GDGiovanni Diaferia

Giovanni Diaferia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Giovanni Diaferia has a total of 630 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Using Quantum Annealing for Identifying Plausible Earthquake Rupture Paths in Fault Networks

    by Angela Stallone, Marcin Dukalski, Giovanni Diaferia, Kevin Milner

    Earthquake rupture forecasting is a critical component of seismic hazard analysis and requires identifying physically plausible rupture paths across complex fault networks. At its core, this task could be formulated as a large-scale combinatorial optimization problem, which involves selecting an optimal subset of fault segments from a set of candidates. Such problems pose significant challenges for traditional algorithms, as the number of admissible multi-fault ruptures grows combinatorially. Current operational workflows rely on locally applied plausibility filters. While computationally efficient, such greedy local heuristics risk excluding globally competitive rupture scenarios, particularly in regions with dense fault connectivity and competing rupture pathways. This work investigates whether quantum annealing hardware can serve as a sampling accelerator for exploring the ensemble of physically plausible ruptures beyond what is currently accessible to classical approaches. Designing a problem formulation that remains scientifically meaningful while respecting the constraints of current quantum hardware (size, noise, etc.) is nontrivial, and naïve encodings often collapse under these limitations. We encode rupture plausibility modeling as low energy solutions to a quadratic unconstrained binary optimization (QUBO) problem defined on a fault-network middle graph. Binary variables represent activated fault segments, while local interaction terms encode Coulomb stress transfer (as a proxy for pairwise rupture compatibility), continuity preferences, and branching behavior. Here, we adopt a classical-quantum hybrid workflow: the quantum annealer is used to sample globally competitive rupture candidates, while classical post-processing implements physical constraints to filter out non-physical ruptures. The workflow is demonstrated on a subset of the fault network used in the 2023 USGS National Seismic Hazard Model including over 200 fault segments, using both simulated thermal and quantum annealing on D-Wave hardware. Results show that our hardware-aware formulation and conditioning enable robust sampling on comparatively large fault-network instances. Views on quantum computing are polarized: some overstate its power, while others dismiss it as impractical. Our results help bridge this by establishing a concrete, testable pathway for integrating quantum annealing into rupture-modeling workflows on existing purpose-built quantum devices.—---This work is supported by the ICSC National Research Centre for High Performance Computing, Big Data and Quantum Computing (CN00000013, CUP D53C22001300005) within the European Union-NextGenerationEU program (National Recovery and Resilience Plan (PNRR) - Mission 4 Component 2 Investment 1.4.)

  • Open Access

    The Science of the Einstein Telescope

    by Adrian Abac, Raul Abramo, Simone Albanesi, Angelica Albertini, Alessandro Agapito, Michalis Agathos, Conrado Albertus, Nils Andersson, Tomás Andrade, Igor Andreoni, et al.

    Einstein Telescope (ET) is the European project for a gravitational-wave (GW) observatory of third-generation. In this paper we present a comprehensive discussion of its science objectives, providing state-of-the-art predictions for the capabilities of ET in both geometries currently under consideration, a single-site triangular configuration or two L-shaped detectors. We discuss the impact that ET will have on domains as broad and diverse as fundamental physics, cosmology, early Universe, astrophysics of compact objects, physics of matter in extreme conditions, and dynamics of stellar collapse. We discuss how the study of extreme astrophysical events will be enhanced by multi-messenger observations. We highlight the ET synergies with ground-based and space-borne GW observatories, including multi-band investigations of the same sources, improved parameter estimation, and complementary information on astrophysical or cosmological mechanisms obtained combining observations from different frequency bands. We present advancements in waveform modeling dedicated to third-generation observatories, along with open tools developed within the ET Collaboration for assessing the scientific potentials of different detector configurations. We finally discuss the data analysis challenges posed by third-generation observatories, which will enable access to large populations of sources and provide unprecedented precision.


