Shizuka Yamada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shizuka Yamada has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Yoshihiko Hayashi
Nagasaki University Graduate School of Biomedical Sciences
10 shared publications Kajiro Yanagiguchi
Department of Cariology, Nagasaki University Graduate School of Biomedical Sciences, Nagasaki 852-8588, Japan
7 shared publicationsKohei Yamamoto
Department of Cariology, Nagasaki University Graduate School of Biomedical Sciences, Nagasaki 852-8588, Japan
5 shared publicationsKouji Sugimoto
Department of Cariology, Nagasaki University Graduate School of Biomedical Sciences, Nagasaki 852-8588, Japan
4 shared publications- Takeshi Ikeda
Department of Cariology, Nagasaki University Graduate School of Biomedical Sciences, Nagasaki 852-8588, Japan
4 shared publications Yuu Yoshizawa
Department of Cariology, Nagasaki University Graduate School of Biomedical Sciences, Nagasaki 852-8588, Japan
3 shared publications
Latest Publications
- Open Access
- 1 January 2026
- Published by Nihon University School of Dentistry in Journal of Oral Science
- Vol. 68 (4) , 268-270
Genipin-mediated dentin biomodification using nanobubble water
Genipin is a naturally derived cross-linking agent used to stabilize collagen-based biomaterials. This study evaluated dentin biomodification following intracanal application of genipin solutions prepared with Milli-Q water or nanobubble water. Bovine root canals were treated with different concentrations of genipin, and collagenase resistance, dentin discoloration, and dentin hardness were assessed. Genipin concentration significantly affected all outcomes, while the solvent significantly affected hydroxyproline levels and dentin hardness. No significant solvent-concentration interactions were detected. These findings suggest that nanobubble water may influence genipin-mediated dentin biomodification and warrant further investigation as a vehicle for intracanal genipin application.
- 1 January 2026
- Published by Nihon University School of Dentistry in Journal of Oral Science
- Vol. 68 (4) , 268-270
Open AccessGenipin-mediated dentin biomodification using nanobubble water
Genipin is a naturally derived cross-linking agent used to stabilize collagen-based biomaterials. This study evaluated dentin biomodification following intracanal application of genipin solutions prepared with Milli-Q water or nanobubble water. Bovine root canals were treated with different concentrations of genipin, and collagenase resistance, dentin discoloration, and dentin hardness were assessed. Genipin concentration significantly affected all outcomes, while the solvent significantly affected hydroxyproline levels and dentin hardness. No significant solvent-concentration interactions were detected. These findings suggest that nanobubble water may influence genipin-mediated dentin biomodification and warrant further investigation as a vehicle for intracanal genipin application.
- 24 September 2024
- Published by Wiley in European Journal of Oral Sciences
- Vol. 132 (5) , e13017
Effects of sodium copper‐ and sodium iron‐chlorophyllin primers on resin bonding to dentin
This study evaluated the effects of two chlorophyll derivatives, sodium copper chlorophyllin (Cu‐Chl) and sodium iron chlorophyllin (Fe‐Chl), on the bond strength between a self‐curing luting agent (4‐META/MMA‐TBB resin) and dentin. Five aqueous primers containing 35% 2‐hydroxyethylmethacrylate with 0.007% Cu‐Chl, 0.07% Cu‐Chl, 0.007% Fe‐Chl, 0.07% Fe‐Chl, or neither Cu‐Chl nor Fe‐Chl (no‐Chl) were prepared. The extracted human dentin surfaces were etched with 10% phosphoric acid (10PA), primed, and bonded to a resin block using the 4‐META/MMA‐TBB resin. A conventional etching agent (10‐3) and 10PA without primer (PA/no‐primer) were used as controls. The microtensile bond strength was determined after 48 h. The arithmetic medians for 20 stick specimens were calculated and statistically analyzed using a nonparametric Steel‐Dwass test (α = 0.05). The maximum bond strength was achieved in the 0.007% Cu‐Chl group, followed by those in the 0.07% Cu‐Chl, 0.07% Fe‐Chl, 10‐3, 0.007% Fe‐Chl, no‐Chl, and PA/no‐primer groups. No significant difference was observed between 0.007% Fe‐Chl, 0.07% Fe‐Chl, and 10‐3. The bond strength to dentin etched with 10PA was influenced by the type and concentration of the chlorophyll derivatives applied. Cu‐Chl rather than Fe‐Chl should be useful as a component of surface treatment agents for bonding 4‐META/MMA‐TBB resin to dentin.
