Yang Liu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yang Liu has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
Wafaa Mohamed Shaban
3 shared publicationsXiaojuan Liu
3 shared publications- Yong Ye
College of Civil Engineering, Huaqiao University, Xiamen 361021, China
3 shared publications - Chaozhong Zhang
College of Civil Engineering, Tongji University, Shanghai 200092, P. R. China
2 shared publications - Hai Chen
College of Harbour and Coastal Engineering, Jimei University, Xiamen 361021, China
2 shared publications Jie Liu
2 shared publications
Latest Publications
- 15 June 2026
- Published by Elsevier in Structures
- Vol. 90
Axial compressive behavior of slender stone-encased concrete-filled steel tubular columns: Numerical and theoretical study
- 15 June 2026
- Published by Elsevier in Structures
- Vol. 90
Axial compressive behavior of slender stone-encased concrete-filled steel tubular columns: Numerical and theoretical study
- 11 February 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 514
Unified bond model for epoxy-coated reinforcement in concrete under monotonic and cyclic loading: Experiments and validation
- 11 February 2026
- Published by Elsevier in Construction and Building Materials
- Vol. 514
Unified bond model for epoxy-coated reinforcement in concrete under monotonic and cyclic loading: Experiments and validation
- 9 January 2026
- Published by Elsevier in Structures
- Vol. 84
Axial compressive behavior and constitutive model of stone under dual-composite confinement by concrete-filled steel tube
- 9 January 2026
- Published by Elsevier in Structures
- Vol. 84
Axial compressive behavior and constitutive model of stone under dual-composite confinement by concrete-filled steel tube
- 15 April 2025
- Published by Elsevier in Structures
- Vol. 76
Behavior of SSC-filled plastic-lined steel tube (SSC-PLST) slender columns under eccentric compression
- 15 April 2025
- Published by Elsevier in Structures
- Vol. 76
Behavior of SSC-filled plastic-lined steel tube (SSC-PLST) slender columns under eccentric compression
- Open Access
Axial Compressive Behavior and Calculation Model for Axial-Compressive-Load-Carrying Capacity of Locally Corroded RC Short Columns
The individual effects of the main reinforcement corrosion and stirrup corrosion on the axial compressive behavior of reinforced concrete (RC) columns were evaluated through axial compression tests on 10 full-scale short columns. The primary experimental parameters were the corrosion location and the corrosion ratio of the steel bar. The electrochemical accelerated corrosion method was applied on nine of the columns, including three columns corroded in the main reinforcement, three columns corroded in the stirrup, and three columns corroded in both the main reinforcement and stirrup. The full-field displacement of the column and strain of concrete were evaluated using a non-contact 3D-DIC (digital image correlation) technique. The results indicated that, with the increase in the main reinforcement corrosion ratio, the width of the longitudinal corrosion crack increased. The transverse corrosion cracks appeared when the stirrup corrosion ratio is larger than 8%, and the increase in stirrup corrosion ratio increased the crack number, but had little effect on the crack width. Compared to the non-corroded RC column, the peak load of specimens with main reinforcement corrosion ratios of 8.02%, 9.01%, and 19.27% decreased by 10.53%, 13.56%, and 19.77%, respectively, and that of the specimens with stirrup corrosion ratios of 7.08%, 12.33%, and 24.36% decreased by 11.59%, 12.07%, and 17.15%, respectively. The axial-compressive-load-carrying capacity of RC columns decreased almost linearly as the corrosion ratio of the main reinforcement increases, while it exhibited an approximately bilinear degradation as the corrosion ratio of the stirrups increases. The stirrup corrosion ratio had less effect on the axial compressive loading capacity of the RC column when it was larger than 7.5%. A model for calculating the axial-compressive-load-carrying capacity of the corroded RC short columns was developed based on the impact mechanisms of the corroded main reinforcement and stirrups on the columns’ axial compressive behavior. The calculated results closely matched the test data, demonstrating that the proposed model can reliably predict the residual load-carrying capacity of corroded columns.