  • Open Access

    The UK and Ireland Geophysical Array -- Concept and Design

    by Andrew Curtis, Karen Lythgoe, Stephen P. Hicks, Lidong Bie, Dominik Strutz, Emma Chambers, Brian Baptie, Dave Cornwell, Juliane Huebert, Jessica Irving, et al.

    Scientific exploration of the UK and Ireland's subsurface has made important contributions to scholarship and prosperity for people and the planet, including economic growth, sustainable use of natural resources, storage of greenhouse gases, and inspiring curiosity about the Earth beneath our feet. This article outlines a vision for an array of seismological instruments spanning the UK and Ireland, UKI Array, augmented by other types of geophysical sensors, to maximise the value offered by existing equipment pools. The mission is to research natural phenomena and structure in the deep and shallow Earth, to solve problems concerning hazards and resources, to connect scientists to schools and the broader public, and thus to inspire a new generation to learn about geophysics. The vision was created through a community driven process of engagement and participation. This paper describes the concept and design of the UKI-Array; a companion paper discusses related opportunities and potential applications.

  • Open Access

    Seismic Array Measurements in the Italian Candidate Site for the Einstein Telescope, the Third-Generation Gravitational Wave Detector

    by Giovanni Diaferia, Marco Olivieri, Irene Molinari, Annalisa Allocca, Enrico Calloni, Giovanni Luca Cardello, Andrea Contu, Domenico D'URso, Rosario De Rosa, Matteo Di Giovanni, et al.

    Geophysical investigations and studies on the local seismic noise are of paramount importance for evaluating the candidate locations for hosting Einstein Telescope (ET), the third-generation gravitational wave detector. In the Italian candidate site, several active and passive geophysical acquisitions have been carried out, mainly focusing on the imaging of the shallow subsurface, while a full characterization of the noise wavefield was lacking. In this work, we present the results from three temporary seismic arrays installed at the Italian candidate site, each with different geometrical layouts, recording durations, and total numbers of stations. Here, we provide an overview on the seismic noise characteristics and its azimuthal distribution, obtained through beamforming. Moreover, we leverage the noise recordings to extract (i) Rayleigh wave dispersion curves using fk analysis, which are then inverted to obtain a one-dimensional, shear-wave velocity model of the subsurface and (ii) HVSR spectra across all arrays' stations. The recordings confirm the exceptionally low level of seismic noise approaching Peterson's New Low Noise Model for frequencies > 1 Hz. The arrays allowed to reliably reconstruct the seismic wavefield in the 10–20 Hz range, showing an almost azimuthally homogeneous noise source distribution, with slowness values between 0.4 and 0.5 s/km. The inversion of dispersion curves in the same frequency range highlighted a rather homogeneous, high-velocity terrain (VS=2–3 km/s) in the first 100 m. The flat HVSR spectra across all arrays excludes the presence of a resonant, low-velocity layer at shallow depth.

  • Open Access

    The impact of local noise recorded at the ET candidate sites on the signal to noise ratio of CBC gravitational wave signals for the ET triangle configuration

    by Matteo Di Giovanni, Davide Rozza, Rosario De Rosa, Enrico Calloni, Domenico D’uRso, Luca Naticchioni, Annalisa Allocca, Giovanni Luca Cardello, Alessandro Cardini, Andrea Contu, et al.

    We present an evaluation of how site dependent noise can affect the signal to noise ratio (SNR) of compact binary coalescence (CBC) signals in the future 3rd generation gravitational wave (GW) detector Einstein telescope (ET). The design of ET is currently pushing the scientific community to study its scientific potential with respect to known, and possibly unexpected, GW signals using its design sensitivity curves. However, local ambient noise may have an impact on the ET sensitivity at low frequency and therefore affect the SNR of CBC signals at low frequency. Therefore, we study the impact of ambient noise on the ET sensitivity curve at the two sites candidate to host ET—Sardinia, in Italy, and the Euregio Meuse–Rhine (EMR) at the Netherlands–Belgium border—and infer the impact on the ET sensitivity curve and how the SNR of CBC signals at low frequencies is affected. We find that Sardinia shows results which are on par, if not better, than the design case. On the other hand, ambient noise for the current EMR sensitivity curve in Terziet causes a higher degradation of the SNR performances.


