JIJohan Iraeus

Johan Iraeus

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Johan Iraeus has a total of 56 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Validation of a generic finite element vehicle buck model for near-side crashes

    by Casey G. Costa, Karan Devane, Joel D. Stitzel, Johan Iraeus, Ashley A. Weaver

    ObjectiveFinite element (FE) reconstructions of motor vehicle crashes using human body models are effective tools for developing a better understanding of occupant kinematics and injuries in real-world lateral crash conditions, but current near-side reconstruction methods are limited by the paucity of full-scale FE vehicle models. The objective of this study was to validate a generic vehicle model equipped with left-side airbags and intrusion capability by simulating a series of near-side crash tests for a range of vehicles and assessing model accuracy using objective evaluation methods.MethodsMoving deformable barrier crash tests were reconstructed for five common vehicle classifications (compact passenger, mid-size passenger, sport utility vehicle, pickup truck, and van) using an updated version of a previously developed simplified vehicle model. Unknown vehicle and intrusion properties (pretensioner force, seatback airbag pressure, curtain airbag pressure, door panel stiffness, ratio of dynamic-to-static intrusion, intrusion velocity, and intrusion scaling factor) were estimated by parameterizing them across 224 simulations per crash test using a Latin hypercube design of experiments. Model accuracy was assessed for 13 anthropomorphic test device signals using the Correlation and Analysis (CORA) objective rating method and injury metric comparisons.ResultsMaximum ratings of 0.69, 0.67, 0.52, 0.52, and 0.62 were achieved for the compact passenger, midsize passenger, sport utility vehicle, pickup truck, and van classifications, respectively. On average, the abdomen displayed the most accurate behavior (0.51 +/- 0.12), followed by the thorax (0.50 +/- 0.10) and head (0.50 +/- 0.07). The pelvis displayed the least accurate behavior (0.46 +/- 0.18) of any region. Reconstructions overpraedicted injury metrics in all cases.ConclusionsAll vehicles achieved "fair" biofidelity ratings and the compact passenger and midsize passenger vehicles achieved "good" biofidelity ratings, validating them for kinematic evaluations with vehicle-to-vehicle nearside crash reconstructions. Regression models were developed for injuries and CORA ratings and can be used to optimize vehicle parameters in future studies.


  • Open Access

    Quantifying rider posture variability in powered two- and three-wheelers for safety assessment

    by Linus Lundin, Maria Oikonomou, Athanasios Lioras, Athanassios Mihailidis, Bengt Pipkorn, Lambros Rorris, Mats Y. Svensson, Johan Iraeus

    ObjectiveInjury outcomes for powered two- and three-wheeler (PTW) riders are influenced by the rider posture. To enable analysis of PTW rider accidents and development of protection systems, detailed whole-body posture data is needed. Therefore, the aim of this study is to fill this gap by providing collections of average male whole-body postures, including subpopulation variability, for different PTW types. This will enable future studies to explore the influence of PTW rider posture variation and to support safety system development.Methods3D photometric measurements of 51 anatomical landmarks were recorded on 20 (50th percentile male) volunteers in their preferred riding postures across three PTW types (naked, scooter, and touring). Following an outlier removal process, a principal component analysis (PCA) was performed to calculate average postures and principal components (PCs), to describe the observed posture variation, for each PTW. The visualization of the PCs was facilitated through kinematic linkage representations, connecting anatomical landmarks and estimated joint centers to form segments and characteristic joint angles.ResultsThe first seven PCs explained 80% of the variance in posture for each of the three PTWs. Across PTWs, these PCs frequently described combinations of postural features including variation in fore-aft seat positions, pelvic tilt, spinal curvature, head position, and extremity flexion-extension. Analysis revealed distinct differences in average postures across the three PTWs, on average, 10 +/- 9 degrees for the characteristic joint angles within a min-to-max range between the three PTWs. However, for all three PTWs, the variability between volunteers in characteristic joint angles on the same PTW were on average more than twice as large within a +/- 2 SD range (26 +/- 11 degrees).ConclusionsThe results suggest that PTW rider posture variation must be addressed by involving simultaneous adjustments of multiple body parts, as described by each of the first seven PCs, as a direct consequence of the human body interconnectedness. Furthermore, the study's findings challenge conventional assumptions that the relative distance between PTWs' handlebar, seat, and foot support predominantly influences rider postures. Instead, the research demonstrates that individual variability has a substantial influence on rider posture and should be considered in PTW safety development.