Open AccessAxial Compressive Behavior and Calculation Model for Axial-Compressive-Load-Carrying Capacity of Locally Corroded RC Short Columns
The individual effects of the main reinforcement corrosion and stirrup corrosion on the axial compressive behavior of reinforced concrete (RC) columns were evaluated through axial compression tests on 10 full-scale short columns. The primary experimental parameters were the corrosion location and the corrosion ratio of the steel bar. The electrochemical accelerated corrosion method was applied on nine of the columns, including three columns corroded in the main reinforcement, three columns corroded in the stirrup, and three columns corroded in both the main reinforcement and stirrup. The full-field displacement of the column and strain of concrete were evaluated using a non-contact 3D-DIC (digital image correlation) technique. The results indicated that, with the increase in the main reinforcement corrosion ratio, the width of the longitudinal corrosion crack increased. The transverse corrosion cracks appeared when the stirrup corrosion ratio is larger than 8%, and the increase in stirrup corrosion ratio increased the crack number, but had little effect on the crack width. Compared to the non-corroded RC column, the peak load of specimens with main reinforcement corrosion ratios of 8.02%, 9.01%, and 19.27% decreased by 10.53%, 13.56%, and 19.77%, respectively, and that of the specimens with stirrup corrosion ratios of 7.08%, 12.33%, and 24.36% decreased by 11.59%, 12.07%, and 17.15%, respectively. The axial-compressive-load-carrying capacity of RC columns decreased almost linearly as the corrosion ratio of the main reinforcement increases, while it exhibited an approximately bilinear degradation as the corrosion ratio of the stirrups increases. The stirrup corrosion ratio had less effect on the axial compressive loading capacity of the RC column when it was larger than 7.5%. A model for calculating the axial-compressive-load-carrying capacity of the corroded RC short columns was developed based on the impact mechanisms of the corroded main reinforcement and stirrups on the columns’ axial compressive behavior. The calculated results closely matched the test data, demonstrating that the proposed model can reliably predict the residual load-carrying capacity of corroded columns.
- Open Access
Mechanical and Deformation Performance of Masonry Walls with Low-Strength Mortar Retrofitting Using Spray-on Polyurethane Coating
This study aimed to investigate the feasibility and effectiveness of spray-on polyurethane coating as a seismic strengthening method for rural masonry buildings. Three masonry wall specimens were tested under cyclic lateral loading, including a control specimen, a single-side strengthened specimen, and a double-side strengthened specimen. Digital image correlation (DIC) techniques were used to evaluate full-field strain, crack width, and failure progression in a non-contact manner. The seismic performances were compared in terms of failure mode, hysteretic behavior, skeleton curve, deformation performance, energy dissipation capacity, and stiffness degradation. Results indicated that a spray-on polyurethane coating effectively delayed the onset and progression of cracks, postponing the peak load and slowing strength and stiffness degradation. Compared to the unstrengthened specimen, the bearing capacity, ultimate displacement, and cumulative energy dissipation of the single-side strengthened specimen increased by 20%, 60%, and 514%, respectively. Compared to the single-side strengthened specimen, the double-side strengthened specimen BW-D exhibited improved integrity, deformation capacity, and energy dissipation capacity. Its ultimate displacement and cumulative energy dissipation increased by 28% and 10%, respectively.
Open AccessMechanical and Deformation Performance of Masonry Walls with Low-Strength Mortar Retrofitting Using Spray-on Polyurethane Coating
This study aimed to investigate the feasibility and effectiveness of spray-on polyurethane coating as a seismic strengthening method for rural masonry buildings. Three masonry wall specimens were tested under cyclic lateral loading, including a control specimen, a single-side strengthened specimen, and a double-side strengthened specimen. Digital image correlation (DIC) techniques were used to evaluate full-field strain, crack width, and failure progression in a non-contact manner. The seismic performances were compared in terms of failure mode, hysteretic behavior, skeleton curve, deformation performance, energy dissipation capacity, and stiffness degradation. Results indicated that a spray-on polyurethane coating effectively delayed the onset and progression of cracks, postponing the peak load and slowing strength and stiffness degradation. Compared to the unstrengthened specimen, the bearing capacity, ultimate displacement, and cumulative energy dissipation of the single-side strengthened specimen increased by 20%, 60%, and 514%, respectively. Compared to the single-side strengthened specimen, the double-side strengthened specimen BW-D exhibited improved integrity, deformation capacity, and energy dissipation capacity. Its ultimate displacement and cumulative energy dissipation increased by 28% and 10%, respectively.
- 8 February 2023
- Published by Elsevier in Structures
- Vol. 49, 903-917
Deformation limits of corroded reinforced concrete columns
- 8 February 2023
- Published by Elsevier in Structures
- Vol. 49, 903-917
Deformation limits of corroded reinforced concrete columns
- 25 October 2022
- Published by Elsevier in Journal of Building Engineering
- Vol. 63
Seismic behavior of RCS frame joints applied with high-strength bolts-end plate connection
- 25 October 2022
- Published by Elsevier in Journal of Building Engineering
- Vol. 63
Seismic behavior of RCS frame joints applied with high-strength bolts-end plate connection