  • Open Access

    Seismic noise characterization for the Buddusò–Ala dei Sardi wind park (Sardinia, Italy) and its impact on the Einstein Telescope candidate site

    by Giovanni Diaferia, Irene Molinari, Marco Olivieri, Fabio Di Felice, Andrea Contu, Domenico D'URso, Luca Naticchioni, Davide Rozza, Jan Harms, Alessandro Cardini, et al.

    Wind turbines generate considerable seismic noise and interfere with sensitive instruments, such as permanent and temporary seismic sensors installed nearby, hampering their detection capabilities. This study investigates the seismic noise emission from one of Italy's largest wind farms, consisting of 69 turbines (2 MW each), located in northeastern Sardinia. Characterizing the noise emission from this wind farm is of particular importance due to its proximity to the Italian candidate site for hosting the Einstein Telescope (ET), the third-generation observatory for gravitational waves. We run a passive seismic experiment, “Wind turbIne Noise assEsSment in the Italian site candidate for Einstein Telescope” (WINES), using a linear array of nine broadband stations, installed at increasing distances from the wind farm. Spectral analysis, based on the retrieval of spectrograms and power spectral densities at all stations, shows a significant increase in noise amplitude when the wind farm is in operation. The reconstruction of noise polarization points out that the noise wavefield originates from a direction consistent with the wind farm's location. We recognize four dominant fixed spectral peaks at 3.4, 5.0, 6.8, and 9.5 Hz, corresponding to the modes of vibration of the wind turbine towers. While decreasing in amplitude with distance, the 3.4 Hz peak remains detectable up to 13 km from the nearest turbine. Assuming an amplitude decay model of the form r−α, where r is the distance, we estimate a damping factor of α∼2, which remains rather constant for each of the four main peaks, an observation that we relate to the good geomechanical characteristics of the local terrain, consisting of granitoid rocks. To better evaluate the possible impact of the wind farm noise emission on the ET, we also analyze the seismic data from two permanent stations bordering the ET candidate site area, each equipped with both a surface sensor and a borehole sensor at approximately 250 m depth. Power spectral density analysis for the surface and borehole sensors exhibits similar results and very low noise levels. When the wind farm operates at full capacity, the borehole sensors show an effective noise suppression at depth in the frequency range of interest (1–10 Hz). However, small residual spectral peaks at 3.4 Hz and between 4–6 Hz remain detectable.


  • Open Access

    Reply on RC2

    by Giovanni Diaferia, Carlo Giunchi, Marco Olivieri, Irene Molinari, Fabio Di Felice, Andrea Contu, Domenico D'Urso, Luca Naticchioni, Davide Rozza, Jan Harms, et al.

    Wind turbines generate significant seismic noise and interfere with sensitive instruments, such as permanent and temporary seismic sensors installed nearby, hampering their detection capabilities. This study investigates the seismic noise emission from one of Italy’s largest wind farms, consisting of 69 turbines (2 MW each), located in northeastern Sardinia. Characterizing the noise emission from this wind farm is of particular importance due to its proximity to the Italian candidate site for hosting the Einstein Telescope, the third-generation observatory for gravitational waves. We run a passive seismic experiment (WINES, 'Wind turbIne Noise assEsSment in the Italian site candidate for Einstein Telescope') using a linear array of nine broadband stations, installed at increasing distances from the wind farm. Spectral analysis, based on the retrieval of spectrograms and power spectral densities at all stations, shows a significant increase in noise amplitude when the wind farm is in operation. The reconstruction of noise polarization points out that the noise wavefield originates from a direction consistent with the wind farm’s location. We recognize four dominant fixed spectral peaks at 3.4, 5.0, 6.8, and 9.5 Hz, corresponding to the modes of vibration of the wind turbine towers. While decreasing in amplitude with distance, the 3.4 Hz peak remains detectable up to 13 km from the nearest turbine. Assuming an amplitude decay model of the form r -α, where r is the distance, we estimate a damping factor of α∼2, that remains rather constant for each of the four main peaks, an observation that we relate to the good geomechanical characteristics of the local terrain, consisting of granitoid rocks. To better evaluate the possible impact of the wind farm noise emission on the Einstein Telescope, we also analyze the seismic data from two permanent stations bordering the ET candidate site area, each equipped with both a surface and borehole sensor at approximately 250 m depth. Power spectral density analysis for the surface and borehole sensors exhibits similar results and very low noise levels. When the wind farm operates at full capacity, the borehole sensors remain unaffected by the emitted seismic noise, highlighting the significant noise suppression at depth. However, small residual spectral peaks at 3.4 Hz and between 4–6 Hz remain detectable.