- 24 September 2024
- Published by Wiley in European Journal of Oral Sciences
- Vol. 132 (5) , e13017
Effects of sodium copper‐ and sodium iron‐chlorophyllin primers on resin bonding to dentin
This study evaluated the effects of two chlorophyll derivatives, sodium copper chlorophyllin (Cu‐Chl) and sodium iron chlorophyllin (Fe‐Chl), on the bond strength between a self‐curing luting agent (4‐META/MMA‐TBB resin) and dentin. Five aqueous primers containing 35% 2‐hydroxyethylmethacrylate with 0.007% Cu‐Chl, 0.07% Cu‐Chl, 0.007% Fe‐Chl, 0.07% Fe‐Chl, or neither Cu‐Chl nor Fe‐Chl (no‐Chl) were prepared. The extracted human dentin surfaces were etched with 10% phosphoric acid (10PA), primed, and bonded to a resin block using the 4‐META/MMA‐TBB resin. A conventional etching agent (10‐3) and 10PA without primer (PA/no‐primer) were used as controls. The microtensile bond strength was determined after 48 h. The arithmetic medians for 20 stick specimens were calculated and statistically analyzed using a nonparametric Steel‐Dwass test (α = 0.05). The maximum bond strength was achieved in the 0.007% Cu‐Chl group, followed by those in the 0.07% Cu‐Chl, 0.07% Fe‐Chl, 10‐3, 0.007% Fe‐Chl, no‐Chl, and PA/no‐primer groups. No significant difference was observed between 0.007% Fe‐Chl, 0.07% Fe‐Chl, and 10‐3. The bond strength to dentin etched with 10PA was influenced by the type and concentration of the chlorophyll derivatives applied. Cu‐Chl rather than Fe‐Chl should be useful as a component of surface treatment agents for bonding 4‐META/MMA‐TBB resin to dentin.
- Open Access
- 22 November 2017
- Published by Wiley in International Journal of Polymer Science
- Vol. 2017, 1-2
Corrigendum to “Fish Collagen Promotes the Expression of Genes Related to Osteoblastic Activity”
- 22 November 2017
- Published by Wiley in International Journal of Polymer Science
- Vol. 2017, 1-2
Open AccessCorrigendum to “Fish Collagen Promotes the Expression of Genes Related to Osteoblastic Activity”
- Open Access
- 1 January 2016
- Published by Wiley in International Journal of Polymer Science
- Vol. 2016, 1-7
Fish Collagen Promotes the Expression of Genes Related to Osteoblastic Activity
Tilapia type I atelocollagen (TAC) is a strong candidate for clinical application as its biological scaffold due to a high degeneration temperature and biologically safe properties. The aim of this study was to confirm the biological effects of TACin vitroon osteoblastic cells, simulating its clinical application. The proliferation and differentiation of typical preosteoblasts, MC3T3-E1 cells, were investigated using a microarray analysis, staining assay for mineralization, and real-time PCR analysis of the expression of mineralization-related genes. The mRNA expression of 10 genes involved in proliferation and differentiation increased after 3-day culture on an TAC gel, with an average balanced score ratio exceeding 1.5 compared to the control. After two weeks of culture, all three experimental groups showed stronger alkaline phosphatase staining than after one week. The genes expression of alkaline phosphatase, osteocalcin, and bone sialoprotein increased under the experimental conditions. The gene expression of osteopontin did not increase, and no statistical differences were noted among the three experimental groups. The present and previous findings suggest that TAC is not only a suitable alternative to collagen products originating from mammals but also a novel biomaterial with cell differentiation ability for regenerative medicine.
- 1 January 2016
- Published by Wiley in International Journal of Polymer Science
- Vol. 2016, 1-7
Open AccessFish Collagen Promotes the Expression of Genes Related to Osteoblastic Activity
Tilapia type I atelocollagen (TAC) is a strong candidate for clinical application as its biological scaffold due to a high degeneration temperature and biologically safe properties. The aim of this study was to confirm the biological effects of TACin vitroon osteoblastic cells, simulating its clinical application. The proliferation and differentiation of typical preosteoblasts, MC3T3-E1 cells, were investigated using a microarray analysis, staining assay for mineralization, and real-time PCR analysis of the expression of mineralization-related genes. The mRNA expression of 10 genes involved in proliferation and differentiation increased after 3-day culture on an TAC gel, with an average balanced score ratio exceeding 1.5 compared to the control. After two weeks of culture, all three experimental groups showed stronger alkaline phosphatase staining than after one week. The genes expression of alkaline phosphatase, osteocalcin, and bone sialoprotein increased under the experimental conditions. The gene expression of osteopontin did not increase, and no statistical differences were noted among the three experimental groups. The present and previous findings suggest that TAC is not only a suitable alternative to collagen products originating from mammals but also a novel biomaterial with cell differentiation ability for regenerative medicine.