  • Open Access

    A First Step Toward a Family of Morphed Human Body Models Enabling Prediction of Population Injury Outcomes

    by Karl-Johan Larsson, Jonas Östh, Johan Iraeus, Bengt Pipkorn

    The injury risk in a vehicle crash can depend on occupant specific factors. Virtual crash testing using finite element human body models (HBMs) to represent occupant variability can enable the development of vehicles with improved safety for all occupants. In this study, it was investigated how many HBMs of different sizes that are needed to represent a population crash outcome through a metamodel. Rib fracture risk was used as an example occupant injury outcome. Morphed HBMs representing variability in sex, height, and weight within defined population ranges were used to calculate population variability in rib fracture risk in a frontal and a side crash. Two regression methods, regularized linear regression with second-order terms and Gaussian process regression (GPR), were used to metamodel rib fracture risk due to occupant variability. By studying metamodel predictive performance as a function of training data, it was found that constructing GPR metamodels using 25 individuals of each sex appears sufficient to model the population rib fracture risk outcome in a general crash scenario. Further, by utilizing the known outcomes in the two crashes, an optimization method selected individuals representative for population outcomes across both crash scenarios. The optimization results showed that 5–7 individuals of each sex were sufficient to create predictive GPR metamodels. The optimization method can be extended for more crashes and vehicles, which can be used to identify a family of HBMs that are generally representative of population injury outcomes in future work.


  • Analysis of the spinal 3D motion of postmortem human surrogates in nearside oblique impacts

    by Ana Piqueras, Bengt Pipkorn, Johan Iraeus, Ana I. Lorente, Óscar Juste-Lorente, Mario Maza, Francisco J. López-Valdés

    Objective: The objective of this study is to analyze the 6 degrees of freedom (DOF) motion of the spine using the finite helical axis (FHA) in three postmortem human surrogates (PMHS) sled tests. Methods: The sled test configurations corresponded to a 30° nearside oblique impact at 35 km/h. Two different restraint system versions (RSv) were used. RSv1 was used for PMHS A and B while RSv2 was used for PMHS C. The 6 DOF motion of the head and three selected vertebrae have been analyzed using the FHA which describes the 3 D motion of a rigid body between two instants of time as a rotation about and a translation along a unit vector. A minimal amount of rotation is necessary to the FHA calculation, thus the FHA components have been calculated based on a pre-defined interval of 8° of rotation. Results: The analysis of the FHA components demonstrated right lateral bending until around 100 ms, when the rebound phase was reached and the head and the lower spine undergoes left lateral bending. The three PMHS exhibited, in general, flexion movement of the whole body and torsion to the right side of the occupant. This general motion can be associated to the effect of the seatbelt acting as a fulcrum of the rotational movement of the bony landmarks. The interaction of the PMHS with the retention system can be noted by analyzing the time in which the head and the upper spine initiated the rotation and the sudden changes of rotational direction of the three PMHS’s head. Conclusions: The rotational analyses have shown to be more sensitive to experimental events than the trajectory analyses for the studied physical tests. Additionally, the results presented in the present study contributes to the analysis of the body kinematics during an oblique impact and adds new experimental data for Human Body Models (HBM) and Anthropometric Test Devices (ATD) benchmarking.

  • Open Access

    Finite element human body models with active reflexive muscles suitable for sex based whiplash injury prediction

    by I Putu Alit Putra, Johan Iraeus, Fusako Sato, Mats Y. Svensson, Robert Thomson

    Previous research has not produced a satisfactory resource to study reflexive muscle activity for investigating potentially injurious whiplash motions. Various experimental and computational studies are available, but none provided a comprehensive biomechanical representation of human response during rear impacts. Three objectives were addressed in the current study to develop female and male finite element human body models with active reflexive neck muscles: 1) eliminate the buckling in the lower cervical spine of the model observed in earlier active muscle controller implementations, 2) evaluate and quantify the influence of the individual features of muscle activity, and 3) evaluate and select the best model configuration that can be used for whiplash injury predictions. The current study used an open-source finite element model of the human body for injury assessment representing an average 50th percentile female anthropometry, together with the derivative 50th percentile male morphed model. Based on the head-neck kinematics and CORelation and Analyis (CORA) tool for evaluation, models with active muscle controller and parallel damping elements showed improved head-neck kinematics agreement with the volunteers over the passive models. It was concluded that this model configuration would be the most suitable for gender-based whiplash injury prediction when different impact severities are to be studied.