  • Open Access

    Reply on RC1

    by Giovanni Diaferia, Carlo Giunchi, Marco Olivieri, Irene Molinari, Fabio Di Felice, Andrea Contu, Domenico D'Urso, Luca Naticchioni, Davide Rozza, Jan Harms, et al.

    Wind turbines generate significant seismic noise and interfere with sensitive instruments, such as permanent and temporary seismic sensors installed nearby, hampering their detection capabilities. This study investigates the seismic noise emission from one of Italy’s largest wind farms, consisting of 69 turbines (2 MW each), located in northeastern Sardinia. Characterizing the noise emission from this wind farm is of particular importance due to its proximity to the Italian candidate site for hosting the Einstein Telescope, the third-generation observatory for gravitational waves. We run a passive seismic experiment (WINES, 'Wind turbIne Noise assEsSment in the Italian site candidate for Einstein Telescope') using a linear array of nine broadband stations, installed at increasing distances from the wind farm. Spectral analysis, based on the retrieval of spectrograms and power spectral densities at all stations, shows a significant increase in noise amplitude when the wind farm is in operation. The reconstruction of noise polarization points out that the noise wavefield originates from a direction consistent with the wind farm’s location. We recognize four dominant fixed spectral peaks at 3.4, 5.0, 6.8, and 9.5 Hz, corresponding to the modes of vibration of the wind turbine towers. While decreasing in amplitude with distance, the 3.4 Hz peak remains detectable up to 13 km from the nearest turbine. Assuming an amplitude decay model of the form r -α, where r is the distance, we estimate a damping factor of α∼2, that remains rather constant for each of the four main peaks, an observation that we relate to the good geomechanical characteristics of the local terrain, consisting of granitoid rocks. To better evaluate the possible impact of the wind farm noise emission on the Einstein Telescope, we also analyze the seismic data from two permanent stations bordering the ET candidate site area, each equipped with both a surface and borehole sensor at approximately 250 m depth. Power spectral density analysis for the surface and borehole sensors exhibits similar results and very low noise levels. When the wind farm operates at full capacity, the borehole sensors remain unaffected by the emitted seismic noise, highlighting the significant noise suppression at depth. However, small residual spectral peaks at 3.4 Hz and between 4–6 Hz remain detectable.

  • Open Access

    Results from WINES: Wind turbIne Noise assEsSment in the Italian site candidate for “Einstein Telescope”, the third-generation gravitational wave detector.

    by Giovanni Diaferia, Carlo Giunchi, Irene Molinari, Marco Olivieri, Fabio Di Felice, Andrea Contu, Domenico D'URso, Luca Naticchioni, Davide Rozza