- Open Access
- 1 January 2015
- Published by Wiley in International Journal of Polymer Science
- Vol. 2015, 1-5
The Characterization of Fish (Tilapia) Collagen Sponge as a Biomaterial
For scaffold manufacturing, the utility of bioactive natural organic materials derived from marine products is useful and indispensable as an alternative to bovine collagen. The weakest feature of fish collagen for scaffold application is its low degeneration temperature (), indicating poor stability of fish collagen in mammalsin vivo. We have focused on the tropical fish tilapia as a candidate for generating a clinical scaffold. The aim of this study was to confirm theof tilapia type I atelocollagen (TAC) for biomedical application. Furthermore, the physical and structural properties were investigated and evaluated as a scaffold on a sponge form. Different concentrations {0.5%, 1.0%, and 2.0% (v/v)} of TAC solution were analyzed. Differential scanning calorimetry showed that theof TAC was 35-36°C. The scanning electron microscopy results indicated that the pore size (90–160 μm) of TAC sponges is acceptable for cell proliferation. The tensile strength of porous sponges was in the range of 0.01–0.07 MPa. These findings indicate that the TAC sponge prepared from tilapia is one of candidates as a scaffold. The 1.0% (v/v) concentration of TAC solution is especially recommended to be advantageous for preparing and handling the solution and for sponge formation.- 1 January 2015
- Published by Wiley in International Journal of Polymer Science
- Vol. 2015, 1-5
Open AccessThe Characterization of Fish (Tilapia) Collagen Sponge as a Biomaterial
For scaffold manufacturing, the utility of bioactive natural organic materials derived from marine products is useful and indispensable as an alternative to bovine collagen. The weakest feature of fish collagen for scaffold application is its low degeneration temperature (), indicating poor stability of fish collagen in mammalsin vivo. We have focused on the tropical fish tilapia as a candidate for generating a clinical scaffold. The aim of this study was to confirm theof tilapia type I atelocollagen (TAC) for biomedical application. Furthermore, the physical and structural properties were investigated and evaluated as a scaffold on a sponge form. Different concentrations {0.5%, 1.0%, and 2.0% (v/v)} of TAC solution were analyzed. Differential scanning calorimetry showed that theof TAC was 35-36°C. The scanning electron microscopy results indicated that the pore size (90–160 μm) of TAC sponges is acceptable for cell proliferation. The tensile strength of porous sponges was in the range of 0.01–0.07 MPa. These findings indicate that the TAC sponge prepared from tilapia is one of candidates as a scaffold. The 1.0% (v/v) concentration of TAC solution is especially recommended to be advantageous for preparing and handling the solution and for sponge formation. - 1 November 2014
- Published by Elsevier in Journal of Endodontics
- Vol. 40 (11) , 1824-1829
Comparison of Conventional and New-generation Nickel-Titanium Files in Regard to Their Physical Properties
- 1 November 2014
- Published by Elsevier in Journal of Endodontics
- Vol. 40 (11) , 1824-1829
Comparison of Conventional and New-generation Nickel-Titanium Files in Regard to Their Physical Properties
- Open Access
- 25 May 2014
- Published by Wiley in BioMed Research International
- Vol. 2014, 1-8
Potency of Fish Collagen as a Scaffold for Regenerative Medicine
Cells, growth factors, and scaffold are the crucial factors for tissue engineering. Recently, scaffolds consisting of natural polymers, such as collagen and gelatin, bioabsorbable synthetic polymers, such as polylactic acid and polyglycolic acid, and inorganic materials, such as hydroxyapatite, as well as composite materials have been rapidly developed. In particular, collagen is the most promising material for tissue engineering due to its biocompatibility and biodegradability. Collagen contains specific cell adhesion domains, including the arginine-glycine-aspartic acid (RGD) motif. After the integrin receptor on the cell surface binds to the RGD motif on the collagen molecule, cell adhesion is actively induced. This interaction contributes to the promotion of cell growth and differentiation and the regulation of various cell functions. However, it is difficult to use a pure collagen scaffold as a tissue engineering material due to its low mechanical strength. In order to make up for this disadvantage, collagen scaffolds are often modified using a cross-linker, such as gamma irradiation and carbodiimide. Taking into account the possibility of zoonosis, a variety of recent reports have been documented using fish collagen scaffolds. We herein review the potency of fish collagen scaffolds as well as associated problems to be addressed for use in regenerative medicine.
