, U., et al., Hydrogen Bonding Enhances the Electrochemical Hydrogenation of Benzaldehyde in the Aqueous Phase. Angew Chem Int Ed 2021, 60 (1), 290–296. https://doi.org/10.1002/anie.202008178.

  • Open Access

    pH-Mediated Solution-Phase Proton Transfer Drives Enhanced Electrochemical Hydrogenation of Phenol in Alkaline Electrolyte

    by Brianna Markunas, Taber Yim, Joshua Snyder

    The faradaic efficiency (FE) of the electrochemical hydrogenation (ECH) of phenol and other biomass-derived model compounds could potentially be improved by operating in alkaline electrolytes, where the parasitic hydrogen evolution reaction rate is significantly slower due to a higher Volmer step barrier. However, this approach is potentially limited by the impact of the higher barrier for adsorbed hydrogen (Had) formation, as hydrocarbon ECH is expected to be limited by a hydrogen atom transfer, progressing through a Langmuir-Hinshelwood-type (LH) mechanism. In this work, we show that there are contrasting pH trends for phenol ECH between Pt and Rh, two common catalysts for ECH reactions. Phenol ECH FE and rate on Pt is highest in acidic electrolytes of pH ≤ 5, while activity on Rh is highest near pH 9-10. While our kinetic analysis supports a LH mechanism for Pt at all pH, phenol ECH on Rh shifts from a LH mechanism at low pH to being limited by a direct proton-coupled electron transfer (Eley-Rideal-type mechanism) in which surface adsorbed phenol is hydrogenated by solution-phase H-transfer. We show that the peak activity on Rh at pH 9-10 is due to the proximity of the pH to the pK a of phenol (pK a = 10.0). The reversibility of protonation/deprotonation of phenol when electrolyte pH matches its pK a helps to mediate H-transfer from solution to adsorbed phenol. We also discuss the role of buffer species in mitigating the local pH change and as a H-donor in phenol ECH on Rh at alkaline pH.