    The area in the municipalities of Lula, Bitti, and Onanì in Sardinia (Italy) is a candidate for hosting the “Einstein Telescope” (ET, the third-generation gravitational wave detector), given the extremely low level of natural and anthropogenic seismic noise at this site. For the same unique characteristics of this area, the multi-disciplinary geophysical far-field observatory “Faber” (PNRR-Meet project) will be set up.However, the strength and persistence of wind make this area exceptionally favorable for the exploitation of wind energy, as testified by the nearby Buddusò wind park that, consisting of 69 turbines and about 130 MW of total installed power, is the largest in Italy.It is well known that wind turbines are an important source of seismic noise between 1 and 10 Hz, posing a relevant concern for noise contamination of ET as it will operate in the same frequency range.In the context of the seismic characterization of such a candidate site, the WINES experiment (Wind turbIne Noise assEsSment in the Italian site candidate for the Einstein Telescope) provided a two-month-long passive seismic recording of nine broad-band stations placed at increasing distances from the Buddusò wind park. The aim of the experiment was the evaluation of the noise generated by the wind park in terms of amplitude, spectral content, and decay with distance, in relation to the wind park operation.Analyzing the frequency spectra at all stations, the spectral imprint of the wind park manifests through sharp, well-defined spectral peaks at 3.4, 5.0, 6.8, and 9.4 Hz, even in conditions of absent or moderate wind speed (0-3 m/s). With stronger winds (>20 m/s), all spectra increase their amplitude by an order of magnitude, and the sharpest and most persistent peaks are found at 3.5, 5.2, and 6.8 Hz. In both wind conditions, the amplitude of such peaks decreases with distance, being clearly distinguishable up to 5-6 km from the wind park. We use these spectral peaks to derive an empirical relationship for their amplitude vs. distance, highlighting a well-behaved exponential decay that translates into a two-orders-of-magnitude decrease within 10 km distance.Lastly, considering the assumption that the generated seismic noise propagates as Rayleigh waves, the continuous recordings along the array have been used for the estimation of the direction of noise arrival at each station. Signal coherence allows the recovery of this information for stations within 5 km from the wind park, showing a dominant back-azimuth of the incoming signal that is fully compatible with the position of the wind park with respect to each station.

  • Open Access

    Seismic noise characterisation for the Buddusò – Ala dei Sardi wind park (Sardinia, Italy) and its impact on the Einstein Telescope candidate site

    by Giovanni Diaferia, Carlo Giunchi, Marco Olivieri, Irene Molinari, Fabio Di Felice, Andrea Contu, Domenico D'URso, Luca Naticchioni, Davide Rozza, Jan Harms, et al.

    Wind turbines generate significant seismic noise and interfere with sensitive instruments, such as permanent and temporary seismic sensors installed nearby, hampering their detection capabilities. This study investigates the seismic noise emission from one of Italy’s largest wind farms, consisting of 69 turbines (2 MW each), located in northeastern Sardinia. Characterizing the noise emission from this wind farm is of particular importance due to its proximity to the Italian candidate site for hosting the Einstein Telescope, the third-generation observatory for gravitational waves. We run a passive seismic experiment (WINES, 'Wind turbIne Noise assEsSment in the Italian site candidate for Einstein Telescope') using a linear array of nine broadband stations, installed at increasing distances from the wind farm. Spectral analysis, based on the retrieval of spectrograms and power spectral densities at all stations, shows a significant increase in noise amplitude when the wind farm is in operation. The reconstruction of noise polarization points out that the noise wavefield originates from a direction consistent with the wind farm’s location. We recognize four dominant fixed spectral peaks at 3.4, 5.0, 6.8, and 9.5 Hz, corresponding to the modes of vibration of the wind turbine towers. While decreasing in amplitude with distance, the 3.4 Hz peak remains detectable up to 13 km from the nearest turbine. Assuming an amplitude decay model of the form r -α, where r is the distance, we estimate a damping factor of α∼2, that remains rather constant for each of the four main peaks, an observation that we relate to the good geomechanical characteristics of the local terrain, consisting of granitoid rocks. To better evaluate the possible impact of the wind farm noise emission on the Einstein Telescope, we also analyze the seismic data from two permanent stations bordering the ET candidate site area, each equipped with both a surface and borehole sensor at approximately 250 m depth. Power spectral density analysis for the surface and borehole sensors exhibits similar results and very low noise levels. When the wind farm operates at full capacity, the borehole sensors remain unaffected by the emitted seismic noise, highlighting the significant noise suppression at depth. However, small residual spectral peaks at 3.4 Hz and between 4–6 Hz remain detectable.