- 25 May 2014
- Published by Wiley in BioMed Research International
- Vol. 2014, 1-8
Open AccessPotency of Fish Collagen as a Scaffold for Regenerative Medicine
Cells, growth factors, and scaffold are the crucial factors for tissue engineering. Recently, scaffolds consisting of natural polymers, such as collagen and gelatin, bioabsorbable synthetic polymers, such as polylactic acid and polyglycolic acid, and inorganic materials, such as hydroxyapatite, as well as composite materials have been rapidly developed. In particular, collagen is the most promising material for tissue engineering due to its biocompatibility and biodegradability. Collagen contains specific cell adhesion domains, including the arginine-glycine-aspartic acid (RGD) motif. After the integrin receptor on the cell surface binds to the RGD motif on the collagen molecule, cell adhesion is actively induced. This interaction contributes to the promotion of cell growth and differentiation and the regulation of various cell functions. However, it is difficult to use a pure collagen scaffold as a tissue engineering material due to its low mechanical strength. In order to make up for this disadvantage, collagen scaffolds are often modified using a cross-linker, such as gamma irradiation and carbodiimide. Taking into account the possibility of zoonosis, a variety of recent reports have been documented using fish collagen scaffolds. We herein review the potency of fish collagen scaffolds as well as associated problems to be addressed for use in regenerative medicine.
- Open Access
- 6 April 2014
- Published by Wiley in BioMed Research International
- Vol. 2014, 1-8
Fabrication and Characteristics of Chitosan Sponge as a Tissue Engineering Scaffold
Cells, growth factors, and scaffolds are the three main factors required to create a tissue-engineered construct. After the appearance of bovine spongiform encephalopathy (BSE), considerable attention has therefore been focused on nonbovine materials. In this study, we examined the properties of a chitosan porous scaffold. A porous chitosan sponge was prepared by the controlled freezing and lyophilization of different concentrations of chitosan solutions. The materials were examined by scanning electron microscopy, and the porosity, tensile strength, and basic fibroblast growth factor (bFGF) release profiles from chitosan sponge were examined in vitro. The morphology of the chitosan scaffolds presented a typical microporous structure, with the pore size ranging from 50 to 200 μm. The porosity of chitosan scaffolds with different concentrations was approximately 75–85%. A decreasing tendency for porosity was observed as the concentration of the chitosan increased. The relationship between the tensile properties and chitosan concentration indicated that the ultimate tensile strength for the sponge increased with a higher concentration. The in vitro bFGF release study showed that the higher the concentration of chitosan solution became, the longer the releasing time of the bFGF from the chitosan sponge was.
- 6 April 2014
- Published by Wiley in BioMed Research International
- Vol. 2014, 1-8
Open AccessFabrication and Characteristics of Chitosan Sponge as a Tissue Engineering Scaffold
Cells, growth factors, and scaffolds are the three main factors required to create a tissue-engineered construct. After the appearance of bovine spongiform encephalopathy (BSE), considerable attention has therefore been focused on nonbovine materials. In this study, we examined the properties of a chitosan porous scaffold. A porous chitosan sponge was prepared by the controlled freezing and lyophilization of different concentrations of chitosan solutions. The materials were examined by scanning electron microscopy, and the porosity, tensile strength, and basic fibroblast growth factor (bFGF) release profiles from chitosan sponge were examined in vitro. The morphology of the chitosan scaffolds presented a typical microporous structure, with the pore size ranging from 50 to 200 μm. The porosity of chitosan scaffolds with different concentrations was approximately 75–85%. A decreasing tendency for porosity was observed as the concentration of the chitosan increased. The relationship between the tensile properties and chitosan concentration indicated that the ultimate tensile strength for the sponge increased with a higher concentration. The in vitro bFGF release study showed that the higher the concentration of chitosan solution became, the longer the releasing time of the bFGF from the chitosan sponge was.