  • Open Access

    Hello, world! VIVA+: A human body model lineup to evaluate sex-differences in crash protection

    by Jobin John, Corina Klug, Matej Kranjec, Erik Svenning, Johan Iraeus

    Finite element Human Body Models are increasingly becoming vital tools for injury assessment and are expected to play an important role in virtual vehicle safety testing. With the aim of realizing models to study sex-differences seen in the injury- and fatality-risks from epidemiology, we developed models that represent an average female and an average male. The models were developed with an objective to allow tissue-based skeletal injury assessment, and thus non-skeletal organs and joints were defined with simplified characterizations to enhance computational efficiency and robustness. The model lineup comprises female and male representations of (seated) vehicle occupants and (standing) vulnerable road users, enabling the safety assessment of broader segments of the road user population. In addition, a new workflow utilized in the model development is presented. In this workflow, one model (the seated female) served as the base model while all the other models were generated as closely-linked derivative models, differing only in terms of node coordinates and mass distribution. This approach opens new possibilities to develop and maintain further models as part of the model lineup, representing different types of road users to reflect the ongoing transitions in mobility patterns (like bicyclists and e-scooter users). In this paper, we evaluate the kinetic and kinematic responses of the occupant and standing models to blunt impacts, mainly on the torso, in different directions (front, lateral, and back). The front and lateral impacts to the thorax showed responses comparable to the experiments, while the back impact varied with the location of impact (T1 and T8). Abdomen bar impact showed a stiffer load-deflection response at higher intrusions beyond 40 mm, because of simplified representation of internal organs. The lateral shoulder impact responses were also slightly stiffer, presumably from the simplified shoulder joint definition. This paper is the first in a series describing the development and validation of the new Human Body Model lineup, VIVA+. With the inclusion of an average-sized female model as a standard model in the lineup, we seek to foster an equitable injury evaluation in future virtual safety assessments.


  • Assessment of in situ chest deflection of post mortem human subjects (PMHS) and personalized human body models (HBM) in nearside oblique impacts

    by Ana Piqueras, Bengt Pipkorn, Johan Iraeus, Mario Maza-Frechín, Francisco J. López-Valdés

    The present study has three objectives: First, to analyze the chest deflection measured in nearside oblique tests performed with three post mortem human subjects (PMHS). Second, to assess the capab...


  • Open Access

    A numerical study on the safety belt‐to‐pelvis interaction

    by Hosein Naseri, Johan Iraeus, Håkan Johansson

    The slide of the lap belt over the iliac crest of the pelvis during vehicle frontal crashes can substantially increase the risk of some occupant injuries. A multitude of factors, related to occupants or the design of belt, are associated with this phenomenon. This study investigates safety belt‐to‐pelvis interaction and identifies the most influential parameters. It also explores how initial lap belt position influences the interaction between lap belt and pelvis. A finite element model of the interaction between lap belt with pelvis through a soft tissue part was created. Belt angle, belt force, belt loading rate and belt‐to‐body friction as belt design parameters, and pelvis angle, constitute parameters of soft tissue, and soft tissue‐to‐pelvis friction as occupant parameters were inspected. For the soft tissue part, subcutaneous adipose tissue with different thicknesses was created and the effect initial lap belt position may have on lap belt‐to‐pelvis interaction was investigated. The influential parameters have been identified as: the belt angle and belt force as belt design parameters and the pelvis angle and compressibility of soft tissue as occupant parameters. The risk for the slide of lap belt over the iliac crest of the pelvis was predicted higher as the initial lap belt positions goes superior to the pelvis. Of different submarining parameters, the lap belt angle represents the most influential one. The lap belt‐to‐pelvis interaction is influenced by the thickness of subcutaneous adipose tissue between lap belt and pelvis indicating a higher risk for obese occupants.


  • Open Access

    Factors Affecting the Numerical Response and Fracture Location of the Ghbmc M50 Rib in Dynamic Anterior-Posterior Loading

    by Claire Victoria Rampersadh, Amanda M. Agnew, Skye Malcolm, Donata Gierczycka, Johan Iraeus, Duane Cronin

    Rib fractures are common traumatic injuries, with links to increased morbidity and mortality. Finite element ribs from human body models have struggled to predict the force-displacement response, force and displacement at fracture, and the fracture location for isolated rib tests. In the current study, the sensitivity of a human body model rib to boundary conditions, material properties, and geometry was investigated systematically to quantify contributions to response. The boundary conditions and material properties had the greatest influence on the force-displacement response, whereas the geometry had the greatest effect on fracture location. The resulting uncalibrated model closely predicted experimental average force-displacement response and fracture location.