- Open Access
- 1 January 2014
- Published by Wiley in BioMed Research International
- Vol. 2014, 1-9
Biological Safety of Fish (Tilapia) Collagen
Marine collagen derived from fish scales, skin, and bone has been widely investigated for application as a scaffold and carrier due to its bioactive properties, including excellent biocompatibility, low antigenicity, and high biodegradability and cell growth potential. Fish type I collagen is an effective material as a biodegradable scaffold or spacer replicating the natural extracellular matrix, which serves to spatially organize cells, providing them with environmental signals and directing site-specific cellular regulation. This study was conducted to confirm the safety of fish (tilapia) atelocollagen for use in clinical application. We performedin vitroandin vivobiological studies of medical materials to investigate the safety of fish collagen. The extract of fish collagen gel was examined to clarify its sterility. All present sterility tests concerning bacteria and viruses (including endotoxin) yielded negative results, and all evaluations of cell toxicity, sensitization, chromosomal aberrations, intracutaneous reactions, acute systemic toxicity, pyrogenic reactions, and hemolysis were negative according to the criteria of the ISO and the http://dx.doi.org/10.13039/501100003478 Ministry of Health, Labour and Welfare. The present study demonstrated that atelocollagen prepared from tilapia is a promising biomaterial for use as a scaffold in regenerative medicine.
- 1 January 2014
- Published by Wiley in BioMed Research International
- Vol. 2014, 1-9
Open AccessBiological Safety of Fish (Tilapia) Collagen
Marine collagen derived from fish scales, skin, and bone has been widely investigated for application as a scaffold and carrier due to its bioactive properties, including excellent biocompatibility, low antigenicity, and high biodegradability and cell growth potential. Fish type I collagen is an effective material as a biodegradable scaffold or spacer replicating the natural extracellular matrix, which serves to spatially organize cells, providing them with environmental signals and directing site-specific cellular regulation. This study was conducted to confirm the safety of fish (tilapia) atelocollagen for use in clinical application. We performedin vitroandin vivobiological studies of medical materials to investigate the safety of fish collagen. The extract of fish collagen gel was examined to clarify its sterility. All present sterility tests concerning bacteria and viruses (including endotoxin) yielded negative results, and all evaluations of cell toxicity, sensitization, chromosomal aberrations, intracutaneous reactions, acute systemic toxicity, pyrogenic reactions, and hemolysis were negative according to the criteria of the ISO and the http://dx.doi.org/10.13039/501100003478 Ministry of Health, Labour and Welfare. The present study demonstrated that atelocollagen prepared from tilapia is a promising biomaterial for use as a scaffold in regenerative medicine.
- Open Access
- 1 January 2014
- Published by Wiley in BioMed Research International
- Vol. 2014, 1-4
D-Glucosamine Promotes Transfection Efficiency during Electroporation
D-Glucosamine is a useful medicament in various fields of medicine and dentistry. With respect to stability of the cell membrane, it has been reported that bradykinin-induced nociceptive responses are significantly suppressed by the direct application of D-glucosamine. Electroporation is usually used to effectively introduce foreign genes into tissue culture cells. Buffers for electroporation with or without D-glucosamine are used in experiments of transfection vectors. This is the first study to indirectly observe the stability and protection of the osteoblast membrane against both electric stress and gene uptake (the proton sponge hypothesis: osmotic rupture during endosomes prior to fusion with lysosomes) in electroporation with D-glucosamine application. The transfection efficiency was evaluated as the fluorescence intensity of the transfected green fluorescent protein (GFP) in the cultured cells (osteoblasts; NOS-1 cells). The transfection efficiency increased over 30% in the electroporation samples treated with D-glucosamine-supplemented buffer after one day. The membrane absorption of D-glucosamine is the primary mechanism of membrane stress induced by electric stress. This new function of D-glucosamine is useful and meaningful for developing more effective transformation procedures.
- 1 January 2014
- Published by Wiley in BioMed Research International
- Vol. 2014, 1-4
Open AccessD-Glucosamine Promotes Transfection Efficiency during Electroporation
D-Glucosamine is a useful medicament in various fields of medicine and dentistry. With respect to stability of the cell membrane, it has been reported that bradykinin-induced nociceptive responses are significantly suppressed by the direct application of D-glucosamine. Electroporation is usually used to effectively introduce foreign genes into tissue culture cells. Buffers for electroporation with or without D-glucosamine are used in experiments of transfection vectors. This is the first study to indirectly observe the stability and protection of the osteoblast membrane against both electric stress and gene uptake (the proton sponge hypothesis: osmotic rupture during endosomes prior to fusion with lysosomes) in electroporation with D-glucosamine application. The transfection efficiency was evaluated as the fluorescence intensity of the transfected green fluorescent protein (GFP) in the cultured cells (osteoblasts; NOS-1 cells). The transfection efficiency increased over 30% in the electroporation samples treated with D-glucosamine-supplemented buffer after one day. The membrane absorption of D-glucosamine is the primary mechanism of membrane stress induced by electric stress. This new function of D-glucosamine is useful and meaningful for developing more effective transformation procedures.